SIWOB Series MCB: Product description : SIWOB series MCB Scope of application They are applicable to the circuit with rated voltage of up to 400V and rated current of up to 125A to provide overcurrent protection for line facilities and electrical equipment in the buildings and similar places or for infrequent make-break operation Work environment in use and installation conditions Work environment in use and installation conditions The altitude of installation site shouId not be more than 2,000m; The ambient air temperature is -5 - +40, and the average temperature within 24h shouId be not higher than +35, When the maximum temperature is +40, the air relative humidity is not higher than 50%, and a higher relative humidity can be tolerable at relatively low temperature for examplethe relative humidity is 90% at +20; Pollution degree 2 (i.e.There is non-conductive pollution under normal circumstances , but transient conductivity is taken into consideration due to accidental condensation), Vertical installation, error is ±5° Terminal electrical equipment is installed on TH35-7 mounting rails Product origin : Shenyang Key Specifications/Special Features : SIWOB-1A~125A/4P C
Technical data 1/ pole no.: 1p, 1p+n, 2p, 3p, 3p+n, 4p 2/ rated voltage: ac 230/400v 3/ rated current (a): 1, 2, 3, 4, 6, 10, 13, 16, 20, 25, 32, 40, 50, 63 4/ tripping curve: b. C. D 5/ rated short-circuit capacity(icn): 6000a 6/ rated frequency: 50/60hz Panel mounting 12pieces one middle box, 20middle boxes one carton
Characteristics: Standard: IEC60898 Rated current In (A): 1,2,3,4,6,10,13,16,20,25,32,40,50,63 Rated voltage Ue (V): 230/400 Poles: 1P, 1P+N, 2P, 3P, 3P+N4P Rated insulation voltage Ui (V): 500 Rated impulse withstand voltage (V): 6000 Rated breaking capacity: 10KA Rated frequency: 50/60Hz Trip curve: B, C, D Thermal operating limit: (1.13~1.45)¡ÁIn Energy limiting cass: 3 Mechanical lfe: 20 000 Electrical lfe: 4000 Mount: on 35mm DIN rail. The Gross weight 14kg The dimension 46.5*23.5*17 cm M.O.Q 500pcs (Samples Excepted) Payment term T/T, L/C,D/P,O.A Delivery time Usually 25 days (Negotiable for different order quantity) Promote the products with our own brand (As one of our agents in your market) Promote the products with neutral packing.
FeaturesComply with the main International IEC 898 standard & specifications - Ratings 2A, 4A, 6A, 10A, 16A, 20A, 25A, 32A,40A, 50A, 63A - 1P, 2P, 3P, 3P+SN available (4P & 1P+SN on request) - 18mm modular width per pole - Suitable for DIN rail mounting in OEM / panel - builder enclosures - Padlock or seal can be fitted in ON or OFF position - Current limiting operation under fault conditions - Wide range of accessories SpecificationsMagnetic release: Test current Tripping time B 3 In5 In t > 0.1st < 0.1s Application: Electrical heating,Water heater,Stoves Test current Tripping time C 5 In10 In t >0.1st < 0.1s Application: Lighting,Socket outlets,Small motor Test current Tripping time D 10 In20 In t > 0.1st < 0.1s Application: Control and protection of circuits having important transient inrush currents (large motor) Thermal release: Tripping time Test current t > 1 h(In < 63 A) 1.13 In t > 2 h(In > 63 A) t > 1 h(In < 63 A) 1.45 In t > 2 h(In > 63 A) 1s < t < 60s (In32 A)
The main contacts of circuit breaker mainly are intended to be connected to circuits, the rated voltage of which does not exceed 1000V A.C. or 1500V D.C. - Circuit Breakers for use in industrial environments. - Ratings 0.5A, 1A, 2A, 4A, 6A, 10A, 16A, 20A,25A, 32A, 40A, 50A, 63A - Current limiting operation under fault conditions - 1P, 2P, 3P, 3P+SN available (4P & 1P+SN on request) - Padlock or seal can be fitted in ON or OFF position - Suitable for DIN rail mounting in OEM / panel builder enclosures - Wide range of accessories a. Use at DC (the magnetic tripping current is +/-40% higher than at A.C.) b. Use at 400 Hz (the magnetic tripping current is ~50% higher than A.C. 50/60 Hz) c. Shock resistance (in X, Y, Z direction) d. Vibration resistance (in X, Y, Z direction) e. Operation temperature (from -55oC to +55oC) SpecificationsComply with the main International IEC 947-2 standard & specifications. Magnetic release: GE Power Control offers instantaneous tripping ranges - release between 3 and 5 In - release between 5 and 10 In - release between 10 and 20 In Thermal release: Tripping time Test current t > 1 h(In < 63 A) 1.05 In t > 2 h(In > 63 A) t > 1 h(In < 63 A) 1.30 In t > 2 h(In > 63 A)
Features- Ratings 2A, 4A, 6A, 10A, 16A, 20A, 25A, 32A, 40A - 1P, 2P, 3P, 3P+N available (4P & 1P+SN on request) - 18mm modular width per pole - Suitable for DIN rail mounting in OEM / panel builder enclosures - Padlock or seal can be fitted in ON or OFF SpecificationsMagnetic release: Curve B: Test current 3 In, t > 0.1s 5 In, t < 0.1s Only for resistive load such as: Electrical heating,Water heater, Stoves Curve C: Test current 5 In, t >0.1st 10 In, t < 0.1s Usual load such as: Lighting, Socket outlets & Small motor
Contactor & Relay, Dol Starters, Capacitors, MCB, RCCB, MCCB MPCB, SFU & HRC Fuse Changeover Switch. Cable & Wires, Lugs & Gland, Rotry & Limit-Switches,Meters, Proximity & Senso, Panel Accessories.
Provide Miniature Circuit Breaker, contact email@example.com for more information. Pole No:1,1P+N,2,3,3P+N,4 Rated voltage:AC 230/400V Rated current(A): 1,2,3,4,6,10,13,16,20,25,32,40,50,63
The rates may vary from 1 to 10 $ as per size and specification guages.We are into manufacturing since many years and our range goes upto 19 tpn box manyfacturing. We also make d.P boxes as per customer specification. Minimum lot size of 100 pcs
Specifications 1.Om1 circuit breaker 2.Used for circuit of a.C. 50hz 3.Rated operating voltage ac 400v 4.Iec60947-2 standard Om1 moulded case circuit breaker (mccb) Application: Om1 series moulded case circuit breaker is one of products developed and manufactured by adopting international advanced technology. It is supplied with rated insulating voltage 800vand used for circuit of a.C. 50hz, rated operating voltage ac 400v (or below), rated operating current up to 800a for infrequent changing over and starting of the motors.The products con-forms to iec60947-2 standard. Ccc, ce, sgs.Ul
For over a quarter of a century, we have been associated with these electrical items and have sufficient knowledge and experience regarding quality. The electrical main switches offer the most cost effective, flexible and high performing solutions. These main switches exhibit the highest breaking capacity, have auxiliary contacts for electronic circuits and are compact in design. We have a wide range of circuit breaker equipment, like mcb . The range of mcb boards are highly durable and allow the installer maximum flexibility. This offers the choice of switch-disconnector incomers, rcd incomers, mccb incomers or direct connection.
Specification: 1.Rate current:1-63a 2.Rtated voltage:ac230/400v 3.Pole no:1p/1p+n/2p/3p/3p+n/4p 4.Curve:b/c/d 5.Breaking capacity:4.5/6/10ka About the detailed product informations, please feel free to visit our website:www.Ru-lena.Com Standard export packing
MCB enclose waterprrof box: 1.4P or 8P; 2.Material:PC or ABS; 3.IP66; 4.With MCB or without MCB. firstname.lastname@example.org http://www.new-pv.com/products_show.asp?id=220
MW MY Miniature Circuit Breaker Application MW MY series circuit breaker is used in lighting distribution system or motor distribution system for protection overload and short-circuits in the system. The product is neoteric in structure, reliable and excellent in performance. It has high breaking capacity, can trip quickly, and its case and items are adopted by high fire-resistant and shockproof plastic. The product, with long life, is mainly used in AC 50HZ/60HZ single-pole 230V or two, three, four poles 400V circuit for overload and short-circuit protection as well as for infrequent on-and-off switching electric equipment and lighting circuit in normal case. The products comply with IEC 60898.