-Frequency 50/60 Hz -Insulation class of motor windings: Class F -Protection rate: IP66/67 -Noise below 55Db. Wooden box.
-Frequency 50/60 Hz -Insulation class of motor windings: Class F -Protection rate: IP66/67 -Noise below 55Db. Wooden box.
-Frequency 50/60 Hz -Insulation class of motor windings: Class F -Protection rate: IP66/67 -Noise below 55Db. Wooden box.
It can be held in pockets, handbags and briefcases for the emergent self defense, which is to deceive and ward off the attackers. The content is super high concentration pepper extracts. The natural organic ingredient is non-toxic, non-flammable, and environmentally safe. The effectiveness can disappear in 20 minutes automatically or by using the clean water to wash the face. Parameter: Size: Height 11.3cm Diameter3.5cm Capacity: 60ML There are totally three models available for your choice. Usage: Easy to use Spray to the face of the violator with an accurate stream, which can make the violator lose sight and counteractive ability temporarily. Do not spray against the wind. Notice: The buyer represents that the security products ordered will be used in a lawful manner and that he/she is of legal age to possess such items. We will not bear the responsibility if it turns out negative consequences as used improperly. Carton box or other packing.
It is an intelligent anti-theft and anti-robbery product. It can hold cash and valuable items. When the alarm system starts, it can not be approached or moved. It has elegant appearance, solid structure and reliable performance. Now there are four specifications available for your choice. Also we can produce other specifications according to clients' requirements. Model LD-A: L500*W365*H255(mm) Model LD-B: L405*W305*H180(mm) Model LD-C: 400*250*150(mm) Model LD-D: 340*220*150(mm). Carton box or according to clients requirement.
Locks and pins for JCB ,Capterpillar, Komatsu , Hitachi , Hyundai , Daewoo , Esco , Case , Kobelco, Volvo Etc .
We supply Co-rotating parallel twin screws extruder for PA/PBT/PC compounding with flame retardants and up to 30% chipped/long Glass Fiber, PC/ABS alloy, PP/PA alloy, PC/PB alloy, ABS color masterbatch. Salient Features of co-rotating twin screw extruder SAT52: 1) Main motor 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 300~400kg/h 5) One mixer, one main feeder and one side feeder 6) One soft water cooling system and one vacuum system 7) Strand cutting unit with water bath, air blower, pelletizier and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply twin screw extruder for PLA/PE filling with (cassava/corn/potato)starch, PBS degassing, PLA/PBS alloy and so on. Salient Features of co-rotating twin screw extruder SAT65: 1) Main motor 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-400rpm 4) The output capacity: 150~250kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Air cooling die face cutting system with cyclone and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply Co-rotating parallel twin screws extruder for PE/PP filling with high percentage of up to 82% CaCO3/ 60%Talc/70%TiO2/45%Carbon powder/and 30% inorganic and organic pigments. Salient Features of co-rotating twin screw extruder EC52: 1) Main motor 55kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 150~200kg/h 5) One mixer, one main feeder and one side feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Strand cutting unit with water bath, air blower, pelletizier and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply Co-rotating parallel twin screws extruder for PE/PVC /HFFR/ (peroxide and silane based) XLPE cable material compounding. All the raw material will be feed into twin screw extruder first for compounding. Then falls into single screw extruder for cooling down and extrusion. Salient Features of two stage extruder EC65/TDD180 for PVC: 1) Main motor of twin screw extruder 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 400~600kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) One single screw extruder with motor 55kw, L/D=9 8) Air cooling die face cutting system with cyclone and classifier 9) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We have two type of Lab machine: Lab22 and Lab30 with three type cutting system: strand, water ring and air cooling die face cutting. Salient Features of co-rotating twin screw extruder Lab22: 1) Main motor 4kw, L/D=42 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 5~15kg/h 5) One mixer, one main feeder and one side feeder 6) Strand cutting unit with water bath, air blower, pelletizier and classifier; 7) Control panel, soft water cooling system and vacuum system are inside the base of extruder. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
39- liters laboratory flotation machine is applied in ore dressing by the method of laboratory floating. It is concatenation floatation machine with several sets of machines. And the number of chutes is even from 1 to 10. It is left-type or right-type according to user's demand. Structure and features: Laboratory flotation machine with 39 liters is impeller mechanical flotation machine. It is composed by the following main parts: (1). Tank The tank 1 is welded with steel plate, using the impeller to stir, simultaneously inflating the air into pulp. In order to adjust the thickness of slurry surface in tank and foam layer scraped, the intermediate tank 15 is made up of two slot panels, in which is the pulp surface regulator 5 installed, orifice 17 is installed on the tank cover 14, which is used to prevent the chaotic movement of pulp affects on the bubble zone, the gangue is entrained mechanically to the concentrate. Basin liner 6 is equipped in the tank to prevent the tank bottom worn, basin liner can be replaced. Discharging port 8 is placed outside the tank bottom, which is used to storage water when cleaning. The pulp flows into the intermediate tank 15 and the end tank 3 from the overflow port on the panel, the catheters of the intermediate tank bottom and the cover 14 on the groove wall bottom are put into the next tank, which will flow continuously through all the tanks of flotation machine. The pulp is fed from the feed chute 3, is discharged from the discharging port 8 of the tailing 1, the feed port 16 is equipped in front and at the back of tank bottom, which is easy to change the technological process. (2)Impeller system Impeller system is installed in the center of the flotation tank, the vertical arrangement coiled impeller 9 which leaves are up is fixed at the bottom of the impeller shaft 10 and around the vertical shaft tube 12. The tube top is located over the pulp stone and foam layer, the tube bottom is bearing the cover 14. When the impeller rotates, the quantities of air can be absorbed along the vertical tube 12. The protective plate 4 is fixed under the cover 14, the gap between the protective plate and impeller is related to the aeration rate, its maximum gap is less than 3mm, if the gap is too large, it is necessary to replace the protective plate or be adjusted appropriately. The hole of vertical tube 12 is used to cycle pulp, and make the pulp and air mix well. The upper of the impeller shaft rotates in the rolling shaft 11 installed in the bearing shell, the bearing shell is installed on the beam 7. The pulley fixed at the top of the shaft makes the motor 18 rotating through the triangle belt, of which the tension can be adjusted by the nut 19. (3). Shaving foam device Foam is scraped using the rotary scraper along the flotation machine, scraper 20 is installed out of the discharging port. The pulley is installed at the end of the scraper shaft, which rotates through the driving of the worm reducer 21 and V-belt. Technical parameters (1)Tank size: L¡ÁW¡ÁH 315¡Á315mm¡Á527mm (2)The effective volume: 39 liters (3)The flow of the pulp is calculated according to the production capacity (4)Aeration rate: 35-45 liters / min (5)Impeller diameter:200mm (6)Impeller speed: 809m/s (7)Impeller circumferential speed:8.14m/s (8)Scraper rpm: big wheel/small wheel 21r/min /13r/min (9)Motor: Model y900l-4 voltage :220/380V. Power:1.5KW rpm: 1400 r / min (10)Assembly method: Left-style (11)The outline size of machine: H: 930mm, W: 762mm, L (including 2 slots)1081mm (12)Total weight:(including 2 slot motors).
LMZ designs the best proper Mobile Substation by analyzing customer requirements, site and transportation conditions. SETAS Mobile Substations are used for military camps, industrial facilities, distribution networks, emergency power demands and additional power requests. Mobile Substation General Specifications: HV switching equipments can be gas ORA IR insulated Trailer / Platform / Wagon / Vessel type applications Up to IP 56 Protection Class Entire substation can be deliver being ready to use in a SCADA system Shorter manufacturing time compare to fixed type. Ideal solution for emergency power demand, temporary services and new services Production is made according to IEC 62271-202, 200, standards, different standards can also be applied on demand.
SETAS SCK series Sheet Steel Kiosks are manufacture comply with IEC 62271-202 standards. Demountable structure provides to assemble easily in a short period. General Specifications: Main structure 3 mm, doors and roof 2 mm galvanized metal.Easily demountable and transfer to a diffrent place when requires Easy transportation due to the light weight. Heat Proof against the warm and cold environmental conditions, Easily demountable and transfer to adiffrent place when requires. Flexible dimensions can be manufacture for diffrent application. NPU material used at the floor against the corrosion Platform and trailer type manufactureing possilities. SCK series Sheet Steel Kiosk types; SCK-D for Distribution Substation applications SCK-T for Transfomer Center applications Sheet Steel Kiosks are generally manufactured upon customer requirements, but SCK-T series kiosks has the following standard dimensions. SCK-T Standard Dimensions; Up to 400 kVA (WxDxH): 3500x1650x2000 mm Up to 1000 kVA (WxDxH) : 3800x2150x2400 mm Up to 1600 kVA (WxDxH) : 4250x2350x2600 mm.
Metal Clad Switchgears SETAS Metal Clad Switchgears are switching and control cubicles manufactured between 1 kV 40.5 kV comply with IEC 62271-200 standards. SMC series Metal Clad Switchgears are defined with following features according to IEC 62271-200 standards. 3mm sheet steels LSC 2B class Loss of Service Continuity Pm Partition Class AFLR Internal Arc Classification 4 earthed accessible compartments Maximum personnel safety with 31.5 kA/ 1 s internal arc test. Safety electrical and mechanical Interlocking systems. Withdrawable type Vacuum / SF6 Circuit Breaker for fast and easy servicing General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lightening Impulse withstand Voltage : 40185 kV Rated Frequency : 50/60 Hz Rated Current ( natural ventilation ) : 6303150 A Short Circuit withstand Current : 1631.5 kA ( 3 s ) Internal Arc withstand Current : 1631.5 kA ( 1 s ).
SME series Metal Enclosed Switchgears are defined with followwing features 2 mm sheet steel LSC 2A Loss of Service Continuity Pl Partition Class AFL Internal Arc Classification 3 earted accessible compartmments Maximum personel safety with up to 25 kA / 1s internal arc test Safety electrical and mechanical Interlocking systems SF6 gas insulated Circuit Breaker allows fast and easy servicing Grounding systems with ensured continuity. General Production Range and Specifications Rated Voltage : 3.640.5 kV Power Frequency withstand Voltage : 1085 kV Lighting Impulse withstand Voltage : 40185 kV Rated Frequency : 50 / 60 Hz Rated Current : 6301250 A Short time withstand current : 16/20/25 kA ( 1 sec ) Internal Arc withstand Current: 16/20/25 kA ( 1 sec ).
39- liters laboratory flotation machine is applied in ore dressing by the method of laboratory floating. It is concatenation floatation machine with several sets of machines. And the number of chutes is even from 1 to 10. It is left-type or right-type according to user¡¯s demand. Structure and features Laboratory flotation machine with 39 liters is impeller mechanical flotation machine. It is composed by the following main parts: (1). Tank The tank 1 is welded with steel plate, using the impeller to stir, simultaneously inflating the air into pulp. In order to adjust the thickness of slurry surface in tank and foam layer scraped, the intermediate tank 15 is made up of two slot panels, in which is the pulp surface regulator 5 installed, orifice 17 is installed on the tank cover 14, which is used to prevent the chaotic movement of pulp affects on the bubble zone, the gangue is entrained mechanically to the concentrate. Basin liner 6 is equipped in the tank to prevent the tank bottom worn, basin liner can be replaced. Discharging port 8 is placed outside the tank bottom, which is used to storage water when cleaning. The pulp flows into the intermediate tank 15 and the end tank 3 from the overflow port on the panel, the catheters of the intermediate tank bottom and the cover 14 on the groove wall bottom are put into the next tank, which will flow continuously through all the tanks of flotation machine. The pulp is fed from the feed chute 3, is discharged from the discharging port 8 of the tailing 1, the feed port 16 is equipped in front and at the back of tank bottom, which is easy to change the technological process. (2)Impeller system Impeller system is installed in the center of the flotation tank, the vertical arrangement coiled impeller 9 which leaves are up is fixed at the bottom of the impeller shaft 10 and around the vertical shaft tube 12. The tube top is located over the pulp stone and foam layer, the tube bottom is bearing the cover 14. When the impeller rotates, the quantities of air can be absorbed along the vertical tube 12. The protective plate 4 is fixed under the cover 14, the gap between the protective plate and impeller is related to the aeration rate, its maximum gap is less than 3mm, if the gap is too large, it is necessary to replace the protective plate or be adjusted appropriately. The hole of vertical tube 12 is used to cycle pulp, and make the pulp and air mix well. The upper of the impeller shaft rotates in the rolling shaft 11 installed in the bearing shell, the bearing shell is installed on the beam 7. The pulley fixed at the top of the shaft makes the motor 18 rotating through the triangle belt, of which the tension can be adjusted by the nut 19. (3). Shaving foam device Foam is scraped using the rotary scraper along the flotation machine, scraper 20 is installed out of the discharging port. The pulley is installed at the end of the scraper shaft, which rotates through the driving of the worm reducer 21 and V-belt. Technical parameters (1)Tank size: L¡ÁW¡ÁH 315¡Á315mm¡Á527mm (2)The effective volume: 39 liters (3)The flow of the pulp is calculated according to the production capacity (4)Aeration rate: 35-45 liters / min (5)Impeller diameter:200mm (6)Impeller speed: 809m/s (7)Impeller circumferential speed:8.14m/s (8)Scraper rpm: big wheel/small wheel 21r/min /13r/min (9)Motor: Model y900l-4 voltage :220/380V Power:1.5KW rpm: 1400 r / min (10)Assembly method: Left-style (11)The outline size of machine: H: 930mm, W: 762mm, L (including 2 slots)1081mm (12)Total weight:(including 2 slot motors).
Motorcycle Engine, Displacement: 110cc, 125cc, 150cc, 200cc, 250cc Air cooled and water cooled available 4 stroke OEM quality Trade Terms: FOB Chongqing Payment Terms: T/T, L/C Delivery Time: Within 30 days by order quantity. Box & Bag or as your specific request.
Original Package and in good conditions. All products are guaranteed to be working and in good conditions. 2.Warranty: We provide 90 days warranty for this item. 3.Payment Terms:Wire transfer in advance. 4.Lead Time: Our bank account the money is received, the one working days shipping 5.Shipments: Ship out all goods to worldwide by our DHL account. 6.RMA: Please take your receipt make refund within 7 days if our engineer make sure your goods is defective, but personal behavior is exception. This is only one condition, kindly please tolerant and follow up. Thank you very much for your business!!. Original Package and in good conditions. Weight: 1KG Carton size: 15cm * 20cm * 15cm.
Mitsubishi PCB circuit board (MC111,MC301,MC303).
