14t mining trolley traction locomotive The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t) : 14 ton Track gauge (mm) : 600.762.900 Traction (KN) : 26.68 Max. Traction (KN) : 34.3 Speed(km/h) : 12.87 Power (KW) : 52*2 Dimensions Length(mm) : 4800 Width(mm) : 1060,1222or 1360 Height(mm) : 1700 Wheelbase (mm) : 1700 Wheel diameter (mm) : 760 Min Curve radius (m) : 12 Controller : Resistencia or IGBT Braking method : Mechanical
Trolley electric locomotive is a kind of rail transportation traction equipment, powered by transformers and overhead lines. Mainly used in mines where there is no risk of explosion. Because of its special power supply mode, the trolley electric locomotive has no limit on the cruising range. Therefore, it is suitable for long-term and long-distance use. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1, 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6, 7.5 Power (KW) : 12KWx1, 6.5KWX2 Dimensions Length(mm) : 2700, 2750 Width(mm) : 940,1102or 1240 Height(mm) : 1550, 1500 Wheelbase (mm) : 816, 850 Wheel diameter (mm) : 650, 850 Min Curve radius (m) : 5.7, 6 Controller : Resistencia or IGBT Braking method : Mechanical Advantages of our product 1.Using high-quality steel plates, special rust removal process make sure it more anti-corrosion and suitable for harsh mining environment. 2. Producing motors ourselves, using high lever insulation material and pure copper, ensure the powerful traction force, and suitable for harsh mining environment. 3.Gear anastomosis surface to reach more than 80%, which is far more exceeding the standard. 4.Professionally designed and adjusted frame ensure safe driving and avoids falling off rails. 5.A variety of braking methods can be choose, air brake, hydraulic brake, electric brake, mechanical brake to ensure the safety drive. 6. 40 years richful experience with the ability to design and make customized product according to your requirements. 7. Proving factory online-visiting Factory Test Mining Locomotive test 1.Before Running the locomotive,carry out gear debugging, lighting, gear, and brake adjustment etc.To ensure the normal operation of the locomotive. 2.Carry out a tensile test before leaving the factory to ensure the load performance of the locomotive meets the standard. Our design standards generally exceed the national standard by 10%-20%. 3.Carry out different type running test before leaving the factory to ensure the performance and normal operation of the whole locomotive. It can adapt to various harsh conditions under simulated working conditions. Motor test The motor has to go through many inspection procedures before leaving the factory, and each motor has to be carried out with load running experiments. Explosion-proof motors are carried out with water pressure test. All the test of motor is to ensure that can adapt to harsh working conditions.
Total weight (t) : 8 ton Track gauge (mm) : 500, 600, 762, 900 Traction (KN) : 11.18 or 12.83 Max. Traction (KN) : 19.62 Speed(km/h) : 6.2~7.8 Battery Voltage (V) : 110~140V Battery Capacity (Ah) : 440 Power (KW) : 11 or 15 KWx2 Dimensions Length(mm) : 4420 Width(mm) : 920,1082 or 1220 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistance or IGBT Braking method : Mechanical or air brake
The locomotive is a new product specially designed for large mines. It applies IGBT speed control way, realizes smooth starting and low failure rate, and is a new- generation energy efficient product. Main features include: small outer diamensions, short wheel base, small turn radius, high speed and strong traction force. V-shape rubber damps are used on this locomotives in order to bear viration and impact from lengthways, vertical and transverse directons. The sails are elastic rubber plates which can ensure a reduced shock in operation. Adhesive / total weight (t): 14 ton Track gauge (mm): 600.762.900 Traction (KN): 26.68 Max. Traction (KN): 34.3 Speed(km/h): 12.87 Power (KW): 52*2 Dimensions Length(mm): 4800 Width(mm): 1060,1222or 1360 Height(mm): 1700 Wheelbase (mm): 1700 Wheel diameter (mm): 760 Min Curve radius (m): 12 Controller: Resistencia or IGBT Braking method: Mechanical
Adhesive / total weight (t) 7 ton Track gauge (mm) 600,762 or 900 Traction (KN) 13.05kN/ 15.09kN Max. Traction (KN) 17.2kN Speed(km/h) 11km/h Voltage 250V or 550V Power (KW) 21kw *2 or 24 kw*2 Dimensions Length(mm) 4550mm Width(mm) 1050,1212 or 1350mm Height(mm) 1550mm Wheelbase (mm) 1600 mm Min Curve radius (m) 7 m Wheel diameter (mm) 680mm Controller Resistance or IGBT or AC controller Braking method Mechanical or air Brake
This Doppler k band radar measures the absolute ground speed in diesl electric locomotives. Application: for all emd gt46 mac and pac locomotives deales with emd part no 40081692 across the globe.
CJY1.5 ton mining narrow gauge trolley locomotive Adhesive / total weight (t) 1.5 ton Track gauge (mm) 500.600,762 or 900 Traction (KN) 2.55kN/3.24kN Max. Traction (KN) 3.68kN Speed(km/h) 4.54km/h/ 6.6km/h Voltage 100 or 250V Power (KW) 3.5*1 Dimensions Length(mm) 2340mm/ 2370mm Width(mm) 914,1076 or 1214 Height(mm) 1550 Wheelbase (mm) 650 Wheel diameter (mm) 460 Min Curve radius (m) 5 m Controller Resistance or IGBT Braking method Mechanical Brake
CTY8ton coal mine flameproof battery electric locomotive Adhesive / total weight (t) 8 ton Track gauge (mm) 500.600.762.900 Traction (KN) 11.18 or 12.83 CTY8 ton battery locomotive for mining / tunnel mining machine electric locomotive for mining Max. Traction (KN) 19.62 Speed(km/h) 6.2~7.8 Battery Voltage (V) 110~140V Battery Capacity (Ah) 440 Power (KW) 11 or 15 KWx2 Dimensions Length(mm) 4420 Width(mm) 920,1082 or 1220 Height(mm) 1600 Wheelbase (mm) 1100 Wheel diameter (mm) 680 Min Curve radius (m) 7 Controller Resistencia o IGBT Braking method Mechanical or air brake
High quality CTY2.5ton anti-explosion battery locomotive factory Power (KW) 3.5*1 Dimensions Length(mm) 2360 Width(mm) 914,1076 or 1214 Height(mm) 1550 Wheelbase (mm) 650 Wheel diameter (mm) 460 Min Curve radius (m) 5 Controller Resistance or IGBT Braking method Mechanical Brake
2.5T Explosion Proof Battery Locomotive adopts module design, step-less speed regulation.The control part sets multiple protection to improve the safety of the locomotive. It is characterized by a smooth starting, stable operation, small size, short wheelbase, quick expansion brake, reliable brake, less maintenance, and electric brake make the locomotives are more safe and reliable. The simple structure is easy for maintenance. The Battery locomotives are applied to galery transportation in the small mine and call car in the medium-sized and small mine. Model No.CTY2.5/4, 6,7,9B Specifications Adhesive / Total weight (t)2.5 Track gauge (mm)472, 600,762, 900 Traction (KN)2.55 Max. Traction (KN)6.13 Speed(Km/h)4.53 Max.Speed(Km/h)10 Battery Voltage (V)48 Battery Capacity (Ah)320 Power (KW)3.5*1 DimensionsLength(mm)2330 Width(mm)914,1076 or 1214 Height(mm)1550 Wheelbase (mm)650 Wheel diameter (mm)460 Min Curve radius (m)5 ControllerIGBT Transmission MethodDual Level Gearing Braking methodElectric+Mechanical Brake
The 12T Explosion Proof Type IGBT Control Battery Locomotive has large traction, high speed, large loading capacity.Two sides of cabs has a wide sphere of vision. The 12T battery locomotive adopts IGBT contoller or frequency contoller. The shutoff ability of the main circuit of IGBT chopper is strong, the trigger circuit selects the integrated voltage source, integrated timer, composition elements, etc., which leads to less circuit components, easy installation and testing, easy and reliable in operation. IGBT control locomotive has simple electric circuits, stable starting,smooth speed regulation and easy maintenance,saving 30% of energy. Model No.CTYL12 /67, 9 B - 192 Adhesive / Total Weight (t)12 Track Gauge (mm)600,762, 900 Traction (KN)16.48 Max. Traction (KN)29.43 Speed(Km/h)8.7 Battery Voltage (V)192 Battery Capacity (Ah)560 Power (KW)22kw�2 DimensionsLength(mm)5100 Width(mm)1050/1212/1350 Height(mm)1600 Wheelbase (mm)1180 Wheel diameter (mm)680 Gearbox Height Over Rail(mm)�85 Coupler Height(mm)320mm/430mm Min Curve Radius (m)9 ControllerIGBT Control Drive Ratio17.5 Transmission MethodDual Level Gearing Braking methodElectric+Mechanical Brake
The 8T Explosion Proof Type IGBT Control Battery Locomotive has tight struture, high reliability and stable operation. It can be designed into two cabs accordingly to customer requirements. The 8T battery locomotive adopts IGBT contoller or frequency contoller. IGBT control locomotive has simple electric circuits, stable starting, smooth speed regulation, large loading ability, saving 30% of energy. Model No.CTYL8/6, 7, 9B-110132 Adhesive / Total Weight (t)8 Track Gauge (mm)600,762, 900 Traction (KN)11.18 Speed(Km/h)6.2/7.5 Battery Voltage (V)110/132 Battery Capacity (Ah)440 Power (KW)11kw�2 DimensionsLength(mm)3890/4460/4300/4830 Width(mm)1052/1217/1355 Height(mm)1600 Wheelbase (mm)1100 Wheel diameter (mm)680 Gearbox Height Over Rail(mm)�85 Coupler Height(mm)320/430 Min Curve Radius (m)7 ControllerIGBT Control Drive Ratio17.5 Transmission MethodDual Level Gearing Braking methodElectric+Mechanical Brake
CJY3/6B IGBT trolley locomotive adopts module design with step-less speed regulation. Its large starting torque makes the operation of the locomotive smooth. And its structure is compact. Features: 1. 3T trolley lcoomotive adots IGBT step-less speed regulation, achieving large starting torque and smooth operation. 2. 3T trolley locomotive adopts imported power component which can save 35% of energy. It has a betterenergy saving effect than that of Thyristor speed control locomotive. 3. 3T trolley locomotive adopts electric braking and mechanical braking to ensure the safety of the locomotive. Model No.CJY3/6(B) Adhesive / Total Weight (t)3T Track Gauge (mm)600762 or 900mm Traction (KN)5.74kN Max. Traction (KN)7.36kN Speed(Km/h)7.5km/h DC Voltage (V)250V Power (KW)*Unit6.5kw2 DimensionsLength(mm)3035mm Width(mm)920/1082/1220mm Height(mm)1550mm Wheelbase (mm)850 mm Wheel Diameter (mm)Φ520 mm Pantograph Height1800~2000mm Min Curve Radius (m)6m Transmission MethodDual Level Gearing ControllerIGBT Braking MethodElectric+Mechanical Brake
CJY10/6B IGBT trolley locomotive adopts module design, step-less speed regulation, tight structure.The trolley locomotive is mainly used for the transport of minerals, instrucments and personnel of underground main roadway. Features: large traction, high speed and stable operation. Adhesive / Total Weight (t)10T Track Gauge (mm)600,762,900mm Traction (KN)18.93 Max. Traction (KN)24.5 Speed(Km/h)10.5 km/h Max. Speed(Km/h)20km/h DC Voltage (V)250/550V Current(A)122A Power (KW)*Unit30kw2 DimensionsLength(mm)4470mm Width(mm)1055�1217,1355mm Height(mm)1550mm Wheelbase (mm)1220mm Wheel Diameter (mm)Φ680 mm Pantograph Height2000-2400mm Min Curve Radius (m)10M ControllerIGBT Contol Braking MethodElectric+Mechical Braking
Model no.Cay2.5/5, 6, 7, 9g Specifications Adhesive / total weight (t)2.5 Track gauge (mm)500, 600, 762 or 900 Traction (kn)2.55 Max. Traction (kn)6.13 Speed(km/h)4.54 Max. Speed(km/h)10 Battery voltage (v)48 Battery capacity (ah)330 Power (kw)3.5*1 Dimensionslength(mm)2330 Width(mm)914, 1076 or 1214 Height(mm)1550 Coupler height(mm)320 Wheelbase (mm)650 Wheel diameter (mm)460 Min curve radius (m)5 Controllerresistance Braking methodmechanical brake
Product Description Model No. CTY5/6,7,9G (B) Adhesive / total weight (t) 5 Track gauge (mm) 600,762 or 900 Traction (KN) 7.06 Max. Traction (KN) 12.26 Speed(km/h) 7 Battery Voltage (V) 90 Battery Capacity (Ah) 385 Power (KW) 7.5kW*2 Dimensions Length(mm) 2860 Width(mm) 920,1082 or 1220 Height(mm) 1550 Wheelbase (mm) 850 Wheel diameter (mm) Φ520 Min Curve radius (m) 6 Controller Resistance or IGBT Braking method Mechanical Brake Our Service Pre-sales Service: The wide product range enables us to provide our customers with individual machines or complete processing plants.Based on our customers'request and budget, our experts make efficient and reliable solutions, and we produce strictly follow customers' order. What's more, every customer has the chance to visit the working machine in the site before placing the order. After-sales Service: Experienced technicians guidance is available on the phone, and on the internet. One or more engineers will be dispatched to the quarry site to help install the customers'plants.Necessary training about machine daily maintenance to local workers is provided also. Methods of Payment: T/T (Telegraphic Transfer) or Western Union or L/C at sight Handling time for an order: Within 10 days supplied from stock Shipping method: Sample order: we suggest Courier express like DHL/UPS/TNT/FedEx or by air Bulk order: we suggest by air or by sea. Quality Control: We have our own experienced QC. There will be strict inspection and testing for every order before shipping out. 5. After Services: a. Our sales team will response for your question within 24 hours (Holidays Excluded) b. Technical Support will be available in any time c. Free replacement will provide once the failure confirmed caused by our product quality About Us: Our factory has been specialized in manufacturing locomotives and spare parts since 1980. We have advanced technology and equipment. Our technician has more than 25 year's professional working experience. Locomotives are exported throughout the world. Main market: Norway, Turkey, USA,Canada, Australia, Brazil, Uruguay, Iran, Philippines, Thailand, India, etc.
3 ton trolley electric locomotive for mining tunnel What to Inspect Before Operating Underground Mining Locomotives? Before operating underground mining locomotives, it is crucial to conduct thorough inspections to ensure safety and efficiency. Start by examining key equipment, including electrical and control systems, to verify integrity and confirm that all components are in proper working order. This includes checking fuse specifications and ensuring tight fastenings to prevent potential malfunctions. Inspect the tracks ahead for any obstacles that could impede locomotive movement, as clear pathways are essential for safe operations. Additionally, assess the condition of brake pads to ensure effective braking when necessary, and inspect the sandboxes to ensure that the sand meets required specifications for optimal traction. These series of inspections are vital for minimizing operational risks and ensuring the smooth and safe operation of underground mining locomotives. By diligently conducting these checks, operators can mitigate potential hazards and maintain efficient mining operations. Adhesive weight (t) : 3 ton Track gauge (mm) : 600.762.900 Traction (KN) : 6.1 or 5.74 Max. Traction (KN) : 7.36 Speed(km/h) : 10.6 7.5 Power (KW) : 12KWx1 6.5KWX2 Dimensions Length(mm) : 2700, 2750 Width(mm) : 940,1102 or 1240 Height(mm) : 1550, 1500 Wheelbase (mm) : 816, 850 Wheel diameter (mm) : 650, 850 Min Curve radius (m) : 5.7 6 Controller : Resistencia or IGBT Braking method : Mechanical
8t lithium battery locomotive for mining tunnel Total weight (t) : 8 ton Track gauge (mm) : 500.600.762.900 Traction (KN) : 11.18 or 12.83 Max. Traction (KN) : 19.62 Speed(km/h) : 6.2~7.8 Battery Voltage (V) : 110~140V Battery Capacity (Ah) : 440 Power (KW) : 11 or 15 KWx2 Dimensions Length(mm) : 4420 Width(mm) : 920,1082 or 1220 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7 Controller : Resistencia or IGBT Braking method : Mechanical or air brake What Safety Measures are Implemented in a 8-Ton Battery Electric Locomotive? 1. Emergency Stop Systems: The 8-ton battery electric locomotive is equipped with reliable emergency stop systems to ensure quick and efficient response during emergencies or hazardous situations. These systems are designed to promptly halt the locomotive's operation when necessary. 2. Collision Avoidance Systems: To prevent accidents, especially in congested mining areas, the locomotive incorporates advanced collision avoidance systems. These systems utilize technologies and strategies to detect and avoid potential collisions, ensuring the safety of workers and machinery. 3. Overload and Overheating Protection: To mitigate the risks of overload and overheating, the locomotive incorporates protective mechanisms. Sensors and control mechanisms are employed to detect and prevent overloading and overheating of components, ensuring safe and efficient operation. 4. Operator Visibility: Clear visibility for operators is essential for safe locomotive operation. Measures are taken to enhance operator visibility, including optimized cabin design, and adequate lighting. These measures minimize the risk of accidents or collisions with obstacles. 5. Emergency Lighting and Communication Systems: In case of emergencies or power outages, the locomotive is equipped with emergency lighting and communication systems. These systems provide clear visibility and effective communication, enabling crew members to respond appropriately during critical situations. 6. Electrical Safety Measures: Given the presence of high-voltage batteries and power systems, the locomotive implements various electrical safety measures. These measures include insulation, grounding, and protection against electric shock, ensuring the safety of both the crew and the equipment. 7. Training and Education: Comprehensive training and education are provided to operators and maintenance personnel to ensure safe operation, emergency procedures, and proper maintenance practices specific to the 8-ton battery electric locomotive. This training equips individuals with the necessary knowledge and skills to handle the locomotive safely and effectively.
5-ton lithium battery locomotive for mining Battery electric locomotive is a kind of track traction equipment powered by batteries, which is generally used in mines. There are two types of battery electric locomotives, explosion-proof type and ordinary type. The explosion-proof type is mainly used in coal mines. There are also many options in terms of speed regulation and braking methods. Speed control methods include resistance speed control, chopping speed control and frequency conversion speed control. Braking methods include pure mechanical braking, hydraulic braking and compressed air braking. In addition, electric braking can also be selected as an auxiliary braking method. Adhesive / total weight (t) : 5 ton Track gauge (mm) : 600.762.900 Traction (KN) : 7.06 Max. Traction (KN) : 12.26 Speed(km/h) : 7 Voltage (V) : 250V Power (KW) : 7.5 KWx2 Dimensions Length(mm) : 3170 Width(mm) : 920,1082or 1220 Height(mm) : 1550 Wheelbase (mm) : 850 Wheel diameter (mm) : 520 Min Curve radius (m) : 6 Controller : Resistencia or IGB or VF controller Braking method : Mechanical/Hydraulic brake
10 Ton Xiangtan trolley locomotive for underground tunnel The model has two kinds of working rated voltage:250v and 550V. It applies primary driving way, speed control of IGBT chopping wave type or resistor type or VF type. Main fetures include:short wheel base, high stiffness of vehicle body, and good shockproof performance. The braking type is mechanical or electric braking. Both mechanical braking and electric brking have safe and reliable effect. Adhesive / total weight (t) : 10 ton Track gauge (mm) : 600.762.900 Traction (KN) : 13.05 18.93 Max. Traction (KN) : 24.5 Speed(km/h) : 11, 10.5 Power (KW) : 21*2 30*2 24*2 Dimensions Length(mm) : 4550, 4650 Width(mm) : 1050,1212or 1350 Height(mm) : 1600 Wheelbase (mm) : 1100 Wheel diameter (mm) : 680 Min Curve radius (m) : 7,10 Controller : Resistencia or IGBT Braking method : Mechanical