1. Fried corn curls processing line Fried corn curls processing line is mainly made up with raw materials treatment system, extrusion system, frying system, flavoring system and controlling system. It has high stability and automatic performance. Its core technology is extrusion and frying. It can be different configuration basing on different extruders, fryers and flavoring machines. 2. Fried corn curls processing line description: 2.1 Flow chart: raw materials---extrusion---frying---flavoring---cooling---packing 2.2 Fried corn curls processing line features: 2.2.1 High work efficiency, automation degree, materials usage, application range. 2.2.2 Low land occupation, power consumption, labor cost, waste rate. 2.2.3 Various configurations and capacity choices. 2.2.4 Production factors can be quantified and controlled. 2.2.5 World-class food grade fittings. 2.2.6 All machines and fittings can be custom-made. ODM or OEM is available. 2.2.7 Professional pre-sale, sale and after-sale service. 3. Fried corn curls introduction Fried corn curl is one of deep fried snacks, which is very popular in the world. The International representative brands are Cheetos, Kurkures and Nik Naks. Corn curl is made from corn grits by special extruder. Its shape is irregular stick, and its mouthfeel is crisp. After being flavored by different seasoners, corn curl is received different population and markets.
Hello there, We are granite processors and exporters based in India, we deal with various stones in almost all dimensions, please go thought the following description of the product and the services we provide to our customers: Each and every stone is inspected prior to stuffing. Tiles Dimension: All Dimensions (ex : 30X30, 60X30, 60X60, 80X30, 80X60, 120X30, 120X60.....) cm's Slabs Dimensions: 120 upX 60 up, 180 upX 60 up, 240 upX 80 up, 300 X 200 cm's (Gangsaw slabs). Thickness: 10mm, 15mm, 20 mm, 30mm Edge Profile: Eased, Og, Beveled, etc. Is Customized: Yes, "you name it we deliver". Surface Treatment: Polished, Flamed, Honed. Min Order: 100 square meters. Pricing: FOB,CNF,CIF Payment Term: T/T, L/C Package: Wooden Crate With Fumigate Stamp Port: KPCT, Mumbai, India. Shipping : We offer door delivery for individual customers, we can ship right to your door steps. Quality Guaranteed : 100% international standard inspection prior to shipping. To ensure the measurement, edge making, and also the seams are 100% achieved. Standard wooden packing to avoid "CHIPPING" (breaking) of edges of tiles at the time of sea voyage. Please contact us for any further information. We take orders from individual customers to massive construction firms, we have huge inventories and best in the market supply chain management systems, these help us in time keeping and make sure our customer gets the products in time. Look forward to hear from you. Best Regards Raghuveer Paturi www.agrima.co +91 9640495513 (Whats app & Viber)
Basic Info Model NO.: 201 Surface Treatment: 2b/Ba Finish: 2b/Ba Thickness: 0.23-2.0mm Diameter: 100-600mm Delivery Time: 15-30 Days Package: Wooden Case Material: Low Copper/Half Copper/High Copper Application: Stainless Steel Pot, Stainless Steel Tray, etc. Trademark: KSICO Transport Package: Standard Wooden Case Packaging Specification: ACCORDING TO YOUR REQUIREMENT Origin: Guangdong, China (Mainland) Product Description COLD ROLLED 2B/BA STAINLESS STEEL CIRCLE PRODUCT DESCRIPTION: PRODUCT DETAILS: TYPE: COLD ROLLED STAINLESS STEEL CIRCLE SURFACE FINISH: 2B OR BA GRADE: 201/410/304/430/202 THICKNESS: 0.23-3.0MM DIAMETER: 100-600MM SURFACE PROTECTION: PAPER STANDARD: AISI, ASTM, MTC OTHERS: MINIMUM ORDER QUANTITY: 5 TONS PACKING: STANDARD SEA EXPORT WOODEN PACKING TRADE TERMS: CIF, CNF, FOB PAYMENT TERMS: T/T or L/C DELIVERY DATE: 15-30 DAYS AFTER WE GOT YOUR 30% DEPOSIT. SOMETIME ACCORDING TO THE NUMBER OF ORDER. EXPORT MARKETS: MAINLY SOUTHEAST ASIA, EASTERN ASIA, AFRICA, MID EAST APPLICATION: PLATE, KITCHENWARE, TABLEWARE, HARDWARE, DAILY PRODUCTS, DECORATIVE PIPE AND TUBE, HINGE, ETC. CERTIFICATION: ISO, SGS ORIGIN: GUANGDONG, CHINA (MAINLAND) PRODUCTION CAPACITY: 2000 TONS/MONTH
lick Vinyl is a new type of vinyl floor which has the advantage of easy to install, its unique structure ensures DIY lovers to decorate their homes themselves. During the installation, we do not use glues, to helps reduce the pollutions to the lowest. Also click is water proof, fire resistant, easy installation, low in cost, easy to keep clean etc Item Easy Installation Click Vinyl Flooring Size(available) 6''x36'', 7''x48'', 9''x48'',184x1220mm Thickness(available) 3.2mm--8.5mm Wear Layer(available) 0.3mm,0.5mm,0.7mm Surface Treatment UV Coating Surface texture Wood Grain/deep or light Embossed/Handcraped/Register Emboss Installation Click Lock Product Features 1, Fantastic vinyl floors that won't wear or fade 2, Safe,slip-resistant and 100% waterproof. 3, Tough,durable, scuff adn scratch resistant 4, Easy to clean 5, Resistant to bacteria,dust mites and allergens 6, Suitable with under-floor heating 7, Vinuyl floors feel warmer and more comfortable, when walking with bare 8, Easy and quick to install 9, Cost Effective,waterproof flooring 10, A small dent will bounce back 11, Vinyl flooring is more flexible than tiles 12, It can easily be replaced if damaged 13, Having an endless number of colors and patterns to choose from
Dry contact Ex Double infrared flame detector relay output EXdIICT6 Dry contact Explosion proof Double infrared flame detector Fire alarm relay output Fault relay output IR2 EXdIICT6 Product function and composition A705/IR2 can be applied to the need to monitor the implementation of the fire place, quickly found that the fire may cause the burning flame, issued in a timely manner Fire alarm. A705/IR2 is converted to electrical si gnal by two infrared pyroelectric sensors which work in different bands. Signal input industrial computing chip for comparison, operation and processing, with the detecter&anysafe II Ir dedicated intelligent control software, you can Send out a fire alarm in time. A705/IR2 uses the aluminum die-casting flameproof shell, has good protective properties and explosion-proof, corrosion resistance, aging resistance, can work for a long time In the indoor, outdoor and all kinds of special industrial places. Sensor sharp probe AE-S708/4 and AE-S708/5 infrared pyroelectric sensor Optical window ï¼?white gems (Al2O3) housing L material: aluminum alloy L molding process: Die Casting L coating process: surface electrostatic powder coating, internal metal passivation treatment. The weight is less than 1kg Explosion proof and protection l anti explosion: EXd II CT6 L protection: IP66
What glass is the backboard made from? Hexin glass tempered glass basketball backboard is a heat toughened safety glass. It has under gone a special heat treatment to increase its strength and resistance to impact. In fact, tempered glass is approximately five times more resistant than normal glass. For example a piece of 8mm toughened glass will be able to withstand a steel ball weighing 500gr dropped from a height of 2 meters. High impact resistance makes hexin tempered glass is the perfect option for basketball backboard. What is the glass features? 1.High strength and good safety. 2. Good thermal-resistance being available to certain change of temperature. 3. Good performance of anti-pollution being cleaned easily. 4.Good aging-resistance keeping transparent for long period. 5.Flexible production for truly custom glass. Specifications Glass type: clear tempered glass. Glass thickness: 8mm, 10mm, 12mm. Board size: 1800mm*1050mm. Design: board with white silkscreen print frame line and holes or cut out for installation. Remark: above mentioned details are standard. Customized design available. Processing Cutting Big glass is cut into small sizes in advance. Edge working Normally grinded edges and rounded safety corner are applied. Then cutting or drilling for installation part. Printing and tempering Silk screen printing the frame lines. Then glass goes through high temperature and sharp cool to be strengthened.Thus, the printing and glass combines together and never fade. Mean whle the glass is strengthened. Thickness: 5-15mm Dimension: any size Color: any color and shape Package: wood crate Cerification: sgcc ce csi sgs tuv Edge work: all polish edge Glass style: low iron glass, including bleached, starphire, diamante, extra clear, ultra clear and super clear.
Quick Details Place of Origin: Zhejiang, China (Mainland) Brand Name: TITA Model Number: T9303 Style: Modern Type: Vanity Combo Installation Type: Floor Mounted Carcase Material: Solid Wood Door Material: Solid Wood Door Panel Surface Treatment: Lacquer Include Basin: Yes Include Countertop: Yes Countertop Material: Marble Include Mirror: Yes Mirror Type: Mirrored Cabinet Include Faucet: No Color: White Accessories: Mirror+basin Hardware: DTC Invisible Soft-close Hinges MOQ: 10 Sets Basin: Grade Ceramic Material Mirror: 5mm Sliver Mirror Certificate: ISO9001:2000/CE Finish: Eco-friendly Lacquer Feature: White high gloss liquidation bathroom vanity Size: Customized Packaging & Delivery Packaging Details Inside: 6 sides foam board against the body Outside: bubble plastic bag with export standard carton Delivery Time Shipped in 30 days after payment Product name White high gloss liquidation bathroom vanity Place of origin Hangzhou, China Model No. T9303 Main cabinet 72"W x 22"D x 33.5"H Material Solid wood Hardware Polished finishing Color Optional Accesoories Faucet & pop-up drainer Certificates ISO9001:2000 / CE Silver mirror Yes Countertop Yes MOQ 10 sets Delievery Time 30 days after receiving 30% deposit Payment Terms L/C at sight, T/T Package 6 sides foam board and PE shrink film with standard carton outside Advantage 1. Practical, modern & stylish 2. Waterproof & moistureproof 3. Resistance of high pressure 4. Easy to clean 5. Soft-closing, noiseless & durable 6. Painting high gloss or matt 7. Variable size and color are available according to customersâ?? request ODM or OEM Welcome
Double wire fence are also named as double rod fence panel or double rod gratings (grid fencing). It has refining deign, plain panel and installs convenient.This professional fencing system usually choose square posts (50*50mm, 60*60mm) or rectangular posts (80*60*2. 5mm, 120*60*3mm) with high strength as stanchions. The panels and posts are jointed together with bolts or rivets, using the steel flat bar, or special steel clamps. The finished surface usually is galvanized and PVC coating, or alternatively. The thickness of PVC coating is 100-120 microns usually.The wire diameters are usually choosing 6MM*2+5MM*1.8MM*2+6MM*1. It obtains high strong powers to resist the construction. Material for double wire fence : Double wire fence uses high quality iron rod, low carbon steeland high quality steel as raw material Double Wire Fence Surface treatment: Hot dipped galvanized Electro galvanized PVC coated and spray painting Features for double wire fence: Double wire fence can resist ultraviolet radiation very strongly and has high degree of security. Due to the use of heavy welded mesh in conjunction with double horizontal wires, double wire fence is extremely rigid. The using coating technology guarantees double wire fence a long lifetime. Galvanizing on the surface of the fence ensures double wire fence a strong acid and alkali. Application for double wire fence: Double wire fences are used for fencing most industrial sites, sporting fields, multi games areas as well as protection of schools and nurseries. Thanks to the functional and esthetical properties, double wire fences are used more and more by domestic clients and authorities, as boundaries around playing fields, parks and living areas.
Carbon fiber chopped strand/ chopping carbon/ carbon fiber It is 1-80mm, cutting from carbon fiber yarn. It is base material of function material modified that is used for carbon fiber frp, friction material and other function material frp. Feature 1.Pan chop, high performance, suitable for aerospace industry; 2.No glue, good compatibility and dispersibility 3.Low ohms, good electrical conductivity and electromagnetic wave screening, high thermal conductivity 4.It could increase product strength and modulus 5.Low coefficient thermal expansion, high stability 6.High fatigue resistance, good abrasive resistance and lubricity Application area Space navigation and national defense: man-made satellite, airship, rocket, missile shell Reinforcement modified plastic: pa, pp, pc, pf, ptfe, pi, ep etc. Construction: concrete reinforce, frp bar, reinforce product, electrical conduction painting, anti-static terrace Electric heating: electrical conduction paper, electric hot plate, electric conduction mat, needle mat, electric conduction blanket Communications and transportation: racing bicycle, brake pad, live shaft, crossbeam, empennage, bonnet, leaf spring Shield material: protective shield, smog, curtain Industry: base installation, recovery gas oil, pressure vessel, composite stick, voyage construction member, Heat insulation or preservation: reinforce body, brick, ceramics Sport leisure: fishing rod, brassie, shaftment, bicycle stand, quant, sled New energy: wind power, flywheel, electrode of fuel battery Medical treatment: artificial ligament Parameter Carbon content: 96%, tensile strength: 3800mpa Tensile modulus: 228gpa, density: 1.75g/cm3 Ohms ratio: 1.0-1.6î©cm, diameter: 7m Section shape: round, bulk density: 0.4g/cm3 Chop length: 1mm-80mm
304 bright soft annealed stainless steel wire Stainless steel Bright Annealing, in metallurgy and materials science, is a heat treatment where in a material is altered, causing changes in its properties such as strength and hardness. It is a process that produceds conditions by heating to above the recrystallization temperature and maintaining a suitable termperature, and then cooling. Annealing is used to induce ductility, soften material, relieve internal stresses, refine the struture by making it homogeneous, and improve cold working properties. But usually, annealing is not the final purpose. Furthermore, it depends on different metal casting. Compared with Normalization, the later has advantages such as operate easily, short production period, few energy costs. So, if possible, we should consider to use Normalization firstly. Production Usage: Used for: 1. elogated wire, 2. weaving mesh, 3. hose; 4. the flame of kitchen ware, 5. wire ropes, 6. filtration equipment, 7. steel strand, spring, etc. Packing: 0.08-0.7mm stainless steel wires can use plastic spool(drum). Specifications of the plastic spools(drum) are as follows: DIN125, Net Weight of one full spool is around 2kg. Every 16 plastic spools(drums) one carton. DIN160,Net weight of one full spool is around 5kg. Every 4 plastic spools(drums) one carton. DIN200, Net Weight of one full spool is around 10kg. Every 4 plastic spools(drums) one carton. DIN250,Net weight of one full spool is around 15kg. Every 2 plastic spools(drums) one carton. 0.60-12mm stainless steel wire can use coil packing, inner diameter is 400mm, 500mm, 600mm, 650mm. Per package weight is 30-80kg. Wrap films inside and outside.
Stainless steel Bright Annealing, in metallurgy and materials science, is a heat treatment where in a material is altered, causing changes in its properties such as strength and hardness. It is a process that produceds conditions by heating to above the recrystallization temperature and maintaining a suitable termperature, and then cooling. Annealing is used to induce ductility, soften material, relieve internal stresses, refine the struture by making it homogeneous, and improve cold working properties. But usually, annealing is not the final purpose. Furthermore, it depends on different metal casting. Compared with Normalization, the later has advantages such as operate easily, short production period, few energy costs. So, if possible, we should consider to use Normalization firstly. Production Usage: Used for: 1. elogated wire, 2. weaving mesh, 3. hose; 4. the flame of kitchen ware, 5. wire ropes, 6. filtration equipment, 7. steel strand, spring, etc. Packing: 0.08-0.7mm stainless steel wires can use plastic spool(drum). Specifications of the plastic spools(drum) are as follows: DIN125, Net Weight of one full spool is around 2kg. Every 16 plastic spools(drums) one carton. DIN160,Net weight of one full spool is around 5kg. Every 4 plastic spools(drums) one carton. DIN200, Net Weight of one full spool is around 10kg. Every 4 plastic spools(drums) one carton. DIN250,Net weight of one full spool is around 15kg. Every 2 plastic spools(drums) one carton. 0.60-12mm stainless steel wire can use coil packing, inner diameter is 400mm, 500mm, 600mm, 650mm. Per package weight is 30-80kg. Wrap films inside and outside.
Steel pipe Anshan hong ming metallurgical machinery co., ltd and anshan ying yat trade co., ltd is an integrative group corporation. We are the agent of angang group new iron and steel co., ltd , benxi iron and steel group co., ltd, fushun iron and steel group co., ltd, and tonghua iron and steel group co., ltd. As to steel, we sell wire, reinforced bar, plate (sheet, medium plate, coil, uncoil sheet), tube (seamless pipe, straight welded tubing, galvanized pipe, high frequency welded tube, helical tube etc), i-beam, angle bar, channel steel and any other steel. At the same time, we can roll all kinds of special section. We have high-tech producing and processing level with heat treatment and quenching-and-tempering. We have five-meter vertical lathe, ten-meter lathe and twelve-meter boring machine etc. We professionally produce heavy mechanical processing equipment, all kinds of dust extractor, steel making equipment and steel rolling equipment (ª¦ 250-650 rolling mill) etc. We can process cast steel, cast copper, cast aluminum and any parts that cannot be processed by machine. We can produce heavy casting, rivet welding and heavy rivet welding products. We also can produce mechanical processing products, heavy cast steel and all kinds of processing products whose weight is 10 tons - 100 tons.
Steel products As to steel, we sell wire, reinforced bar, plate (sheet, medium plate, coil, uncoil sheet), tube (seamless pipe, straight welded tubing, galvanized pipe, high frequency welded tube, helical tube etc), i-beam, angle bar, channel steel and any other steel. At the same time, we can roll all kinds of special section. We have high-tech producing and processing level with heat treatment and quenching-and-tempering. We have five-meter vertical lathe, ten-meter lathe and twelve-meter boring machine etc. We professionally produce heavy mechanical processing equipment, all kinds of dust extractor, steel making equipment and steel rolling equipment (ª¦ 250-650 rolling mill) etc. We can process cast steel, cast copper, cast aluminum and any parts that cannot be processed by machine. We can produce heavy casting, rivet welding and heavy rivet welding products. We also can produce mechanical processing products, heavy cast steel and all kinds of processing products whose weight is 10 tons - 100 tons. Our products must satisfy you with best quality and enough quantity. Honoring contracts and keeping promise is our usual tenet. We sincerely want to cooperate with you on the basis of mutual benefit.
Product Description: 1) Selected raw materials, design and produce all components ourselves,25 years of experiences in heat treatment,. 2)Introduce advanced technology and import high-tech producing equipment from South Korea 3)Professional R&D team, meet diversified technical requirements of customers 4)Reasonable price and prompt shipment assured. Application: mining mining, second-time breaking metallurgy clearing slag, demolition of furnace and foundation road repairing, breaking, foundation work railway tunneling, demolition of bridge construction demolition of bulinding and reinforced concrete ship repairing clearing clam and rust from the hull others breaking frozen mud Suitable Excavator: MAXROKER hydraulics breakers suit many excavator brands like :DOOSAN DAEWOO, HYUNDAL, KOMATSU, HITACHI, CAT,KOBELCO, VOLVO, LIEBHEER, SUMTOMO, KATO, JONYANG, ATLAS ect. Our Services: 1.7*24 hours on-line consulting support by email and whatsapp: +8615165787156. 2.Customer-oriented sales,supply professional technical service. 3.Warranty:13 months for main body and valve,2 months for seal kits. 4.OEM/ODM available. The Standard Free Spare Parts: two pcs of Chisel, two pcs of oil tube, one pc of Nitrogen Cylinder, a set of repair tools with tool box, a Nitrogen pressure gauge,one set of seal kits and operation manual as well. FAQ Q 1:Are you a trading company or manufacturer ? Manufacturer with factory. Q 2:Do you accept OEM service ? Yes. Q3:How about the package ? Normally ,plastic bag inside and carton onside .we will do according to customers' requirements. Q4 : Did you have export experience about products? Yes,a professional sales team is promoting our hydraulic breakers to 50 countries more in the world. Q5 : What have about suitable excavators ? Applicable excavators are from 0.8ton to 55ton. Our breakers can be applied for all kinds of excavator.
Carbon Steel(CS) ASTM A105 RF FF RTJ Forged Pipe Flanges of type slip-on(SO) ASTM A105 Flanges, blind(BL) ASTM A105 Flanges, welded(welding) neck(WN) ASTM A105 Flanges, threaded(TH) ASTM A105 Flanges, lapped joint(LJ)ASTM A105 Flanges, socket welded(SW) ASTM A105 Flanges, Orifice ASTM A105 Flanges, long welding neck(LWN) ASTM A105 Flanges, Plate Slip-on ASTM A105 Flanges, Screwed Boss ASTM A105 Flanges, Slip on Boss ASTM A105 Flanges, Plate Flanges(GOST12820-80),Blind Flanges(GOST12836-67), Welding neck Flanges(GOST12821-80), Steel Butt-Welded Flanges GOST12821-80, SOP, SPH, TYPE1(Plate Flanges); TYPE2(Losses Plate Flanges); TYPE5(Blank Flanges); TYPE11(Weld-neck Flanges); TYPE12(Hubbed Slip-on Flanges For Welding); TYPE13(Hubbed Threaded Flanges) ASTM A105 Flanges We can provide Carbon Steel(CS) ASTM A105 RF FF RTJ Forged Steel Pipe Flanges of size ½ inch to 60 inch (DN15 to DN2000), JIS 10A -1500A, with nominal pressure rating(NPS) of ANSI Class 150, 300, 600, 1500, 2500, DIN PN6, PN10, PN16,P N25, PN40, PN64, PN100, PN160, 5K, 10K, 16K, 20K, 30K, PN 0.6Mpa, 1.0Mpa, 1.6Mpa, 2.5Mpa, 4.0Mpa, 6.4Mpa, PN6Mpa, PN10Mpa, PN16Mpa, PN25Mpa, PN40Mpa, PN64Mpa, PN100Mpa, PN160 Mpa & surface treatment of Anti-rust Oil, Transparent/Yellow/Black Anti-rust Paint, Zinc, Hot dipped Galvanized with export packing done with No Fumigate or Fumigate Plywood/Wood Pallet or Case and is used in applications of Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc. z
HEXIN (www.hexinglass.com)high-quality float glass surface is plated with a layer of silver film (be treated with special processing) via chemistry deposition method, and then the silver layer is plated with a layer of other special metal film (used to instead of the traditional silver mirror copper film) as the adhesive layer, and finally spray two layers of protective paint (have different properties) on the surface of the metal film as the protection treatment of the non-bronze mirror.The back paint (lead-free) is used in non-bronze mirror and can produce high-grade copper and lead-free mirror. Features : 1. After edge polishing, the edge anti-oxygenic property of the non-bronze mirror is 3 times than that of ordinary silver mirror. 2. Copper and lead-free mirror (lead content is less than 40ppm) 3. No copper or lead, green and environmental protection Specification : Silver mirror thickness: 2ï½?8mm Maximum size: 2440 x 3660mm Back paint: green,blue Advantages: 1 advanced copper free mirror producetion line 2 Coated on high quality selected mirror grade float glass 3 Actual and accurate reflection,reflective rate>91% long service life 4 more resistant to natural atmospheric corrosion in accordance with standards 5 the mirror surface is much more clear and bright than alu and sliver. 6 Easy to be cut, polish, beveled safety back, acid etched and installation 7 it last at least three times longer in tests simulation then natural aging of mirrors Test Report: (ITCC is IKEA's test office) z
high quality Adapter shell plastic injection mold tooling rapid prototyping Mold Type Plastic injection mold, overmolding, Interchangeable Mold, insert molding, compression mold, stamping, die casting mold, etc Design software UG, ProE, Auto CAD, Solidworks, etc. Main services Prototypes, Mold design, Mold making, Mold tesing, low volume/ high volume plastic production Certificate ISO 9001:2008 Steel material 718H,P20,NAK80,S316H,SKD61, etc. Plastic production Raw material PP,Pa6,PLA,AS,ABS,PE,PC,POM,PVC, PET,PS,TPE/TPR etc Mold base HASCO ,DME ,LKM,JLS standard Mold runner Cold runner, hot runner Mold hot runner DME, HASCO, YUDO,etc Mold cold runner point way, side way, follow way, direct gate way,etc. Mold strandard parts DME, HASCO, etc. mold life >300,000 shots Mold hot treatment quencher, nitridation, tempering,etc. Mold cooling system water cooling or Beryllium bronze cooling, etc. Mold surface EDM, texture, high gloss polishing Hardness of the steel 20~60 HRC Equipments High speed CNC, standard CNC, EDM, Wire cutting, Grinder,Lathe, Milling machine, plastic injection machine Lead time 25~30 days Month Production 50 sets/month Mold Packing standard exporting Wooden case
custom injection Plastic TPU injection cover mold Mould Analysis Supply Mould analysis in detail (pins, gate, pl, slider etc.) Mould Base LKM, DME , HASCO , etc Plastic injection mould Mould Life 100,000-300,000 shots Cavity Single/multi Plastic injection mould Mould Runner Hot Runner, Cold Runner Injection Machine 90-530T Plastic injection mould Mould material 45#, P20, H13, 718, 2738, NAK80, S136 etc Applied Software Pro/E,UG, Auto-Cad, Solid work, CAM Surface Treatment Logo print, Texture, Polishing, Painting, Chrome Plating Material available Nylon GF,ABS,PP,POM,PC.PE,TPU/TPR,PVC,PPS,HDPE Etc. Delivery time 3- 15days Plastic injection mould Specification Depends on customerâ??s requirements We offer OEM services 1. We focus on a) Strict Inspection; b)Timely delivery time c) Excellent Service. 2. Send to us your 3D drawing or sample, we supply service a) rapid portotyping b) survey and draw c) mold fabrication d) injection molding e) spray painting, printing etc. f) assembly and art package 3. Our products including: Auto parts, electrical &electronic accessaries and parts, homeproducts, office supplies, baby appliance ,medical parts, etc.
Ringlock Standard/Vertical CODE : EFC- 4001 The ringlock standard/vertical is built with ring joints to allow different levels for working and bracing the standard during loading. Uses : Used for structural and decoration work with scaffolding Used mainly for security Used largely for framework supporting Ringlock Standard / vertical is an imperative component for successful scaffolding structure. The scaffold product incorporates many striking features, and some of them are as follows: Product Features : Damage resistant Sturdy structure Anti- rust surface Durable quality Heavy load bearing strength Suitable for various form work types Fully interchangeable components Although, ringlock standard/ vertical comes in various lengths, sizes and dimensions, but you can also get a custom ringlock standard/vertical if your scaffold project requires. Following is the standard product specification of ringlock standard/vertical: Product Specification : Surface treatment: Hot dipped galvanized Material: Q235 for standards, Q235 for other components or as your request Diameter: 48.3mm Thickness of the tube: 3.25MM Rosette: Q235, 10MM thickness Components: Standard, Ledger, Brace, Metal Plank, Ladder, Base jack, Rosette, base collar Standard with spigot, ledger and brace with forged connect point Produced in our own factory, can control the zinc thickness much better Port of loading: Tianjin Samples are available ISO 9001-2000 approved. Performance: good bearing capacity, durable & stable Test: SGS, BV or as per your request OEM service is available. JRS Scaffolds is a premier manufacturer and exporter of scaffolding systems and accessories. We provide high quality scaffold product including ringlock standard/vertical at the best price. Feel free to contact us and get more information about our ringlock standard vertical.
Cuplock Standard/Vertical CODE :EFC-3001 Cuplock standard/vertical is the vertical components used in scaffold system. The cuplocks are manufactured from 48.3 mm diameter by 3.2mm wall thickness, high yield steel tube. It includes fixed lower cups and 0.5m vertical centers with a captive free upper cup to create horizontal connections to up to 4 components of the scaffolding structure. Uses : Used to connect 4 components horizontally Used to erect and strength scaffold structure Made of high yield steel Available in various sizes, shapes and diameter Cuplock scaffolding joint is created with vertical shaft with horizontal integration of cups. It is a unique node point connections which allows four horizontal components to a vertical component in a single action without using any nuts and bolts. Product Features : Sturdy construction Minimum maintenance Longer service life Cuplock standard/vertical comes in various dimensions, and therefore, you can get custom cuplock standard/vertical to handle your niche requirement. Given below is the standard specification of cuplock standard/ vertical: Product Specification : Material:Q235,Q345 Size:48.3*3.25mm Surface treatment: painted/hot-dipped galvanized ISO9001:2000 approved OEM service offered MOQ: negotiable high quality with excellent performance JRS Scaffolds is a reliable manufacturer and exporter of standard/vertical cuplocks. We produce durable and standard iron and steel alloys to manufacture these scaffold products. At Eastman Scaffolding, you will find cuplocks in various sizes, weights and dimensions, and therefore, we are able to maximize the satisfaction level of our valuable customers. Contact us to get more information about our cuplock standard/vertical and get an estimate.