Raw materials: cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. Capacity: 0.8-260t/h Max feeding size: 25mm Application: widely used in the manufacture industries Shipping ports: Shanghai, China Delivery: 15 days after received the deposit Ball mill is the key equipment for grinding after the crushing process, which is widely used in the manufacture industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other grind-able materials. This ball mill machine changes the intrinsic grinding mill structure. Its body and ground plank are an integral whole. So when fixing, it can be lowered on a plane surface once only. Use double tiered roller axletree with centripetal spherical surface as the support of the host axletree can reduce energy cost by 30%. The intrinsic grille pattern forcing evacuation is instead by over fall pattern controlling one. This can improve the milling of the granule and the quantity dealt with is reduced by 15-20%. The ball mill is a horizontal rotating device transmitted by the outer gear. The materials are transferred to the grinding chamber through the quill shaft uniformly. There are ladder liner and ripple liner and different specifications of steel balls in the chamber. The centrifugal force caused by rotation of barrel brings the steel balls to a certain height and impact and grind the materials. The ground materials are discharged through the discharging board thus the grinding process is finished.
A) COMMODITY: ICUMSA 45 CANE SUGAR B) MOQ: 2000MT, available for containers loading. C) Payment method: 100% irrevocable, transferable, divisible documentary letter of credit at sight, 100% payable against all documents. D) Spot order accepted. *No SBLC, No BG, No RWA, No MT103 needed. Product specification: ICUMSA : 45 RBU ICUMSA, attenuation index units method # 10-1978 POLARIZATION AT 20° : 99.80% minimum MOISTURE : 00.04 % maximum SULPHATED ASH CONTENT : 00.04 % maximum SO2 : 20 PPM GRANULATION : fine standard SOLUBILITY : 100% dry and free flowing RADIATION : normal w/o presence of cesium or iodine SO2 : certified COLOR : crystal white SEDIMENTS : none SMELL : free of any smell CROP : 2016 MAGNETIC PARTICLES : MG/K4 SO : MG/K 20 MAX AS : 1 P.P.M. MAX OS : 2 P.P.M. MAX CU : 3 P.P.M. REDUCING SUGAR : 0.010% maximum in dry mass HPN STAPH AUREUS : PER 1 GRAM â?? NIL MICROBIOLOGICAL LIMITS : pathogenic bacteria including salmonella per 1 gram â?? nil bacillus per 1 gram - nil SUBSTANCE : solid, crystal PESTICIDE TRACES : maximum mg/kg basis â?? ddt 0.005 â?? photoxin 0.01 â?? hexachloran â?? gamma isomer 0.005 A) ICUMSA 600-1200 RAW SUGAR B)MOQ: 12500MT BY VESSEL, ONLY. C) Payment method: 100% irrevocable, transferable, divisible documentary letter of credit at sight, 100% payable against all documents. D) Spot order accepted.
Model:GZT-0724-GZT-1560 Max Feed Size:450-1000(mm) Capacity :30-600(t/h) Application:mine, cement, lime, ore dressing industries GZT vibrating feeder use a pair of motor with complete same parameter as vibrating source. It can continuously and uniformly feed lump, granulate material to receiving equipment. and screen material during feeding process. It has feature such as big vibrating force, high strength, impact resistance, long service. Application It is widely used for feeding big size material for crushing in mine, cement, lime, ore dressing industries. OUR ADVANTAGE 1 Vibrating source is motor, small noise, strong vibrating force. Low energy consumption. 2 Stable vibrating force and easy adjustment, can change and control material feeding any time. 3 Gap between stick on outlet are adjustable. It can separate soil and sand during feeding process, the pre-screen capability can improve the coarse crushing capacity. 4 Material trough use frame type connect with rivet, and side plate is bend by a entire steel plate, compact structure, good rigidity, fatigue resistance. 5 Both backplate and stick are made by ware-resistant material, strong structure, high strength, impact resistance. 6 Big processing capacity, reliable running, easy maintenance. GZT vibrating feeding composed of material trough, vibrating exciter, spring supporting the structure features are 1 Material trough It is material conveying and feeding part, and integrated framework, riveted by lock rivet. The lining of trough: feeding section is blind plate (incline angle is 0�5°) and outlet section is sticks (incline angle is 15�20°). 2 Vibrating exciter Vibrating exciter is key part of vibrating feeder, use new type vibration motor as exciter, stable performance reliable, easy adjustment. 3 Spring support It is seated mounted, use steel spring as damper spring, operation reliable and long service long.
PVN Plastics is one of the leading Polypropylene (PP) bag manufacturer in India and a leading exporter in the international market. We are manufacturing polypropylene bags since 1984; owing to our long experience we can offer our customers the best quality products. Our offer comprises of various types of bags and sacks. We make polypropylene woven bags and sacks according to our customer's specifications, concerning dimensions and weights. PP Woven bags are the traditional bags in packaging industry due to their wide variety of usage, flexibility and strength. Woven polypropylene bags are specializing in packing and transporting bulk commodities. Due to strength, flexibility, durability and lower cost, woven polypropylene bags are most popular products in industrial package, which are widely used in packing grain, feeds, fertilizer, seeds, powders, sugar, salt, powder, chemical in granulated form. PP Woven bags are made according to customer's preferred specifications as to mesh, denier, GSM, colour, and sizes that vary from 25 to 80 cm. widths or depending on the desired capacity. Advantages Very affordable, Lower cost Flexible and high strength, persistent durability Can be printed on both sides. Can be stored in an open area due to UV-stability, up to 6 months. Water and dust proof design due to inside PE liners or laminated on the outside; hence, packed materials are protected from outside humidity. Twisted weave and anti-skid print to prevent slipping Fully recycled For packaging of : Chemicals, fertilizers, cement, urea, minerals, resin, polymers, rubber Flour, grain, seeds, spices, pulses, dates, agro products, fish meal, cattle feed Sugar, salt Sand, metal parts, concrete elements Fruits, vegetables Mails / letters / documents.
Products Specification� Property Test Method and Unit Specification Range Softening Point Ring&Ball,°C 90-150 Color Gardner,50%Toluene Solution 3-20 Acid Value mgKOH/g 0.5 max Ash Content wt.% 0.5 max Applications: A. Paints Industry: In paint industry mainly use the high softening point of C9 aromatic hydrocarbon resin which can increase the gloss of paint and improve the adhesion, the hardness and the resistance ability of ac id and alkali. B. Tire and Rubber Industry: Natural rubber particles, and little affect on rubber vulcanization. Adding in rubber and tires, C9 aromatic hydrocarbon resin can increase the adhesion and the reinforcement and can also play as softener. C. Adhesives Industry: C9 aromatic hydrocarbon resin  has good adhesion, added in the process of producing adhesives and pressure-sensitive adhesives can improve the adhesive bond strength, acid resistance, alkali resistance and water resistance, and also can reduce production costs effectively. D. Ink Industry: In ink industry, mainly use the high softening point of C9 aromatic hydrocarbon resin which can reach the effect of show color, quick-drying and brightening and improve printing performance, etc. E. others, C9 aromatic hydrocarbon resin has unsaturated certain characteristic, can be used as paper glue, plastic modifier etc Resins Characters: C9 aromatic hydrocarbon resin is a petroleum by-product of pyrolysis C9 fraction which is produced by pre-treatment, polymerization and distillation processes. It is not a high polymer but a low polymer molecular weight between 300-3000. �Light colored granule �low acid value, good miscibility, water,ethanol and chemical resistance, the chemical stability against acid, the good adjustment of viscosity and thermal stability. �Generally, C9 aromatic hydrocarbon resin is not used alone, but as promoters, regulators, modifiers used with other resin.
Maltodextrin also known as a water-soluble or dextrin enzymatic dextrin, white powder or granules, micro-absorbent, non-sweet or slightly sweet taste, nutritional value. Water-soluble or easily dispersed in water, but also to clarify the muddy water. Maltodextrin based on various types of starch as raw material, through enzymatic hydrolysis process low degree of control over the conversion, purification, drying. Its raw materials containing starch corn, rice and so on. It may also be refined starch such as corn starch, wheat starch, tapioca starch and the like. Maltodextrin having a low sweetness, no smell, easy to digest, low, good solubility, fermented, good filling effect, easy to absorb moisture, thickening strong, good support, good stability, hard metamorphic features. Maltodextrin contains large amounts of polysaccharides, also contains metabolism of calcium, iron and other trace elements beneficial to human body and minerals, and can promote the body's normal. , maltodextrin is added to milk and other dairy products, can make the product volume expansion, easy to agglomerate, instant, brew, extended product shelf life, while reducing costs and improving economic efficiency. It can also improve nutrition ratio, improve the nutritional parity, digestible and absorbed. Maltodextrin formulated functional milk, no sugar especially milk powder, infant milk powder and other contributing in the role has been confirmed. maltodextrin or canned soups juice colored foods, the main role is to increase consistency and improve the structure, appearance and flavor. For a solid seasonings, spices, oil and other food powder, plays dilution, filling the role of agglomeration moisture can make the product easy to store. Oils in powder can also play the function of fat substitute. maltodextrin Add ham and sausages and other meat products maltodextrin, may reflect its tackiness and thickening of the strong features of the product and delicate, rich flavor, easy packaging shape, extend shelf life.
Characteristics: white or yellow crystalline particles or powder. White to brown crystalline granules or powder, easily soluble in water, slightly soluble in alcohol, insoluble in ether. 3, reducing the amount of water and cement with the cement in order to reduce the proportion of the content, W / C ratio remains unchanged. At this time, as a cement, sodium glucose reduction agent. Under normal circumstances, these two aspects of the performance of concrete that is very important: contraction and generate heat. 2, as the retarder Sodium gluconate Sodium gluconate can significantly delay the start and end of the setting time of concrete. the number of initial solidification and with addition of an amount of time proportional to that amount doubled with addition, the solidification starting time delay to ten times, which makes it capable of operating time from less a few hours to several days without compromising on strength. Especially in the long hot days and need to put the time, this is an important advantage 3, used glass bottles for cleaning agents: Beverage industry, food industry, industrial brewing for several days to hundreds of millions of glass bottles, such as soda bottles, beer bottles, milk bottles, cans bottles, soy sauce bottles, wine bottles, etc., the cleaning work is a very important thing, cleaning pharmaceutical formulations agent is a higher degree of difficulty of the technical work. At present, it has not yet appeared an ideal agent. The main problems are: detergent is not strong, easy to plug the bottle washer nozzle and pipe; rust on the bottle labels and bottlenecks to dye force is not ideal; washed trace residues on food safety is not ideal (such as phosphate the residue); wash water discharged into public nuisance (can not comply with the provisions of the national standard). Such as the use of glucose, sodium acid in its pharmaceutical formulations for glass cleaning agent body, the above problems can be solved. (The eighties has been done in the bottling Shanghai, Shanghai Brewery large trials have proof of identification) applications in this area is not yet developed, if the formation of the market potential is great.
Product Description: Micro silica ,also called silica fume or micro silica, is a byproduct of production silicon metal or ferrosilicon alloys. Silicon metal and alloys are produced in electric furnaces.The raw materials are quartz,coal and woodchips.The smoke that results from furnace operation is collected and sold as silica fume, silica fume consists primarily of amorphous(non-crystalline) silicon dioxide(SiO2),its average granule diameter is 0.15~0.20um,specific surface area is 15000~20000m2/kg,and it has extremely strong surface active. Features Characteristics: 1).Appearance is as grey&white off. 2).High electrical resistivity 3).Low Permeability 4).Superior resistance to chemical attack from chlorides,acids and sulfates 5).Low chloride ion diffusion 6).High reactive Pozzolan 7).High temperature strength 8).Improved stability ingeothermal environment Application area: 1) Concrete or Shotcrete • Increase its density and strength, improve the performance on its durability, impact resistance, corrosion resistance, anti-permeability and frost resistance etc 2) Refractory material & Ceramics material • Greatly improve its density, strength and high temperature performance. 3) Cementitous Repair Products (Mortars & Grouts) • Low permeability, increase resistance from chlorides, acids, nitrates and sulfate etc 4) Oil Well Grouting • Increase durability and compressive strength, decrease permeability, better control of gas leakage 5) Concrete Tile, roofing & wallboard,panels • Lightweight and improve the strength 6) Polymers & rubber product 7) other application, such as waterglass industry, thermal insulation material etc.
Quick details: Place of origin: Baku,Azerbaijan Material: HDPE Thickness: 1.8-4.9 mm Item: Sewage polypropylene pipes PPH Rating: IP65 Certification: ISO9001 Color: White Standard: OHSAS 18001 Specification: As your requirement OD: 50-200 mm Length: 250-3000 mm Packaging & delivery: Depends on your order. Description: Pipes made of PPH “homogeneous polypropylene” are used for the construction of internal sewer network. High physical-mechanical properties make these Pipes resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Pipes. As distinct from PVC Pipes, they have high impact resistance.Our offers Pipes made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry.Taking into consideration biological neutrality of material, Pipes can also, be used in food manufacturing industry. Sewage Pipes and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical characteristics Polypropylene sewage Pipes are 15 – 20 times lighter than similar cast iron Pipes. They are resistant to impact of detergent agents and also, there is no need to paint the Pipes. Availability of socket helps to connect them easily. Warranty period is over 50 years. • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Quick details: Place of Origin: Baku,Azerbaijan Specification: Depends on your requirement Size: 78*78-325*380 O.D: 50-100 mm Model Number: HDPE Thickness: Depends on your requirement Color: White Material: PE Standard: OHSAS 18 001 Types: Clamps,Elbows 45°,Elbows 90°,Couplings, Reducing couplings,T-Joints 45°,T-Joints 90°,Cross T 45°. Packaging & delivery: Depends on your order. Description: Installation of pipes to the interval sewer network uses from PPH “Homogen polypropylene” fitings .High physical-mechanical properties make these fittings resistant to corrosive environment. These properties can be applied both to internal as well as external surfaces of sewage Fittings. As distinct from PVC Fittings, they have high impact resistance. Our offers fittings made of PPH for waste piping, which can be applied in construction of buildings, including residential houses, cottages, offices, hospitals, laboratories, industrial establishments, as well as farming industry. Taking into consideration biological neutrality of material, fittings can also, be used in food manufacturing industry. Sewage fittings and their socket details are made of high quality white or gray colored granulated propylene. Process of production is carried out in accordance with the requirements of ISO 9001:2000. Technical parameters: Polypropylene sewage fittings are 15 – 20 times lighter than similar cast iron fittings. They are resistant to impact of detergent agents and also, there is no need to paint the fittings. Availability of socket helps to connect them easily. Warranty period is over 50 years • Resistance to hot water flows at +95°C temperature(in some cases even up up to +100°C) • Resistance to chemicals, agricultural and industrial waste water containing various types of corrosive materials and substances • Resistance to hydraulic friction • Leak connections by sealing rubber rings • Ease of pipes and fittings facilitates transportation and installation work. • As opposed to metal and PVC pipes, PPR pipes during water flow absorbs sound and vibration • Condensate does not occur due to the low thermal conductivity on the outer surface of pipe
Properties and performance: Calcium propionate is white crystal or white crystalline powder or granule, odourless or microstrip propionic acid odor.Used as food additive calcium propionate as salt monohydrate, for water and thermal stability, has the water absorbability, soluble in water, l0 of 39.9 g/ml (20 ºc), insoluble in ethanol, ether.In 10% of the calcium propionate aqueous solution to add the same amount of dilute sulphuric acid, heating can release the special scent of propionic acid.Calcium propionate alkaline, 10% of its water solution ph value of 8 ~ 10.Anticorrosion performance of calcium propionate and sodium propionate, same form propionic acid in acid medium and bacteriostasis.The effective dose of calcium propionate inhibitory relatively sodium propionate is small, but it can reduce the effect of chemical leavening agent, substitutes sodium propionate, however, its advantage lies in the pastry, bread and cheese in the use of calcium in calcium propionate can supplement food lei.Calcium propionate can inhibit the dough fermentation bacillus subtilis breeding, ph value of 5.0 minimum bacteriostatic mass fraction is 0.01%, when the ph value of 5.8 to 0.188%, the optimum ph value should be lower than 5.5. Storage:store in a cool, dry place.Store in an airtight container. Dispose:thoroughly clean after operation.Wash your hands before eating.Use with adequate ventilation conditions.Reduce dust generation and accumulation.Avoid contact with skin and eyes.Avoid eating and breathing. Notes: (1) using a leavening agent unfavorable use calcium propionate, because can be reduced due to the formation of calcium carbonate's ability to produce carbon dioxide. (2) for calcium propionate acid type preservatives, within the scope of the acid works: ph5 to mold inhibitory effect best, below ph6 bacteriostatic ability decreased obviously.
We “MANYA IMPEX” are Big and Reputed MANUFACTURER and EXPORTER of PSYLLIUM SEEDS in INDIA. Psyllium Husk Seed Properties : Psyllium husk seed has property of mucilage formation on extraction of moisture.Psyllium seeds are cooling, laxative, soothing, anti acidic, anti diuretic and demulcent. • Color: Light brown to moderate brown • Odor: Faint • Taste: Bland, mucilaginous • Total Ash: Not more than 4.0 % • Particle Size: Not more than 5.0 % on U.S.S. 35# • Moisture (loss on drying): Not more than 12.0 % • Acid Insoluble Ash: Not more than 1.0% • Foreign Organic Matter: Not more than 0.5 % Psyllium Seeds Habitat : Mediterranean region and commercially grown in north western India Like in State of Gujarat our side mostly. Psyllium Seed Pharmacology : Ovoid-oblong, boat shaped 2-3 mm, long, 0.8-1.5 mm wide, endothermic, pinkish grey to brown in color. The dorsal surface is convex with a small, elliptical or elongated shining reddish brown spot while the ventral surface is concave with a deep furrow, odor characteristics, and taste mucilaginous. Epidermal cell of testa is filled with mucilage which swells in contact with water. The cells are large. Polyhedral, thin walled, rounded in surface view. Small starch granules are simple or compound embedded in the mucilage. Inner layer of testa rather indistinct, thin walled, cells containing brown pigment. Endosperm is composed of thick walled cells with numerous piths and granular contents, embryo consisting of thin-walled polyhedral cells containing fixed oil and aleuronic grains. We “MANYA IMPEX” are Big and Reputed MANUFACTURER and EXPORTER in INDIA.Our PSYLLIUM SEEDS are basically exported to Sri Lanka, Bangladesh, Malaysia, Africa and the Middle East.We are also offer customize packing.Vacuumed packing facility also available as per our Client Requirement.
Applications When the bulk density of the fed material is not consistent, or when the precise feeding accuracy is critical to the end product quality, the loss-in-weight feeder needs to be used. The loss-in-weight feeder can be used in batch or continuous situations. Frequently it is applied in continuous processing, such as extrusion. During extrusion process, multiple ingredients` ratio needs to be controlled precisely. Characteristics Our loss-in-weight feeder can provide high precise, reliable and consistent feeding performance. Single screw loss-in-weight feeder Is the best choice for free flowing materials, while twin screw loss-in-weight feeder provides the best solution for difficult-handled materials. The loss-in-weight feeders are available with a full range of models and different sizes of hopper. It can satisfy the feed range of 0.5-1000L/hr. Load Cell and Gravimetric Control System High precise technology is adopted in gravimetric feeder. Our weighing module provides slipt second and milligram range performance. It is designed to be used in harsh industrial environment. Equipped with the first class soft ware, our loss-in-weight feeder can provides consistent, precise, reliable and repeatable results. The gravimetric controller and operation interface allows for individual unit and recipe control. Each feeder has its own control board. The control board and the operation interface is connected by industrial protocol. The online controller can combine the motor driver with the feeder controller together. HMI provides extreme flexibility for recipe storage and memory. Up to 8 feeders can be working together simutaneously and be connected to DSC system of the main processing machine. Single Screw Loss-in-weight Feeder Our single screw loss-in-weight feeder can provides high precise,high valued feeding for pellet, granule, free flowing powder and other bulk materials. The feed rate is 0.5-1000L/hr. The accuracy can reach ¡¡¡ì¡¨¨0.2%. According to the characteristics of different fed materials, the single screw loss-in-weight is available with a wide range of interchangeable screws. Plywood case, 1 set/case
Volumetric feeder provides low cost and easy option in batch or continuous applications, especially when the bulk density of the fed material is consistent or when precise feed accuracy is not so important for the quality of end product. Frequently volumetric feeder is used in gain-in-weight batch application since higher accuracy can be achieved. When process requirement is more demanding, volumetric feeder with gravimetric scale and loss-in-weight control can be used. Our volumetric feeder can provide reliable and stable performance. Single screw feeder is the best choice for free flowing materials, while twin screw feeder is the the best solution for difficult-handled materials. We have a full range of volumetic feeders with a number of models and different-sized hoppers to meet your specified requirements. Single screw volumetric feeder is applied for pellet, granule and free flowing powder to provide volumetric feeding. A series of interchangeable screws are available for our single screw feeder to meet the requirements of different materials being fed. The feeder is placed on the painted steel plate. All the feeder parts which contact fed material are made of stainless steel. The volumetric feeder can be disassembled easily for cleaning or changing parts. There are two types of hopper shape: symmetrical and asymmetrical. The hopper design can allow material from all directions to flow evenly to the screw, which can avoid material build-up and make feeding more accurate. The most suitable screw type is determined by the characteristics of fed materials. Therefore, please provide detailed information about your material when inquiring. Plywood Case, 1 set/ case
HARACOAT MX is a blend of Sulfur Coated Urea (SCU), Sulfur Coated KCl (SCK), MAP, MOP and trace elements granules to produce fertilizer based on scientific formulation and analysis. This product provides quick release and extended long release of nutrients over several months. lt is flexible and can easily be tailor-made to various crops, soil types and climate conditions. Complete source of nutrient HARACOAT MX contains total N, P, K, Mg and micro nutrients required by crops. Balanced nutrient HARACOAT MX include N, P, K, Mg and micro nutrients required by crops in correct proportion enable crops to take up all nutrients completely. High efficiency HARACOAT MX provides quick release and extended controlled release nutrients supply over several months to crops. More nutrients are taken up by crops. High efficiency, less leaching and less pollution to environment. Water solube phosphate HARACOAT MX contains water soluble phosphate (MAP, DAP) which gives greater availability of phosphorus nutrient to crops. Sulfur nutrient Additional sulfur content in HARACOAT MX enhance the efficacy of nitrogen. Flexible Composition of N, P, K, Mg and micro nutrients can easily be tailor made based on soil analysis, leaf analysis and climate conditions of the specific plantation site. 50kg plastic bag with 60micron inner
Chemical name : bis(2, 2, 6, 6-tetramethyl-4-piperidyl) sebacate Molecular formula : c28h52o4n2 Molecular weight : 480.74 Cas no : 52829-07-9 Physical and chemical properties : Appearance and behavior : white crystalline power or granules , odorless Melting/freezing temperature : 80~86¡æ Transmittance : 425nm¡ý98.0% ; 500nm¡ý99.0% Solubility (g/100g solvent , 20¡æ) Solvent Acetone Ethyl acetate Benzene Water Solubility 19 24 46
KPW VI Dehydrated White Onion (Flakes / Kibbled) Customers can purchase White Onion (Flakes / Kibbled) from us that are a dehydrated form of white onions. The white onion flakes being offered by us are extensively used in preparations of different food items such as vegetable mixes, sauces and soups. Also, these onion flakes are known amidst our customers for retaining the same taste and flavor as the fresh onion. Specifications: Organically Properties Quality Clean Material Free From Pests, Foreign Matters and Any Additives Taste Typical of fresh Onion Aroma Typical of fresh Onion Laboratory Analysis Moisture content 8% Max. Ash content 3%. Max. Acid Insoluble Ash 0.5% max. Maor Defects 1% max. So2 Nil KPW VII Dehydrated Pink Onion (Kibbled) We are offering high-end quality of Dehydrated Pink Onion to our clients. Available with us are dehydrated Pink Onion (Kibbled), which are used in different food preparations like sauces, vegetable mixes, dry soups and varied fast foods. These flakes have the same taste and flavor as that of the fresh onion and are therefore, highly demanded by our customers in the domestic and international markets. Specifications: Organically Properties Quality Clean Material Free From Pests, Foreign Matters and Any Additives Taste Typical of fresh Onion Aroma Typical of fresh Onion Laboratory Analysis Moisture content 8% Max. Ash content 3%. Max. Acid Insoluble Ash 0.5% max. Maor Defects 1% max. So2 Nil KPW VIII Dehydrated Red Onion (Flakes / Kibbled) We provide our customers with Red Onion (Flakes / Kibbled) that are obtained after chopping and dehydrating the pieces of red onions. The offered red onion flakes can be used as a replacement of onions in varied recipes and can be easily carried while camping. Owing to this feature, these onion flakes are highly demanded by our customers across the globe. Specification: Organically Properties Quality Clean Material Free From Pests, Foreign Matters and Any Additives Taste Typical of fresh Onion Aroma Typical of fresh Onion Laboratory Analysis Moisture content 8% Max. Ash content 3%. Max. Acid Insoluble Ash 0.5% max. Maor Defects 1% max. So2 Nil KPW IX Dehydrated White Onion Powder We provide our customers with White Onion Powder of premium quality. This powder is obtained by dehydration of white onion and is available with us in varied mess sizes. Widely used in different food preparations such as stuffing mixes, fast foods, soups and sauces, this onion powder is high in demand. Also, it is known for retaining its freshness, odour and colour. Specifications: Organically Properties Quality Clean MaterialFree From Pests, Foreign Matters and Any Additives Taste Typical of fresh Onion Aroma Typical of fresh Onion Laboratory Analysis Moisture content 8% Max. Ash content 3%. Max. Acid Insoluble Ash 0.5% max. Maor Defects 1% max. So2 Nil KPW X Dehydrated Pink Onion Flakes We facilitate our customers with Onion Granules/White/Red/Pink that are manufactured by dehydrating the white onions. Available in various sizes, the free flowing powder is packed in moisture free packets and ensure longer shelf life. These onion granules fine wide usage in Hotels and Restaurants and add a delicious taste to dishes and gravies. Specifications: Organically Properties Quality Clean Material Free From Pests, Foreign Matters and Any Additives Taste Typical of fresh Onion Colour White for White Onion Products,Red For Red Onion Products,Pink For Pink Onion Products Aroma Typical of fresh Onion Laboratory Analysis Moisture content 8% Max. Ash content 3%. Max. Acid Insoluble Ash 0.5% max. Maor Defects 1% max. So2 Nil KPW XI Dehydrated Garlic powder J 25 Kgs Packing
We are supplier and exporter of different types of organic fertilizer including humic acid, potassium humate, sodium humate, amino acid, fulvic acid and seaweed extract fertilizer etc. Any requires pls contact with us Specification: Sodium Humate Flakes/Powder/Granules -Humic acid 40%/50%/60%/70% -Water solubility 100% -Moisture 15%max -PH 9.0-11.0 Efficacy (1) In industry: sodium humate has a wide use in industry. It can be applied in a great number of fields such as the removal of toxic metals from wastewater and worked as additives of ceramic raw materials, improve the ceramic product quality; used as mud adjuster and filtering agent in oil drilling process. It can be also used in construction industry, paper industry, removal of toxics in contaminated soils, paints and industrial coatings, printing inks, foundry sand additives, rubber compounding and processing, absorbents, lective extractants, asphalt and bitumen compounding, grease and lubricants, roofing compo (2) In agriculture: as fertilizer additives unds, undercoatings and soundproofing, cement/concrete and emulsions;to improve soil condition (3) In livestock farming, as feed additives to prevent animal disease. Application (1) In the field of animal feed: When used in broilers chicks, add the amount of 2% to 5% per ton, for laying hens, add 2% to 5% per ton; For m, increase crop resistance ability to disease, increase crop yield.eat ducks, add the amount of feed 2% per ton; For laying ducks, add the amount of feed 2% per ton; For fattening, add the amount of feed 2% per ton; For dairy, add the amount of feed 1% per ton. (2) In aquaculture: dissolve in water at first, then sprinkle in the ponds, control the range in 0.0001-0.001% which is 1-10mg/l (1-10 g/m3), otherwise it will inhibit the growth of fishes or cause poisoning. (3) In hospital, according to the corresponding medical manual properly. (4) In ceramic industry, the ratio depends on the different clay, glaze raw material etc. Packaging & Delivery Package: In 25kg net plastic coated paper bags lining inside. Delivery Date: within 15-21 days after receiving customer's payment. Storage & transportation Stored in dry, cool airiness place, far away from heat, avoid insolation, no moisture. When in the transportation and outdoor storage, it should be keep away from moisture, insolation, rain and high temperature.
Dear CLIENT ! Thank you for your attention !  We have a lot of petroleum products (the our seller is ticked ; ). We supply all petroleum/gasoline products except mazut .We have direct relationships with some of the largest refineries. We can deliver FOB Rotterdam, Houston, UAE . Spot discount price is now around 15-20-25% below Rotterdam platts . MOQ 50 000 MT . If you are looking for a suitable supplier , please contact us . Fewer orders are negotiable, our goal is a long term business relationship. ICPO will be given after acceptance of the enclosed petrol products procedure. FOB PROCEDURE for CRUDE OIL , D2, D6, KEROSINE etc.. 1. LOI+bank statement 2. SCO 3. ICPO.� Buyer issues and send irrevocable corporate purchase order (ICPO) with seller's transaction procedure along with passport copy of the company representative. The buyer will also provide TSA to the seller. 4) Seller issues Commercial Invoice (CI). 5) Seller releases Injection Programming Agreement (IPA) to Buyer for affirmation to program product injection with Buyer's tank farm. 6) Upon successful programming, Seller's representative, SGS Team, and Buyer's representative meets at seller tank storage for the tank and pipeline verification and Seller issues the hard copy POP documents to buyer representatives in person (Face to Face) �·� � � � Quantity and Quality Certificate (SGS) 48hrs fresh Tank Storage Receipt (TSR).  Product Passport (Dip Test Result).  Statement of Product Availability.  Refinery Commitment to Supply. Authorization to Sell/Collect (A TSC).  Authorization Letter to Verify the Product with the Tank Farm. Company Registration Certificate. 7) Upon successful verification of documents and SGS report by buyer's team buyer commence dip test in sellers' tank, if need be, for more confirmation. 8) Upon confirmation of product Q&Q, begins injection into buyers' tank storage all parties sign NCNDA/IMFPA. 9) The buyer makes payment by MT103 or TT wire transfer for the total product available. B R G PS: There is wheat, corn, granulated sugar (beet sugar), edible oils, non-Gmo soy, urea 46 and other fertilizers, DAP, NPK . As soon as we receive your completed LOI document, we will send you the FCO (I have attached on request ,a sample LOI from the company vendor).
Brief Introduction: The series products are refined green microbial multi-functional probiotic feed additives, extracted from deep liquid fermentation of Bacillus Subtilis, which is breeded by special process. This series products are avirulent, harmless, no residues, no pollution and the effect is remarkable, which is the best choice for green healthy and environment friendly breeding. It is widely applied in feed additives of poultry, livestock, aquatic animals, ruminants and etc. Product Functions: 1. Adjust effectively micro-ecology bacteria group balance in animal gut, restrain the growth of colibacillus, salmonella and other harmful bacteria and promote the growth of beneficial bacteria breeding, such as lactobacillus, bifidobacterium and etc. 2. Improve animal immunity; reduce animal morbidity and the dosage of antibiotic. 3. Increase digestion utilization rate of feed, promote animal growth, reduce feed dosage and improve the feed efficiency. 4. Reduce excretion of ammonia and nitrogen in animal waste, decrease the concentration of harmful gas in breeding place for livestock and poultry, improve the breeding condition and reduce environment pollution. Mechanism: This Series of products compete with harmful bacterium for the attachment points in digestive tract, produce antibacterial material, and compete with harmful bacteria to get nutrients, strive for oxygen by biological mechanisms ,thereby, establish normal microflora in digestive tract; adjust and improve immune function; improve digestion and absorption function; prevent toxic amine synthesized. Product Features: 1. The strains are safety strains which are listed on "feed additive varieties directory" issued by the Ministry of Agriculture; breeded by special submerged fermentation process, especially meet the animal breeding need in domestic and overseas. 2. Refined and extracted by deep ventilation liquid fermentation process with high content of CFU, and no miscellaneous bacteria. 3. Good stability, such as acid-proof, salt-tolerant, heat-resistant and compression resistant; maintain high stability during feed granulating and the process of getting though the acidic condition in stomach. 4. Available in many kinds of strong enzyme activity, including protease, lipase, amylase and etc., which can effectively complement endogenous enzymes in intestinal tract, thereby, improve digestion and absorption of animals. 5. Produce B vitamins such as B1, B2, B6, vitamin C and vitamin K2 during the growth and breeding of animals, which provides vitamin nutrition for animals. 6. Safety, green, and non-toxic without pollution and side effects. Packaging Details 20kg/bag, 25kg/bag or as clients' requirements Lead Time: within 2 weeks after signing the sales contract
