Laser Lens Suppliers and Manufacturers

Description- The UV Laser Marking with its wavelength 355nm is suitable for marking plastics (ABS, PA) due to a high repetition rate. The UV laser wavelength is suitable and versatile in marking a wide range of materials and is perfect for â??cold markingâ?? applications where heat zones are not allowed. UV Laser mark at very high speeds which are indispensable for short cycle times in industrial manufacturing environments. With high peak powers they are most suitable for fine marking and structuring without thermal impact on glass applications and/or ceramics. The UV laser marking will mark plastics and silicon materials without the need of additives and will also mark glass with drastically reduced risk of micro fracture. The excellent beam quality also affords this laser the ability to be utilized in micro marking applications such as electronics, circuit boards and microchips in addition to solar panels and precise medical marking applications. They also provide an excellent quality for classical laser marking applications and micro material processing. Features- Small beam diameter and fine marking line Good quality and high laser beam stability Complete machine stability, simple and easy operation Narrow pulse width, small heat affected zone, work-piece without damage Suitable for sensitive material as cold light source Laser directly acting on molecular chain with maximum extend to avoid thermal effect It works stably, applied in superbly precise marking, such as: LCD, wafer, chip ceramic, sapphire, precise surface marking of other materials,3C electronics, Lamps, food package, wire rod ,leather, ceramic, PCV, glass, Phone case, medicine bottle, fine marking on glass substrate, electric appliance marking and so on. Technical Specifications- Wavelength 335nm Laser Beam Mode TEM00 Average Power Up to 2W Positioning Visible Red Diode Light Input Power 115/230VAC 50/60Hz System Power Consumption < 950W Cooling Air Cooled, active thermo-electric/Water Cooled Operating Temperature Range 18 to 35C (64 to 95F) Humidity 10% to 85% Non-condensing STANDARD LENS CONFIGURATIONS FOCAL LENGTH 100 mm 65 mm X 65 mm (2.56 X 2.56) 160 mm 110 mm X 110 mm (4.33 X 4.33) 255 mm 175 mm X 175 mm (6.89 X 6.89)

Description- Color Laser Marking Machine used to coloured parts are commonly used from decorative applications in a wide range of consumer goods and marking of these parts is generally achieved though the removal of the coloured anodised layer to reveal the base aluminium material either a white or silvery mark depending on process conditions. Commonly used in gift-ware and consumer goods, alphanumeric and marketing logos are typically marked. The use of lasers for colour marking is not a particularly new technique as it has been recognized for over 10 years. This technique was originally identified as a viable process for use on craft metal work and jewellery. However, the process has had very little commercial impact in the intervening years. There is now a greater interest in this process as manufacturers of consumer goods are looking for new techniques and finishes to provide product differentiation. This application note looks at a variety of materials that are colour mark-able including titanium and stainless steel, and explores the benefits and parameters of the pulsed fiber laser in relation to this application area. Specifications- Significant improvement in the quality of the mark due to the stability and controllable of the laser source. Beam intensity and spot size enable the use of small mark widths. Output power stability over time enables complex mark patterns without power fluctuations â?? no weld defects. High power density allows large marking areas to be processed rapidly. Maintenance free (no replaceable parts). 3-Dimensional marking can be easily achieved. High repetition rate is achievable. Low frequency (

Characteristics- High Quality Laser cavity with life more than 8 to 10 years before service. Laser power feedback controller. Stable optical performance round the clock. Maintenance free Lamp operating life more than 400 hours or personalized design with ergonomics principles. Fast, efficient, deep, little distortion, little heat-affect area quality welding, welding points free from pollution, saves energy. Features- The energy, pulse width frequency and light spot size can be adjusted to achieve different welding effects. The parameters are adjusted by the lever in the sealed cavity, which is simple and highly efficient. Ceramic converging cavity is imported from Britain. Jewellery Laser welder is corrosion resistant and high temperature resistant, and has 8-10 years service life. Uses the most advanced light shielding system to eliminate the irritation to eyes by light during working. Able to work round the clock with same stable performance. Maintenance free operation for 10,000 hours. Ergonomics â?? Based design avoids fatigue even after long time working. Jewellery Laser welder is widely used in aviation, Aerospace, Sports Products, Jewellery, Golf head, Medical instruments, Titanium alloy dentures, Instruments, Electronics, Machinery, Automobile etc. It is specially used for perforating Gold and Silver jewellery, Spot welding, Repairing, Inlay and welding of claw. Technical Specifications- Model SIL 200 W Max.output power 150 / 200 W Max.pulse energy 100 / 120 J Peak power 6 / 7 KW Pulse duration 0.1 20 ms Pulse frequency 1-100 Hz Pulse duration 0.1-20 ms Welding depth 0.1-4.0 mm Focal diameter 0.1-2.0 mm Vision system Stereo microscope 10X Power supply AC 220 V / ± 10% / 50 Hz Net weight 150 kg control system Microchip CPU

Description- SIl 3D 6axis Robot fiber laser cutting machine can be adopted with multiple automations that iclude gantry and double sided gantry system.Fixtures and automation gives and advantage as to excellant dynamic response and lower weight.The SIl robotic cutting system adopts world class robot from Fanuc or YASKAWA integrated with Fiber laser source and best of designed cutting head.This machine performs well with its high precision, high efficiency and low noise when running at full capacity. SIL 6-Axis laser cutting machine is used in precisely cutting 3D parts with complex surface. Specially suitable for cutting covering parts of automobile and aviation industry, such as edge and hole cutting. It can replace the traditional trimming die and piercing die. It can realize 3D partsâ?? high quality, high precision and high efficiency cutting, without needs of secondary processing. Features- Free movement with greater reach at 270 degree angle Advanced Laser cutting head with auto focusing Suitable to Edge cutting of Hydro formed parts of Automobiles Auto tracking system Expert in 3D Cutting with arbitrary curve 6-axis mechanical arm gives four times more output Advantages Stable and reliable light path system and control system Imported original fiber laser generator with great and stable performance,lifespan is over 100,000 hours High cutting quality and efficiency with cutting speed up to 25m/min and beautiful,smooth cutting edge High performance reducer,gear and rack;Guide rail and ball screw to guarantee Application Area- Mainly used in 3D precision cutting of aviation, automobile industry, construction machinery , mold, fitness equipment and sheet metal processing, etc flexible laser manufacturing system is made up of advanced international FIBER laser, 6-axis industrial robot and control system. It meets well the demand of quenching, tempering, normalizing, alloying, cladding etc. This 3D robot laser cutting machine is specially for cutting thin metal ,such as carbon steel,stainless steel,brass,aluminum ,etc

Descriptions- Laser micro machining techniques are currently used by the automobile and medical industries as well as in the production of semiconductors and solar cell processing. Lasers for micro machining offer a wide range of wavelengths, pulse duration (From femto second to microsecond) and repetition rates (from single pulse to Megahertz). These attributes allow micro-machining with high resolution in depth and lateral dimensions. The �eld of micro-machining includes manufacturing methods like drilling, cutting, welding as well as ablation and material surface texturing, whereby it is possible to achieve very �ne surface structures ranging in the micrometer domain. Such processes require a rapid heating, melting and evaporation of the material. The use of extremely short nano- and pico-second and even femto-second pulse duration helps to minimise the thermal effects such as melting and burr formation thus eliminating the need for any post processing measures. Features- Type of Lasers: QCW Fiber, Nano Second, Pico Second, Femto Second, UV, IR or Green Applications: Micro Cutting, Micro Hole Drilling, Micro Milling, Dicing, Ablation, Engraving, Etching Flexible design for all your micro machining requirements. The system can be configured as per your Requirement. 2 D plannar cutting with precision focus adjustment for dicing, stealth dicing or ceramic cutting Accuracies up-to 1micron for 100mm travel. Special air bearing slides for higher accuracies Add rotary axis for micro tube machining Add short focus plannar Lens Close loop scanner for submicron machining of precision parts Add Trepanning for micro hole drilling from 0.25mm or lower & up-to 1mm.

Fiber laser protective windows, laser lens, laser focus lens, laser ceramic ring and nozzles, cynosure candela laser focus lens and slider windows, ipl sapphire crystal uvfs ipl prism bk7 ipl light guide.

This laser illuminator is high performance integrated with high quality fiber-coupled laser diode and excellent optics design, and outstanding circuit control with high efficiency. It has big beam angle zooming, which can match the field view angle of cameras. It also has friendly interfaces such as operating voltage, communication protocol and installation schematic. It can be widely used in high-speed dome, PTZ camera and traffic monitoring. This illuminator is compatible with major lens and cameras, integrated with the protocols such as Pelco D and QLINK. It is easy for users to implement the illuminator. Simultaneously, Position can be preset via serial port, users can call the instruction to operate conveniently in use. As the optic head is separated from diode and circuit, it is very easy to collimate the laser lens and camera lens, which can make the tunable rack compact.

Features Beam angle zooming electrically, up to 1200 steps Illumination over 2000m range High reliability, lifetime up to 20000hrs Compact, easy to integrate RS232, RS422, RS485, TTL interface optional Negligible off-axis divergence, easy collimate with camera lens Uniform beam intensity, speckle free Operating state memory Predefining position Low heat, high efficiency Applications Highway monitoring PTZ camera Harbor monitoring Forest fire prevention Boundary monitoring Traffic monitoring Military applications Description This laser illuminator is high performance integrated with high quality fiber-coupled laser diode and excellent optics design, and outstanding circuit control with high efficiency. It has big beam angle zooming, which can match the field view angle of cameras. It also has friendly interfaces such as operating voltage, communication protocol and installation schematic. It can be widely used in high-speed dome, PTZ camera and traffic monitoring. This illuminator is compatible with major lens and cameras, integrated with the protocols such as Pelco D and QLINK. It is easy for users to implement the illuminator. Simultaneously, Position can be preset via serial port, users can call the instruction to operate conveniently in use. As the optic head is separated from diode and circuit, it is very easy to collimate the laser lens and camera lens, which can make the tunable rack compact. Specifications ParametersTypical valuesUnitRemarks Model no.LL2002-0023-xxxCAA Laser modeMutimode- Wavelength808/915±10nm Optical power7 (808nm)/10 (915nm)w@exit Spot shapeCircular Illuminating distance2000m Spot uniformVery good Fan angle0.3-15 (808nm) /0.2-15 (915nm)° ±0.2° Operating voltageDC12V Operating current

CO2 laser tube, laser power supply, power meter, lens and mirror.

Laser power supply, laser tube, laser machines, focus lens, reflective mirrors.

Mini Enclosed Fiber Laser Marking Machine 20w/30w/50w Raycus/JPT laser source Sino Galvo Lens Opex 100-300mm field lens double red point position system BJJCZ original main board EZCAD original software up and down move door Enclosed body type , safe marking protective

DESKTOP LASER ENGRAVER 70 PRODUCT DESCRIPTION The MIMO desktop CO2 laser machine is mainly for engraving. You can choose different working platforms such as honey comb platform or knife strip panel platform for different materials. The light and compact design make the operation very easy. The small laser power and special lens help to achieve the best engraving and cutting results. You can choose the rotary device to engrave cylindrical work-pieces, and you can also choose the auto focus & up and down table if you have to work for different materials thickness. FEATURES Process Materials: Acrylic, Abs, Glass, Fabric, Laminates, Leather, Paper, Plastic, Wood and other Non-metal Materials Application: Arts, Crafts, Awards, Trophies, Gifts... Specification: Working Area (W *L): 700mm * 500mm (27.5â?? * 19.6 â??) Software: Offline Software Laser Power: 50W Laser Source: CO2 Glass Laser Tube or CO2 RF Metal Laser Tube Mechanical Control System: Step Motor Belt Control Working Table: Honey Comb Working Table or Knife Strip Working Table Max Speed: 1~400mm/s Acceleration Speed: 1000~4000mm/s2 The company MimoWork develops and designs laser systems for non-metal material processing in the industry. We are committed to providing the most suitable solutions for laser cutting, marking, perforating and engraving. With over 20 years of combined expertise in the worldwide laser application industry, MimoWork offers clients comprehensive services, integrated solutions and results are unparalleled. In a continually evolving industry, you may want an experienced partner to bring you the new technology to challenge tradition. MimoWork does not just manufacture the laser systems, more importantly, the company goes deep to understand every client's manufacturing process, technology context and industry background. We analyze the unique business needs of each client, run the sample tests and evaluate each case for the purpose of providing responsible advice. MimoWork values our customers, we offer comprehensive supports for worldwide business. As a leading laser cutting machine manufacturer who is capable to produce contour laser cutter, super large format perforation machine, we guarantee quality and guarantee on-time delivery. If you are looking for Laser Cutting Machine, we will be your best choice! Click here for more information about Desktop Laser Engraver 70.

1. Adopt industrial heavy duty steel structure, plate steel joint welding with square pipe steel, under heat treatment, will not deform after long time using. 2. Configure with Japan THK linear rail for all axis, to ensure durable and high precision for long time processing. 3. X, Y axis configure with high accuracy grinding type gear rack, Japan Shimpo reducer, high speed and precision can be ensured, Z axis are transmitting by high accuracy rolling ball screw. 4. Adopt France Schneider AC servo system for all axis, larger power, close-cycle control, high precision positioning, stronger torque force, dynamic corresponding time is shorter, and the overload resistance ability is strong. 5. Adopt industrial optical fiber cutting system, easy to install, maintenance and cam module based on autocad kernel development, built-in process, ensure high-quality cutting effect. 6. Adopt professional WSX, Raytools laser cutting head, imported optical lens, focus spot smaller, cutting lines more precise, higher efficiency and better processing quality can be ensured. 7. Dual air path control, equipped with Japan SMC intelligent gas unit, automatic pressure regulation, air exchange, pressure detection, more simple to use. 8. Fiber laser transmitting, flexible processing, realized high accuracy cutting on every point. 9. Compatible with multiple software, can design ant graphic and letters as you like, operating simple, flexible and easy.

Features Beam angle zooming electrically Illumination over 3000m range High reliability, lifetime up to 20000hrs Compact, easy to integrate RS232, RS485, TTL interface optional Negligible off-axis divergence, easy to collimate with camera lens Uniform beam intensity, speckle free Operating state memory Predefining position Low heat, high efficiency Applications Highway monitoring PTZ camera Harbor monitoring Forest fire prevention Boundary monitoring Traffic monitoring Military applications Description This laser illuminator is high performance integrated with high quality fiber-coupled laser diode and excellent optics design, and outstanding circuit control with high efficiency. It has big beam angle zooming, which can match the field view angle of cameras. It also has friendly interfaces such as operating voltage, communication protocol and installation schematic. It can be widely used in high-speed dome, PTZ camera and traffic monitoring. This illuminator is compatible with major lens and cameras, integrated with the protocols such as Pelco D and QLINK. It is easy for users to implement the illuminator. Simultaneously, Position can be preset via serial port, users can call the instruction to operate conveniently in use. As the optic head is separated from diode and circuit, it is very easy to collimate the laser lens and camera lens, which can make the tunable rack compact. Specifications Parameters Typical values Unit Remarks Model no. LL2003-0023-xxxCAA Laser mode Mutimode - Wavelength 808/915/940/975±10 nm Optical power 15 w @exit Spot shape Circular Illuminating distance 3000 m Spot uniform Very good Fan angle 0.3-15/0.2-15° ±0.2° Operating voltage DC12/24/48 V 24V AC optional Operating current - A Operating mode CW Lifetime 20000 hrs Operating temperature -20- +5 Storage temperature -40- +85 Power consumption

Features- New integrated design incorporating CNC control panel, laser source with the machine. Machines up to 3 KW shipped with Laser Source integrated to the machine. SIL machines with ECAT technology are IOT 4.0 ready. Remote access and pre-alert of maintenance and health of machine reduces downtime of machine. Three Vision Cameras helps monitors the cutting process, pallet exchange and operator console. Sheet clamping mechanism secures the sheet while cutting process. Two stage capacitive detect gives sheet angle precision detect and adjust nested sheet accordingly. Collision problem prevention camera with special CNC advanced controllers option with anti crash detection and high speed Z Axis retraction on no sheet underneath or nozzle touch. QR code scanning system to controller helps to retract right parts and design to be loaded and avoid mistakes and errors from machine operator. Production process controlled as per the QR code of the sheet to be processed. Six zone fume extractor. Machine compatible with Nesting softwares from Sigmanest ,Lantek and Metallix. Auto Nozzle Exchanger (Optional) Auto Nozzle Cleaner (Optional) Nozzle Beam Centring (Optional) Slat Conveyor (Optional) Technical Specifications- MODEL F-Pro 3015 F-Pro 4020 F-Pro 4025 F-Pro 6020 Working Area 3000 x 1500 4000 x 2000 4000 x 2500 6000 x 2000 Laser Power Source (IPG, FANUC) 1-15 kw Positioning Accuracy â?¤ �± 0.05 mm / m Repositioning Accuracy ± 0.02 mm Maximum Rapid Speed 120 180 m / min * Maximum Acceleration 1.5 2.5 G * Controller SILCUT 2.0 ECAT / Beckhoff / Fanuc / FSCUT

1. Laser head with red dot positioning device. With red dot you can find the working point automatically. 2. Laser control part. We offer RD 4332 controller or Leetro 6565 controller; both are wonderful for laser cutting and engraving job. 3. Laser Tube. Chinese CO2 glass tube, easy to install and less cost. 4. Industry water chiller. To cool the laser tube during working, ensure the laser tube can work for long time without damage. Normally CW-3000 for 80W tube, CW-5000 for 100W tube, CW-5200 for the tube more than 100W.The alarming cooling case ensures that the machine works safely. 5. Exhaust pump. Inhaling the smell which caused by plastic material during cutting. 6. Aluminum bars table. The special narrow aluminum table reduces the damage to materials by reflected light. 7. Acrylic sheet measurement. This is for customer to know the focus distance of the laser machine, more convenient 8. Lens and Mirror. We use 20MM USA focus lens with focus 50.8mm or 63.5mm. Mirror is 25MM with the best material in China. Working size: 1300¡¨¢900mm (4.27'¡¨¢2.95')