Material: crepe paper Adhesive: heat activated adhesive Width and length: according to customers requirements Colors: beige The products characterized by having low initial tack, excellent adhesion under high temperature, used in combination We can manufacture the size of the products you need
Pvc pipe wrapping tape This product is made from qualified pvc film and rubber pressure-sensitive adhesive. With the characteristic of weather resistance and anticorrosion, it is widely used for corrosion protection and ground pipes like air duct, water pipe and oil pipe
1. Double-side or sigle-side copolymer coating.Colors is green. 2. Length: 1030-5000m 3. Width: 12-800mm 4. Steel base thickness: 0.15/0.155mm 5. Film thickness: 0.050mm 6.Total thickness: 0.21/0.25mm 7.Tensile strength >300mpa 8.Elongation>15% 9.Peeling strength>6.13n/cm 10.Heat seal of tape>17.5n/cm 11.Usage:for cable armouring Sea worthy packing
I description: Polyethylene anticorrosive tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene Iii Features Excellent adhesion to pipe and self Resistant to uv Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets astm d 1000 standard Cold applied Technical datas: Inner wrap tape: xunda-t 100 series TypeT-150T-165T-180 Total thickness0.51 mm0.65 mm0.80 mm Polyethylene film0.31 mm0.34 mm0.39 mm Synthetic adhesive0.20 mm0.31 mm0.41 mm Elongation at break„d 400% Tensile strength60 n/cm61.2 n/cm63 n/cm Yield strength35.5 n/cm42.3 n/cm45.5 n/cm Peel adhesion to primed pipe21.2 n/cm26.5 n/cm33.2 n/cm Dielectric strength35 kv/mm45.8 kv/mm48 kv/mm Cathodic disbandment0.24 in radius 6.4 mm Volume resistivity2.5 x 1012 ohm.M Water vapor transmission rate „t 0.1gm/m2/24h Water absorption rate < 0.06% Recommended application temperature -5 to +600 c Max serve temperature-40 to + 800 c ColorBlack Available roll size (width x length)2" to 9" x 50 to800 feet. Paper cartons packing with waterproof membrane.
Polyethylene anticorrosion tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. The outer-layer tape backing shall be compounded so that it will be resistance to outdoor weathering. The outer-layer tape shall be applied after the inner-layer tape by hand or with a wrapping machine. Ii structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene Iii features: Excellent adhesion to inner-layer tape and self Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets astm d 1000 standard Cold applied technical datas: Outer wrap tape: xunda-t200 series TypeT 250T 265T 280 Total thickness0.51 mm0.65 mm0.80 mm Film0.38 mm0.51 mm0.63 mm Adhesive0.13 mm0.14 mm0.17 mm Elongation at break„d 400% Tensile strength45.3 n/cm50.8 n/cm60.1 n/cm Yield strength35.9 n/cm43.4 n/cm45.8 n/cm Dielectric breakdown32.9 kv/mm43.5 kv/mm45.2 kv/mm Cathodic disbandment0.24 in radius 6.4 mm Volume resistivity2.5 x 1012 ohm.M Water vapor transmission rate „t 0.08 gm/m2/24h Water absorption rate < 0.07% Recommended application temperature -50 to +600 c ColorWhite Available roll size (width x length)2" to 9" x 50 to 800 feet. Paper carton packing with waterproof membrane.
Polyethylene joint tape is cold applied tape coating system for anti corrosion of field joints, fittings, and specifically pipeing. The adhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. The joint wrap tape shall be applied by hand or with a wrapping machine. II structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: special blend of stabilized polyethylene III features: Heavy duty adhesive Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Conformable to irregular shapes. Meets astm d 1000 standard Cold applied Technical datas: ItemT-365T-380T-3100T-3130 Total thickness (mm)0.640.761.021.27 Backing thickness (mm)0.280.300.350.50 Adhesive thickness (mm)0.360.460.670.77 Tensile strength (n/ cm)456080100 Elongation (%)400 450450500 Adhesion to prime pipe (n/cm)25 Dielectric strength (kv/cm)404242.545 Volume resistivity.M)2.5x10122.5x10122.5x10122.5x1012 Water vapor transmission rate24h0.1 Water absorptivity (%)0.10.1 Uv resistance 600h80 %80 %80 %80 % Application temperature -5 to 60 0 c Max serve temperature-40 to 80. Paper carton packaging with waterproof membrane.
Polyethylene 3ply tape is cold applied tape coating system for corrosion protection of oil, gas, petrochemical, and waste water underground or overhead pipelines. It is a three-ply cold applied tape with stabilised polyethylene bcking and butyl rubber adhesive layers on both sides.It is also used as inner-layer tape. It shall be applied by hand or with a wrapping machine Features: Excellent bonding between adhesive and carrier film via co-extruded intermediate layer. Mechanically highly resistant tape system. Practically impermeable to water vapour and oxygen. Resistant to soil bacterial and soil electrolyte. Compatible with coating from PE, PP, FBE, PU, CTe and bitumen and EXT A total coating system with: High adhesion and shear resistance Resistance to corrosion disbondment High electrical resistance High dielectric strength High corrosion protection for steel substrates Iii technical datas Properties UnitT 480T 4100Test method Color carrie film Adhesive inner layer Adhesive outer layer--Black(grey/green) Black BlackBlack(grey/green) Black Blac-- Thickness carrie film Internal adhesive External ahesiveMm Mm Mm0.3 0.34 0.160.3 0.45 0.25Astm d 1000 Tensile strengthN/cm6770Astmd1000 Elongation at break%450500Astmd1000 Peel strength to pipe surface at 23 At 50N/cm 18 1.3 20 1.5En 12068 Annex c Peel strength tape to tape at 23 at 50N/cm 25 3.5 30 4.0En 12068 Annex b Dielectric strengthKv/mm3233.8Astmd149 Insulation resistanceOhm.M÷10121012En 12068 Water vapor transmissionG/ m2 /24h0.10.1Astm e 96 Brittleness temperature-464-464Din53372 Water absorption%0.1 max0.1 maxAstm d 570 Impact resistance at 23¡æJ1818En 12068 Cathodic disbandment at 23¡æc At 50¡æcMm15 3015 30 En 12068 Lap shear strength at 50N/mm20.050.05En 12068. Paper cartons packaging with waterproof menmbrane.
Material : HDPE Type: masking film Usage: car paint masking Feathure: electrostaic adhesion Hardness: soft Processing type: blow molding Transparency: transparent. Size: 3.8mx100m/4mx150m/4.8mx150m/4.87mx120m Thickness: 0.01mm.
Anti slip tape is widely used for sticking on the stairs, walking areas, factories, kitchens, scooters, slip slide etc. It plays a role of anti slip and can avoid fall accidents. Our anti slip tape is with PVC/PET backing, coated with solvent acrylic tape. The sand grits are from 40 to 100. The most popular is grit 80. Different colors and sizes are available. If you are interested in our anti slip tape, please feel free to contact us.
Detailed product description: The hot fix tape is used to position and transfer the hot fix rhine stone and laser pattern onto the fabric. Backing: PET film Thickness of backing: 40mic Release liner: 70g White/black PP film Adhesive: Water based acrylic Thickness of adhesive: 33micron Applicable temperature: 0-180DC Specification: 24cmx100m/32cmx100m Carton quantity: 6 rolls/carton Carton size: 72*48*26cm/72*48*34cm.
Features:Low initial tack, excellent adhesion under high temperature,used in combination with kraft paper;It has good holding power&solvent resistance. Applications:Applied to taping electronic compenents.
Features:Good tensile strength,twined even.Assorted colors available. Applications:The belting tape coated with non-adhesive belting tape applied of the transformers and the plug-in,SY7797 mainly used in the separation and protection of transformers or other electronic components.
-Easy to apply and remove. -Specially treated film clings to surfaces and is easy to clean up. -Re-commanding indoor house paint such as difficult surface like kitchen, furniture, bath and anywhere. Weight: 56g.
Product Name: DF09-01 Insulation Butyl Tape for Communications 1. Product Description: It's free shaped and durable used. Serve as excellent moisture seal for cable and duct using in conjunction with PVC electrical adhesive tapes. Usage temperature: -55 to 90 Operation temperature: -18 to 55. 2. Application: Provide simple and quick seal, repair and insulation for the waterproof targets. 1) Keep waterproof and sealing of joints for communication equipments such as base stations, antennas and feeders. 2) Provide insulating and waterproof of overhead insulated wires. 3) Repair the jackets of communication cables. 3. Specification: 600mm*63mm*3mm; 600mm*63mm*1.5mm Color: Black. Packing: Cartons.
Product Name: DF802 Butyl Tape for Automotives (High Viscosity Sealing Tape) 1. Product Description: It is non-curing double-sided waterproof sealing tape with high viscosity. Bonded almost all the irregular surfaces because it has excellent performance on shaping. Be good at resistance of corrosion and moisture. Do well in anti-water, anti-acid, anti-alkali and anti-aging. 2. Application: Used in automotive, electronics, refrigerated trucks, containers and etc., sealing for airtight and watertight structures. 3. Specification: 3mm*8mm*7m Color: Black; Gray. Packing: Cartons.
1.) Size : Thickness: 125,135,150 Mic Width:520mm,980mm,1020mm,1265mm,1270mm,1280mm,1300mm,1620mm ,1640mm,and others Length: 1500-1800m Color: white 2.) Features : Basic material : crepe paper Color: Beige Adhesive: rubber glue Total thickness:> 0.145 mm The adhesive :> 10 # 180 .c peel:> 5.5 N/25 mm Adhesion:> 6 H Temperature: room temperature, 60C, 80 C,10C .130 C .150 C.160 C .180 C .190 C .200 C .250 C Tensile strength:> 75 N/25 mm Elongation:> 9 3.) Main usage: High strength glue, good performance in paste resume, good stability. Applied to metal coating, circuit boards, copper positioning drilling, plastic positioning and spray, computer casings and electronic positioning spray painting and other purposes. Quantity: 1200rolls/day.
Polyimide Tape uses polyimide film as the backing material and is coated with silicone adhesive. It possesses excellent electrical insulation, dimensional stability, high temperature resistance, and leaves no defective gum when tearing off. This product can be used to masking Gold edge fingers and edge connectors during soldering and reflow soldering process within the PCB assembly industry. It is also used in electrical switches, motors, electronic transformers, relays, cables, coils, capacitors and electrical insulation applications meeting class H requirements in lithium battery.
Advantage 1.Long term light fading and water fastness protection. 2.Enhance inkjet image durability up to 2 years. 3.Excellent adhesion on lenticular and Glass or Inkjet media. Usage 1.For photo protective with glass or lenticular 2.For window decoration protective 3.Any pasting in the middle of transparent flat board and inkjet picture. One roll, one carton
Using with cable
Easy metal corner tape is made up of a strong kraft paper tape reinforced by two parallel corrosion resistant metal strips and is the ideal solution when dry lining and plastering archways, curved and irregular inside and outside corners, and unusual angles. Galvanized steel and aluminum trips are available. Specification: The easy metal corner tape comes in consumer and contractor roll sizes varying in size from 7.6m (25'), 30m(98.4') and 30.5m (100') rolls. Other length upon customers' request. Packaging: Individual box, 10 rolls/carton. Easy is the best policy! Individual box, 10 rolls/carton.