Configuration accompanied the machine Air agitator, vacuum pump (including cooling water pump that is started in the same step, water tank), electric control system, electric heating system, 5 layers silica rubber bags, furnace body and electric load/unload section. Parameter : 1.Dimension (L*W*H):3750*2250*2000 mm 2.MAX. area of glass to be processed: 3100*1800 mm 5 layers silica rubber bags (its size: 3400*1950mm) 3.Thickness: 3-15mm 4.Power: 43KW 5.N.W: 2.5T 6.Layer:5 layers (for circulating)
Glass heat bending furnace (NEW type)-FY-W-A This machine have top and bottom heating chambers, the top chamber is for heating and bottom chamber is for fixing shapes. Its temperature is controlled by imported PLC. The platform is elevated by air cylinder. It is easy to be operated. It takes about 5 hours to finish one time. It is suitable for heat bending glass, such as, glass furniture, glass coffee table, glass sanitary right corner counter top and decorative project glass, etc. Parameter: 1.thickness : 3-25mm 2.power : 380V/26kw 3.dimension : 2700*1441*1320mm 4.inner size : 2300*1100*700mm 5.N.W : 1.2T 6.Speed: heating time 2-2.5 hours cooling time 3 hours
1. Loading capacity - 400 kg to 1200 kg gross 2. Heating - electric heater type/ gas type 3. Quenching - oil quenching or molten salt 4. Atmosphere - nitrogen methanol, endo gas As per the equipment
1.sintering and thermal treatment of hard alloy products. 2.precise temperature control. 3.non-protective gas operation. Vacuum Sinter Furnace is mainly used for the sintering and thermal treatment of hard alloy products. In operation, the sintering process is accomplished under vacuum state. The product features its precise temperature control, even inner temperature, non-protective gas operation, high performance and stable quality. This sintering equipment is suitable for hard alloy industry. Place of Origin Hunan, China (Mainland) Brand Name GaoXin Model Number GXZK-50 Usage Sintering Furnace Type Other Condition New Type Furnace Processing Type Machining Equipment .
1.Evenness and precision of control. 2.The gases can be hydrogen, ammonia or air. The blue tungsten oxide furnace, also called turning tube furnace, is a must device in the powder metallurgy industry (especially the metallurgy of tungsten and molybdenum), whose main use is to turn the semifinished product apt (ammonium paratungstate) into blue tungsten oxide and molybdenum through the proper control of temperature, time, inside atmosphere and pressure in furnace. The pif-regulated control system, for the temperature control, consists of the thermal coupler, temperature controller and controllable silicon trigger and features its evenness and precision of control. The staying time of furnace materials can be set by changing the rotation speed and slant of the furnace tube on the basis of the process requirements. The gases in the furnace chamber can be customized as hydrogen, ammonia or air.
1. High-quality heat source Under common-pressure liquid, the oil transfer heating system can output hot oil of maximum 350 celsius degree for the heat user; our heat-conducting oil heating systems applied the fuji temperature control instrument and the intelligent self-tuning temperature control technology. The control precision is about ía 1 celsius degree and accurately control in the range of the used temperature; the main power for the heating used the solid-state modules non-contact switch circuit in order to adapt to the frequent switching and have no interference to the power supply. Dry combustion can also be avoided. The hot oil cooling system can be designed according to the end user requirement, so that it can satisfy the process requirement of rapid cooling after heating up; 2. To save energy and low operating costs Heat-conducting oil heating system is the liquid phase closed cycle. The temperature difference between the output oil temperature and the return oil temperature is 20-30 celsius degree, that is only to heat a temperature difference of 20-30 celsius degree can the working temperature be reached. Meanwhile, no water treatment equipment is required for this device. No lose of steam running, steam reeking, steam dropping and steam leakage as the steam boiler. The utilization ratio of heat is very high. It can save about 30% energy compared with the steam boiler. 3. Low equipment investment Due to the reason that the system of the heat-conducting is simple, no water treatment equipment and more auxiliary equipment , low pressure bore by the boilers etc., the investment for the whole system is comparatively low; 4. Safety Because the system only withstands the pump pressure and there is no explosion risk for the heat conduction oil heating system, it is more secured; 5. Environmental protection The environmental effect of the organic heat carrier heating system is mainly reflected in the minimal fume emissions, no sewage pollution and no thermal pollution;
Vacuum cleaning furnace was used for cleaning the ordinary spinning plates, abnormal shaped spinneret plate, fine denier board, component housing for the terylene, polypropylene fiber, non-woven fabrics etc. Of the chemical fiber cleaning industry. It can also be used for washing the filter elements. It applied the principle that the synthetic polymer decomposed under the condition that isolating from the air in the vacuum state and the high temperature around 500 celsius degree. It owns the advantages of little environmental pollution, perfect cleaning of the spinning board, smoothed nozzle hole, extension the life of the spinneret board as well as shorter working hours, energy saving, easy to operate, good washing effect and high degree of automation etc. It is the updated products for replacing the triethylene glycol cleaning furnace and salt-bath furnace. Vacuum cleaning furnace is also applicable to the cleaning of the die-head and filter elements in the plastic industry.
We have the exclusive patent products, research and produce the semiconductor key equipments. The outstanding advantage of its production is to take some techniques such as the plc auto-controlling system, independent innovating hot zone, magnetism liquid seal, power factor compensation and harmonic wave restraining and so on, which realizes the constant temperature of the hot zone, meets steady, continuous, high-efficiency, auto-controlling, non-dislocation and low oxygen and carbon requirements for dia.6inch--dia.8inch single silicon ingot. The products are high-efficiency, economize on energy, environmental protection and automatization , has the perfect foreground. Cz-80a, cz-90ai, cz-110
We have the exclusive patent products, research and produce the semiconductor key equipments. The outstanding advantage of its production is to take some techniques such as the plc auto-controlling system, independent innovating hot zone, magnetism liquid seal, power factor compensation and harmonic wave restraining and so on, which realizes the constant temperature of the hot zone, meets steady, continuous, high-efficiency, auto-controlling, non-dislocation and low oxygen and carbon requirements for dia.6inch--dia.8inch single silicon ingot. The products are high-efficiency, economize on energy, environmental protection and automatization , has the perfect foreground. Cz-80a Cz-90ai Cz-110
Medium frequency furnace.
All furnace features 1. 30 Segment Programmable Temperature Controller 2. High quality MoSi2 or SiC Heating Elements. 3. Double Shell Design to low outside Furnace Temperature
Silicon crystal growing furnace Silicon crystal growing furnace for solar cell, using graphite heater, melt poly silicon in inert gases. Thun using vertical pulling method to produce high qulity single crystal silicon for solar cell and other electronic products. The system using 18 quartz crucible with 70kg melt stock or 20 quartz crucible with 100kg melt stock produces 6 or 8 single crystal silicon Standard export packing
Electric arc furnace We supply vaious capacity from 3 t to 100t/h electric arc furnace. Electrica arc furnaces have many function and suitable for; [1] melting of scraps; [2] temperature control of liquid steel; [3] adjustment & control of chemical composition of liquid steel; [4] adding fluxes for desulphurization, de-phosphorization and de-oxygen to liquid steel; [5] pre-reduction via de-oxygen for reservation of chromes; [6] to guarantee the production beat coordination of eaf with the ladle furnace, vacuum tank degassing plant and argon-oxygen decarburization plant as well as the continuous casting machine, etc. So as to realize continuous casting by multi-heats. For electric arc furnace, we can provide complete turn-key project, including installation, commissioning.
Which mainly use for burning the pig residual hair,the detail data as following: 1)- Material:Stainless steel 2)- Technical parameters: Work pressure: 0.3-0.5 MPA Liquefied gas Consumption: 0.3-0.5 KG / Pig Capacity:300-400 pigs /hr Out size: 2300 1500 4300mm Weight:1800KG
Heaters for glass tempering furnace. Heaters of Northglass furnace 7kw,14kw.
Pusher Furnace, a representative equipment in the firing process, is designed to push the conveyor using the pusher to move the product. It is used for the firing process of various types of products and it shows excellent heat resistance, insulation efficiency and wear resistance against the conveyor. Designed as a tunnel type, Pusher Furnace implements continuity of automated production system and uniform production based on ambient per zone and temperature control.
Mesh Belt Type Furnace is designed to load the product on the mesh belt and make continuous production. It is used in various processes, including plastic working, firing, drying and degreasing, for a variety of production. Using the muffle, Mesh Belt Furnace offers stable ambient control, rapid heat-up time and radiating energy saving. It is designed to implement continuity of automated production system and uniform production based on ambient per zone and temperature control.
Batch Type Furnace can be comprised of several types, such as rack, roller or elevator, and pre-process product input and post-process product output is made in 1 cycle. Batch Furnace is used for plastic working, firing, drying and degreasing of various products. Unlike the continuous furnace, it can be installed in an independent location, with advantages of convenient layout and excellent price competitiveness.
Roller Hearth Kiln is a furnace that loads the product on the roller and make continuous production. It is used in various processes, including plastic working, firing, drying and degreasing, for a variety of production. It is designed to implement continuity of automated production system and show excellence in speed variation by roller running per zone and rapid heat-up capability.
All the raw material from China big steel mills, are unused steel products spare material and leftover material , no oil, no protective film, no impurities, which are high quality raw material for intermediate frequency furnace, 20 and 30 kg of small packaging are more suitable for small intermediate frequency furnace,and it can be directly converted into molten steel.
