Supply anchor chain, offshore mooring chain, stud link chain, mooring buoy chain, oil rig chain, kenter shackle, swivel shackle, anchor shackle We, jingjiang top far international trading co., ltd(www.Chinatopfar.Com), can supply kinds of anchor chain, offshore mooring chain, stud link chain, mooring buoy chain, oil rig chain, kenter shackle, swivel shackle, anchor shackle as below: Diameter: 12.5mm-157mm Grade:am2 and am3 anchor chain for ship use; Orq, r3, r3s, r4, r4s and r5 offshore mooring chains. Certificate: abs, bv, ccs, cr, dnv, gl, kr, lr, nk, rina, rmrs.
1. nominal size: Nominal diameter of the round section steel wire or bar from which the chain is made. 2. material diameter: Diameter of the material in the chain link as measured. 3. weld diameter: Diameter at the weld as measured. 4. length dimensionally affected by welding: Length on either side of the center of the link, affected by welding. 5. pitch: Internal length of a link as measured. 6. manufacturing proof force(MPF) of chain: Force to which during manufacture the whole of the chain is subjected. 7. breaking force( BF): Maximum force which the chain withstands during the course of a static tensile test to destruction. 8. working load limit (WLL) of chain: Maximum mass which the chain hanging vertically is authorized to sustain in general lifting service. 9. total ultimate elongation (A): Total extension at the point of fracture of the chain expressed as a percentage of the internal length of the test sample. 10. processing: Any treatment of the chain subsequent to welding, for example, heat treatment, polishing or dimension calibration. 11. lot: Specified quantity from which test sample(s) is/are selected. 12. competent person: A designated person, suitably trained qualified by knowledge and practical experience, and with the necessary instructions to enable the required examination to be carried out.
Definitions to European standard EN 818-7 For the purposes of this Part of EN 818,the following definitions apply: 1. nominal size: Nominal diameter of the round section steel wire or bar from which the chain is made. 2. material diameter: Diameter of the material in the chain link as measured. 3. weld diameter: Diameter at the weld as measured. 4. length dimensionally affected by welding: Length on either side of the center of the link, affected by welding. 5. pitch: Internal length of a link as measured. 6. manufacturing proof force(MPF) of chain: Force to which during manufacture the whole of the chain is subjected. 7. breaking force( BF): Maximum force which the chain withstands during the course of a static tensile test to destruction. 8. working load limit (WLL) of chain: Maximum mass which the chain hanging vertically is authorized to sustain in general lifting service. 9. total ultimate elongation (A): Total extension at the point of fracture of the chain expressed as a percentage of the internal length of the test sample. 10. processing: Any treatment of the chain subsequent to welding, for example, heat treatment, polishing or dimension calibration. 11. lot: Specified quantity from which test sample(s) is/are selected. 12. competent person: A designated person, suitably trained qualified by knowledge and practical experience, and with the necessary instructions to enable the required examination to be carried out.
Chain Diameter: 1/2~2 inches Proof load of Grade1: 165.60~460.00KN Breaking load of Grade1: 333.00~926.09KN Proof load of Grade2: 234.20~648.80KN Breaking load of Grade2: 467.50~1239.60KN Approx. Mass(27.5m): 93.50~1650.00KG
Place of Origin: Zhejiang, China (Mainland) Brand Name: WOKAITE Model Number: SSDHL01-01 Usage: Construction Hoist Power Source: Electric Sling Type: Chain Maximum Lifting Weight: 1.25ton Maximum Lifting Height: 100m Lift Speed: 6.6 meter/min Certification: CE & ISO & SGS Warranty: One Year After-sales Service Provided:Engineers available to service machinery overseas Capacity: 1 ton Test load: 1.25 ton Standard Lifting Height: 3 meter Lifting Speed: 66 m/min Lifting Motor: 3.0 kW Rotation speed: 1440 r/min Insulation grade: F Travelling Speed: 10/20 m/min Travelling Motor: 0.75 kW Control Voltage: 24V/36V/48V Working Voltage: 3P/ 200V-600V Working Level: M4/1Am SupplyAbility: 10000Set/Sets per Month Customize Available Packaging Detailsï¼?seaworthy carton + pallet Portï¼?Shanghai , Ningbo , Guangzhou or as request Lead Time :within 15 days after order confirmation Business Type: Exporter,Manufacturer, Wholesaler,Supplier Main Products: CRANES,ELECTRIC HOIST,MANUAL HOIST,WINCHES,MATERIAL HANDLING EQUIPMENT Total Annual Revenue: US$1 Million - US$2.5 Million Top 3 Markets: South America 25.00% North America 15.00% Africa 15.00%
Centre Guide silent chain One of the popular options to guide Rongda Conveyor chain is Centre Guide ,The double guide link plates in the centre of the chain fit into the groove in the centre of the sprocket teeth ,keeping the chain aligned during operation (Single guide link chains are also available when required). Centre Guide chains are available in a variety of standard widths from 100mm (4 inch) up to 400mm (16 inch).Specials can be made to suit customers individual requirements from 12mm (1/2 inch) wide. Centre Guide chain is available in Link and Spacer,All Link ,Double Assembly and Special Assembly versions ;additional information on these designs of chain can be found throughout this catalogue. Advantages of RongDa Silent chain Silent conveying chains provide a smooth,durable,flat conveying surface that operates with less vibration and velocity variation than other conveying products.Chains are manufactured from hardened steed components.making them long lasting and tolerant of elevated temperatures. They are available in a variety of standard widths and constructions or can be easily built to suit a specific application. Linked and pin with a special treatment,so it has highly wearable and strength to pull and can provide more stable use effects and long usage life,all of the silent can meet the International standard. We also can produce it from 304/316 as your special requirement and produce any type of these products as your demand. The width of silent chain can from 50mm to 500mm. Special Recommendation:Two pin silent chain can provide better use effects and longer usage life than single pin.And with protection plate can offer more safety protection for the product.
laura at liftpand.com 1.The hoist is designed accordance with European standard EN13157 for hand-operated lifting equipment safety. 2.Every chain block in our factory has the safety coefficient at least 4:1.It's tested to withstand 1500 cycles with 110% of the rated capacity. 3.Thick steel gear side cover and hand wheel cover protect against external shocks and rainwater or dust. It ensures durability and smooth operation. 4.Double pawl and double guide roller enhance safety and reliability. 5.Three sealed ball bearings increases mechnical efficiency. 6.Heat-treated forging hooks will deform slowly rather than break when overload. Location points on hooks remind to change hooks to avoid danger. 7.20CrMnTi gears in high efficiency and durability. 8.Heat treated G80 load chain meet EN818-7 tensile testing standard.
Flash Butt welded Anchor Chain cables. 1. Type: Studlink Chain,which is the most popular,is used by the shipping and oil industries. 2. Size: from 12.5mm to 162mm 3. Standard: Lastest version of ISO1704, GB/T 549, JIS F3303, GOST 228, IACS, OCIMF and API 4. Certification: ISO9001, LR, ABS, DNV, GL, BV, NK, KR, CCS, RINA, CCS, RMRS... 5.Material: Special Quality Steel, Extra Special Quality Steel 6.Surface: Black Painted or Galvanised Our Company Qingdao Aohai Anchor Chain Co., Ltd. was founded in 2009, total investment nearly one billion, intending to be the most modernized product line in China, manufacturing welded anchor chain, offshore mooring chain and steel structured anchor. We mainly manufacture marine anchor chain from 22mm to 182mm, offshore mooring chain, ship anchor chain, stud link anchor chain, studless anchor chain, galvanized anchor chain, offshore chain, buoy chain, marking chain, buoy chain, chafing chain, steel structured anchor, flipper delta anchor, delta anchor, stevpris anchor, MK5 anchor, MK6 anchor, spek anchor, hall anchor, admiralty anchor, AC-14 HHP anchor, aquaculture anchor, steel structured buoy, mooring buoy, shipboard fittings and so on, we can supply with CCS, BV, LR, ABS, KR, NK, DNV-GL and other certificate from 11 class societies and admiralty approval. Currently, first phase project, total investment nearly half billion mainly possesses 5#, 7#, 9#, 11# anchor chain manufacturing machine, tempering machine, load test machine, cutting machine, property testing machine and shot blasting machine. Computer aided technology and network information technology is widely used in our factory, we established computer management information system, which allocate resources properly and improve the production efficiency. Our Advantage we keep Anchor chain and accessories from 22~162mm Triplates and all accessories required by mooring systems in stock for immediate delivery. Stockless Anchor, offshore Anchor, Steel welded anchor from 20kg to 25Tons Which can offer our customers easy and flexible delivery. Advantage manufacturing facilities: Advanced program-controlled chain production line; Automatic heat treatment machine; Automatic shot blasting machine. Our Certificate Thirty Party Certificate: Lloyd's Rigister of Shipping (LR) American Bureau of Shipping (ABS) Det Norske Veritas (DNV) Germanischer Lloyd (GL) Bureau Veritas (BV) Korean Register of Shipping (KR) Nippon Kaiji Kyokai (NK) Registro Ltaliano Navale Group (RINA) China Classification Society (CCS) Russian Maritime Register of Shipping (RMRS) Indian Register of Shipping (IRS) Croatian Register of Shipping (CSR) ... ...
AC-14 HHP Anchor is widely used. There are two types, not balanced and fully balanced type. Certification: LR, BV, ABS, DNV-GL, KR, NK, CCS, RMRS... certificate available Surface treatment: sandblasting to S2.5 + one layer of shop primer; special paint available on request About Our Company: Our main business is manufacturing and sales of anchors, deck outfittings and other casted products. Advanced manufacturing facility, quality control system and inspection measures assure us supply you with high quality products. Our main products: Anchors -- All kind of Stock Anchor and Stockless Anchor, AC-14 HHP Anchor, Danforth Anchor, Delta Anchor, Stevpris Anchor..., with any class cert Deck Outfittings -- Stoppers, Fairleads, Bollards and Chocks..., with most class cert Bollards and front pannels for quay fenders All class certificate available LR, ABS, DNV-GL, BV, NK, KR, CCS, RINA, RMRS, IRS, CS, CRS, ZC...
Aohai Anchor Chain A leading anchor and anchor chain manufactuer With IACS approval and keep some size from 22~122mm in stock can delivery in 1~5 days any inquiry please feel free to contact us
Anchor Chain Marien Anchor Chain Anchor Chain manufactuer Anchor Chain factory Anchor Chain with stock Anchor Chain with KR LR BV NK CCS ABS DNV-GL RMRS RINA IACL certificate. Aohai Anchor Chain A leading anchor and anchor chain manufactuer factory With IACS approval and keep some size from 22~122mm in stock can delivery in 1~5 days any inquiry please feel free to contact us
AOHAI ANCHOR CHAIN A LEADING CHINESE ANCHOR CHAIN MANUFACTUER WITH ABS BV NK LR KR DNV-GL CCS RMRS RINA IACS cert. we can produce ISO 1704 flust butt welded anchor chain from 22mm to 182mm and keep some anchor chain in stock can delivery in 1~5 days.
Manufacturers of Escalator Step Chain to industry standards and customer specifications. Shipped Worldwide
Straight run chain These chains are wide used in food, beverage, etc industrial material handling, they have low friction, low maintenance cost, low price and high efficiency.
Flat top chain These products are wide used in food, beverage, packaging, pharmaceutical, printing, power transmission and related product processing industries. They have low friction, low noise, low maintenance cost and endurable , competitive prices. Standard export packing
Rated load:0.5-20ton Standard lift:3m Test load:0.75-30ton Diamter of load chain:6-10mm No. Of load chain:1-8 1 pc in a carton Nw:9.5-150kg Packing size: customized
1.Structure : welded chain 2. Surface treatment: electrical galvanized, hot dipped galvanized, zinc plated Link chain with zinc plated and self color is ok or according to your requirement Size:6mm to 42mm. Din 766 chain.Packing : gunny bag, steel drum, wooden case.
1) Steel link chain 2) Material: alloy steel, galvanized, stainless steel(304, 316); 3) Diameter: 2mm-32mm; 4) Standard:DIN763, DIN766, DIN764, DIN5685,Australian standard link chain,DIN5687(G80),NACM90, etc; 5) Packing:plastic spools or steel drum
6x18, 7x21, 9x27, 10x30, 13x39, 16x48, 18x54, 20x60, 22x66, 26x78, 32x96 6x18, 7x21, 9x27, 10x30, 13x39, 16x48, 18x54, 20x60, 22x66, 26x78, 32x96
Assembled lifting chain slings can be supplied with many types, such as single-leg and multiple-legs, it¡¯s widely used for features of wear resistance, high temperature resistance, corrosion resistance, flexibility and low ductility. It will not elongate after being loaded and stressed and can assure a long service life. A variety of assembly type can improve work efficiency and reduce costs.