Monoblock burner for all types of heating application like boiler, oven, hot air generator, dryer, furnace, melting furnace, heat treatment. Standard.
, food industry: Rice biscuit (rice cookies covered with snow-like sugar )assembly line, grilled chicken, biscuit, egg roll, Roasting shredded squid oven, oven for roast duck, smokeless oven, griddle, middle eastern oven, hot pot Oven, roasting pachyrhizus oven, snack car, soup oven, cooking assembly line, infra-red gas baking pan, Deep-fry assembly line, water-removing machine, baking, ec. , painting industry: Liquifized or powered painting assembly line, warm-up, preliminary treatment of heating, desiccating wood, Galvanization drying assembly line, phosphatization drying assembly line , fibre industry: Carpet latex dryer, dyeing dryer, printing dryer, textile dryer, indestrial clothes dryer, latex gloves drying Assembly line , glass and ceramics industry: Enamel firing dryer, glass oven, heat-setting machine, mould drying, fritting, parching , paper industry: All kinds of paper dry lines and auxiliary drying heat wall , farming and animal husbandry: Heating of barton, heating of crops, grain dryer.
Horizontal Gas/Oil fired industrial steam boiler features: •Adopt numerical control, include Automatic Mode, Manual Mode, Timing Mode, Error Recording, password protection,etc. •Be provided with automatic blow down system (Independent patent technology) •Automatic Scale alarm(Independent patent technology), overpressure protection devices ensure the safety of the boiler •Easy maintenance, front door of smoke box adopt articulated joint which is convenient to be open, the cleaning of close-by flue tubes become easy too. •Safe and reliable, before leave the factory, all the boiler have to pass series of strict tests to ensure the safety and reliability of combustion and auto control devices Parameter: Type Mode Rated evaporation (t/h) Rated pressure (Mpa) Rated evaporation temperature (°C) Diesel consumption (Kg/H) Natural gas consumption (Nm3/h) Weight (T) horizontal central reverse flame WNS0.5-0.8-YQ 0.5 0.8 175 34.4 41.1 3.735 WNS0.7-0.8-YQ 0.7 48.2 57.5 5.502 WNS1.0-1.0-YQ 1.0 68.8 82.1 5.68 WNS2.0-1.0-YQ 2.0 1.0 184 137 164.3 8.255 WNS1.5-1.0-YQ 1.5 103 123.15 9.885 WNS2-1.0-YQ 2.0 137 164.3 11.14 horizontal three Pass WNS1.5-1.25-YQ 1.5 103 123.15 9.689 WNS2.0-1.25-YQ 2.0 137 164.3 11.6 WNS2.5-1.25-YQ 2.5 1.25 194 172 205.5 15.0 WNS3.0-1.25-YQ 3.0 206 246.3 17.12. Standard pickings( well wrapped in plastic clothes packing with wooden case).
Our steam pressure reducing station are pre-fabricated manufactured ready to install units for steam system management. The pre-assembled steam pressure reducing stations are individually sized to meet end-user's specific needs. lnlet and outlet piping & valve are sized as per best engineering practices. Each unit is custom engineered and designed to meet specific system requirements. All upstream & down stream pipe work & fittings are adequately sized to ensure that only the required pressure drop occurs across the control valve itself.
This is basically A heat transfer equipment to heat air prior to entering in the furnace with a primary object to increase thermal efficiency of hot flue gases are passed through the tubes and air outside the tubes. The heat of the boiler flue gas is recovered in APH to increase the air temperature & the thermal efficiency is increased. Another advantage is that the flue gas is sent to chimney stack at lower temperature allowing simplified design of ducting & flue gas stack. It also allow controls the temperature of flue gas leaving the stack to meet emissions regulation / pollution control. Salient Features: Easy installation Low maintenance cost Robust construction Compact High efficiency
Industrial Hot Water Generators are vented systems provide temperatures up to 98°C. Pressurized systems are essentially closed loop required for indirect heating and provide temperatures up to 150°C without boiling or steam formation. The system is suitable to heat water up to 250°C with combustion of any solid fuels like wood, coal, bagasse, corn cobs, agrowaste, lignite, petcoke, etc. System is designed with all safeties & controls well defined for safe operation without lesser maintenance. Salient Features: Heat transfer efficiency Long thermic fluid life Corrosion free No scale problems No boiler regulation High temperature Abrasion resistant Easy to use Capacity:600,000 to 10,000,000 kcal/hr. Temperature:upto 200°C Fuel:Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust / Bagasse / etc
Vertical Four Pass Thermic Fluid Heater is combustion grate that gives you an assurance of the rated output on any solid fuels like coal, wood, lignite, husk, briquettes, pet coke, saw dust, bagasse, etc. without compromising on performance & efficiency. This reduces downtime leading to further increase in profitability. Every solid fuel has different physical and chemical properties which influences the design and performance of the furnace in Thermal Fluid Heater. Different combustion systems are shown in above diagrams. Low grade fuels are best handled using FBC technology to give good results. Thermal's unique design for efficient combustion suits different solid fuels like coal, lignite, wood, husk, pet coke, bagasse and biomass fuels resulting in to low operating cost, trouble free operation and lesser maintenance husk, agis best suited for some fuels with high ash content like low grade coal, paddy ro wastes etc. FBC technology ensures complete combustion, helps homogeneous mixing of fuel, maintains uniform bed temperature and leaves low un-burnt fuel guaranteeing 5 to 7% higher efficiency than any other combustion system.Options of In-Bed Tubes in Furnace is also available to control bed temperature & system performance. Fluidized Bed Combustion Technology is best suited for fuels like low grade coal, imported coal, paddy husk, petcock, etc with Auto feeding system of Over bed & Under bed into Furnace. Salient Features: Multi Fuel Fired System Cost Efficient Unit Also with Latest FBC System Automatic Firing of Solid Fuel as similar to Oil & Gas Capacity:600,000 to 10,000,000 kcal/hr. Temperature:upto 400©C Fuel:Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust / Bagasse / Palm Oil Extracts / etc
A unique design of the pre-furnace consists of lateral wall made of finned tube connected to the boiler body through headers. Salient Features: Complete gas-tight construction. Greater absorption of radiant heat. Fast water circulation resulting in accelerated start up and better boiler response to load fluctuations. Designed to give full load efficiency upto 80%. Optional FBC System for Capacity above 5000 kg./hr. for Automatic Firing. Capacity:1000 kg./hr. to 15000 kg./hr. Pressure:10kg./cm2 to 35 kg./cm2 Fuel:Coal / Wood / Lignite / Paddy Husk / Petcock / Saw Dust / Bagasse / Palm Oil Extracts / etc.
3-PASS FULLY WET BACK STEAM BOILER Thermal-Max Steam Boiler Smoke tube type system boiler with three pass fully wet back design, suitable for cal / agro waste / oil / gas fuel. Salient Features: Factory-assembled horizontal package boiler. Less site work & quick commissioning Suitable for coal, wood & briquetted fuel. Manual firing - less complexity. Large integral furnace - minimum heat loss. High turn-down ration. End to end visibility of tubes. Easy access for inspection & cleaning. Quick and easy ash removal. Low excess air burners, imported / indigenous. Capacity:Oil Fired - 500 kg./hr. to 8000 kg./hr. Solid Fuel Fired - 500 kg./hr. to 6000 kg./hr. Pressure:10 kg./cm2 to 35kg./cm2
Fully Automatioc Coil Type Boiler Fully automatic, instant steam generating range of boilers designed for safe and reliable operations. Easy to install and commission, these time-tested boilers require very little maintenance. It features a specially designed furnace and combustion system to burn difficult heavy oils and offers fuel flexibility between light and heavy oils to help respond to fluctuating fuel prices. Salient Features: High Efficiency. Large Steam & Water Volumes. Less Maintenance Unique patented membrane design Built-in heat recovery device Membrane design allows large tube diameter for coil enabling better steam dryness, less frequent de-scaling, longer coil life and minimum downtime Unique economiser - optimiser design ensures maximum heat recovery without possibility of feed water pump failure due to boiling/ vapour causing cavitations and pump failure Unique circulation burner design prevents leakage and eliminates fire hazard Ceramic wool refractory allows fast cooling of top plate and easy maintenance Easy access to all parts requiring maintenance. Capacity:500 kg./hr. to 850 kg./hr. Pressure:10 kg/cm2 to 20kg/cm2 Fuel:Coal / Wood / Lignite / Petcock
Continuous Coconut Shell Carbonization Furnace This machine is equipped with:Auto-feeding Conveyor, Biomass Gasifier equipment, Dust-Removal Device, Gas cleaner system, PLC controlled and manual / automatic dual- control System, Cooling and Discharging conveyor, Carbonization Furnace and other equipments. While Carbonization of the raw material inside of the Carbonization Furnace (like coconut shell, sawdust, Palm shell, rice husk, straw, wood scrap etc.), the produced Flue Gas is recirculated in pipeline and is fed back to Heating System after purification, becomes combustible gas (carbon monoxide, methane, ethane). When the temperature reached, Carbonization furnace starting carbonizing the raw materials fed, producing the flue gases, which becomes a combustible gas after spray pour, cooling purification by the cooling purification system, to continue the carbonization Process, then Gasifier stops working or set on the minimal use. Temperature is been regulated and controlled by control system. The Feeding of the Raw Material is also regulated for the Qualified End Product. Based on the requirement of the Plant ie output of the finished Product, we can deploy a set of Furnace or Bank of furnace to yield the desired production quantum. Plant Capacities : 300 kg/hr to 2000 Kgs/hr continuous type.
Rotary Hearth Furnace Based Pig Iron This is the Latest Technology to Produce the Pig Iron or MS Iron out of the Iron Ore Fines and Non-coking Coal. In this Technology, the Coal Consumption is the minimal as compared to the Tunnel Kiln Process or Rotary Kiln Process. Through RHF, either Pig Iron (Fe=96-97% C=3.0-4.0%) or MS Steel (Fe=99% C=0.2% Mn=0.3% etc) or HBI (Hot Briquetted Iron) (Fe=92% C=0.25%) can be made, depending upon the requirement. The entire time for the Reduction, Melting and Product Out will be around 45 min, so the larger capacity of the Plants can be made. This process is also Lowest Space Consuming Plant. The Best Part of this Technology is that we can Product the Ferro Alloys too, like Ferro Nickel (Fe-Ni), Ferro Chrome (Fe-Cr) or Ferro Vanadium (Fe-V) etc from the same Plant, by implementing different Parameters of Operations. We can Control the Low Carbon Ferro Chrome, MS Steel and many more.
Coke less Blast Furnace This Technology is the most efficient for the Existing Blast Furnace Plants to Produce the Pig Iron and that too on the Non-coking Coal instead of the Expensive Metallurgical Coal. The most economical way to produce the Pig Iron from the Coal, but the Limitation is there, that is, it works well with MBFs (Mini Blast Furnace 60-80m3) only. The Larger Capacity Blast Furnace are yet to be optimized and adjusted accordingly.
Used rail scrap R50 R65, HMS 1/2, copper concentrate, copper cathode, copper wire scrap.Consultants
A burner made with CI body, has a Primary and Secondary air ports, supplied wit Air Butterfly valves, Burner block, Precise control oil Valve (SOV) as a Package. Burner is used in the applications, where Fuel will be Diesel, LPG, Natural Gas, Producer gas etc., This burner is specially designed to avoid localized Heating. It is designed to give 100% Combustion efficiency even with High carbon oil. Advantages : Fuel Efficient by Better atomization Uniform heat transfer, 10% savings will be possible by interchanging with any make burner. Optional Accessories : Preheated combustion air upto temperature of 350?C (Max) for fuel saving upto 40%.
PP spun bond nonwoven fabrics with various colors from 20-150 gsm, BOPP laminated PP Nonwoven fabrics, PP nonwoven carry bags, PP Nonwoven shopping bags, PP Nonwoven rice bags and PP Nonwoven printed Box bags.Manufacturers and exporters, importer
Wheat flour, corrugated paper machines, kitchen ware, agriculture products, grains, spices, hardware, namkeen, chocolates, vegetables, fruits.Wholesaler, trader, importer and exporter, logistics services, transporter
Sodium bentonite, plastics resins, plastics sheets and injection moulded parts for auto, building supplies & industrial use.