Features and values 1. A wide range of application 2. Unique hammer attachment system for increasing security 3. Easy to operate and maintain 4. Wide range of hammer and liner materials, including manganese, martensitic, high chrome and ceramic insert 5. It is widely used in quarry, mining, construction, road building, highway and railway construction, Metallurgy and so on.
1. Features: Large crushing rate, even grain size of products; simple structure, reliable working, easy repair/maintainance, and low cost for operating. 2. The composition: A. The vibrating feeding device B. The motor of feeding device C. The feeding opening of the feeding device D. Jaw crusher E. The motor of Jaw crusher F. Standard-type belt device G. The extending section of belt device.
Jaw crusher is one of the most common crushing equipment. It is mainly applied in crushing the material with the compressive strength under 320mpa. This jaw crusher is usually used in the field of mining, metallurgy, road & railway construction, water conservancy, chemical industry and so on. The jaw crusher of medium and large size designed and manufactured by our company have reached the advanced level with the features of high crushing ratio, high capacity, uniformed product size, simple structure, reliable operation, easy maintenance and low operation cost. Pe venient spare part replacement and easy maintenance. 6.Energy-saving: the stand-alone can reduce the energy consumption by 15-30% while the whole system can save energy by double. 7.Large discharge open range, which can meet different customers' requirements. 8.Low noise and dust pollution.
Jaw crusher is based on years of product development. The continuous improvement and refinement has made them the preferred jaw crusher among professionals and our customers. Pe series jaw crusher is suitable for even hardest rock and recycle materials. In stone crushing plant, for example, our jaw crushers are able to work continuously with reliable quality and crushing economy. Our jaw crusher machine is suitable for both stationary and mobile crushing process. Vipeak jaw crushers are primarily used for reducing various kinds of stones and lump materials into medium-grained gravel. The materials to be crushed can be hard, medium-hard and soft minerals whose compressive strength should be not more than 320 mpa. Our jaw crushers adopt v-shape inlet, resulting in higher crushing efficiency. Currently, these products become the preferred primary crushing equipment in the production of stone. They are widely used in many industries, such as mining, metallurgy, building material, railway, water conservancy, chemicals, and so on. Jaw crusher performance and features 1) simple structure, easy maintenance 2) stable performance 3) flexible capacity 4) over loading protection 5) stable performance 6) stable performance 7) even final particles and high crushing ratio 8) high efficiency and low operation cost 9) alternative ordinary and hydraulic types Jaw crusher working principle This jaw crusher uses motor as its power. Through the motor's wheels, the eccentric shaft is driven by the triangle belt and slot wheel to make the movable jaw plate move by a regulated track. Therefore, the materials in the crushing cavity composed of fixed jaw plate, movable jaw plate and side-lee board can be crushed and discharged through the discharging opening.
Jaw crusher Very feature of these machines has been carefully designed to provide superior quality and performance. They are widely used for crushing various materials like stones, granites, traprocks, cokes, coals, manganese ores, iron ores, emeries, fused aluminums, oxides, fused calcium carbides, lime stones, quartzite and alloys.
Crushers & other related facilities Bulk or open-top
Features: 1. The crushing cavit is deep and without dead zone, which can increase the feeding capacity and capacity; 2. It has a big crushing ratio and even grain shape. 3. The gasket type inlet size makes flexible adjustment posible, and it¡¯s reliable, conveinent, and with a big adjustment range, which can greatly enhance the flexibility of the equipments. 4. The lubrication system is safe and reliable, and it¡¯s quite convinient to change components and there will be less maintenance needed. 5. It has a simple structure, and is quite stable and low in operation cost. 6. The equipment is energy saving: 15%-30% energy can be saved for each single plate, more than twice energy will be saved for the whole system; 7. The size of outlect is quite adjustable, which can meet requirements of different customers. 8. Low noise, less dust; 9. Simple structure, convinient to repair; stable performance, low operation cost; big crushing ratio. Technical parameter of jaw crusher : Mm to inch conversion: 25.4millimeters=1 inch Model max. Feeding Size (mm) discharge Size (mm) capacity (t/h) motor Power (kw) overall Dimensions (mm) weight (t) Pe400¡Á600 350 40-100 15-60 30 1700¡Á1732¡Á1653 6.5 Pe500¡Á750 425 50-100 50-100 55 2035¡Á1921¡Á2000 10.3 Pe600¡Á900 480 65-160 60-130 75 2290¡Á2206¡Á2370 16.5 Pe750¡Á1060 630 80-140 80-180 110 2620¡Á2302¡Á3110 29 Pe900¡Á1200 750 95-165 140-260 110 3789¡Á2826¡Á3025 54.5 Pe1000¡Á1200 850 195-265 315-550 110 3335¡Á3182¡Á3025 57 Pe1200¡Á1500 1020 150-300 400-800 160-220 4200¡Á3750¡Á3820 100.9
1. All kinds of model available 2. Stable and reliable operation 3. High reduction ratio 4. Uniform-sized finished products 5. Easy to maintain 6. Low operating cost 7.Deep crushing chamber 8.Wide size range of discharging opening 9. The machine has a better performance with the hydraulic coupling.
Crusher, jaw crusher, impact crusher, spring crusher.
The hammer head is made of AMC composite material which is at international level and is developed by our company independently. The life of super hammer head branded as "Big Gold Teeth" is 50-150% longer than that of hammer made from Mn18Cr2MoNbRe. The reconstruction of crushing cavity with our patent of "stone strike stone" greatly increases the self-breakup rate of stones, which efficiently reduces the load of grate-shoe and hammer head. The technology of WHM two-step super hard surface interspersed welding is introduced for the rotor. The life of weld beadis over two times than that ordinary anti-abrasion welding rads. The main shaft is made of military gun steel with high strength the steel is made by means of vacuum double refining, whose strength is 4-5 times higher than that of ordinary shaft. New design of grate-shoe. The shones flow smoothly and stably. The size of stone is fine and even. The life of wall plate is long. Features Stones stricken by stones crushing cavity Hammer head is wearable Intensity of principal axis is higher Discharging granularity is fine and equality Easy maintenance Relialbe operation.
Cone crusher is widely used in metallurgical industry, building materials industry, construction industry, chemical industry and silicate industry, applicable to crush various kinds of ores and rocks of medium or above medium hardness, and cone crusher is of big crushing ratio, high efficiency, large capacity, low cost, easy adjustment, and use economically, etc. The reasonable part selection and structural design extend crushers' usage life, and the final products of uniform particle size reduce the cycle load; the medium to large-sized crusher, adopts the hydraulic clear-cavity system, reduces downtime, and various types of crusher cavity to better adapt to user needs.
Capacity:3-45t/h Feeding size:
Improving the sand quality mostly, washing stone powder and residual away from the mixed sands producted by sand making machine.
This sort of elevator has few requirement for the kind, feature and sizes of materials , even can elevate material of abrade and high temperature material with temperature less than 250 degrees.The advanced designing principle guarantees the reliable operation of the complete machine.Model:d450 capacity(t/h):69.5/48.0 weight of elevator and chain per meter(kg/m):21.30 belt width(mm):500 belt layer:5 speed(m/s):1.25 n(t/min):37.5 max. Size(mm):55
MODEL Max. Feed Size (mm) Discharge Size (mm) Capacity (t/h) Motor power (KW) PE-600X900 520mm 65-130 50-150 75
It features in: 1 firm structure, stable performance, large capacity, even producing granularity 2 with the increase of production, our jaw crusher can greatly reduce the operating costs. 3 convenient maintenance and economical running expense. 4 the large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity. The jaw has a smaller discharge setting, allowing for a higher degree of flexibility with relative equipment. Positive setting adjustment is convenient. Standard
The stone production line is composed of vibrating feeder, jaw crusher, impact crusher, vibrating sieve, belt conveyor and computer controlling board; its design output veries from 50 tons to 500tons per hour. In order to meet the needs of different clients, cone crusher and dust collecting equipment can be added to the prodution line. It can be used in industry like hydroelectricity, building materials, express way, city construction to operate the aggregate of hard limestone, granite, pebble, slag of metallurgy and man-made sand. We can combine different model of machines in the production line according to different technical process. Brief introduction of the stone production line Big block of stone is evenly conveyed to jaw crusher by vibrating feeder via silo for primary crushing. After primary crushing, the stone is sent to impact crusher by belt conveyor for secondary crushing. Then the stone is tronsported to vibrating sieve for screening, thus the stone can be classified into several groups depending on the size. The stone with a necessary size will be sent by belt conveyor to the palce where finished product is piled; otherwise, the stone will be conveyed by belt conveyor to the impact crusher for another crushing, thus a circular production process is formed. Introduction of stone production line performance This production line is highly automatic, except the turning on, turning off and daily maintenance of the equipments no other mannual operations are needed. It enjoys the advantages like: high efficiency, low cost, high throughput, high profit, evenly-sized and good-shaped finished product, meeting the national requirements of rapid need of raw materials.
Jaw crusher.
The features and benefits of jaw crusher: 1.Simple structure and reliable operation 2.Easy maintenance and low operating cost 3.The frame of jaw crusher is very firm due to removing welding residual stress. Export standard.
1. Mobile crusher application The mobile crusher (mobile crushing and screening plants) is applied to multistage crush large materials, and then screen the discharges according to their different specifications. The whole set plants is widely used to mine, building material, highway, rail way and hydropower industries, etc., finish crushing and screening operations at one time, produce required size and output for consumers. 2. Mobile crusher features and benefits ííthe mobile crusher (plants) has the advantage of reasonable matching, unobstructed discharge all line, reliable working, convenient operation, high efficiency and saving energy. Especially the mobility is very good, so it can extend with the raw material places or the construction place, and it can also make multiple matching, get to different product requirements. 3.Mobile crusher composition and working principle The mobile crusher (mobile crushing and screening plants) is composed of primary crushing and screening station and secondary one, belt conveyor, etc. Every crushing station is an independent working unit, they can respectively assume their different responsibility, and the belt conveyer is responsible for material transmitting and piling up between each crushing station.