High Voltage Porcelain Insulators Suppliers and Manufacturers

The safety boots can be used in pharmaceutical manufacturing and general industry along with industrial sites product. Every year, harmful chemical exposure accidents increase steadily, even in everyday industrial sites easily because it is an accident that causes significant damage, the "safety boots" product can be prevented and kept safe in advance Product List: Chemical Rain Boots (R-2-49) - Anti-slip and anti-static function / Excellent abrasion resistance - Corrosion-resistant stainless steel and anti-slip performance level 1 products Insulated Rain Boots - Available in high voltage current (DC 750V, AC 600V-voltage below 7,000 V) - The inside and outside are made of natural rubber, easy to wash Anti-static safety - High-clean lightweight PU material with minimal fatigue - Ergonomically designed to reduce fatigue even for long hours of wear

Characteristics: Rated voltage: 3.6/3.7/3.8/3.85 V Standard discharge continuous current: 0.2C Maximum continuous discharge current: 0.5C Working temperature: Charging: 0-45 Discharge: -20~60 Finished product internal resistance:

Characteristics: Rated voltage: 3.2 V Working voltage: 3.0-3.3V Minimum discharge voltage: 2.0-2.8 V Maximum charging voltage: 3.60-3.65 V Volume energy density: 325 Wh/L Weight energy density:>90 Wh/kg Specific power: 200 W/kg Time durability:>10 years Cycle durability: 2750-12000 cycles Advantages: Higher safety Better service life and cycle life Environmental protection Fast charging Wide working temperature range Low energy density Application: Energy storage equipment Electric tools Light electric vehicles Small electrical appliances Start the power and move power supply

Characteristics: Rated voltage: 3.6/3.7/3.8/3.85 V Standard discharge continuous current: 0.2C Maximum continuous discharge current: 0.5C Working temperature: Charging: 0-45 Degree Discharge: -20~60 Degree Finished product internal resistance:

Characteristics Rated Voltage:1.2V Charging Voltage:1.4-1.45V Termination Voltage:0.9-1.0V Energy/weight:60-120 Wh/kg Energy/Volume140-300 Wh/L Power/Weight:250-1000 W/kg Selfdischarge Rate: Generally 20-30% per month Charging and Discharging efficiency:66% Number of Charging and Discharging cycles: 500-5000 Times Advantages:High Energy Density, Efficient at Highrate Discharges, Long Cycle Lif,e Wide Temperature Usage Range, Stable Electrochemical Characteristics, Pollutionfree Green Battery, No Memory, Effect Lower Costs, Good Safety Performance. Applications:Solar Lighting Emergency, Lighting Hightemperature Lamps, Car mounted TBOX, Car OBD, ECALL system Electric Tools, Medical Equipment, Vacuum Cleaner Shaver, Electric Toothbrush, Electric Toy Battery, Game Console Handle.

VRLA batteries are including three main types Absorbed Glass Mat AGM and Gel batteries and Tubular battery They are frequently utilized in uninterruptible power supply UPS systems emergency lighting installations and telecommunication equipment where continuous and hasslefree functionality is imperative Additionally VRLA batteries find extensive application in electric vehicles renewable energy systems and other contexts that necessitate a reliable and secure energy storage solution Advantages MaintenanceFree Operation Sealed Construction Enhanced Safety Versatile Applications Long Service Life Improved Efficiency Environmental Friendliness Higher Voltage Output Faster Recharge Rates Slower Discharge Rates Higher Capacity Range Economical

We offer high quality white cement (52.5) for 50 kg bag or as per customer requirement. Our materials are good for construction projects and decorative works.

Seamless steel pipe is mainly used for petroleum geological drilling pipe, cracking pipe for petrochemical industry, boiler pipe, bearing pipe and high-precision structural steel pipe for automobile, tractor and aviation. Standard, Application of Seamless Steel Pipe S.N. Standards Application 1 ASTM A53 Seamless and Welded Black and Hot-dipped Galvanized Steel Pipe 2 ASTM A106 Seamless Carbon Steel Pipe for High-Temperature Service 3 ASTM A179 Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes 4 ASTM A192 Seamless Carbon Steel Boiler Tubes for High-Pressure Service 5 ASTM A209 Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes 6 ASTM A210 Seamless Medium-Carbon Steel Boiler and Superheater Tubes 7 ASTM A213 Seamless Ferritic and Austenitic Alloy-Steel Boiler Superheater and Heat-Exchanger Tubes 8 ASTM A252 Welded and Seamless Steel Pipe Piles 9 ASTM A333 Seamless and Welded Steel Pipe for Low Temperature Service 10 ASTM A334 Seamless and Welded Carbon and Alloy Steel Tubes for Low Temperature Service 11 ASTM A335 Seamless Ferritic Alloy-Steel Pipe for High Temperature Service 12 ASTM A500 Cold Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes 13 ASTM A501 Hot Formed Welded and Seamless Carbon Steel Structural Tubing 14 ASTM A519 Seamless Carbon and Alloy Steel Mechanical Tubing 15 ASTM A523 Plain end Seamless and Electric Resistance Welded Steel Pipe for High Pressure Pipe Type Cable Circuits 16 ASTM A618 Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing 17 ASTM A714 High Strength Low Alloy Welded and Seamless Steel Pipe 18 ASTM A795 Black and Hot-Dipped Zinc Coated(Galvanized) Welded and Seamless Steel Pipe for Fire Protection USE

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiCo magnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shape. Application of AlNiCo Magnet: *Electronic Ignition Systems *Watt Hour Meters *Medical Instruments *Guitar Pickups *Industrial Motors *Hand Tools *Automatic Control Appliance *Vending Machines

Seamless steel pipe is mainly used for petroleum geological drilling pipe, cracking pipe for petrochemical industry, boiler pipe, bearing pipe and high-precision structural steel pipe for automobile, tractor and aviation. 1 JIS G3458 Alloy Steel Pipes for High Temperature Sevice 2 JIS G3441 Alloy Steel Tubes for Machine Purposes 3 JIS G3444 Carbon Steel Tubes for General Structure 4 JIS G3445 Carbon Steel Tubes for Machine Structure 5 JIS G3454 Carbon Steel Pipes for Pressure Service 6 JIS G3455 Carbon Steel Pipes for High Pressure Service 7 JIS G3456 Carbon and Alloy Steel Pipes for High Temperature Service 8 JIS G3460 Carbon and Alloy Steel Pipes for Low Temperature Service 9 JIS G3461 Carbon Steel Boiler and Heat Exchanger Tubes 10 JIS G3462 Alloy Steel Boiler and Heat Exchanger Tubes 11 JIS G3464 Steel Heat Exchanger Tubes for Low Temperature Service 12 JIS G3469 Polyethylene Coated Steel Pipe 13 JIS G3475 Carbon Steel Tubes for Building Structure 14 JIS G7216 Plain End Seamless Precision Steel Tube

Neodymium magnets are strong permanent magnets made from an alloy of neodymium, iron & boron. Part of the Rare-Earth magnet family, they have the highest magnetic properties of all permanent magnets. Due to their high magnetic strength and relatively low-cost, they are the preferred choice for many consumers, commercial, industrial and technical applications. NdFeB is divided into sintered NdFeB and bonded NdFeB. Bonded NdFeB is magnetic in all directions and corrosion resistance and is divided into Bonded Compression NdFeB Magnet and Bonded Injection NdFeB Magnet; while sintered NdFeB is easy to corrosion, the surface requires coating, generally divided into axial and radial magnetic charging. Advantages of NdFeB Magnet: 1. Very hard and brittle, high diamagnetic resistance, high cost / performance ratio, not suitable for high working temperature; 2. Magnetic performance is higher than that of the rare earth cobalt permanent magnet, the residual magnetic induction strength, magnetic induction coercivity, the maximum magnetic energy product is very high, is the current magnetic performance of the best permanent magnet; 3. High-cost performance. Application of NdFeB Magnet: �·Magnetic Resonance Imaging �·Actuators �·Security Systems �·Magnetic Guitar Pickups �·Electric Generators For Wind Turbines �·Sensors �·Loudspeakers And Headphones �·Specialty Door Catches �·Brushless Motor �·Magnetic Bearings And Couplings �·Magnetic Chuck �·Magnetic Toy �·Electric Motors �·Filter &Strainers Magnetic Tools �·Lifting And Compressor Motors �·Health Bandages And Plasters �·Electrical Power Steering �·Magnet Separators �·Other Magnetic

According to the purpose of welding steel pipe can be divided into general welding pipe, galvanized welding pipe, oxygen blowing welding pipe, wire casing, metric welding pipe, roller pipe, deep well pump pipe, automobile pipe, transformer pipe, welding thin wall pipe, welding special-shaped pipe and spiral welding pipe. 1 ASTM A134 Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over) Steel Pipe 2 ASTM A135 Electric-resistance-welded(ERW) steel pipe in NPS 2 to NPS 30 3 ASTM A139 Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over) 4 ASTM A178 Electric-Resistance-Welded(ERW) Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes 5 ASTM A214 Electric-Resistance-Welded(ERW) Carbon Steel Heat-Exchangerand Condenser Tubes 6 ASTM A250 Electric-Resistance-Welded(ERW) Ferritic Alloy-Steel Boiler and Superheater Tubes 7 ASTM A252 Welded and Seamless Steel Pipe Piles 8 ASTM A333 Seamless and Welded Steel Pipe for Low Temperature Service 9 ASTM A334 Seamless and Welded Carbon and Alloy Steel Tubes for Low Temperature Service 10 ASTM A381 Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems 11 ASTM A500 Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes 12 ASTM A501 Hot-Formed Welded and Seamless Carbon Steel Structural Tubing 13 ASTM A513 Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing 14 ASTM A523 Plain end Seamless and Electric Resistance Welded Steel Pipe for High Pressure Pipe Type Cable Circuits 15 ASTM A53 Seamless and Welded Black and Hot-dipped Galvanized Steel Pipe 16 ASTM A618 Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing 17 ASTM A671 Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures 18 ASTM A672 Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures 19 ASTM A691 Carbon and Alloy Steel Pipe Electric-Fusion-Welded for High-Pressure Service at High Temperatures 20 ASTM A714 High Strength Low Alloy Welded and Seamless Steel Pipe 21 ASTM A795 Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

Samarium Cobalt (SmCo) magnets are made by a sintering process and exist in two forms. The first is Sm1Co5(SmCo 1:5),which has a maximum energy product of between 14 and 24MGOe. The second and more common form is Sm2Co17(SmCo 2:17) which has a maximum energy product of between 22 and 32 MGOe. The main Sm2Co17 alloy is around 35% Samarium (Sm)and 60% Cobalt (Co)with the balance being from varying amounts of lron (Fe) Copper (Cu). Hafnium (Hf) and Zirconium (Zr). Praseodymium (Pr) may also be used. Sm1Co5 is made of only Sm and Co and has excellent corrosion resistance. Advantages of SmCo Magnet: 1.Superior resistance to high temperature. 2.Excellent resistance to corrosion, no coating is needed for surface protecting. 3.High working temperature. 4.SmCo is suitable for machines with high magnetic requirements and good for strict working environment requirement. Application of SmCo Magnet: *Electronic Magnetrons *Magnetic Treatment *Servo-Motors *Sensors *Magnetic Transmissions *Magnetars *Pump Couplings *Computer Disc Drives

Carbon Blocks used in furnace having a great alternative against Petcoke. As it has high melting power and cheap as compared to Petcoke. Here in India, we are a supplier and exporters of Carbon blocks. Parameters- Total moisture (Mt): 1.80% Ash(Aad): 13.07 Volatile matter (Vad): 13.94 Fixed Carbon (FCad): 77.88 Sulfur (S): 3.10

According to the purpose of welding steel pipe can be divided into general welding pipe, galvanized welding pipe, oxygen blowing welding pipe, wire casing, metric welding pipe, roller pipe, deep well pump pipe, automobile pipe, transformer pipe, welding thin wall pipe, welding special-shaped pipe and spiral welding pipe. 1 GB/T 13793 Steel Pipes with a Longitudinal Electric Resistance Weld 2 GB/T 14980 Major Diameter Welded Steel Pipes for Low Pressure liquid Service 3 GB/T 30063 Longitudinal Submerged Arc Welded Steel Tubes for Structural Purpose 4 GB/T 3091 Welded Steel Pipes for Low Pressure Liquid Delivery 5 GB/T 3092 Welded Steel Pipe for Low Pressure Service 6 GB/T 31315 Cold Drawn or Cold Rolled Precision Weld Steel Tubes for Mechanical Structures 7 GB/T 31940 Bi-Metal Composite Corrosion Resistance Steel Pipe for Fluid Transportation 8 GB/T 32970 Longitudinal Submerged-Arc Welded Steel Pipe for High Pressure Service at High Temperatures 9 GB/T 9711 Steel Pipe for Pipeline Transportation System