Product description: Plant root length and root surface area are important indexes to measure crop growth status because they are closely related to the intensity of crop photosynthesis and absorption of water and nutrients. The traditional manual method of cleaning and measurement of plant root systems requires a lot of time and labor work, and it is also prone to errors, which could seriously affect experimental process and accuracy. Root washing is a very important preliminary work for measurements of root systems, however, heavy loss of fine roots would seriously affect the reliability of measurements. QT-RW root system analyzer helps gently separate root systems from soil by swirling water and then collect all the roots in a 500-micron mesh filter. QT-RW root analyze system follows the design of the Australian Commonwealth Scientific and Industrial Research Organization (CSIRO) and it can well keep the integrity of fine roots, which can ensure the reliability of follow-up measurements by software. Features: 1. Depending on soil type and sample volume, 6 samples can be washed per hour; 2. The washing flow is less than 40L/min, and maintains 3500hPa which is the most suitable cleaning pressure; 3. Consist of an electric pump, a circulating water tank, to ensure adequate pressure and good supply of water; 4. The spray nozzles help to clean samples more effectively; 5. Analysis software is a powerful research platform, by which all steps from measurement to analysis can be done automatically. Technical Parameters: Size: 68cm*40cm*77cm Material: SUS304 high quality stainless steel Component: 2 root washing sinks A central overflow pipe Two water jets in the base. A constant water pressure system maintains the washing water flow with a pressure of 3500hPa Analysis software can measure total root length, root average diameter, total root area, total root volume, root tip counts, branch counts, root overlap counts, root diameter class distribution, the distribution of root apical segment length, etc. Made in China
Product name:fiberglass mesh Place of origin::hebei, china Brand name::fyc Application::wall materials Weight::30-300g, 80-160gsqm Width::20cm-200cm, 20cm-200cm Mesh size::2.5*2.5/3*3/4*4/5*5/10*10mm Weave type::plain woven, plain woven Yarn type::c-glass Alkali content::medium Standing temperature::500 Product name::fiberglass mesh Material::fiberglass yarn Color::customer's requirement Length::50-100mm Packing details::by shrink film first each roll, then put into carton Payment terms::tt, lc, dp, cash Fiberglass alkaline-resistance mesh The fiberglass alkaline-restance mesh fabric is on the basis of c-glassor e-glass woven fabric, then coated by acrylic acid copolymcrliquid. Application of fiberglass mesh : 1.Reinforce cement, stone, wall materials, roofing, and gypsum etc.. 2. All types of thermal insulation and heat protection. 3.Used in indoor and outdoor walls, prevent the various materials (such as brick, light wood, prefabricated structure) of treatment or caused by a variety of expansion coefficient of wall crack and break. 4.Roof waterproof. Advantage of fiberglass mesh 1.High strengthïgood impact resistance and not easy to be teared. 2.Good chemical stability 3.Good dimensional stability, stiffness, smoothness an difficult to shrink and deformation, good positioning property 4.Fire resistant, thermal insulation, sound insulation, insulations etc.
Product description: The lodging of maize, sorghum and tobacco has caused insufficient illumination, and in turn enormously limited crop yields for a long time. Meanwhile, it has also caused great difficulties in crop mechanized harvesting, thus a lot of grains have been wasted. This instrument can test plant stem strength, and it applies to genetic breeding in agriculture as well. Features: 1. Data can be shown on a big LCD with screen rotation function; 2. The instrument can be connected to computer for trial test, data downloading, printing and analysis. Several parameters such as input speed, area can be converted to displacement and pressure, respectively; 3. The instrument is equipped with various kinds of platens for convenient measurement; 4. It is easy to use, time saving, and of high precision; 5. The instrument can show remaining battery life and it can automatically power off when battery life is low. 6. The instrument is equipped with spiral test platform, ladder-shaped screw rod and hand wheel for easy and steady operation. Technical Parameters: · Model: QT-DFB01 · Maximum load: 500N · Measure units: Kgf/lb/N · Precision: +/-0.2%F.S,+/-digit · Display: 4-digit LCD display · Measuring value: Peak and current value, peak value can be maintained · Collecting rate: 1000 times/s · D/A conversion: 16-bitÎ?Σtype · Processor: 8-bit CPU · Working temperature: -20â?? to 40â?? · Power: NI-MH battery or external AC linear power adapter or USB power supply · Data output: USB · Auto power shutdown: 10 minutes without operations · Battery alarm: Battery icon will flicker when battery life is low. · Weight: 30 Kg Made in China
Product descriptionï¼?QT-LED1218 plant fill light lamp can help the formation of anthocyanin and restrain the elongation of branches, it can also make the plant stems and leaves grow better and accelerate plant growth. By the regulation of stomatal opening, it can promote oxygen demand, which helps plant gain more nutrients, and further promote the growth of root and the growth of leaves in the early stage of germination. The plant fill light lamp can also promote the growth of plants as a whole, and particularly in flowering period and fruiting period, it can make plant bloom and bear fruit 20-30 days earlier than usual, and it can make vegetable yield increase by 20% ~ 30%. It can also increase the vividness of flowers, increase the storage period of flowers, vegetables and fruits by 5 ~ 10 days, and reduce plant diseases, insect pests and malformed fruit. Features: Based on the traditional red and blue monochromatic LED plants fill light, pink color LED light is available; The light is completely designed in accordance with the standards of fluorescent lamp, with good interchangeability and compatibility; Light size, shape, power and input power supply can be customized according to usersâ?? requirements; Good quality, account for a large share in the market of LED plant fill light lamp; Using silica gel patch LED chips, good material and advanced technology, the lamp has less light degradation and longer service life.; The ratio of red to blue light can be adjusted easily without affecting the manufacturing process of lamps and structure change; Power supply can be customized as built-in type, external type, no power type. External power supply can extend the lifespan of the LED lamps. However, no power supply type is the best, which is no longer a constraint of the LED light; LED lamps for high temperature and humidity environment can reach IP65 waterproof grade, which guarantees waterproof, moisture proof, dust proof; Modular design makes maintenance easy and fast.
Product description: Stem flow is one of the subjects in the study of water balance in forest ecosystems. In hydrology, stemflow is the flow of intercepted water down the trunk or stem of a plant. Stem flow, along with through fall, are responsible for the transferral of precipitation and nutrients from the canopy to the soil. QT-Y/H stem flow collector is used to collect and analyze the stem flow. Principle: The system is composed of collecting units, a flow sensor and a data logger. It can continuously and automatically record the start time, end time and duration of stem flow, and also stem flow rate. The logged data can be export to excel or text file format to facilitate data processing. Features 1. The system is suitable for all kinds of trunks. QT-Y is better for trunk diameter less than 14 cm, QT-H is for more than 14 cm. 2. It is easy to install and battery-powered, no need of external power supply. 3. The system is equipped with a sensor with high resolution of 4.13 ml 4. The data logger can record the air temperature when the stem flow is running. Technical Parameters: Recording range: 0 - 66000ml, resolution: 4.13ml; Storage capability: 16,000 records; Can set the start time and date; Download mode: download data through the infrared downloader with USB interface EEPROM memory, no data loss when power outage; Fully-sealed data logger can be placed in the flow sensor device; Internal LED lights indicate operating status; The battery can last about 1 year. Event resolution: 1 second; Temperature measurement range: -20-70â??, temperature accuracy: 0.5â??, resolution: 0.1â??; Time accuracy: ±1 munities/week; The system is equipped with a protection case Made in China
Product description: Double ring infiltrometer is a simple device used to measure the rate of water infiltration into soil. Water infiltration rate is the water flows into a unit cross section of soil per unit time. It can be calculated by the measuring results and Darcy's law. The standard device includes several sets of stainless steel rings with different diameter, which can deal with several measurements at the same time to get accurate and reliable results. When vertical water flows to the edge, the outer ring of the infiltrometer will play a role in isolation. The water in the inner ring flows vertically, thus the measurement only occurs in the inner ring. Press these two rings into the soil a few centimeters deep by shock absorbing hammer. Because the inner and outer rings are filled with water, the water actually infiltrates vertically from the inner ring into the soil. To achieve a good result, the following factors that may affect the measurement should be taken into account: surface vegetation, soil density, soil temperature and soil layers. The best measurement results are derived from on-site water holding capacity. Application: Geology, civil engineering, hydrology, forestry, environmental testing, hydrogeology, runoff, swamp protection, permeability testing, construction project etc. Measuring standard: The soil with infiltration rate within 1X10-2 cm/s or sandy soil with higher infiltration rates. Features: · Consist of two cylindrical buckets with the diameter of 30cm and 60cm. · Made of durable stainless steel. · Cross stainless steel tubes in the center to keep steady. · Easy to press into soils · Easy to operate with perpendicular steel handles · Need to operate with Mariotte tubes Technical Parameters: Diameter of inner ring 30 cm Volume of inner ring 3000 ml Diameter of outer ring 60 cm Volume of outer ring 10000 ml Height of cylindrical buckets 50 cm Material of cylindrical buckets High-quality stainless steel Material of Mariotte Tubes PVC Origin: China
Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package20-25kg/bundle 15kg20kg/shaft 50kg250kg/barrel Materialadopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications: The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Chain link fence is also known as diamond wire mesh and rhombus wire mesh. Made of quality low steel wire, stainless steel wire, aluminum alloy wire and pvc wire. Chain link fence comes in a wire range of qualities, colours , sizes and types. The chain link has for elements: fabric, framework, fittings and gates. Each of these components are available in a range of weights and types of coatings you can mix and match to save costs, be more unique. Select chain link fence fabric based on: gauge of wire, size of mesh and type of protective coating. Several types of surface treatments help protect and beautify steel chain link fences. Assortments Electro gal.Chain link fence?hot dipped gal. Chain link fence?pvc coated chain link fence Characteristics (1)state and flexible (2)strong (3)does not break (4)does not sag or roll up the bottom Application (1)steel high quality low carbon steel wire rod, then make into the thickness low carbon steel wire with the drawing machine. (2)surface treatment: make the low carton steel wire into pvc wire, electric galvanized wire, hot-dipped galvanized wire. About zinc thickness of the hot-dipped galvanized wire, we can make as customers' required. (3)weaving: using the development machinery to make surface treatment finished low carbon steel wire into per-forming form, then linking them together. (4)the edge of the chain link fence :it is divided into two types. One type is a twisted one. Using special tools to make the edge heming or twisting. The hemed edge is more popular compared with the twisted edge. Customers can choose to their own needs. (5)the construction of chain link fence: we use the advanced machines to make the roll diameter of chain link fence into the smallest one, in order to save transportation costs by saving volume. (6)packing: wrap up the two edges of the crimpled rolls with the weaving bags.
China manufacturer thermal spray zinc wire 99.995% Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Materialadopt 0 distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying. Contact
Pure zinc thermal spray wire for arc spray Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large components. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc wire for power transmission tower Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure 99.995% zinc wire for metal protection Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-5.0mm Package:20--5okg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0 distillation zinc ingot , zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageïit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry
Zinc wire 99.995% for galvanized steel pipe Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-5.0mm (1.4mm , 1.6mm, 2.0mm, 2.5mm, 3.17, 4.76mm..) Package:20--50kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0 distillation zinc ingot , zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageïit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire / zinc wire suppliers The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry
Pure zinc wire /zinc wire brands The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire / wholesale zinc wire 3.17mm zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageï¼?it is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Pure zinc wire /cheap zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storaget is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Drum zinc wire price The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storaget is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Promotions zinc wire manufacturers Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0# distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageit is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
Zinc wire brand Pure zinc wire The surface of the zinc wire is smooth and bright, no broken wires, no greasy dirty and burrs, no scratches and scars, no jam in the process of use Product purity: zinc content more than 99.995% Diameter: 1.0mm-4.0mm Package:20--5kg/bundle 15kg-20kg/shaft 50kg-250kg/barrel Material: adopt 0distillation zinc ingot produced by hulo island zinc co., ltd, zinc content more than 99.995%. The material used is strictly stick to national standards gb/470-2008 Characters: 1.The size and shape of spray will not be affected. You can spray on the whole surface, and also you can spray the limited surface which is convenient and economical to the parts of large conponents. 2.The parent material will not change. Because when spraying, the parent material will become small due to low temperature. 3.The thick of coating can be changed in large range from several microns to several millimeters 4.It can be sprayed to form shapes. Hot spraying technology can be used not only to form shape in the surface, but also to manufacture mechanical parts, that is spraying molding products. Transportation storageït is forbidden to bring with acid, alkali, salt corrosion of zinc by packaging and transportation shipment, and it should be stored in dry, ventilated, non-corrosion material warehouse and keep out of rain. Applications The thermal spraying wire is used in a variety of applications, such as: 1.High-temperature oxidation protection used, for example, to resist gases in boiler atmospheres 2.Coatings to resist heat and prevent scaling of conventional low alloy steels 3.Bond coats for improving the adhesion of top coatings 4.Coatings on moulds in the glass industry It is used in the flame spraying, arc spraying, supersonic plasma spraying, the ordinary plasma spraying.
