Hepa Filter Suppliers and Manufacturers

Accepta 2091 Antiscalant & Antifoulant for Reverse Osmosis, Nanofiltration & EDR Systems Antiscalant and antifoulant for reverse osmosis, nanofiltration and EDR membranes Accepta 2091 is a high performance, multi-functionalreverse osmosis antiscalant and antifoulant scientifically formulated for the treatment and protection of reverse osmosis (RO) membranes, nanofiltration (NF) and EDR membrane systems. Accepta 2091 can be used in the production of drinking water and in seawater desalination process applications and is highly effective in preventing the build-up of calcium carbonate scale on RO membrane surfaces. Besides its excellent calcium carbonate scale inhibition properties, Accepta 2091 is also effective at controlling calcium sulphate, calcium fluoride and metal oxides scale. Accepta 2091 can be used in the production of drinking water according to NSF standard 60. The maximum allowed dose rate is 10 mg/l. Product Benefits High performance RO membrane antiscalant and antifoulant Suitable for use in seawater desalination process applications Ideal for drinking water applications according to NSF standard 60 Highly effective calcium carbonate scale control Additional control of calcium sulphate, calcium fluoride and metal oxides scale Not affected by chlorine or other oxidizing biocides Product Properties Appearance: Liquid Colour: Clear, pale yellow Specific gravity: 1.22 @20 oC pH: 10.5 @25 oC Boiling point: > 100°C Flash point Non flammable aqueous solution Chemical reactivity Not affected by chlorine or other oxidising biocides *Full details of the product properties are available in the Safety Data Sheet. See below. Application & Dosage Information Accepta 2091 should be injected in membrane systems after chlorine and sodium metabisulphite treatment. Accepta 2091 can be used in the production of drinking water according to NSF standard 60 where the maximum allowed dosage rate is 10 mg/l. Accepta 2091 is not compatible with residual cationic polymers from the pre-treatment. The dosage level of Accepta 2091 is dependent on the quality of the feed water and the saturation indices of the various scales forming species present in the concentrated brine. Recommended injection point is into the feed water, downstream of any filtration equipment and cartridge filters. Accepta 2091 is miscible with water in all proportions. It may be applied as neat product, or as a solution in permeate water. A minimum dosing solution strength of 10% is recommended. This product should be dosed continuously and proportionally to the feed water flow. It is always advisable to carry out a 'Control Of Substances Hazardous to Health' (COSHH) assessment before use. For further technical assistance concerning Accepta 2091 please contact local agent.

Antiscalant & Antifoulant for Reverse Osmosis, Nanofiltration & EDR Membrane Systems Antiscalant and antifoulant for reverse osmosis, nanofiltration and EDR membranes Accepta 2651 is a high performance, multi-functional reverse osmosis antiscalant and antifoulant scientifically formulated for the treatment and protection of reverse osmosis (RO) membranes, nanofiltration (NF) and EDR membrane systems. Accepta 2651 can be used in the production of drinking water and in seawater desalination process applications and is highly effective in preventing the build-up of calcium carbonate scale on reverse osmosis, nanofiltration and EDR membrane surfaces. Besides its excellent calcium carbonate scale inhibition properties, Accepta 2651 is also effective at controlling calcium sulphate, calcium fluoride and metal oxides scale. Accepta 2651 can be used in the production of drinking water according to NSF standard 60. The maximum allowed dose rate is 10 mg/l. Product Benefits • High performance RO membrane antiscalant and antifoulant • Ideal for RO, NF and EDR membrane systems • Suitable for use in seawater desalination process applications • Ideal for drinking water applications according to NSF standard 60 • Highly effective calcium carbonate scale control • Additional control of calcium sulphate, calcium fluoride and metal oxides scale • Not affected by chlorine or other oxidizing biocides Product Properties Appearance: Liquid Colour: Clear, pale yellow Specific gravity: 1.2-1.3 @20 oC pH: 7.5-10.5 @25 oC Boiling point: > 100°C Flash point Non flammable aqueous solution Chemical reactivity Not affected by chlorine or other oxidising biocides *Full details of the product properties are available in the Safety Data Sheet. See below. Application & Dosage Information Accepta 2651 should be injected in membrane systems after chlorine and sodium metabisulphite treatment. Accepta 2651 can be used in the production of drinking water according to NSF standard 60 where the maximum allowed dosage rate is 10 mg/l. Accepta 2651 is not compatible with residual cationic polymers from the pre-treatment. The dosage level of Accepta 2651 is dependent on the quality of the feed water and the saturation indices of the various scales forming species present in the concentrated brine. Dosage levels of Accepta 2651 when used in seawater desalination applications should be calculated using Accepta's specialist software, for further support and information please contact Accepta. Recommended injection point is into the feed water, downstream of any filtration equipment and cartridge filters. For further technical assistance concerning Accepta 2651 please contact Accepta.

Gigabit 8 SFP2 Ethernet Media Converter Feature * Commonly used in network series or cascade occasions, with 1000M optical port and the second line on the joint optical port * Card type or independent structure for centralized management 2U Aluminum rack * Operating Mechanism broadcast filtering, address auto-learning and auto-update feature and store and forward * Often cache size is 512KB, address table size is 4KB * Ethernet 10Base-T or 100Base-TX to 100Base-FX fiber media converter * Support IEEE 802.3U, IEEE 802.3X, IEEE 802.1d protocol * Supports full-duplex flow control or half-duplex backpressure flow control work, and with auto-negotiation (Auto Negotiation) capacity * Electrical ports support 100Mbps, 10Mbps, electrical interface can be used at both ends do not match the same rate (when full duplex wire-speed bandwidth 2XMbps) * Missing link to provide remote diagnostics, electrical and optical interface port link diagnostic link connection, dynamic data transmission, full / half duplex, speed indicato * Provides dual RJ-45 electrical ports support automatic cross-connect switches, hubs * Optical interface characteristics, compatibility, high reliability Application Environment Urban Intelligent Traffic Monitoring System (ITS), Safe City Highway monitoring system, electronic road monitoring, network cameras Large industrial enterprise security monitoring system, network multifunction system Remote multimedia teaching / campus monitoring, remote network video conference system Technical Specification Product Name 10/100/1000M 8-Port SFP Media Converter Model ES1000-2G-8F Description 1000M 8-Port SFP Media Converter Media Converter Ports 2 10/100/1000Mbps copper RJ45 Port + 8 10/100/1000Mbps SFP Port Transmision Distance 20Km Optical Fiber Multi-level series type, LC, 1310nm/1550nm Fiber Bandwidth 1.25G,10G Ethernet Bandwidth 1000MHz Network Media 100BASE-TX/1000BASE-TX:super cat.5 UTP Cable Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.1af DTE Power via MDI Forward Mode Store and Forward Environment Operating Temperature: -20 ~ 55 C Operating Temperature: -20 ~ 55 ° C Operating Humidity: 5%~9%,non-condensing EMI Compatiblity FCC Class A, CE Power DC 5V3A Demension 200mm*127mm*30mm Warranty 2 year warranty

â?¢ Manufacturer: Komatsu â?¢ Construction: Wheel loader with articulated steering and emergency steering device â?¢ Type: WA600-6 â?¢ Year: 2011 â?¢ Operating Hours: 13,086 hours â?¢ Machine complies with the CE Regulation MACHINE DATA: â?¢ Net weight: 52 930 KG â?¢ Max weight load: 74.830 KG â?¢ Articulated steering with emergency steering device â?¢ Fenders front â?¢ Halogen work lights front and rear â?¢ Rear row alarm â?¢ 4 "Goodyear" tires, tire size 35 / L5 65RL5K MOTOR: â?¢ Manufacturer: Komatsu â?¢ Engine type; SAA6D170E-5 â?¢ Turbo Charged â?¢ Direct injection â?¢ Engine output 374 kW / 502 hp â?¢ Number of cylinders: 6 â?¢ Equipped with electronically controlled fuel injection "Common Rail" â?¢ Conform: TIER III Emission requirements Transmission â?¢ automatic transmission with manual or selection between two levels of automatic shifting â?¢ With Kick down and Gear Hold â?¢ Beagle Cooling System HYDRAULIC SYSTEM â?¢ Z kinematic system of the shovel â?¢ Boom kick-out and return â?¢ Speed Automatic Power System (APS) â?¢ 2 lever control SERVICE LEVEL AGREEMENT (SLA) - MAINTENANCE comprising: â?¢ Duration 60 months to max. 15 000 operating hours â?¢ Including o.a .; â?¢ Periodic maintenance â?¢ Use of genuine Komatsu parts â?¢ Use of oils required by Komatsu â?¢ Labor and travel costs â?¢ Drain oil and filter â?¢ New for old replacement parts â?¢ Control and inspection of non-original parts Komatsu Excluded â?¢ Ties â?¢ Accessories â?¢ Daily maintenance and inspection â?¢ Cleaning machine parts â?¢ Periodic sampling and analysis of the oil OTHER â?¢ the instruction manual supplied with the machine TECHNICAL STATE The machine is partly due to the policy maintenance policy e.s.d.-SIC and the service level agreement in 100% technical condition. Identified paint damage and usage - paintwork and user traces on both lifting arms - paintwork and wear on drive shaft - paintwork and wear Z-kinematic lever - paintwork and wear on truck rear and underside entire machine - light user traces around rims with wear

Fire Area 6 9 11 Micron C Glass Fiber Yarn Fiberglass Glass Fiber Yarn Glass Fiber Yarn Description: 1. It is made of fiberglass roving yarns which are bulked and blown through special instrument with high pressure air. 2. It has high strength as continuous fiber and fluffiness as staple fiber, low thermal conductivity coefficient, high dust-accommodation and filterability. 3. Glass fiber texturized yarn with metallic (copper wire, inconel wire or stainless wire) are also available. Glass Fiber Yarn Applications: 1. Fiberglass yarn has advantage as insulating ability. 2. It is good and fire resistant against heat material, used as heat insulation, electrical insulation materials and also made into other products. 3. It with metallic can extensively apply to friction materials. 4. It is the excellent substitute for asbe stos. Beschreibung: Ein. Es ist aus Glasfaser Vorgarnen die gebauschten und geblasenes durch spezielle Instrument mit Hochdruckluft sind hergestellt. 2. Es hat eine hohe Festigkeit als kontinuierliche Faser und fluffiness als Stapelfaser, niedrige Wärmeleitzahl, hohe Staub-Unterkunft und Filtrierbarkeit. 3. Texturized Glasfasergarn mit metallic (Kupferdraht, Inconel Draht oder rostfreier Draht) sind ebenfalls erhältlich. Anwendungen: Ein. Fiberglasgarn hat den Vorteil als isolierende Fähigkeit. 2. Es ist gut und Feuer beständig gegen Hitze Material, wie Wärmedämmung, elektrische Isolierstoffe und machte auch in anderen Produkten verwendet. 3. Es wird mit metallischen kann ausgiebig, um die Reibung Materialien. 4. Es ist der ausgezeichneter Ersatz für Asbest. RFQ� 1. What is your MOQ? MOQ may vary by customer's special requirement; we try our best to meet your business requirement. 2. What's your payment terms? We normally do T/T, and we can also offer western union account for transfer money. And more flexible payment terms, welcome to have a discuss. 3. Can you provide samples? Yes, we can offer samples, and some samples are free 4. Can you delivery by express? Yes, we can delivery by any express. 5. When will the sample be ready? Normally, the sample can be ready in 3 days.

Latex Gloves Production Line Product Description Introduction Latex gloves are one kind of glovesandit is different fromthe general gloves.By the emulsion processing it can be used as a family, industry, medical, beauty and other industries. Latex glovesarean essential hand protective equipment.Usingnatural latex, with other fine additives,latex glovesis producedthrough special surface treatmentand to be made forcomfortable wearing. For industrial, agricultural production, medical treatmentordaily life, ithas a wide range of applications.Latex gloveshassmooth latex gloves, pitted latex gloves, transparent latex gloves, stripes latex gloves, and powder free latex gloves.latex gloves are divided intoseveral sorts according to the usage: disposable latex gloves, hous ehold gloves, latex industrial gloves, medical latex gloves, etc.; length: 23cm, 30cm (9 ", 12"); 0.08mm-0.09mm thickness; color: beige/ paleyellow; main ingredients: natural latex; import and export commo dities encoding 4015; packing: 100pcs/ bag (vacuum packaging); specifications: XS, S, M, L, XL; 100% natural latex latex gloves hasve ry high dexterityso wearing it is very comfortablewhilethere is a high strength. Pinhole rate is lowhence with excellent closed protectio n characteristics. It is widely used in electronics, food, medicine and optoelectronics and other related industries. Processes Rubber will be sliced after mixing machine then sent to the melting tank for mixing with the gasoline. The sol has been sent to the latex storage tank after it has beenemulsified and modulated.The rubber melt into the gasoline will be sent into the top of the distillationtower. The gasoline has been separateby heating. The latex remain in the reaction tank will be sent to the mixing tank by the pressure itself and the latex will come out from the centrifugal. After adding colour and filter, the latex is ready for use. Gloves modelwill be cleanedfirst by acid, water cleaning;Cleaning modelbyimmersing itintothe hot water. Afterthat the clean mouldneeds tohavecoagulant dipping. Dipping step follows by theoven preliminary drying, addingfiber inner sleeve, sent to the hot oven curing, drying molding. After stripping, the gloves will run theinflatingcheck, low temperatureshaping, middle temperatureshaping, water washing, dehydration, drying and then packing to send the finished product warehouse.

Main parts: Laser chiller famous brand compress, and high flow high head pumps, safety and environmental protection, energy saving and durable. Chiller Parts: the vast maj,ity of the use of "book" the ,iginal product, model configuration and diverse, stable perf,mance, long service life. Laser Chiller Applications One-stop automatic intelligent temperature control of electric chiller: in different environment, user does not need to change setting due to it will automatically switch to appropriate operating temperature. CW-5200AG chiller air cooled: applied to cool a single 150W CO2 laser tube , dual 100W CO2 laser tubes; CW-5200AH refrigeration chillers: applied to a cool a single 8KW CNC spindle , welding equipment; CW-5200AI cold water chiller: applied to a cool single 50W-75W laser diode, a single 30W solid-state laser , a single 50W RF laser tube; Optional: CW-5200 dual water inlet and outlet series; heat booster; water filter. CW 5200 Laser Chiller Specifications Model CW-5200AG CW-5200BG CW-5200DG CW-5200AI CW-5200BI CW-5200DI Voltage 220V 220V 110V 220V 220V 110V Frequency 50Hz 60Hz 60Hz 50Hz 60Hz 60Hz Current 2.4~3.1A 2.6~3.3A 4.5~6.5A 2.4~3.1A 2.6~3.3A 4.5~6.5A Compress, power 0.52KW 0.5KW 0.68KW 0.52KW 0.5KW 0.68KW Refrigeration capacity 1.49KW 1.46KW 1.56KW 1.49KW 1.46KW 1.56KW Refrigerant R-22 / R-134a / R-410a Refrigerant charge 360g 380g 350g 360g 380g 350g Precision ±0 Reducer Capillary Protection Over current protection f, compress,, flow alarm, over temperature alarm Pump power 43.2W Tank capacity 9L Inlet and outlet of chiller w,king External Φ10mm brass connect, Φ10mm speedy connect, Max. lift 10 M 25M Max. flow 10 L/min 16 L/min N.W 29Kgs G.W 31Kgs Dimension 56 X 28 X 47 cm (L X W X H) Package dimension 72 X 44 X 57 cm (L X W X H) Note: other electric sources can be customized; heating and higher temperature control precision functions are optional.

Baoding BD95-9 four-wheel drive wood grasping five major advantages of the product shine around the market Shandong Baoding excavator grasping wood manufacturers specializing in the production of various types of grasping wood products, from an unknown manufacturing enterprises and then in the grasping wood market control is not small, just three or four years, Baoding 9W series of wood Machine products, in the grasping machine market all the way ride, leading the domestic grasping wood market. Baoding grasping wood manufacturers 9W series of wood products Baoding 9W series of wood products is how to step by step into a timber loading and selling products, which depends on the product of the five major advantages. 1. Work fuel consumption economy, Baoding 9W series of large flow variable piston pump system intelligent matching control grasping wood machine equipment working condition, high efficiency 8%, low fuel consumption 10%, real-time protection of hydraulic system is not normal operation damage The Baoding grab wooden machine manufacturers 9W series wheeled grasping wood products 2. Work power, Baoding 9W series of grasping wood machine Weichai power supercharged engine displacement torque than the competitive brand generally 20% strong power, for grasping the high-intensity operation of the wood to create a strong support. Baoding 95 wheeled wooden machine 3. Easy to operate, Baoding 9W series of products using manual hydraulic control system, easy to operate, control more accurate. Baoding 95 wheeled wooden machine 4. Maintenance costs ultra "low", joint professional manufacturers to develop long-life oil, diesel filter, hydraulic oil, through two years of market validation, customer maintenance cycle to extend 1 times the product maintenance costs by 50%. 5. Driving environment is superior, the use of FOPS / ROPS cab and the development of new dust and noise reduction technology, safety 5 times higher than the average cab, cab noise reduced by 5dB, to the benchmark level. Baoding wheeled wood products For the wood market and raw, all-conquering! Almost perfect test, countless harsh conditions test, Baoding BD95W-9 grasping wood for the user, not only the value of choice, it is the choice of experts!

FOB Price: US $25.0 - 2,000 / Set  Min.Order Quantity: 1 Set/Sets Gate valve MOQ:5set Supply Ability: 20000 Ton/Tons per Year Soft sealing gate valve Supply capacity is large Port: TIANJINXINGANG ,SHANGHAI PORT,NINGBO PORT Payment Terms: L/C,T/T,Western Union,MoneyGram,Amount less than 500$, we just accept 100% payments Quick Details Standard or Nonstandard: Standard Structure: Gate Pressure: Low Pressure, PN10/16 Power: Manual Material: Casting Temperature of Media: Normal Temperature, ?¤80?? Media: Water Port Size: 1 1/2inch-24inch gate valve Place of Origin: Hebei, China (Mainland) Model Number: Z45X-10/16 Brand Name: PYL Application: General Name of product: Z45X-10/16 Soft sealing Non-rising gate valve flange ends DN50-600 Authentication of product: ISO9001&14001 Material of product: Ductile Iron Standard: DIN gate valve Size range: DN50-600 Natural of company: Manufacturer Main item: Flanges,valves,pipe fittings Factory History: Since 1996s Packaging & Delivery Packaging Details: For the flange, generally we use the wooden box and wooden pallet with plastic film, for the Z45X-10/16 Soft sealing Non-rising gate valve flange ends DN50-600, we can use those two type, and also we use the Woven bag. In addtion, we can change the shape of the packaging according to customer requirements. Delivery Detail: Shipped in 30 days after payment The main vlalve products of our company include (1) ANSI gate valve, DIN gate valve, GOST gate valve, Soft sealing gate valve, Knife gate vave, Flat gate valve (2)Wafer type butterfly valve, flange type butterlfy valve, single eccentric butterfly valve, double eccentric butterfly valve, Three eccentric buterrfly valve (3)Check valve, lift check valve, swing check valve, wafer type check valve, spring check valve (4) ball valve, tee ball valve, 4 way ball valve, welding ball valve (5)strainer, filter, Y type strianer Materials WCB A216 ; Q235,ST37 ; LBC/LCC ; WC6/WC9 ; WCC ; CA15 A217 ; M-30C ; H.B/H.C ; HT250/GG25 ; GGG40 ; SS304 ; SS304L ; SS316 ; SS316L THE MAIN TYPE AND MATERIAL OF OUR VALVE

FOB Price: US $20 - 2,000 / Set Min.Order Quantity: 1 Set/Sets MOQ 1SET OIL APPILICATION MANUAL CARBON STEEL BUTTERFLY VALVE Supply Ability: 20000 Ton/Tons per Year Butterfly valve supply capacity is large. Port: Tian jin xin gang,Shang hai port,Ning bo port Payment Terms: L/C,T/T,Western Union,MoneyGram,amount less than 500 sets,we just accept 100% payments Quick Details Standard or Nonstandard: Standard Structure: Butterfly Pressure: Low Pressure Power: Manual Material: Casting Temperature of Media: Medium Temperature Media: Base Port Size: Standard Place of Origin: Hebei, China (Mainland) Model Number: OEM Brand Name: PYL Application: General Product name: DN50 standard Center line-type butterfly valve with PTFE seat Type: butterfly valve Certificate: ISO9001 Medium: Water/Oil/Gas Size: DN40-200 Color: Customer's Request Body material: Stainless steel Seal Material: Customer's Request Stem: carbon steel or ductile iron or stainless steel history of our factory: since 1996 Packaging & Delivery Packaging Details: Usually we use the wooden box and plastic film to pack this type of butterfly valve,we will follow your advice,anyway,the products will be kept safely and cleanly. Delivery Detail: 3-45 days DN50 standard Center line-type butterfly valve with PTFE seat   Part Name   Material   Valve Body / Bonnet   Carbon steel / stainless steel   Disc / Stem   Stainless Steel   Sealing Surface  Stainless Steel / Hard Alloy The main vlalve products of our company include (1) ANSI gate valve, DIN gate valve, GOST gate valve, Soft sealing gate valve, Knife gate vave, Flat gate valve (2)Wafer type butterfly valve, flange type butterlfy valve, single eccentric butterfly valve, double eccentric butterfly valve, Three eccentric buterrfly valve (3)Check valve, lift check valve, swing check valve, wafer type check valve, spring check valve (4) ball valve, tee ball valve, 4 way ball valve, welding ball valve (5)strainer, filter, Y type strianer Materials WCB A216 ; Q235,ST37 ; LBC/LCC ; WC6/WC9 ; WCC ; CA15 A217 ; M-30C ; H.B/H.C ; HT250/GG25 ; GGG40 ; SS304 ; SS304L ; SS316 ; SS316L THE MAIN TYPE AND MATERIAL OF OUR VALVE

FOB Price: US $200 - 2,000 / Set MinOrder Quantity: MOQ 5 set Supply Ability: 20000 Ton/Tons per Year H41/44W-16/25/40 Stainless steel check Supply capacity is large Port: Xin gang Shanghai Port Ningbo Port Payment Terms: L/C,T/T,Western Union,MoneyGram,H41/44W-16/25/40 Stainless steel check valve series swing check valve amount less than 500$, we just accept 100% payments Quick Details Standard or Nonstandard: Standard Structure: Check Pressure: Low Pressure Power: Manual Material: Stainless Steel Temperature of Media: Medium Temperature Media: Base Port Size: DN15-DN400 swing check valve Place of Origin: Hebei, China (Mainland) Model Number: H41/44W-16/25/40 check valve Brand Name: PYL Application: General Name: H41/44W-16/25/40 Stainless steel check valve series swing check valve Structure of product: swing check valve Size of product: DN15-DN400 swing check valve Material of product: Stainless steel check valve Technic of product: Casting check valve swing check valve Prssure of product: PN6 PN10 PN16 PN25 PN40 PN64 PN100 Certification: ISO9001&14001 Nature of the campany: Manufacturer Factory history: Since 1996s Main item: Gate valve and all kinds of flanges Packaging & Delivery Packaging Details: Woven bag, wooden box, wooden pallet with plastic film, container (we can change the shape of the packaging according to customer requirements) Delivery Detail: Shipped in 30 days after payment The main vlalve products of our company include (1) ANSI gate valve, DIN gate valve, GOST gate valve, Soft sealing gate valve, Knife gate vave, Flat gate valve (2)Wafer type butterfly valve, flange type butterlfy valve, single eccentric butterfly valve, double eccentric butterfly valve, Three eccentric buterrfly valve (3)Check valve, lift check valve, swing check valve, wafer type check valve, spring check valve (4) ball valve, tee ball valve, 4 way ball valve, welding ball valve (5)strainer, filter, Y type strianer Materials WCB A216 ; Q235,ST37 ; LBC/LCC ; WC6/WC9 ; WCC ; CA15 A217 ; M-30C ; HB/HC ; HT250/GG25 ; GGG40 ; SS304 ; SS304L ; SS316 ; SS316L THE MAIN TYPE AND MATERIAL OF OUR VALVE

Min.Order quantity:1 set/sets gate valve moq 10set Supply ability:20000 ton/tons per year knife gate valve supply capacity is large Port:tian jin xin gang, shang hai port, ning bo port Payment terms:l/c, t/t, western union, moneygram, amount less than 500 sets, we just accept 100% payments Quick details Standard or nonstandard: standard Structure: gate Pressure: low pressure, pn10/16 Power: manual Material: stainless steel Temperature of media: medium temperature Media: mud/sewage/ash residue/paper pulp/coal-slurry Port size: standard Place of origin: hebei, china (mainland) Model number: z73/573/673/973 Brand name: pyl Application: general Product name: z73/573/673/973 mud knife gate valve carbon steel/stainless steel Type: gate valve Certificate: iso9001 Medium: mud/sewage/ash residue/paper pulp/coal-slurry Size: dn50-600 Appropriation temperature: ?¤120?? Body material: carbon steel/stainless steel Seal material: customer's request History of our factory: since 1996 Packaging & delivery Packaging details:usually we use the wooden box and plastic film to pack this type of gate valve, we will follow your advice, anyway, the products will be kept safely and cleanly. Delivery detail:3-45 days The main vlalve products of our company include (1) ansi gate valve, din gate valve, gost gate valve, soft sealing gate valve, knife gate vave, flat gate valve (2)wafer type butterfly valve, flange type butterlfy valve, single eccentric butterfly valve, double eccentric butterfly valve, three eccentric buterrfly valve (3)check valve, lift check valve, swing check valve, wafer type check valve, spring check valve (4) ball valve, tee ball valve, 4 way ball valve, welding ball valve (5)strainer, filter, y type strianer Materials Wcb a216 ; q235, st37 ; lbc/lcc ; wc6/wc9 ; wcc ; ca15 a217 ; m-30c ; h.B/h.C ; ht250/gg25 ; ggg40 ; ss304 ; ss304l ; ss316 ; ss316l The main type and material of our valve

Supply Ability: 20000 Ton/Tons per Year Port: Tianjin Xingang, Shanghai Port, Ningbo Port Overview Specifications Standard or Nonstandard: Standard Structure: Stop Pressure: Medium Pressure Power: Manual Material: Casting Temperature of Media: Normal Temperature Media: Water Port Size: DN15-DN400 (1/2"-16" ) Place of Origin: Hebei, China (Mainland) Model Number: DIN globe valve Application: General Body material: Carbon steel, Stainless steel Body forms: Straight pattern body, Y-pattern body, Angle pattern body Working pressure: PN16,PN25,PN40,PN63 Temperature Rating: -40°C up to +420°C Connections: Flanged ends, Butt welding ends, Socket welding ends, Threaded ends Operation: Handwheel, Lever, Gear operator, Pneumatic, Electric Design&manufacture standard: EN 13709 Face to face standard: EN 558-1 Flange standard: EN 1092-1 Trim: SS304; 2Cr13 Packaging & Delivery Packaging Details: Woven bag, wooden box, wooden pallet with plastic film, container (we can change the shape of the packaging according to customer requirements) Delivery Detail: Shipped in 15 days after payment Product Description Product Name DIN Bellows Seal Cast Steel Globe Valve �Stop Valve � Material carbon steel; stainless steel Pressure PN16,PN25,PN40,PN63 Size DN15-DN400 Temperature Rating -40°C up to +420°C Body forms Straight pattern body, Y-pattern body, Angle pattern body Connections Flanged ends, Butt welding ends, Socket welding ends, Threaded ends, Other requirements Trim SS304; 2Cr13 The main vlalve products of our company include (1) ANSI gate valve, DIN gate valve, GOST gate valve, Soft sealing gate valve, Knife gate vave, Flat gate valve (2)Wafer type butterfly valve, flange type butterlfy valve, single eccentric butterfly valve, double eccentric butterfly valve, Three eccentric buterrfly valve (3)Check valve, lift check valve, swing check valve, wafer type check valve, spring check valve (4) ball valve, tee ball valve, 4 way ball valve, welding ball valve (5)strainer, filter, Y type strianer Materials WCB A216 ; Q235,ST37 ; LBC/LCC ; WC6/WC9 ; WCC ; CA15 A217 ; M-30C ; H.B/H.C ; HT250/GG25 ; GGG40 ; SS304 ; SS304L ; SS316 ; SS316L THE MAIN TYPE AND MATERIAL OF OUR VALVE

â??Dear, Itâ??s easy to against the SMOG!â?� Three protections in one mask! - First layer(Outer) Water repellent, prevent you away from the spit, bacteria, dust and PM2.5 - Second layer Electrets filter, isolates the tiny particles, no more harmful substance. - Third layer Excellent effect of moisture absorption and wicking, against the growing bacteria, skin-friendly fabric stimulates the cells regenerate, make the skin metabolize naturally. ----------------------------------------------------------------- Bacfree Surgical Mask Innovation 2.0 - Metal nose clip The design of the nose clip for kids can fully cover their nose and mouth, and they can also adjust the clip to fit the nose bridge. Kids won't feel uncomfortable even long time wearing it. - Strap- high elasticity We use high elasticity smartcel cloth to make the strap, and it can sustain 2kg heavy pull without losing the elasticity. The cloth is made from the material with low sensitivity, so you won't be allergy or feeling uncomfortable even long wearing it. - 3D Cut With 3D cut, the facial mask can fit and fully cover every kind of faces, from your nose bridge to your chin, and you don't have to worry about the deformation. ----------------------------------------------------------------- What can bacfree do for kids? - Against harmful UV Zinc Oxide can build a shield on the cover of the skin, however, your skin will not absorb it and there is no irritation, allergy and acne for the skin. - Against smog PM2.5, air pollution Particulate matter 2.5 is a thousand times bigger than zinc oxide, so bacfree prevents  us from the air pollution, particulate matter 2.5 and haze. - Protect sensitive skin Zinc Oxide forms a protection on the skin, calm the skin and prevent sensitivity and irritation. - Helps healing wounds It also has the effect of dryness, convergence, isolate the wound area. Zinc Oxide can stimulate the wound heal faster, anti-oxidation; stimulates the new skin growing faster and the high activity of anti-oxidation. - Long acting antibacterial, fight with over 600 kinds - Growth and development Strengthen the leukocyte in immune system; dyspepsia is because of the lack of zinc. - Anti-mite Mite causes allergy, and makes respiratory tract uncomfortable, and zinc oxide can completely kill the mite; give you a good quality of life back. -

Roots type blower is a positive displacement blower, also know as rotary lobe blower, tri lobe blower, twin lobe blower, rotary piston blower, roots pump, roots compressor etc. Single stage of pressure upto 1.0 kg/cm2 (1.0 bar) Double stage of pressure upto 2.0 kg/cm2 (2.0 bar) Single stage of vacuum to -0.8 kg/cm2 (-0.8 bar) Capacity of single stage upto 49476 m3/hr, that is 29120 cfm Medium transferred: air & gas ( biogas/ coal gas/ so2/hydrogen etc unstabe gases) Contact me for more: roots_blower@126.com It works as a pressure blower and/or vacuum pump for medium air and gas. Single stage of pressure upto 1.0 kg/cm2; Capacity upto 49476 m3/hr; Vacuum upto -0.8 kg/cm2 Our roots blower and vacuum pump can be V belt driving or Direct coupling. Air cooled roots blower, Water cooled roots blower available. The blowers are made by using state of art technologies and CNC machines. Material for transfer air is cast iron, for gas roots blower and gas vacuum pump, Ni-P coating and Teflon ( PTFE) and Stainless Steel available. ETP Blower applied as air blower used in effluent treatment plant for aeration filter backwash etc. purpose. The air roots blowers we offer are tri lobe rotary lobe blower or twin lobe rotary blower, these are a positive displacement blower, famous as roots blower or roots air compressor. The biggest capacity of single stage we manufacture is 49476 m3/hr. The pressure can reach 1.0 kg/cm2, that is 1 bar. Besides pressure blowers, Airus blower can also offer suction Vacuum Pump, and vacuum can reach -0.8 kg/cm2, that is 0.8 bar. Airus blower, belongs to Huadong blower, are widely used in etp field and also stp ( sewage treatment plant) and also for many other fields, such as, aquaculture fish pond or shrimp pond, cement plant, oil & gas, chemical industry, sugar plant, food plant, steel plant and power plant etc. Huadong Airus blower can transfer air and also gas ( coal gas, biogas, natural gas, hydrogen etc) with anti-corrosion anti-explosion treatment. Applications ( pressure blower & vacuum pump) Wastewater treatment Stp/ Etp Aquaculture Pneumatic conveying of bulk material ( cement/ fly ash/ grains/ power & particals etc)Cement plantSteel plant Power plant Paper plant Sugar plant Food plant Oil & Gas …

Product introduction The normal valve that is widely used in the market for a long time,which has the problem of leaking and easy to rust.Our company adopt soft sealing gate valve that produced by foreign advanced technology,overcome the shortage of normal gate valves,including poor sealing,elastic fatique and easy to rust.It's the update production of tradition valves.it takes advantage of compensation effect that comes out from mircoscale transformation of flexible disc,achieving good sealing effect.It has the remarkable virtue of switch convenient,reliable seal,better elatic memory,long lifetime and etc.It's utillized as the controlling and checking equipment in tap water, construction, food, electric,medicine,metallurgy,light textile,waste water,energy system and so on fluid pipeline. Structure and characteristic 1.Entirety rubber coating valve core which skeleton is nodular cast iron,high performance rubber and lastest vulcanization technology clads all the inside and outside machine body,tight fit,excellent elastic seal to reach "0"leak. 2.Three o-rings design,firm tight,fictional resistance decrease largely and environment sanitary,change the rubber gasket withou stop the water. 3.Corrosion resistance,inside and outside is painted by epoxy resin,the inner parts ads stainless steel and copper alloy to prevent rust and fluid corrosion.Can directly uses in domestic water,medicine and etc business. Hebei Guanlin Vales Manufacturing Co.,Ltd is located in No.2 road of botou economic developing zone,hebei,which is famous as the name of "town of the casting",Facing the challenge of economic globalization,our company is determined to make valves and pipe bigger and stronger, with the goal of producing high quality productions.With 26 million CNY additional capital,update from three ways including equipment and scientific research,at the same time coorperate with Shanghai Tongji University.Invent the next generation locked valve(patent number 201220400904.X),invent anti-off tube in 2013(patent number 201320812627.8). Main products are soft seal gate valves,new type the next generation locked valves,leak stopper,flange type two join-three direct links,water meter flexible filter,flexiblity unions malleable,soft flexibility expansion pipe,vertical connecting pipe,water diversion lip, fastener anti theft well lid, water power control valves,check valves,air release valves,ductile iron pipe and etc series products,widely used in all kinds of pipeline and device for the business of tap water,drainage,coal,gas,fire control, chemical,mine,railway.

Introduction Sino-NSH centrifuge is a centrifugal separator which can separate solid matter from two kinds of different density liquids on a continuous basis and also to separate two liquids simultaneously. By reducing process cycle time and labor requirements, these separators offer high cost efficiency in liquid clarification and reclamation, solid-liquid separation and its classification, recovery and thickening of solids and in other such processes. Description Sino-NSH centrifugal separators, using principle of different density of oil, water, solid (light, heavy phases) getting different velocity, separate the insoluble liquids or solid particles. After getting through heating system, the viscosity of oil lowers down. Then it is fed in through a system of closed lines. The heavy liquid phase is pressure discharged by means of a centripetal pump. The clean oil is also discharged by means of a centripetal pump. The centrifuges operate with regulating rings for the heavy phase. Application Apply for lubrication oil, fuel, etc. Two phase, three phase separating Effective separate substances and solids from liquids. Fuel treatment, Lube oil treatment, Marine, Power stations, Oil field industry. Centrifugal separator mainly apply to treat fuel, lubrication oil and other mineral oils in marine diesel engines and diesel generator sets in which contain water and mechanical impurities. CS series will result in reducing mechanical wear of the diesel engines and other machines so as to greatly extend lifetime of machinery. CS series can also be applied to separate two different liquids with different proportion and being immiscible. Specification Model Bowl Speed(rpm) Capacity(Per Hour) Running Load(Watts) Witdh Front to Back Height 250 7300 500 4 850 850 1200 400 7038 1500 7.5 1500 1100 1550 500 6600 5000 15.5 1772 1500 1855 550 6200 8000 18.5 1970 1560 1970 700 4500 35000 55 2097 1897 2384 Feature • Full automation possible with PLC automatic control panel. • Centrifugal separation requiring no filter media. • High reliability drive train system backed by delivery of over 1,000 units a year. • Bowl design with superior separation performance and with good response to discharge loads. • Pilot valve regulates total/partial discharge of solids. • Super partial discharger (option) minimizes liquid loss and maximizes thickening of solid • fraction for discharge. • Vibration-proof design realizes long working life. • Full automation possible with PLC automatic control panel

Oxygen Plant Introduction: The Oxygen Plant is based on PSA (Pressure Swing Adsorption) Technology, which is more and more popular used for on-site oxygen supply or filling oxygen cylinders. Our Oxygen Plant with cylinder filling station consists of air compressor, air dryer, air filters, PSA oxygen generator, oxygen compressor, cylinder filling station and related control system. The patented design enable our Oxygen Plant a lowest energy consumption and best efficiency. Oxygen Plant specifications: 1. Oxygen Production capacity: 3~200Nm3/h (12cylinders/day to 800 cylinders/day) 2. Oxygen purity: 93+/-3% 3. Oxygen output pressure: 1-5bar 4. Pressure for filling oxygen cylinders: 150bar (after oxygen booster) 5. The Oxygen Generator can be used for filling oxygen cylinders or onsite application; 6. Skid-mounted enable an easy installation and transportation. Standard Oxygen Plant: ModelProd capacity (Nm3/h)O2 purity (%)Outlet pressure (bar)Compressed air Min. (m3/min)Working pressure (bar)Power consumption (KW) STPO-4493+/-3%1-50.865.5-7.55.43 STPO-5593+/-3%1-51.175.5-7.57.60 STPO-8893+/-3%1-51.875.5-7.511.75 STPO-101093+/-3%1-52.335.5-7.515.75 STPO-151593+/-3%1-53.255.5-7.519.05 STPO-202093+/-3%1-54.305.5-7.531.59 STPO-252593+/-3%1-55.805.5-7.531.59 STPO-303093+/-3%1-57.005.5-7.539.04 STPO-353593+/-3%1-57.585.5-7.547.00 STPO-404093+/-3%1-59.305.5-7.557.70 STPO-454593+/-3%1-510.55.5-7.557.70 STPO-505093+/-3%1-510.65.5-7.557.70 STPO-606093+/-3%1-514.05.5-7.577.70 STPO-656593+/-3%1-515.25.5-7.592.70 STPO-707093+/-3%1-516.25.5-7.592.70 STPO-808093+/-3%1-518.75.5-7.5114.5 STPO-909093+/-3%1-520.05.5-7.5114.5 STPO-10010093+/-3%1-523.35.5-7.5137.0 STPO-16016093+/-3%1-537.45.5-7.5229.0 STPO-20020093+/-3%1-546.75.5-7.5274.0 Remark: Above standard model Oxygen Plant is based on an altitude of

Our Technology Advantages AFT Technology Adopt a multi-spectrum pulsed light which filters out the wavelength above 950nm to keep much water in the target skin so that the treatment is painless. EDF Technology To make sure the energy of every shot and pulse is the same and stable to keep safe treatment. In-montion Operation To shorten the time of treatment session, Accelerate the operation, save 1/2 treatment time Painless 1. Specific wavelength keeps much water in the target skin 2. EDF (Equally Distributed Fluence) ensures the uniform of energy Self-checking & monitor Monitor water circulation and identified handpiece to keep safe working Charging-Monitor Ensure the capacitors charging energy correctly Identified Handpiece Ensure safety Automatical Calibrate Constant and accurate energy output Application It could be used for hair removal and improving skin conditions. Besides, it can be used for all kinds of skin blemishes and skin diseases. Hair Removal Such as armpit hair, beard, lip hair, hairline, bikini hair, body hair Skin Rejuvenation Skin whitening, minimize pores, repair rough skin, enhance skin elasticity, smooth tiny wrinkles, eliminate and fade acne scars Pimples Acne, allergic acne, crusted acne Pigmentation removal Clear or desalinate all kinds of pigment and chorioplaque, such as freckle, Chloasma, age pigment, sunburn etc. Vascular redness Clear vascular redness, erythema and acne rosacea Specifications Model S8 Light Source Pure Sapphire Spot Size SHR: 15*50mm SSR 8*40mm Wavelength 420-950nm for SAC(Optional), 570-950nm for SSR(Skin Rejuvenation), 650-950nm for SHR(Hair Removal) Power 220V/50Hz, 110V/60Hz Xenon Lamp Imported Lamp Fluence 1-7J/cm2 for SHR, 1-12J/cm2 for SSR(SAC, Optional) Timer 1s, 3s and 30s for SHR 1s, 2s, 12s for SSR(SAC, Optional) Frequency 3Hz for SHR, 2Hz for SSR(SAC, Optional) Intergrated Cooling 1-4 Degree Display 15" Colorful Touch Screen Calibrating Machine Automatic Calibrated Water Cooling Circulated Monitored In-scene Working Environment Indoor Use Only 69cm * 56cm * 134cm 80KG

Overview: Processing method: outside chip removing; gun drill Hole diameter(mm): ¦µ1.5~¦µ8 Hole depth(mm): 500 Nc system: gsk980tdc / fanuc oi mate tc Drill pipe: frequency control; simultaneously rotating and feeding Workpiece: mounted on the bench Guide sleeve: pneumatically drive and traverse Workpiece clamping: for axial parts, mounted on the bench by tooling; Plate type parts can be directly mounted on the bench Parameter: Processing ability: 1. Number of spindle(pcs): 1 2. Hole diameter(mm): ¦µ1.5~¦µ8 3. Hole depth(mm): 500 4. Area of bench (m2): 700 x 1200 5. Bench lifting distance(mm): 300 6. Bench traverse distance (mm): 500 7. Bench load-bearing(kg): 750 Processing speed: 1. Max rotation speed of drill pipe¡¯s spindle (r/min): 15000 2. Workpiece rotation speed(r/min): 500 (fixed) 3. Feeding speed range(mm/min): ¡ü2000 4. Feeding fast forward speed(mm/min): 2000 5. Bench fast lifting speed(mm/min): 1000 6. Bench fast traverse speed(mm/min): 2000 Processing accuracy: 1. Hole skewness: ¡ü1/1000 2. Dimensional accuracy of drill pipe: it7~it11 3. Hole rugosity: ra0.4~ra1.6 4. Positioning accuracy: x 0.03; y 0.03; z 0.035 Re-positioning accuracy: x 0.02; y 0.02; z 0.025 Power of machine 1. Drill pipe motor power(kw): 2.2 2. Oil pump power(kw): 4 3. Bench traverse power(kw): 1.2 Bench traverse torque(m.N): 7 4. Feeding power(kw): 1.2 Feeding torque(m.N): 7 5. Bench lifting power(kw): 2.5 Bench lifting torque(m.N): 20 6. Power of oil-temp cooling machine(kw): 2.8 7. Total power(kw): 18 Hydraulic system 1. Max volume of flow(l/min): 20 2. Max pressure(mp): 16 3. Filtering accuracy(um): 10 4. Oil storage capacity(l): 960 Basic dimension & weight 1. Dimension (mm): 4000*3000*1800(l*w*h) 2. Height between drill pipe centre and ground(mm): 1020 3. Height between drill pipe centre and bench(mm): 297.0 4. Weight of main engine(kg): 5000 5. Weight of cooling system(kg): 2000