A single sided flexible circuit construction with a polyimide cover film laminated to copper allowing access from one side only. Application of sigle sided flex circuits: Optical pick-up for a/v & computer ( or cdp & dvdp) Camera Capstan motor for camcoder & vcr Vibration motor for mobile phone Stepping motor. Parameter of flexible circuits: Board thickness:0.2-6.5mm Minimum conductor spacing/width:0.1/0.1mm Panel size: max-250*400 -12288; Drilling diameter size: max diameter -6.5mm; min. Diameter-0.25mm Base material cupper thickness: max-0.070mm, min-0.012mm Insulate layer thickness: max-0.05mm (pi thickness) min-0.0125mm (pi thickness) Electronic plating sn/pb thickness:3um --- 20um -12288; Electronic plating au thickness: above0.05um -12288; Chemical immersion ni/au thickness:0.05um --- 0.1um -12288; Electronic plating sn thickness:3um --- 20um -12288; Etching width & space: s:3mil (0.076mm) d f m:4mil (0.100mm) . Please contact us now for more information about flexible circuits & flexible printed circuits.
1.This a4 paper cutting machine adopts the servo motor (or stepless motor) to control the fixed-length cutting, feeding.It is equipped with the photoelectric, correction, tracing modifying system. It can do crosscutting and vertical cutting at the same time.And it can trace feeding institution with the products, blowing& absorbing transportation at same time, automatic collecting, robert automatic folding materials and cross transport to worktable. 2.Drive system use pneumatic system, photoelectric sensor to control, folding materials system use oil pressure to improve equipment..This machine integrates photo electric, liquid and gas as a whole, plc touching screen, and has the features of easy operationhigh-precision cuttingstate operation and low noise. 3.The machine has the feature of the motor frequency speed adjustment, automation counting, giving an alarm when stop and tension with digital indication. 4.All transitional rollers can be done in clients opinions to avoid surface injure. 5.This machine is very important to scratch of gloss photo paper. wooden case
1. Original imported airend from Germany, the most advance airend in the world 2. Original imported key components 3. Low Engergy Consumption, Low runing, maintenance cost. 4. Aptitude and intelligent Control, PLC control, LCD displayer. 5. Unique safe units make whole compressor more safty, more stable, lest noise, lest energry Loss. 6. Easy to install, operate, maintent. Model SCR10I-7 SCR10I-8 SCR10I-10 SCR10I-13 Capacity/Pressure (m3/min.Mpa-1) 1.2/0.7 1.1/0.8 0.9/1.0 0.8/1.3 Motor Power(KW) 7.5KW(10H.P) Speed(r/min) 2878 Starting way Directly startup Volt(V) 380(440/220) Motor safety grade IP54 Motor isolation grade F Electrical Supply 380V/50HZ/3Phase or 440(220)V/60HZ/3Phase Outlet Temperature( ¿¼C ) í- Enviroment Temperature í+ 8¿¼C Driven way Belt Driven Noise level at 1 meter 68 í+ 3dB(A) Cooled method Air cooling Oil content 1 ~ 3 ppm Outlet Connection Rc 1/2 " Dimension Length(mm) 1050 Width(mm) 600 Height(mm) 950 Weight(kg) 250
Heavy duty pillar drill machine Model no. 38kpt Drilling capacity in steel 38mm No. Of spindle speed 8 Range of speed 70-1910 rpm Morse taper in spindle nose mt-4 Dist. Between spindle center to column face 270mm Quill movement 250mm Working surface of the table 440mm Dimension of base plate 760x480mm Working surface of base plate 500x350mm Max. Dist. Between spindle nose to baseplate 1000 Max. Dist. Between spindle nose to table 565mm Center dist. Between foundation bolts 620x335mm Diameter of column 112-60 Fine feed attachment Motor kw / speed 1.5hp / 960rpm No. Of v.Belt b-55 Nett weight of machine 350kg Standard accessories: motor pulley, instruction manual, drill drift. Extra accessories: electric motor, drill chuck & arbour, v.Belt, r.F switch. Wooden case packing, goony packing, export packing
Machine type JCJX-B20 Control system Traditional analog type or By computer digital control Inverter control Dual Inverter control Drawing dies No./Max. 20 Inlet diameter ª¦0.60��ª¦1.20mm Outlet diameter ª¦0.10��ª¦0.50mm Drawing line speed 800m/min Slip ratio of m/c 15% Fix speed capstan slip ratio 10% Frame Welded by steel plate Capstan Tungsten plasma capstan Main motor 15KW Spooler motor 3.7KW Capstan dia. (Max.) ª¦200mm Fix speed capstan dia. ª¦200mm Spool bobbin size ª¦300mm or according to customers requirements Send-out method Shaft type Traversing unit synchronous motor +Belt Transmission type By flat belts Spooler control PID synchronous spooler Detecting device Weight balance by swing arm Tension control Weight balance type Max. loading capacity 40KG Lubrication type Water immersion type Brake Magnetic brake Power source 380V 50/60HZ Lubricant oil capacity 40Liter/minute Machine dimension (mm) 2000í-1300í-1050 Machine weight 2500KG
1.1 surface planer Arbor dia. ¬)72mm Arbor speed 5400r/min Max. Width 300mm Max. Removal 3mm Motor power 2.2kw 220v(380v) 50hz 1.2 thickness planer Range of thickness 6-240mm Max. Removal 3mm Feeding speed 7.5m/min 1.3 saw Blade dia. ¬)305mm Arbor speed 3500r/min Arbor dia. ¬)30mm Max. Cutting height 90mm(at 90fp) Tilting cutting height 65mm(at 45fp) Max. Crosscutting width 1600mm or 2800mm or 3000mm or 3200mm Motor power 2.2kw 1.4 moulder Arbor dia. ¬)30 mm Arbor useful height 85mm Arbor speed 1750 r/min or 3500r/min or 6700r/min Cutter rotating max. Dia. ¬)180 mm Use shaping hood Cutter rotating max. Dia. ¬)140 mm Motor power 2.2kw 1.5 scorer Blade dia. ¬)90f¯3f¯¬)20 mm Rotating speed 7000r/min 1.6 drilling Drilling dia.(fixed form) ¬)16mm Or (self-centering) ¬)3-16mm Max drilling depth 80 mm N.W./g.W. 1600mm(550/660kg) or 2800mm(578/694kg) or 3000mm(585/688kg) or 3200mm(590/704kg) Packing size: 1630f¯1440f¯1020 mm Wooden box
Ht-450/13 large drawing machine&annealer Host machine 1)inlet wire diameter:max 8.0mm 2)outlet wire diameter:1.2-3.5mm 3)max linear speed:25m/s 4)max drawing pass:13 5)fix speed capstan dia.:450mm 6)speed ratio between capstans:1.238(1.241) 7)max size of dies:43mm x 35mm 8)main motor:278kw (dc) 9)motor for finish capstan:75kw Accumulator 10)workion pressure:0.6-0.7mpa 11)inflate value:ía 0.02mpa Dual take-up 12)max take-up speed:1500m/min 13)diamater of barrel:1.2-3.5mm 14)take-up motor:15kw(dc) 15)spooler banister capcity:max 2000kg 16)total weight:7000kg 17)machine dimensions:3000 x 2000 x 4650 Machine dimensions:3000 x 2000 x 4650 Total weight:7000kg
Ht-450/13 large drawing machine&annealer Host machine 1)inlet wire diameter:max 8.0mm 2)outlet wire diameter:1.2-3.5mm 3)max linear speed:25m/s 4)max drawing pass:13 5)fix speed capstan dia.:450mm 6)speed ratio between capstans:1.238(1.241) 7)max size of dies:43mm x 35mm 8)main motor:278kw (dc) 9)motor for finish capstan:75kw Accumulator 10)workion pressure:0.6-0.7mpa 11)inflate value:ía 0.02mpa Dual take-up 12)max take-up speed:1500m/min 13)diamater of barrel:1.2-3.5mm 14)take-up motor:15kw(dc) 15)spooler banister capcity:max 2000kg 16)total weight:7000kg 17)machine dimensions:3000 x 2000 x 4650 3000 x 2000 x 4650
Cooling Area (approx.) Mtr / Ft-20 / 200 Air through Dist (approx.) Mtr / Ft-11 / 37 Engg. Plastic Blower / Fan-Blower Blower / Fan Dia. mm/inch-205 / 8 Speed Control-Three Motor (R.P.M.)-1400 Air Delivery (M/hr)-1200 Wattage (approx.) W-160 Water Tank Capacity (Ltr.)-20 Motorised louvre movement-YES Humidity Contorl-YES Ice Chamber-Available Water Inlet-Top Mosquito Net / Dust Filter-YES Water level indicator-YES Openable cooling pads-NO Cooling Media-Honeycomb Portability-Portable Trolley-Not Required Castors-YES Plastic mounting for motors-YES Motor cover-YES Works on inverter-YES Product Dimensions L x B x H (mm)-500x380x840 L x B x H (inches)- 20x15x33 CARTON DIMENSIONS L x B x H(mm)-556x436x910 Qty. in 40' HC container-326 Net wt (kgs / lbs)-10 / 22 Gross Wt (Kgs / Lbs)-13 / 29 Certifications-CE, SASO Carton dimensions: l x b x h(mm)-556x436x910
Shrink albelling machine All stainless steel constructed machine structure with superior rigidity and stability. Design with pleasing appearance provides a better mobility. Machine is employ with high quality dc motor, deceleration motor to ensure the best performance. The machine is manufactured and operated to completely comply with ce standards for utmost quality and safety. Employing driver and control plc systems from mitsubishi for best compatibility and convenient maintance. Equip with advance touch panel interface for more luxury and user friendly. Whole new concept of labeling system, the labeling positioning procedure is completed Simultaneous with conveyor speed, easy to adjust by dc motor driver. We use world class brand optical sensor adopted on the machine to ensure the best accuracy. The machine's high range features give customer more feasibility in your product. Reasonable price With 100% satisfaction, we give you confidence. 1150 x 1300 x 2050 550kg
High-pressure micropowder grinder The high-pressure micropowder grinder is a new type of high-efficiency, which is developed by the engineers through several years' hard work depending on the production experiences.It adopts the fineness grading technology from germany and japan and tackles the difficulty in classifying super-powders. It is mainly used in super-powder processing with more than 500 kinds of materials, such as feldspar, talcum, barite, marble, limestone, charcoal blacks, and china clay, with a fineness of 500 meshes (25um) to 2500 meshes (5um) and the minimal fineness of 3500 meshes (3.55um). Specification Parameter type Itemygm7826ygm8327ygm9531 Number of rollers (pcs)334 Diameter of rollers (mm)260270310 Internal diameter of ring (mm)780830950 Rotational speed of main unit (r/min)160140130 Max. Feeding size (mm)+20+20+20 Capacity (kg/h)50-50065-680150-1000 Motor of the main unity225s-8-18.5y225m-8-22y225s-4-37 Motor of the blowery160l-4-15y180m-4-22y220l-4-30 Motor of the classifiery160m-4-6y160m-6-5.5y160m-6-7.5 Total power (kw)37.544.574.5 Overall dimension (m)4.5*4.2*5.15.3*4.1*5.27.1*5.9*7.9 Weight (t) Diameter of final particle (mesh)500 mesh to 1250 mesh, the finest can reach 2500 mesh
Auto Cutting & Sewing Machines Features: The hy/sp-150l has got two models one is 24-30 bags/min and other one is equipped with servo motor and the output is 25-32 bags/min This machine is belt type bag canveyoring system and equipped with auto open mouth, single bottom folder, auto bag counting system and japanese brand sewing machine " new long " dn-2hs The hy/sp-150h is the most update & precision model woven bag conversion line and the output is 30-42 bags/min. This machine is clip type bag conveyoring system and equipped with anto open mouth device, crank type non-stop cutter, sewing thread breaking alarm and japanese brand sewing machine : new long -dkn - 3bp. The epc, mark reading sensor, gusseting, micro perforation, cold cutter, double folder, double stitch and union special sewing unit are able to meet special requirement The controlling system of this machine is by human machinery interface, two inverter motors and servo motor
Auto Cutting & Sewing Machines Features: The hy/sp-150l has got two models one is 24-30 bags/min and other one is equipped with servo motor and the output is 25-32 bags/min This machine is belt type bag canveyoring system and equipped with auto open mouth, single bottom folder, auto bag counting system and japanese brand sewing machine " new long " dn-2hs The hy/sp-150h is the most update & precision model woven bag conversion line and the output is 30-42 bags/min. This machine is clip type bag conveyoring system and equipped with anto open mouth device, crank type non-stop cutter, sewing thread breaking alarm and japanese brand sewing machine : new long -dkn - 3bp The epc, mark reading sensor, gusseting, micro perforation, cold cutter, double folder, double stitch and union special sewing unit are able to meet special requirement The controlling system of this machine is by human machinery interface, two inverter motors and servo motor
These are working form semant plant size 17mm into 5mm
20 holes Squid 30cm octopus Trolling Fishing Lures Length: 30cm Weight: 60 gram Plenty of glitter on the body and eyes Fish Species: All Saltwater, American Angler, Australian Bass, Australian Salmon Features: Big Game, Skirted, Trolling
Brown Color Big Game Squid Trolling Lure Bait Skirt Octopus Length:30cm Weight: 60 gram Plently of glitter on the body and eyes Fish Species: All Saltwater, American Angler, Australian Bass, Australian Salmon Features: Big Game, Skirted, Trolli
Big Game Squid Trolling Lure Bait Skirt Octopus Length:30cm Weight: 60 gram Plently of glitter on the body and eyes Fish Species: All Saltwater, American Angler, Australian Bass, Australian Salmon Features: Big Game, Skirted, Trolling
Luminous Squid 30cm octopus Trolling Fishing Lures Length: 30cm Weight: 60 gram Plenty of glitter on the body and eyes Fish Species: All Saltwater, American Angler, Australian Bass, Australian Salmon Features: Big Game, Skirted, Trolling
7-30cm Squid skirt octopus Trolling Fishing Lures Length:7-30cm Weight: 10-60 gram Plently of glitter on the body and eyes Fish Species: All Saltwater, American Angler, Australian Bass, Australian Salmon Features: Big Game, Skirted, Trolling
Squid Trolling Big Game Lure Bait Skirt Length:30cm Weight: 60 gram Plently of glitter on the body and eyes Fish Species: All Saltwater, American Angler, Australian Bass, Australian Salmon Features: Big Game, Skirted, Trolling
