Ductile iron wedge, fully vulcanised with EPDM; O-ring stem seals replaceable under pressure; Fully corrosion resistant construction; Fusion bonded epoxy coated; Body bonnet bolts sealed with hot melt; Bosses for sampling or by-passing. Applicable standards: ISO5996, BS5163/5150, DIN3352.
DIN3352-F4/EN1171 PN25 OD40-300 BOLTED BONNET REPLACEABLE O-RING RUBBER ENCAPSULATED WEDGE BRASS WEDGE NUT FBE BLUE COATED INSIDE AND OUTSIDE
Titanium gate valve Gate valve Industrial valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, Wafer, Lug Pressure range: 150LB, 1.0MPa~25.0MPa Size range: NPS3/8-40, DN10~DN1000 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Titanium knife gate valve is designed specifically for reliable in difficult services in pulp and paper mill, petrochemical industries, mining ect. application. This type valve is with optional seats and can be specially designed with electric, pneumatic actuation based on the local control, which facilitates automatically operation. 1. Designed with wafer type structure, shorter face to face dimension, small volume,light weight. It is convenient for installation, carriage, storage and piping layout. Its cost-effective valve. 2. Packing seal use Japan DAKIN PTFE.. 3. The knife shape gate can easily cut off materials, fibers and sundries, preventing clogging and easy for closure and open. 4. Replaceable seat make sure easy for repairing. 5. Designed with straight type, small flow resistivity and more safe application. 6. Handwheel with anti-corrosive plastic coating, which obtains good look and convenient for handle 7. The complete round port area provides maximum flow capacity and minimum head loss. 8. Operation: Hand wheel, Gear, Pneumatic, Hydraulic, Electric actuator
Nickel gate valve Gate valve Manual Valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Solid wedge / Flexible graphite Full bore / Reduce bore Bolted bonnet Renewable seat / integral seat
Stainless steel gate valve Gate valve Manual Valve Industrial valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Solid wedge / Flexible graphite Full bore / Reduce bore Bolted bonnet Renewable seat / integral seat
NAB C95800 gate valve Gate valve Manual Valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Solid wedge / Flexible graphite Full bore / Reduce bore Bolted bonnet Renewable seat / integral seat
904L gate valve Super austenitic gate valve Gate valve Manual Valve 904L valve, 904L valves for phosphoric acid Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator
Alloy 20 gate valve Super austenitic gate valve Gate valve Manual Valve Alloy valve manufacturer, alloy 20 valve Technical Specification Design Standard: API, ASME, EN, ISO, JIS, DIN, BS, GB Connection type: Flange, SW, NPT, BW Pressure range: 150LB~1500LB, 1.0MPa~25.0MPa, JIS10K~100K Size range: NPS3/8-42, DN10~DN800 Drive: Hand wheel, Gear, Electric, Pneumatic actuator Design Feature: Solid wedge / Flexible graphite Full bore / Reduce bore Bolted bonnet Renewable seat / integral seat
Size: 1/2" - 2" Material: FS & SS These are available either with Treaded or Socket Weld ends. Hard Faced Trim material ensures perfect Sealing and long life. Perfectly machined and Lapped Back Seat is provided to ensure re-packing/replacing of Gland Packing in stream, when the Valve is in full open condition, ensures maximum safety, convenience and economy.
Cast steel gate valves Sizes: 2” to 60” (50 mm to 1500 mm) Class: 150 to 2500 Design: api 600 Ends: rf, rtj, bw Style: flex wedge, parallel slide Materials: wcb, lcc, alloy grades
We supply fc&fl&fls&wkm valves with good quality and very competitive price. Hope to be a partner of your company! We supply different type of api 6a gate valve including fc&fl&fls, lu, aa-hh, psl1-3, pr1.Pr2. We offer you with a good quality and competitive price. Our fc gate valve is interchangeable with cameron model fc gate valve. Manufactured and tested in accordance with api spec 6a Forged steel body and bonnet A true bi-directional valve Low operating torque Quick release hand wheel Api spec 6a psl, 1, 2, 3 Material classes dd, ee, ff, to nace mr-01-75 Available from 5000 psi to 15, 000 psi in all full-bore sizes
We supply FC&FL&FLS&WKM Valves with good quality and very competitive price. Hope to be a partner of your company! we supply different type of API 6A gate valve including FC&FL&FLS,LU,AA-HH,PSL1-3,PR1.PR2. we offer you with a good quality and competitive price. Our FC GATE VALVE is interchangeable with Cameron Model FC Gate Valve. Manufactured and Tested in Accordance with API Spec 6A Forged Steel Body and Bonnet A True Bi-Directional Valve Low Operating Torque Quick Release Hand Wheel API Spec 6A PSL, 1, 2, 3 Material Classes DD, EE, FF, to NACE MR-01-75 Available from 5000 psi to 15,000 psi in all Full-Bore Sizes
Gates for knife gate valves.
Manhole cover : ductile iron Eblow material: cast iron, gray cast iron Nominal size: dn50-dn300 Standard: din/ en877, iso6594, astm a 888, cispi301, ksd4307
Nominal pressure:1.6mpa Strength 2.4mpa Enclose:1.76mpa Suiable temperature:
Electric Actuated Gate valve Manufacturer in Germany Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve. The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position. Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications. Advantages of Electric Actuated Gate Valve: It is suitable for both above ground and underground installation. The closing feature of this valve is exceptionally good. These valves can be used in a circuit both ways. Pressure loss is minimum Industries of electric actuated gate valve: Petrochemical Refineries Process plants Oil and gas Description: Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6 Size: DN15 to DN700 Pressure: PN10 to PN450,150 to 2500 End: Flanged, Socket weld, Butt weld. Operation: Electric actuated. Electric actuator details- Torque 3 9 nm Operating pressure- 8 Bar Port Connection-NPT1.4 Mounting Base-ISO5211 Temperature--20 C - +80 C
Electric Actuated Gate valve Manufacturer in Germany Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve. The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position. Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications. Advantages of Electric Actuated Gate Valve: It is suitable for both above ground and underground installation. The closing feature of this valve is exceptionally good. These valves can be used in a circuit both ways. Pressure loss is minimum Industries of electric actuated gate valve: Petrochemical Refineries Process plants Oil and gas Description: Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6 Size: DN15 to DN700 Pressure: PN10 to PN450,150 to 2500 End: Flanged, Socket weld, Butt weld. Operation: Electric actuated. Electric actuator details- Torque 3 9 nm Operating pressure- 8 Bar Port Connection-NPT1.4
API6A 2-9/16"15000psi Gate Valve Working Pressure:2000Psi ~20000 Psi(14 ~ 138Mpa) Nominal Diameter:1.13/16" -4.1/16" (46mm ~ 103mm) Material Grade:AA- FF Grade(AA-BB-CC-DD-EE-FF) Product Specification Level:PSL 1~4 Performance Requirement:PR 1~2 Working Temperature:L·U (-46~121) Working Medium:petroleum, natural gas, slurry, containing H2S and CO2 Outlet Connection Form:flange, clamp. Union, threaded and welded Or as per customer's requirements
Gate Valve Extended Stem
FORGED BOLTED / WELDED / PRESSURE SEAL BONNET Bonny Valve has very extended experience in manufacturing of Forged Gate Valves Size: �½ inch up to 2 inch (DN 15 up to DN 50) Pressure Rating: ASME 150LB to 2500LB Materials: Forged Carbon Steel, Low Temperature Forged Carbon Steel, Forged Stainless Steel, Forged Duplex Stainless Steel, Forged Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc. End Connection: NPT, SW, BW, Flanged RF, FF, RTJ, Ends Operator: Hand wheel Operated Specification: Design â??API 602 / BS 5352/ ASME B16.34 End Flange â?? ASME B16.5 BW End â?? ASME B16.25 SW End â?? ASME B16.11 Screwed Ends â?? ASME â?? ANME B1.20.1 Test â?? API598 Special â?? NACE MR-01-75 Features: Bolted Bonnet,Welded Bonnet or Pressure Seal Bonnet Solid Wedge Full port or Conventional Port Outside Screw and Yoke (OS&Y), Rising Stem Extended Bonnet For Cryogenic Services Locking Device Optional