CAST BOLTED / PRESSURE SEAL BONNET Bonny Valve has very extended experience in manufacturing of Cast Gate Valves Size: 2 up to 60(DN50 up to DN1500) Pressure Rating: ASME 150#,300#,600#,900#,1500#, 2500# Materials: Carbon Steel, Low Temperature Carbon Steel, Stainless Steel, Duplex Stainless Steel, Super Duplex Stainless Steel, Nickel Alloys, Nickel Aluminum Bronze, Hastelloy, Inconel Etc. End Connection: Flanged RF, FF, RTJ, BW Operator: Hand wheel, Gear OP. Specification: Design API 600 / ASME B16.34 Face to Face ASME B16.10 End to End ASME B16.10 End Flange ASME B16.5 BW End ASME B16.25 Test API598 Special NACE MR-01-75 Features: Bolted Bonnet or Pressure Seal Bonnet Flexible Wedge Full Port Outside Screw and Yoke (OS&Y), Rising Stem Extended Bonnet For Cryogenic Services Locking Device Optional By pass on Request
Valve Type FORGED GATE VALVE - SE / SW / BW Design Std BS EN ISO 15761 [BS 5352] / API 602 / ASME B 16.34 Size Range 15 DN to 50 DN [ 1/2 to 2] Body [ASTM A 105 ] [ASTM A 182 - F 304 / F 316 / F 11 / F 22] Trim AISI 410 / 304 / 316 Seat / Wedge 13% Cr. Steel / AISI 410 / 304 / 316 Design Features Bolted Bonnet, OS & YT, Solid Gate, HW operated Pr.Rating ASME Class 800 End Connection Screwed ASME Class 800 NPT ASME B1.20.1 Socket Weld ASME Class 800 Butt Weld ASME B16.25 Testing Std. BS EN 12266 -1 [BS 6755-1] / API 598 Optional Stellite Hard facing, Extended Bonnet
Valve Type CS / SS GATE VALVE - FL / BW Design Std BS EN ISO 10434 [BS 1414] / API 600 / API 602 / API 603/ASME B16.34 Size Range 40 DN to 400 DN [1 1/2 to 16] Body [CS - ASTM A 216 Gr. WCB] [SS - ASTM A 351 Gr.CF8 / CF8M] Trim AISI 410 / 304 / 316 Seat / Wedge 13% Cr. Steel / AISI 410 / 304 / 316 Design Features Bolted Bonnet, OS & YT, HW & Gear operated Pr.Rating ASME - Class 150 / 300 / 600 Face to Face ASME B 16.10 / EN 558 -1 / API 6D End Connection Flanged ASME B16.5, CLASS 150 / 300 / 600 Butt weld ASME B16.25 Testing Std. BS EN 12266 - 1 [BS 6755-1] / API 598 Optional IBR / Extended Bonnet for low Temp. / Lantern Ring / indicator & Locking Device/ Renewable Seat / Stellite Hard facing / Jacketed Provision / RTJ Flanges / By Pass Arrangement / Higher Sizes / Special MOC: Austenitic and Duplex Stainless Steels
Specialityvalve is one of the top notch Pneumatic Knife Gate Valve Manufacturer in India. The Pneumatic Knife Gate Valve has a blade to cut through the clogging of heavy liquids. The valve is used in a lots of processing plants and it comes in larger sizes which makes them easier to handle. The Pneumatic Knife Gate valves are mostly used to shut off fluid flow in a fully open position, provide full flow. It is used in industries which deals with fluids. This pneumatic knife gate valve is operated automatically, using an actuator. Types of Pneumatic knife gate valve:- Pneumatic Bidirectional knife gate valvePneumatic Unidirectional knife gate valve Pneumatic Knife Gate Valve are used in industries such as: Chemical industry Refineries Mining and Mineral process Power Plant Cement Industry Description:- Materials: Cast Iron , Ductile Iron, CF8M, CF8, SS316, SS304 CF3M, WCB. Ends: Wafer, Lug, Flanged Size: 2 to 80 Class: 150 to 600 Pressure: PN 100 PN 450 Operations: Pneumatic Actuated Configuration for pneumatic actuators: Pneumatic single acting actuators Pneumatic double acting actuators Pneumatic rotary actuators Pneumatic Scotch and Yoke actuators Pressure: 25 bar Temperature: Standard -4F to 200F (-20C to 93C) Low -40F to 176 F (-40C to 80C) High 0F to 300�°F (-18C to 149C) Looking for the best Pneumatic Knife Gate Valve? Specialityvalve is the best Pneumatic Knife Gate Valve Manufacturer in India. Here we supply valves to our clients globally. We provide customized valves of the best quality and it is cost-effective. Our company main aim is quality, safety, and reliability of our products. Our valves are manufactured using best quality materials in our advanced manufacturing unit.
Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-1 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Flanges as per IS:778 Class-1 F.F. undrilled Testing & Certification Body Test Pressure : 1.5 MPa Hyd. Seat & Back Seat Test Pressure : 1.0 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-1 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 1.5 MPa Hyd. Seat & Back Seat Test Pressure : 1.0 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-1 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 1.5 MPa Hyd. Seat & Back Seat Test Pressure : 1.0 MPa Hyd. Max Working Temperature: 45C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-1 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Flanges as per IS:778 Class-1 F.F. undrilled Testing & Certification Body Test Pressure : 1.5 MPa Hyd. Seat & Back Seat Test Pressure : 1.0 MPa Hyd. Max Working Temperature: 45' C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-2 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 2.4 MPa Hyd. Seat & Back Seat Test Pressure : 1.6 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product Description Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-2 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Flanges as per IS:778 Class-2 F.F. undrilled Testing & Certification Body Test Pressure : 2.4 MPa Hyd. Seat & Back Seat Test Pressure : 1.6 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product :Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-2 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 2.4 MPa Hyd. Seat & Back Seat Test Pressure : 1.6 MPa Hyd. Max Working Temperature: 45C Our Worksâ?? Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product : Gun Metal Gate Valve Product Standard : IS-778 Pressure/Class/Rating : Class-2 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Flanges as per IS:778 Class-2 F.F. undrilled Testing & Certification Body Test Pressure : 2.4 MPa Hyd. Seat & Back Seat Test Pressure : 1.6 MPa Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
Product : Gun Metal Gate Valve Product Standard : IS-778:1971 Pressure/Class/Rating : Class-3 Body Material cum Standard : GM ( IS:318 Gr.LTB2 ) Description : Screwed in Bonnet, Inside Screw, Non-Rising Stem Type of Seat : Integral seat Type of Wedge : Solid wedge Trim : Cu-Alloy Gland Packing : PTFE End Details : Screwed female threads to IS:554 Parallel Testing & Certification Body Test Pressure : 50 Kg/cm Hyd. Seat & Back Seat Test Pressure : 40 Kg/cm Hyd. Max Working Temperature: 45 C Our Works Test Certificate is furnished with every supply. (APS Marines & Logistics)
API Spec 6A 3-1/8" 5000Psi Hydraulic Gate Valve Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is used for drilling fluid manifold, choke manifold, kill manifold and Christmas tree etc. The plate gate valve is the main component of the Christmas tree, the tubing head, the casing head and the manifolds. It is one of the major products manufactured by YYPMC. In recent years, by making use of advanced technology both at home and aboard, YYPMC has developed an innovated quite a few new designs of the value in terms of products structure and material selection. The products are all manufactured, checked and accepted as per API Spec 6A standard.
API Spec 6A 3-1/8" 5000Psi Hydraulic Gate Valve Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is used for drilling fluid manifold, choke manifold, kill manifold and Christmas tree etc. The plate gate valve is the main component of the Christmas tree, the tubing head, the casing head and the manifolds. It is one of the major products manufactured by YYPMC. In recent years, by making use of advanced technology both at home and aboard, YYPMC has developed an innovated quite a few new designs of the value in terms of products structure and material selection. The products are all manufactured, checked and accepted as per API Spec 6A standard.
API Spec 6A 3-1/8" 5000Psi Hydraulic Gate Valve Gate Valve is used to open or close the pipeline. According to the structure, the gate valves is distributed into rising or non-rising stem gate valve. According to the mode of operation, it is distributed into manual or hydraulic etc. The gate valve is used for drilling fluid manifold, choke manifold, kill manifold and Christmas tree etc. The plate gate valve is the main component of the Christmas tree, the tubing head, the casing head and the manifolds. It is one of the major products manufactured by YYPMC. In recent years, by making use of advanced technology both at home and aboard, YYPMC has developed an innovated quite a few new designs of the value in terms of products structure and material selection. The products are all manufactured, checked and accepted as per API Spec 6A standard.
Cameron API 6A gate valve accessories gatestem seatShould any of these items be of interest to you,
Ceramic Knife Gate Valve FREE-Valves Ceramic Knife Gate Valves are known as slurry gate valves. Its have simple structure and can cut off medium which contains solid particles and fibers, but for some very hard particles or serious erosive mediums, general metal seated knife gate valves will be washed out easily, so ceramic knife gate valves are very suitable for those mediums containing fibers and hard solid particles. Features: 1) Short length of structuresaving matrial lightweight easy to installsmall space occupation. 2) Seat is designed with single seat type to prevent sticking and accumulation of ash residue. 3) The sealing surface is made of structure ceramic with abrasion resistance and long service life. Technical Specification: 1) Size Range: NPS2~NPS24,DN50DN600 2) Pressure Range: Class 150 /PN6/PN10 3) Applicable Temperature.: 0200 4) Connection T ype: Fl ange , wafer 5) Sealing material: engineering ceramics 6) Body Material: WCB, CF8, CF8M, CF3M 7) Pressure test:GB/T13927, API598 8) Face to Face: GB/T12221, API609 9) Valve body : GB/T12224,ASME B16.34 Operating Mode:Manual/Electric/Pneumatic Application: FREE-Valve's Ceramic Knife Gate Valves are suitable for the conveying system with liquid-solid or gas -solid two-phrase medium , such as ash, mine residue and coal residue in iron and steel plant or ash conveying system of power plant , paper pulp in paper industry, sewage and slurry in decontamination plant ,especially useful for the heavy medium system of coal mill.
Standard Flanged Cast Iron Non-rising Stem Gate valves (We also manufact API and BS standard) Design:Din 3352-F4 Size:DN 50-1200,Pn10/16/25 Material:Body&Bonnet: GGG40/50; Stem:2Cr13; Disk:Ductile iron with NBR/EPDM. Epoxy powder inside and surface Packaing:Sandwich Case, Paper sheet for each Valves. Payments:L/C;T/T(30% advanced,70% before shipping) Delievery time:25-40Days(Based on final quantity) Warranty time:12Months