Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX200 6.5hp Displacement: 196 (cc) Bore Ã? Stroke: 68mm Ã? 54mm Rated Power Output: 5.5HP (4.0)KW / 3600rpm Max. Power Output : 6.5HP (4.8)KW / 3600rpm Torque (N.M): 13 / 2500 Compression Ratio: 8.5 : 1 Fuel Tank Capacity: 3.6 (L) Engine Oil Capacity: 0.6 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 15 / 17 Dimension (LÃ?WÃ?H): 400 Ã? 370 Ã? 375 20FT (set): 520
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX160 5.5hp Displacement: 163 (cc) Bore Stroke: 68mm 45mm Rated Power Output: 4.6HP (3.4)KW / 3600rpm Max. Power Output : 5.5HP (4.0)KW / 3600rpm Torque (N.M): 11 / 2500 Compression Ratio: 8.5 : 1 Fuel Tank Capacity: 3.6 (L) Engine Oil Capacity: 0.6 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 15 / 17 Dimension (LWH): 400 370 375 20FT (set): 520
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX240 8hp Displacement: 242 (cc) Bore Stroke: 73mm 58mm Rated Power Output: 7.0HP (5.1)KW / 3600rpm Max. Power Output : 8.0HP (5.9)KW / 3600rpm Torque (N.M): 14.5 / 2500 Compression Ratio: 8.2 : 1 Fuel Tank Capacity: 6.0 (L) Engine Oil Capacity: 1.1 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 25 / 27 Dimension (LWH): 490 430 500 20FT (set): 236
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX340 11hp Displacement: 337 (cc) Bore Stroke: 82mm 64mm Rated Power Output: 8.6HP (6.3)KW / 3600rpm Max. Power Output : 11.0HP (8.1)KW / 3600rpm Torque (N.M): 20 / 2500 Compression Ratio: 8.0 : 1 Fuel Tank Capacity: 6.5 (L) Engine Oil Capacity: 1.1 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 31 / 33 Dimension (LÃ?WÃ?H): 490 430 510 20FT (set): 236
Single cylinder, forced air cooling,4-stroke gasoline engine Model: GX390 13hp Displacement: 389 (cc) Bore Stroke: 88mm 64mm Rated Power Output: 10.0HP (7.35)KW / 3600rpm Max. Power Output : 13.0HP (9.6)KW / 3600rpm Torque (N.M): 23 / 2500 Compression Ratio: 8.0 : 1 Fuel Tank Capacity: 6.5 (L) Engine Oil Capacity: 1.1 (L) Engine Type: Forced Air-Cooled, 4 Stroke, Single Cylinder Ignition System: Transistor Magneto Starting System: Recoil Start N.W. / G.W. (KG): 31 / 33 Dimension (LWH): 490 430 510 20FT (set): 236
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
Product characteristics: 1.Superlubrication Lift engine power more than 12%! The graphene in the lubricating oil has ultra-thin and ultra-hard characteristics. The friction between the graphene replaces the friction on the metal surface of the engine, greatly reduces the friction loss, the engine runs smoothly, ensures the maximum output of power, and increases the engine power by more than 12%. 2.The ultimate wear resistance Save fuel up to 15%! The lubricating oil with graphene additive is stably dispersed in the lubricating oil by surface modification technology to form the effect of reducing friction. It has the excellent antifriction lubrication performance of both dry and wet friction, which can greatly reduce the friction loss and save the fuel consumption by up to 15%. 3.Shock absorption and noise reduction Effectively reduce noise by more than 6%! The lubricating property can be greatly improved, the mechanical friction sound and the loss are reduced to a greater extent, the problems of engine surge and knocking are reduced, and the noise is reduced. 4.Deep repair Effectively repair engine wear, prolong engine life by 2 times! Graphene carburizing technology can repair the uneven surface of engine metal cylinder wall. Graphene can be coated on engine metal surface at high temperature and high pressure, fill the gap on engine metal surface, repair engine wear and prolong engine life by 2 times. 5.Cleaning and energy saving Remove more than 85% of oil mud carbon, reduce the number of engine cleaning! The addition of graphene additive can enhance the cleanliness of the engine, effectively remove 85% of the sediment such as oil mud carbon deposition, reduce the number of engine cleaning and reduce the maintenance cost. 6.Extension period Extend the oil exchange cycle by more than double. Graphene oil has a good cleaning function by making use of the inertia of chemical reaction between graphene and strong acid and strong alkali, so as to protect the wear and oil cleaning of engine parts and prolong the oil exchange cycle more than twice. 7.Green environmental protection CO (carbon monoxide) emissions decreased by 90% . The harmful gas in the automobile exhaust emission is mainly caused by the incomplete combustion of the gasoline, and the CO is the main emission reduction target. After the addition of the graphene lubricating oil, the combustion efficiency can be effectively improved, and the CO emission can be reduced by 90%.
1.The brief introductions of gasoline engine water well drilling rig ·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance. ·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced. ·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors. ·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well. 2 .The features of the gasoline engine water well drilling rig The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on. The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg. Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
1.Brief introduction of QZ-2B gasoline engine sampling drilling rig QZ-2B gasoline engine sampling drilling rig is produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for geological industrial and civil buildings, bridges, railway, highway, hydro-power industry survey, geophysical exploration, advanced drilling and grouting hole drilling, embedded hole guiding, broken hole, hole and small household wells check out. QZ-2B gasoline engine sampling drilling rig has the following features: compact structure, small volume, light weight, two gears, easy to move. 2. Technical parameters of QZ-2B gasoline engine sampling drilling rig QZ-2B gasoline engine sampling drilling rig Bottom hole diameter (mm) 32-91 Drilling depthm soil 9110-15m stone915-10m stone7510-15m stone6015-20m stone4620-25m Drilling pipe (mm) 28 Rotating speedr/min 200-570 Torquen.m 110 Gasoline engine house power(hp 5 (3.5kw) displacementcc 196 Dimensionl*w*h 600*450*1900 Weightkg 90 3.Configuration list of QZ-2B gasoline engine sampling drilling rig Item Parameter Unit Quantity Gasoline engine sampling drilling rig QZ-2B set 1 Drilling pipe 28*1500 pc 6 Drilling pipe 28*800 pc 8 Pipe joint 35 pc 14 Reducing nipple 45/35 pc 1 Core barrel 45*800 pc 1 Alloy bit 46 pc 1 Reducing nipple 58/35 pc 1 Core barrel 58*800 pc 1 Alloy bit 60 pc 1 Three-wing bit 60 pc 1 Safety clamp hold 1 Water seal 30*50*10 pc 4 Oil seal 30*50*10 Oil seal 17*50*10 Control wheel pc 1
1. Purpose of HZQ-20 gasoline engine concrete core drilling rig HZQ-20 gasoline engine concrete core drilling rig adopts high-speed cutting technology and is matched with thin-walled diamond drills. It is widely used in drilling and coring in engineering construction, municipal engineering, equipment installation engineering and building quality inspection. On the concrete, asphalt pavement and limestone roads such as highways, airports, ports and dams, the cores are subjected to compression and flexural tests. The coring and open hole is used to drill anchor bolt hole for large-scale machine equipment, and bridge handrails and traffic safety protection. 2. Features of HZQ-20 gasoline engine concrete core drilling rig Double column structure and spiral feeding mode are adopted with good stability and simple operation and labor saving. The rig is equipped with wheel, which is easy to move. The use of high-speed cutting technology and thin-wall diamond drill supporting can drill and cut high strength reinforced concrete with high drilling efficiency, accurate hole location, hole wall smooth, good hole quality, complete core smooth, small vibration, no damage to the building. 3.Parameters of HZQ-20 gasoline engine concrete core drilling rig ·Drilling diameter: 200mm (if larger hole size is needed, please specify) ·Drilling depth: 700mm (greater depth can be drilled with connecting rod or extended mandrel) ·Engine: gasoline engine ·Power: 5.5 HP, 9.0 HP, 13 HP and 20 HP ·Output speed: 800-1500 RPM ·Weight: 180KG Shandong Master Machinery Group specializes in the supplying of concrete drilling and coring machine. The main models are HZQ-20 gasoline engine concrete core drilling rig, HZC-20 diesel engine concrete core drilling rig, HZQ-20T towed concrete core drilling rig.
4stroke petrol engine shoulder brush cutter Discharging capacity 37.7cc Max.Power 1.4hp Blade length 255mm Nylon head cutting width:415mm Net weight:7.5kg 1*20 feet container load about 300pcs
* HONDA / YAMAHA Gasoline engine powered, no need electricity. * 4HP 3000w powerful petrol motor * Pressure adjustabel from 0 to Max 250bar / 3650psi * Nozzle size: 0.013í¦, 0.015", 0.017", 0.019", 0.021", 0.023", 0.025, 0.027", 0.029 " (513,515,517,519, 521, 523, 525, 527, 529 airless tips etc) * Max. airless tip size: 0.031" (531 airless tip) * Paint Delivery: 4.5 L / min * For Paint viscosity: medium to high viscosity, less than 150s * Length of high pressure hose in the package:15M * Maximum length of the hose: 90 meters * Working pressure for hose: 250bar * Burst pressure for hose: 800bar. * Weight: G.W.: 55KGS; N.W.: 52KGS * Wooden case dimensions: 77x61x66cm.
* HONDA / YAMAHA Gasoline engine powered, no need electricity. * 4HP 3000w powerful petrol motor * Pressure adjustabel from 0 to Max 250bar / 3650psi * Nozzle size: 0.013í¦, 0.015", 0.017", 0.019", 0.021", 0.023", 0.025, 0.027", 0.029 " (513,515,517,519, 521, 523, 525, 527, 529 airless tips etc) * Max. airless tip size: 0.031" (531 airless tip) * Paint Delivery: 4.5 L / min * For Paint viscosity: medium to high viscosity, less than 150s * Length of high pressure hose in the package:15M * Maximum length of the hose: 90 meters * Working pressure for hose: 250bar * Burst pressure for hose: 800bar. * Weight: G.W.: 55KGS; N.W.: 52KGS * Wooden case dimensions: 77x61x66cm.
1.The brief introductions of gasoline engine water well drilling rig ·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance. ·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced. ·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors. ·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well. 2 .The features of the gasoline engine water well drilling rig The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on. The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg. Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
1.Brief introduction of QZ-2B gasoline engine sampling drilling rig QZ-2B gasoline engine sampling drilling rig is produced by Shandong Master Machinery Group Co.,Ltd. It is suitable for geological industrial and civil buildings, bridges, railway, highway, hydro-power industry survey, geophysical exploration, advanced drilling and grouting hole drilling, embedded hole guiding, broken hole, hole and small household wells check out. QZ-2B gasoline engine sampling drilling rig has the following features: compact structure, small volume, light weight, two gears, easy to move. 2. Technical parameters of QZ-2B gasoline engine sampling drilling rig QZ-2B gasoline engine sampling drilling rig Bottom hole diameter (mm) 32-91 Drilling depthm soil9110-15m stoneÏ?915-10m stoneÏ?7510-15m stoneÏ?6015-20m stoneÏ?4620-25m Drilling pipe (mm) 28 Rotating speedr/min 200-570 Torquen.m 110 Gasoline engine house power(hp 5 (3.5kw) displacementcc 196 Dimensionl*w*h 600*450*1900 Weightkg 90 3.Configuration list of QZ-2B gasoline engine sampling drilling rig Item Parameter Unit Quantity Gasoline engine sampling drilling rig QZ-2B set 1 Drilling pipe 28*1500 pc 6 Drilling pipe 28*800 pc 8 Pipe joint 35 pc 14 Reducing nipple 45/35 pc 1 Core barrel 45*800 pc 1 Alloy bit 46 pc 1 Reducing nipple 58/35 pc 1 Core barrel 58*800 pc 1 Alloy bit 60 pc 1 Three-wing bit 60 pc 1 Safety clamp hold 1 Water seal 30*50*10 pc 4 Oil seal 30*50*10 Oil seal 17*50*10 Control wheel pc 1 If you need a wooden base, a high pressure pump and a high pressure water pipe, please specify.
1.The brief introductions of gasoline engine water well drilling rig ·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance. ·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced. ·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors. ·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well. 2 .The features of the gasoline engine water well drilling rig The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on. The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg. Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
1.The brief introductions of gasoline engine water well drilling rig ·This gasoline engine water well drilling rig is an ideal tool for drilling families, wells, air conditioning wells and vegetable garden wells, and is an ideal tool for workers engaged in well drilling and reconnaissance. ·Diversification equipped with power: gasoline engine can be used as power, or single-phase electric and three-phase electric power can be replaced. ·Wide range of adaptation: because the floor area is less than 1 square meters, the height can be controlled around 2.6 meters, so it can be used in the field or indoors. ·It is widely used: it can not only drill holes in the drill pipe, but also use the center tube to sample. It can also use positive and negative circulation water to do well. 2 .The features of the gasoline engine water well drilling rig The gasoline engine water well drilling rig consists of gasoline engine, reducer, belt, seat, movable pulley, wire rope, pipe pliers, pulling device, bit broken soil, sealing water gourd, drop box, landing card, pump, water pipe and so on. The volume of the gasoline engine water well drilling rig is 1*0.7 *0.4m, and the portal frame bar is 2.6 meters high. The total weight is about 150 kilograms. The head of the main engine (including gasoline engine, reducer, water hyacinth and frame) weighs about 50 kilograms, the chassis is 35 kg, the portal frame rod is 17 kg, the drill rod is 3 kg / m, and the other is about 30 kg. Diameter 28 drill pipe, recommended opening diameter of 120 millimeters, 80 meters deep, the deepest record 100 meters (different soil and water pump, the effect is different). The 34 drill pipe recommends the maximum opening diameter 160 millimeter, the depth is 30 meters. It can be drilled into 10-20 meters in one hour, and 2-3 cents per meter.
