OMGA-2000 Flue Gas Analyzer is a highly integrated single-flange gas monitoring equipment, of which, core detection module adopts A nondispersive infrared (NDIR) and Differential Optical Absorption Spectroscopy (DOAS) gas absorption technology with independent intellectual property rights. FEATURES : Filter elements can be easily disassembled and replaced Adopt a single flange design with high integration and easy installation
FDR-4291 Calorific value of gas analyzer Scope The instrument is suitable for steel, iron alloy, sponge iron smelting process of gas analysis (including blast furnace, converter, coke oven, heat treatment, gas stove, calcium carbide furnace), cement kiln smoke gas composition measurement (flue gas oxygen, Excess coefficient), gas analysis of straw biomass gasification process (gas concentration, calorific value monitoring), heat recovery during gas recovery and utilization, and environmental protection during industrial gas application. Features 1, NDIR gas sensors with patented technology 2, simultaneous measurement of CH4, the concentration of the two gas components CnHm 3, CnHm no effect on the results of CH4, no mutual interference between the gas. 4, automatic calculation of the calorific value of the gas 5, built-in import sampling pump, automatic zero calibration 6, the configuration 320 x 240 LCD display, standard RS232 digital output 7, easily applied gas composition analysis industrial site in different places Technical Parameters 1, measurement methods: CH4 / CnHm: NDIR 2. Range: CH4: 0-100% CnHm: 0-10% 3. Resolution: CH4 / CnHm: 0.01% 4, Accuracy: CH4 / CnHm: 1% FS
Oil and Gas.Imports
SG700 Series of Stack Gas Analyzing Systems consist of an infrared gas analyzer, a zirconia oxygen analyzer and a sampling unit. The SG700 Series can simultaneously measure up to five components: sulfur dioxide (SO2), nitrogen oxides (NOx),carbon monoxide (CO), carbon dioxide (CO2) and oxygen(O2). Features 1. Simultaneously measure up to five gas components: 2. Minimize interaction between gases; 3. Reliable zirconia oxygen analyzer; 4. A wealth of functions, including self-diagnostic functions which enhance reliability; 5. Wide dynamic range.
Sv-5q automobile tail gas analyzer 1. Measurement range: co: 0-10.0 10-2(%) Co2 : 0-20.0 10-2 (%) Hc: 0-10000 10-6 (ppm) O2 : 0-25.0 10-2 (%) No: 0-5000 10-6(ppm) Petrol temperature: 18f¦-150f¦ Engine speed: 100-20000rpm 2. Repetitiveness: f_f+2% 3. Zero point floating: co:f+0.06 10-2(%)/1h Co2: f+0.5 10-2(%)/1h Hc:f+30 10-6(ppm)/1h O2: f+0.5 10-2(%)/1h No: f+30 10-6(ppm)/1h 4. Crossing floating: not over the permitted indicated error range (1hour) 5. Indicated error: co: f+5%(relative error: 0-10%) Co2: f+5%(relative error: 0-20%) Hc:f+5%(relative error: 0-4000ppm) f+10%(relative error: 4001-10000ppm) O2: f+5%(relative error: 0-25%) No: f+5%(relative error: 0-5000ppm) 6. Environmental condition: petrol temperature: f+2f¦(relative error) Engine speed: f+1.0%(relative error) Temperature: 0f¦-40f¦ Humidity: f_80% Atmospheric pressure: 60-105kpa Power: ac 220vf+10%, 50hzf+1hz 7. Preheat time: 10 minutes 8. Method of sample taking: Tail gas: taking directly, and the length of sample pipe and probe are 5m and 900mm Petrol temperature: put the probe into the hole of lubricating oil gauge of engine, and the length of probing is the length of oil gauge. Then seal it with stopper in order to avoid the leakage of oil. The pipe length is 5m Engine speed: the result is available at the point no more than 20cm from the high voltage coil of engine 9. Display method: lcd large screen display 10. Optional configuration: gas temperature and engine speed 11. Main features: built-in printer, and computer network communications, 30 minutes automatically suggest zero. Idle and idle-two measurement methods, plates imported functional group can store 500 measurements, natural gas, liquefied petroleum gas and petrol fuel three choices. Carton
The testo 300 flue gas analyzer is ideal for the most important measurements involving heating systems. It combines decades of experience in measuring technology with contemporary smart-touch operation, robust construction and e-mailing of reports. The testo 300 enables easy measurement of flue gas, draught, pressure, ambient CO and differential temperature. â?¢ Intuitive measurement menus and the fast-response Smart-Touch display ensure easy operation â?? as on your smartphone â?¢ Including O2 and CO sensor up to 4,000 ppm â?¢ Large 5-inch HD display â?? see all the system's measuring values at a glance â?¢ Creation of documentation directly on site and e-mailing of reports Rs 94,452.00
I. Introduction SS-UV-300 flue gas analyzer (low emission monitoring) based on years of experience in research and development of flue gas analyzer, combined with the field practice of nearly ten thousand successful application cases. A number of techniques of the flue gas analyzer (standard form) are upgraded (many times return room to increase gas absorption optical path, and higher accuracy of spectrometer, convection heat transfer core module temperature control, etc.). The analyzer is based on DOAS and chemometric algorithms (PLS), able to measure concentration of gases including SO2, NO2, NO, O2, NH3, Cl2, O3, H2S, CH3I, etc. It has features of high measure accuracy, outstanding reliability, fast response time and wide applicable scope. All indexes reach or exceed those of domestic & foreign similar products, and fully qualify measurement technology index of low emission monitoring occasions. II. Application fields It mainly used for industrial boilers, industrial furnaces emissions monitoring in power plant, iron & steel factory, cement plant and son. III. Specifications Model Standard Low Emission Ultra-low Emission Range 0-300-3000ppm 0-100-300ppm 0-20-100ppm Linearity ±1.5%F.S. Repeatability ±0.5%F.S. Zero Drift ±2%F.S/7d Span Drift ±2%F.S/7d Response time(T90) 10S 30S 30S Working Temp -10-+40 Preheating time No preheating Approx.10 min Sample Gas Interface 6 Sample Gas Flow 0.5-2L/minFluctuation
I. Introduction The analyzer is based on NDIR (Non-dispersive Infrared) technology able to measure concentration of gases including CO,CH4,CO2,SO2,NO etc. It has features of high measure accuracy, outstanding reliability, fast response time and wide applicable scope. All indexes reach or exceed those of domestic & foreign similar products, and fully qualify measurement technology index of low emission monitoring occasions. II. Application fields It mainly used for industrial boilers, industrial furnaces emissions monitoring in power plant, iron & steel factory, cement plant and son.
Winner319A Industrial Spray Particle Size Analyzer Winner319A is a desktop spray laser particle size analyzer specially designed and developed for droplet size testing. The instrument adopts the principle of Fraunhofer diffraction and the parallel optical path design of high-performance and high-power lasers, which can meet the requirements of droplet testing. And the test range can be adjusted according to customer requirements.
Gas detectors for home, industrial and portable use.Distribution for gas detectors
Gas analyzer, engine analyzer, lux meter, opacity meter, speed radar and other automotive diagnostic equipments.After sales service
Gas meter and accessories.
Gas detector, moisture indicator, gas sampling system, automation control panel.
Domestic LPG gas detector, commercial LPG gas detector.
Gas analyzer, gas sample handling system, valve, flowmeter, filter.
Gas detectors, breathing apparatus, smoke detectors, heat detectors.
Gas genrators, gas CHPs, cogeneration, micro CHPs.
Gas detectors.
Gas meters, regulators, leak detectors, pipeline products.
Gas detector, gas monitor, combustible gas detector, toxic gas detector, gas alarm controller, portable gas detector, industrial gas detector, leakage searching devices, gas analyses, leakage meters, gas leak detection.
