KEY ADVANTAGES OF OUR FRP VESSELS- Pressure sustaining of 12 bar:- 100% of the vessels are tested for sustaining pressure up to 12 bar. Vaccume sustaining of 5mm hg negative pressure:- The pressure vessel is designed for maximum negative pressure of 5â?? hg vacuum below atmospheric pressure. Aluminum thread:- Aluminum threads provides a huge advantage over plastic threads, due to harmonic action by pump, sometimes, in longer run, plastic threads gets damaged. But our vessels has aluminum thread so it gives a great grip and solidity also it is very efficient for longer run than plastic thread. CAPACITY OPTIONS- 451 Litres, 708 Litres, 999 Litres, 1306 Litres. DIMENSIONS OPTIONS- 24 inch X 72 inch, 30 inch X 72 inch, 36 inch X 72 inch, 42 inch X 72 Inch. OPENINGS- 4 inch OPENING (TOP & BOTTOM). COLOR OPTIONS- Blue, Natural, Green.
KEY ADVANTAGES OF OUT FRP VESSELS- Pressure sustaining of 12 bar:- 100% of the vessels are tested for sustaining pressure up to 12 bar. Vaccume sustaining of 5mm hg negative pressure:- The pressure vessel is designed for maximum negative pressure of 5â?? hg vacuum below atmospheric pressure. Aluminum thread:- Aluminum threads provides a huge advantage over plastic threads, due to harmonic action by pump, sometimes, in longer run, plastic threads gets damaged. But our vessels has aluminum thread so it gives a great grip and solidity also it is very efficient for longer run than plastic thread. CAPACITY- 451 Litres, 708 Litres, 999 Litres, 1306 Litres. DIMENSIONS- 24 inch X 72 inch, 30 inch X 72 inch, 36 inch X 72 inch, 42 inch X 72 Inch. OPENINGS- 4 inch OPENING (TOP & BOTTOM). COLOR OPTIONS- Blue, Natural, Green.
KEY ADVANTAGWE OF OUR FRP VESSELS- Pressure sustaining of 12 bar:- 100% of the vessels are tested for sustaining pressure up to 12 bar. Vaccume sustaining of 5mm hg negative pressure:- The pressure vessel is designed for maximum negative pressure of 5â?? hg vacuum below atmospheric pressure. Aluminum thread:- Aluminum threads provides a huge advantage over plastic threads, due to harmonic action by pump, sometimes, in longer run, plastic threads gets damaged. But our vessels has aluminum thread so it gives a great grip and solidity also it is very efficient for longer run than plastic thread. CAPACITY- 451 Litres, 708 Litres, 999 Litres, 1306 Litres. DIMENSIONS- 24 inch X 72 inch, 30 inch X 72 inch, 36 inch X 72 inch, 42 inch X 72 Inch. OPENING- 4 inch OPENING (TOP & BOTTOM). COLOR- Blue, Natural, Green.
Vertical vessel: Diameter 1m-4m, capacity 1m3- 200m3, all kinds of equipment can be tailored fabricated. Application: Acid proof tank (tank for HCL, H2SO4, phosphoric acid, nitric acid, organic acid, Â fluosilicic acid,hydrofluoric acid etc.) Alkali proof tank, Brine tank, sewage tank, FRP/PVC, FRP/PP composite tank. Standard: EN 13121-3, BS 4994-1997, ASTM D-3299
4 Inch End Entry frp pressure vessels R40E300 Rohone ® frp membrane housing pressure vessels 4" End Entry Design Available in 300 psi pressure rating only! Accommodates standard make 4" Membrane Element Element length: 40" x (1-4) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ISO9001, ISO14001, UL/NSF 4 Inch End Entry frp pressure vessels Specification Rohone ® frp membrane housing pressure vessels 4" End Entry Design Available in 300 psi pressure rating only! Accommodates standard make 4" Membrane Element Element length: 40" x (1-4) Applicable to: DOW, HYDRANAUTICS, OSMONICS, KOCH, TORAY, CSM, VONTRON, BDX, etc. Standard: ISO9001, ISO14001, UL/NSF 4 Inch End Entry frp ro membrane housings Key Features: Operating Temp Range: -10°C ---49°C Internal permeate port not to exceed 125PSI(0.88MPa) Operating pH Range: 3 - 11 Cleaning pH Range: 2 - 12 (less than 30 minutes) Mirror inner wall and brightly surface. Multi-ports option White color is as standard. Customized colors are also available. ASME un-coded economy series for saving low pressure ro system cost Quality Assurance Hydro-static Leakage Test Pressure: Standard: 100% test, not sampling ? 100,000 times cycle test ? Burst test with 3-4 times of its operating pressure (wall thickness thinner for saving cost) ? 100% QA test with 1.1x design hydraulic pressure. ASME: 1.1x Design Pressure ? 100% QA inspection and cleaning before final packaging and delivery to customers. ? Submitted for NSF standard 61 4 Inch End Entry frp membrane housings Applications: Rohone ® FRP membrane housing pressure vessels are widely used for low pressure 300Psi ro systems in industrial waste water treatment, seawater desalination, brackish water desalination, RO system for electronics, electric power, food & beverage, metallurgy, chemical, pharmaceutical and other fields.
Compared with Iron & steel Tanks Lighter (Only1/4 of Iron and Steel¡¡¥s density) Mechanical Properties is better Better Performance on Resistance of corrosion Inside surface is easy to clean Easy to be maintained
The manufacture capacity per year for tank is 10000 tons and pipe is 20000tons, the max. Specification for tank is dn25000mm and pipe¡¯s specification is dn15mm-dn2000. The products can be strictly manufactured according to standards as din, astm, asme, en, etc. Our company and hundreds of staff are fully committed to serve our clients with traditional and innovative solutions in the demand for storage and transportation of fluids.
FRP vertical vessel.
7 elements 1200 psi Temperature range: -10C to +50C Manufacturer: ROPV Feed stroke concentrate ports end connection (super duplex)
"GRP Food Grade Vessel Adopting computer controlled filament winding technology, FRP storage tank and brewing tank in food grade based on food grade resin matrix are safe and hygienic without toxicity and taste, which ensures the sanitation requirement of products. It is applied in food storage and transportation of sauce, vinegar and others through selection of food grade resin and strict post process techniques. Adding exterior insulation layer while manufacturing helps improve its insulation efficiency and maintain its necessary temperature during sauce fermentation. Main characteristicsAre as follows: 1. Excellent physical property its density is 1.8-2.1, being equal to 1/4-1/5 of steel; and its specific strength is higher than steel, cast iron and plastic. Its thermal expansion coefficient is approximately the same with steel; while its thermal conductivity is only 0.5% of steel; 2. Flexible design ability and excellent structural property of tank wall enable its constituent materials to fully display and to be selected reasonably; 3. Smooth and clean surface which can be washed easily; 4. against animalcule corrosion; 5. without toxicity and taste; 6. Low conductivity coefficient which can effectively maintain constant temperature; 7. Good low temperature resistant property; 8. Long operate life; 9. the insulation layer can be manufactured and the heating and cooling equipment can be added on the tank as per the requirement of clients. Application areas: 1.Vinegar, sauce and acidic food vessel; 2.Food fermentation tank; 3.Solarization vat; 4.Inebriant, alcohols and fatty food vessel; 5.Chloric drinking water tank and water tank for life; 6.Super-pure water tank."
1054, 1354, 1465, 1865, ......4872 all sizes. color in blue, nature, black, grey etc.,
Frp fishing vessels, frp leisure boats, diverse type of frp ships.
Frp boats, pilot/ security, ferry boats, pontoon boats, sail boats and house boat/ cruiser, luxury yatchs..
Product Range Design Code ASME Section VIII, Div I, PD 5500, AD Merkblatter, PED 97/23/EC, IS 2825 or any other international standard. Capacity Upto 500 M3 ( 5,00,000 Liters water volume) Diameter Upto 6 meters Shell & Dished End Thickness Upto 100 mm or more Weight Upto 250 tons Length Upto 60 meters, with suitable field joints. Material of Construction Carbon Steel, LTCS, NACE & HIC resistant Material, Low Alloy Steel for high temperature service (SA 387 Gr 11 and Gr 22), Cladded Steel (CS with SS, Cupronickel, Aluminum Nickel Bronze, Aluminum brass, Titanium, Inconel and many more), SS (300 & 400 series), Duplex & Super Duplex stainless steel, Cupronickel, Monel , Inconel, Nickel & Nickel Alloys, Hastelloy, Titanium, Aluminum & Aluminum alloys.
FRP vessels, boiler pressure parts.Manufacturers
Inflatable Boats,Rib Boats,Fiberglass Fishing Boats FRP panga boat fiberglass hull material, centre console and cabin speed boat 980cm business boat for leisure for passanger for transport... Name Specification Boat Materials Fiberglass Boat size 9.8m*2.81m*1.26m Max people 11+1 Engine outboard 115 x 2 Waterline 0.45m speed 50km/h Professional manufacture, and export RIB boats, inflatable boats, fiberglass fishing boats and rescue boats, fishing boat. Jet boat, speed boat....Can be customization. Fiberglass and aluminum materials with 3 to 5 years guarantee;
600D Aluminum and FRP luxury yacht fishing boat jet boat speed boat open type with teak floor and boat canopy Name Specification Boat Materials - Aluminum 5083 Boat size - 6m x 2.1m x 0.8m Max people - 4 to 6 people Engine - outboard 90hp Waterline - 0.35m boat weight - 450kg Speed - 60km/h We are Original manufactuer for more then 10 years experience of all kinds of alumnimu boat, FRP boat ,water sport surf paddle board, sport PVC boats ...we can customized the size, color, design and logo for you. Please contact us.
passenger boat fierglass boat FRP boat speed boat sport boat.. 6.3m Fiberglass boat, Fishing boat, FRP boat, speed boat, passenger boat SPECIFICATIONS Length of Hull: 6.36m Beam: 1.8m Depth: 0.9m Boat Materials: Fiberglass Transom shaft length: L/L Boat Weight : 580kg Rec. HP: 90hp Max. HP: 115hp Main Motor Weight: 203kg Number of People: 10 Speed : 45 - 65km/h We are Original manufactuer for more then 10 years experience of all kinds of aluminum boat, FRP boat, RIB boat, water sport surf paddle board, sport PVC boats ...we can customized the size, color, design and logo for you. Please contact us.
FRP920 OPEN Fishing Boat With Consone Centre Console Boats Fishing Boats Specification Length: 920cm/ 30ft Beam: 230cm / 7.6ft Net Weight: 1400kg Passenger: 12 People Recommend power:150-300 hp Speed: 30 to 43knot Fuel Tank: 240L No of Engine: Single or Twins Standard Feature and Accessories 1) Fiberglass materials, White color boat hull and deck 2) Half open small cabin console and seat 3) Stainless Anchor column and 4pcs Anchor for rope. 4) Stainless Handrails 5) Steering system 6) Navigation lights, horns 7) 240L inside fuel tank (with oil level gauge) 8) bilge pumps 9) Rubber fender 10) Fiberglass fore and stern storage