X-Man Sound Activated LED Tshirt Light Up and down Flashing Equalizer music activated ELT-Shirt Man for Rock Disco Party DJ. Item specifics Item Type: Tops Tops Type: Tees Gender: Men Sleeve Style: Standard Style: Novelty Fabric Type: Knitted Hooded: No Material: Cotton Collar: O-Neck Sleeve Length: Short Pattern Type: Other Fit: Fits small, take a size larger than normal Product Description X-Man Sound Activated LED Tshirt Light Up and down Flashing Equalizer music activated ELT-Shirt Man for Rock Disco Party DJ Warming Suggestion:Choose one size bigger than usual. This LED EL T-Shirt is made of 100% cotton. It has an electroluminescent panel (EL) across the front that reacts to music and and 'pump' in time with whatever you are listening to. It also gives a visual rhythm guide to others. It is powered by a battery pack that put within inside of the cloth. This is a Sound activated T-Shirt, good for Party/Bar/festival/Birthday/Christmas...etc,please kindly noted its not for daily using. Packing included: 1x EL T-shirt H036. Main Features: 1. This T-shirt lights up and reacts to sound 2. Volume Control for the sensitive of music 3. Hand Washable, just unplug the battery box 4. Has a sound sensitivity control to take you all the way from loud anthem beats to the chill out room 5. Made from 100% cotton, this high tech. 6. Powered by a battery pack cleverly hidden within an inside shirt pocket 7. Good for music or dance fans and sports fans, especial for Hip Hop fans Washing Note: 1.Dry clean or hand wash only 2.Remove EL panel,battery pack and the whole power cord carefully before washing 3.Do not submerge any part of the flash panel Using Note: 1. Turn off the voice-activated drive switch (set to OFF); 2. Confirmed turn off, unplug the connection line from the voice-activated drive 3. Unplug the connection line from the EL wire. 4. Finally, remove the EL wire off clothing 5. Remove the battery when T-shirt does not use music system. In case low quality battery damages the voice-activated drive. 6. please do not place the music T-shirt EL wire and drive in wet places, and to prevent direct contact with water to prevent short circuit and short life span; 7. Please do not bend or fold the music T-shirt EL wire in order to avoid the chip impairment
Feature of the product: use of double casing , it has the character of high efficiency , wear-resistant, Stable performance and ecxellent changeable parts , the material of liner and impeller is adopt of wear-resistant metal or rubber , the discharge port can be positioned ar 8 differernt positions at an intervals of 45°. The pumps may be installed in multistage series , may be driven by belt or direct Connection, the seal of shaft may be adoptable of gland seal , expeller seal or mechanical seal, the direction of rotation from the drive end is clickwise Application: the pumps are suitable for deliverling abrasive , high density slurries in the metallurgical , mining, coal and power industrial departments , for example raw ore , middings , concentrates , gangues etc.
We can offer an LCD TV driver board and digital TV DVB-T, ATSC and ISDB-T series cards, Inverter, constant current board and built-in power supply. Our products can drive almost all 3.5-70 inch LCD screen, are matched with all kinds of LCD TV, LCD monitors, car TV and projectors. Size Model Resolution 110×60mm HD-88EDI-LF 1920×1200 110×60mm JRYN4B35 1920×1080 108×55mm JRY-ML58B-V6.3 1920×1080
Application: Electronic, Hardware, Car, Stamping Mould Processing Method: Grind, Wire Cut Process Combination: Progressive Die Driving Motor Type: Permanent Magnet Milling Speed: High Speed Size: 8mm*10mm*20mm Hole Tolerance: +/-0.003 Origin: Origin in Dongguan China Material: Tungsten Carbide Technics: Cutting Die Manufacturing Technology: Automation Technology Mold Cavity Technology: The Traditional Forming Electrode Machining Parts Detection Method: Geometric Detection Life Time: 3 Years Specification: Non-Standard, Standard, 8mm*10mm*20mm
Application: Electronic, Hardware, Car, Stamping Mould Processing Method: Grind, Wire Cut Process Combination: Progressive Die Driving Motor Type: Permanent Magnet Milling Speed: High Speed Size: 8mm*10mm*20mm Hole Tolerance: +/-0.003 Origin: Origin in Dongguan China Material: Tungsten Carbide Technics: Cutting Die Manufacturing Technology: Automation Technology Mold Cavity Technology: The Traditional Forming Electrode Machining Parts Detection Method: Geometric Detection Life Time: 3 Years Specification: Non-Standard, Standard, 8mm*10mm*20mm
Our company was established in 1998 as a professional manufacturer of precise planetary gearbox,actuator and motorized pulleys etc.And our head office is in shanghai city,the factory is in dandong city ,liaoning province. The factory total covers about an area of 1000 square meters,and we can supply about ten thousand pcs gearbox every month,and about two hundred thousand pcs every year. And now we have 4 products series, our core business: gearbox; second: gearmotor, and then the actuator ,and others relevant drive & control products.
Our company was established in 1998 as a professional manufacturer of precise planetary gearbox,actuator and motorized pulleys etc.And our head office is in shanghai city,the factory is in dandong city ,liaoning province. The factory total covers about an area of 1000 square meters,and we can supply about ten thousand pcs gearbox every month,and about two hundred thousand pcs every year. And now we have 4 products series, our core business: gearbox; second: gearmotor, and then the actuator ,and others relevant drive & control products.
Our company was established in 1998 as a professional manufacturer of precise planetary gearbox,actuator and motorized pulleys etc.And our head office is in shanghai city,the factory is in dandong city ,liaoning province. The factory total covers about an area of 1000 square meters,and we can supply about ten thousand pcs gearbox every month,and about two hundred thousand pcs every year. And now we have 4 products series, our core business: gearbox; second: gearmotor, and then the actuator ,and others relevant drive & control products.
Features: Pipe-threading shaft and knife shaft adopt main drive with high rotation efficiency,.knife shaft with a security guard makes operation more safe and secure , cutting method use pneumatic automatic knife feeding, depth of precise adjustment, one key operation, automatic unwinding operation stable and convenient. Technical parameters: 1.Material type: paper tube 2.Paper tube thickness: 5 mm 3.Paper tube inner diameter: 32, 38, 76 mm 4.Maximum effective width: 550 mm 5.Power supply: 380V, 50 Hz 6.Total power: 2.2 KW
Er-sy280 skid steer loader Engine rated power:15kw (21hp) Engine rated speed:3600rpm Noise level: less than 95db Hydraulica system pressure: 17mpa Lifting time: 3.31 second Turning time:0.72 second Falling time: 1.95 second Load capacity: 165kgs Scraper capacity: 0.12cubic meter Max lifting force: 375kgs Driving speed: 0~5.5km/h Operation weight: 700kgs~855kgs based on different tires Tire optional: 16*6-8 ; 5.00-8 ; kt302 18*9.5-8 6p/tl ; 18*6.5-8 Nude packing
Microsoft Dynamics GP helps businesses gain greater control over their financials, better manage their inventory and operations, and make informed decisions that help drive business success. Financial management and accounting-Manage your cash, assets, and banking. Inventory management and operations-Track and manage your production, inventory, orders, and vendors. Sales and service-Manage your sales, service contracts, and field resources. Business intelligence and reporting-Get real-time visibility and analytics to track performance and act with insight. Human resources and payroll-Hire, train, and Pay your team.
4, CNC lathe spindle adopts Taiwan high precision spindle, containing Japan NSK precision bearing, spindle flange can be directly mounted with a diameter of 160 three jaw self core hydraulic chuck or other elastic collet. 5, CNC lathe drive part of the well-known brands of Taiwan P3 high precision HIWIN/PMI grade ball screw. 6, the numerical control lathe lubrication method uses the automatic intermittent type lubrication system, the intermittent time can be controlled by the system. 7, CNC lathe processing is simple, long and thin bar can be equipped with a knife.
New Holland Excel 4710Tractors are all about power versatility and comfort The new TD5 range features a new classleading range topping 90HP model The wide range of 20 12 speeds makes every job easier and enhances the productivity Luxury turns a corner with this spacious all new VisionView cab Featuring 360degree visibility greatly reduced noise levels and ergonomically designed controls ENGINE Make Simpsons TIIIA SJ327 Engine Horse Power HP 47 No Of Cylinders 3 Displacement cc 2700 Rated rpm 2250 Aircleaner Oil Bath with PreCleaner Transmission Clutch Type DoubleSingle PTO Clutch Yes Transmission type Fully Constantmesh AFD No of Gears 8F2R 88 Synchro Shuttle Road Speed Rated RPM 303324 82 2933252 88 Reverse Speed Kmph 3681088 82 3103436 88 Brakes Mechanical Real Oil Immersed Brakes Tyres Front Tyres 2WD 60 x 16 65 x 16 amp 4WD 80 x 18 83 x 24 amp 95 x 24 Rear Tyres 136 x 28149 x 28 PTO PTO HPrated RPM 43 PTO Speed Eptraa PTO 7 speeds PTO Standard Yes Economy Yes Reverse 0 Ground Speed Yes Hydraulics Lift Capacity kg 1800 Kg at 3 point Linkage Sensing HP Hydraulic with LiftOMatic Multi Sensing Point LiftOMatic Yes Tipping Trailer Pipe Yes Remote Valve Yes Battery 75 Ah Alternator 35 Amp Steering Steering Power SteeringMechanical Final Drive Final Drive Straight Axle Planetary Drive Fuel System Fuel tank Capacity litresTD590 62 Ltr Ultra Comfort amp Safety Features Super Deluxe Seat Yes Fan Belt Guard Yes Neutral Safety Switch Yes Clutch Safety Lock Yes Frame amp Canopy Yes Mobile Chargng Port Yes
manufacture Andritz ACP paper stock pumps and pump spares: ACP 65-315, ACP 100-500, ACP 65-250, ACP 100-315, ACP 125-400, ACP 150-500, ACP 100-250, ACP 125-315, ACP 150-400, ACP 200-500, ACP 300-700, ACP 125-250, ACP 150-315, ACP 200-400, ACP 400-700, ACP 250-315, ACP 300-400, ACP 450-550, ACP 600-700 etc. ANDRITZ ACP and S series Pump Specifications: Design:single-stage, single-flow, open and semi-open impeller Consistency:up to 8% Head:10-180 m Flow rate:up to 8,000 m3/h Pressure:up to 40 bar Temperature:up to 200 Efficiency:up to 90% ACP Centrifugal Pump Design: Impeller(230) Accelerating the medium by charging it with energy. Semi-open impeller with vanes on the back. Spiral casing (102) Guiding the medium with a favorable flow pattern, converting speed energy into pressure energy. Pressure-sealed pump casing with delivery and suction channels. Suction and delivery flange. Holds the bearing housing with bearing assembly, shaft and impeller. Pump shaft (211) Holding the impeller, shaft seal, bearing assembly and coupling. Transmitting the drive energy to the impeller and thus, to the medium. Sturdily dimensioned drive shaft. Bearings Interface between stationary and rotating parts. Absorption of axial and radial forces. Impeller side: Two angular contact ball bearings (321.1) with steel cage. Drive side: One deep groove ball bearings (321.2) with steel cage. Shaft seal Depending on operating requirements, there is a choice of eight different shaft seals: Cartridge mechanical seal - single Cartridge mechanical seal - double Standard cartridge mechanical seal - single Standard cartridge mechanical seal double Single standard mechanical seal Tandem mechanical seal Stuffing box packing Dynamic shaft seal
Product Features: 1. Remot control with rolling code technology 2. Powerful AC motor with low noise and overheat protection. 3. Emergency release provides manual operation in case of power failure. 4 .Safety further ensured with optional accessories photocells and flashing ligh. 5. Color: Blue, Gray. Working Principle and Main Components & Functions The gate opener mainly consists of a high-strength aluminum alloy box,a high-quality single-phase motor,a frictional overrun clutch, a worm-gear reducer, a gear clutch and an output gear.During the operation,the motor spindle drives both the reducer and output gear by means of the frictional overrun clutch, and the output gear then push racks mounted on the sliding gate to move the door horizontally, so that the gate can be opened and closed in the energized state. When the special key is turned clockwise,the gear clutch is engaged and the motor power transmitted by the worm gear drives the output gear to rotate via the gear clutch so as to drive the rack mounted on the door, pushing the door to move (or to open and close) horizontally. Meanwhile because of the reverse self-locking feature of the worm gear mechanism, the door is locked as well, keeping closed against an external force. When the is turned counterclockwise, the left and right parts of the gear clutch are disengaged from each other and the output gear is freed from the influence of the motor, allowing the door to be opened and closed manually.
Specifications Dimensions Assembled Depth (in.) 62 in Assembled Height (in.) 42 in Assembled Width (in.) 30 in Cutting Width (in.) 30 inches Front Wheel Size (in.) 13 Mower Deck Width (in.) 30 in Rear Wheel Size (in.) 18 Turning Radius (in.) 18 Details Assembly Required Yes CA (CARB) Compliant Not CARB Compliant Commercial / Residential Residential Cutting Options Mulch,Side-Discharge Deck Material 13 Gauge Steel Deck Type Stamped Drive Type Rear-wheel Drive Engine Displacement (cc) 344 Engine Make Briggs and Stratton Engine Engine Torque (ft.-lb.) 0 Fuel Tank Capacity (gallons) 1.3 gal Horsepower (HP) 10.5 hp Included with Riding Mowers Battery(s),Engine Oil Lawn Mower Type Rear Engine Riding Mower Maximum Cutting Height (in.) 4 Maximum Forward Speed (mph) 4.25 Maximum Reverse Speed (mph) 4.25 Minimum Cutting Height (in.) 1.25 Mower Size Small Number of Blades 1 Number of Blades 1 blade Number of Cylinders Single Cylinder Number of Deck Wheels 0 Oil Capacity (oz.) 48 Power Type Gas Product Weight (lb.) 340 lb Rear Wheel Size (in.) 18 in. Recommended Oil Type 10W-30 Refurbished No Returnable 30-Day Riding Mower Features Adjustable Cutting Height,Adjustable Speed,Assembly Required,Built-in Hitch,Cup Holder,Keyed start,Mulching Lawn Mower,Pneumatic Tires,Residential,Reverse Mowing,Rust resistant deck,Single-lever height adjustment Size of Yard 1 - 2 Acres Size of Yard 1/2 - 2 Acres Start Type Electric Terrain Type Flat with Obstacles,Hilly Transmission Type Gear Drive Warranty / Certifications Certifications and Listings No Certifications or Listings
VEICHI provides OEM/ODM Service for TOP Customers. The AC330 series inverters are further optimized on the VEICHI AC310 product platform. Integrate the drive control concept of synchronous reluctance motor and develop a new vector control algorithm. Made a brand-new flux linkage observer. Product Advantagesï¼? 1. Brand-new high-performance vector algorithm platform, dedicated drive for synchronous reluctance motor. 2. Ultra-efficient energy-saving drive. 3. Accurate torque excitation decoupling, excellent dynamic response performance. 4. Comprehensive thermal simulation design to ensure the rationality of hardware arrangement. 5. Full series of book design, saving installation space to the greatest extent. 6. Comprehensive expansion interface, a rich selection of accessories, covering various applications. 7. Simpler and more convenient on-site debugging method, support on-site firmware upgrade. 8. The three-proof design of the whole machine and the three-proof paint of PCBA spraying ensure that the product is stable and reliable. Applications Plastic machinery, air compressors, machine tool spindles, textile machinery, pharmaceutical machinery, and other light industrial machinery needs. It can also be used for fans, pumps, petroleum, chemical, paper-making machinery, and other heavy machinery and equipment. Power range:S2: Single-phase 200V~240V 50Hz/60Hz T2: Three-phase 200V~240V 50Hz/60Hz. T3: Three-phase 380V~480V 50Hz/60Hz T6: Three-phase 660V~690V 50Hz/60Hz. Output frequency: 0Hz 600Hz
The AR Racing newest car driving simulator, Innovative product for the international market for childrens entertainment and simulation racing events. A New Way to Racing, Support Multiplayer Racing, With the Miniature Real Theme Track, Much Fun & Interesting. Up to 200MPH Driving Experience.Use 1080P Full HD / 5.8G Transmission, No Delayless Photonic Set from Israel AMIMON CONNEX PROSIGHT Series, Entity 1:16 Miniature Racing, you can experience a real racing speed of more than 200 miles in complete safety, bring a more real feeling! This is probably the best racing simulator available on the market today. There are 2 types of driving simulators for AR Racing, namely standard version [without E-motion] or professional version [with E-motion]. FAQ of Owatch AR Car Racing Game Can change with my logo? Original equipment manufacturing (OEM) can be customized to replace the logo. How is the battery of the remote control car? Rechargeable Li-ion battery with 12V/5600mAh and work for 2-3 hours continuesly! Quick replace in 1 minute. What spare parts come with shipment? 4 Batteries+4 Chargers / each Car, Easy-Broken parts:Screws, Cables, Electric boardsâ?¦ Is it difficult to install? 2 Peoplesï¼?2 Hoursï¼?Service Team Support in the back. How to pack for shipping? Bubble film+Stretch film+wood case. What certificate do you have? Design Patent & CE certificates. How long the delivery? 15 days after order confirmation regularly. How to fix it when problem happen? Online Troubleshoot with Service Team. If Hardware issue, send replacement by DHL, If Softare issue, remote to fix. Howâ??s the warranty? 1 year super warranty for both pare parts & software. Pros: Good price for the production, sturdy, high-quality construction, adjustable seating and wheel position, support multiplayer racing, with the miniature real theme track
Features 159cc Cub Cadet 4-Cycle OHV Engine Autochoke SureStart guarantee Mower will start in 1 or 2 pulls for full 3-year warranty period Variable Speed Self-Propelled Drive System Rear wheels propel the mower Set your speed based on terrain and personal preference Cub Cadet Signature System 21-inch, 3-in-1 steel mower deck Provides superior mulching, rear bagging and side discharge Patented SmartJet high-pressure deck washing system 1.9 bushel capacity dust-blocking rear bagger Industrial Tread Wheels 7-inch front ball bearing full swivel caster style wheels 8-inch rear wheel size Helps the mower easily move across uneven terrain Soft-Touch Foam Grip Handle 3-way adjustable ergonomic bail Specifications Engine Engine BrandCub CadetStarting SystemRecoil StartEngine Cycle4-CycleCC159 CCsEngine Cylinders1 CylinderOil FilterNoConsumer Engine Warranty3 Years Deck Cutting Options3-in-1 (Side-Discharge/Bag/Mulch)Deck MaterialSteelDeck ConstructionStampedDeck Positions6 PositionsSpindle MaterialSteelBlades1 BladeCutting Width21 InchesCutting Height1.25-3.75 Inches Drive Speeds6 SpeedsDrive WheelsRear WheelsDrive SystemBelt-Drive Accessories Rear BaggerIncludedMulcher KitIncluded Wheels Front Tire Size7 InchFront AxleSwivelRear Tire Size8 InchTire TypePlastic Wheels Overview Weight82 PoundsConsumer Warranty3 YearsUPC043033582327Additional Model Numbers12ABC62J710, SC 500 Z
1. About the Manual The Lake Drilling MOTOR is a powerful and reliable positive displacement motor. The motor generates an optimum balance of rotational speed and high torque to drive a variety of drill bits at speeds that maximize tool life and performance. LAKE MOTORS offers a choice of flow rates, speeds, and torques to match a wide range of operational parameters. LAKE MOTORS are used in applications such as straight hole drilling, directional (steerable) drilling, horizontal drilling, hole opening, and re-entry(work over). 2.Description of downhole motor 1.The down-hole drill motor is a kind of downhole drill tool driven by mud. 2.As mud fluid from the mud pump enters the motor via the bypass valve, a certain pressure difference is formed at the inlet and outlet of the motor, pushing the rotor to rotate. Torque and rotate speed are transferred via the cardan shaft and the driving shaft to the bit. 3. Performance of the down-hole drill motor depends mainly on performance parameters of the screw motor. 4.This product uses the high and new technology of coating to avoid coating off of rotors resulted from the traditional technology. Its strength and life are greatly improved. 5.It is applicable to directional drilling,horizontal drilling, composite drilling, cluster wells, sidetrack wells and well workover etc. 3. Advantage of downhole motor Increased rate of penetration. Better hole deviation control. Reduction in drill string failure rate. Reduction in wear and tear of the swivel, Kelly, and rotary drives. Reduction in fuel cost, since compared to rotary drilling, less energy is required to power a downhole motor.
