Name: traffic signs Type: Linear induction label, back of the traffic sign, holding hoop, minimum speed limit, straight line,left turn, pedestrian crossing, road on the right side, circle island Drive, pay attention to pedestrians, pay attention to non-motor vehicles, pay attention to children, accident prone section, construction, slow line, continuous detour, sharp turn, village, limitAxle weight, limit quality, limit speed, limit width, limit height, stop check, ban on direct line, no load of cargo riding to enter, forbid.Transportation of dangerous goods vehicles, prohibition of turning left, no passing, no parking, etc.
(1) Double-sided labeling machine of blood typing card adopts Siemens PLC control and Schneider servo motor drive. Featuring fast speed, high accuracy, high stability, durability, application flexibility and other advantages, it drastically improves the production efficiency and saves the cost; (2) With adoption of photoelectric detection and stepless speed regulation, it has advantages such as accurate labeling and high accuracy. Every box is labeled, and it can monitor and correct automatically if there will be no label; (3) It can be used independently, with products to be placed on feeding end or discharging end, or it can be used online.
Name: traffic signs Type: Linear induction label, back of the traffic sign, holding hoop, minimum speed limit, straight line,left turn, pedestrian crossing, road on the right side, circle island Drive, pay attention to pedestrians, pay attention to non-motor vehicles, pay attention to children, accident prone section, construction, slow line, continuous detour, sharp turn, village, limitAxle weight, limit quality, limit speed, limit width, limit height, stop check, ban on direct line, no load of cargo riding to enter, forbid.Transportation of dangerous goods vehicles, prohibition of turning left, no passing, no parking, etc.
(1) double-sided labeling machine of blood typing card adopts siemens plc control and schneider servo motor drive. Featuring fast speed, high accuracy, high stability, durability, application flexibility and other advantages, it drastically improves the production efficiency and saves the cost; (2) with adoption of photoelectric detection and stepless speed regulation, it has advantages such as accurate labeling and high accuracy. Every box is labeled, and it can monitor and correct automatically if there will be no label; (3) it can be used independently, with products to be placed on feeding end or discharging end, or it can be used online.
Dimension: 480x600x560mm Table size: 470x320mm Acceptable material thickness: 140mm Effective working area: 200(X)*280(Y)*90(Z)mm Spindle motor: 800W/1.5KW water cooling spindle(optional) Max traveling speed: 4000mm/min Processing speed: 3000mm/min Positioning accuracy: 0.03-0.05mm Drive mode: stepper motor Spindle speed: 0-24000rpm/min Transmission: TBI imported ball screw Interface: usb Mach3/NcStudio Voltage: AC220V/AC110V Warranty: one year
Model SKA-720 Max.Material Width 720mm Max.Cutting Width 620mm Speed Max speed: 800mm/s Knife Pressure 10-600g Memory Standard:512k ** 2M for option Mechanical Resolution 0.0254mm/step Repeating Precision 0.127mm Interface USB,COM Port Language Format DM/PL,HPGL Power AC160V-240V,50-60HZ Driving System Stepper Working Environment Temperature 0-35â?? Working Environment Humidity 5%-95% , No coagulate water Display LED in Chinese or English Net/Gross Weight 20/28kg Packing Dimension 1130x410x360mm
Technical Parameters: Model SKA-850 Max.Material Width 850mm Max.Cutting Width 750mm Speed Max speed: 800mm/s Knife Pressure 10-600g Memory Standard:512k ** 2M for option Mechanical Resolution 0.0254mm/step Repeating Precision 0.127mm Interface USB,COM Port Language Format DM/PL,HPGL Power AC160V-240V,50-60HZ Driving System Stepper Working Environment Temperature 0-35â?? Working Environment Humidity 5%-95% , No coagulate water Display LED in Chinese or English Net/Gross Weight 25/35kg Packing Dimension 1270x410x360mm
Technical Parameters: Model SKA-1100 Max.Material Width 1100mm Max.Cutting Width 1000mm Speed Max speed: 800mm/s Knife Pressure 10-600g Memory Standard:512k ** 2M for option Mechanical Resolution 0.0254mm/step Repeating Precision 0.127mm Interface USB,COM Port Language Format DM/PL,HPGL Power AC160V-240V,50-60HZ Driving System Stepper Working Environment Temperature 0-35â?? Working Environment Humidity 5%-95% , No coagulate water Display LED in Chinese or English Net/Gross Weight 35/45kg Packing Dimension 1520x410x360mm
1.Night light, TF card music player. 2.Compatiable with bluetooth phones, MP3/MP4/CD/PC/MAC/PSP,etc. 3.Bluetooth synchronous broadcasting function 4.Built in Microphone.Hands free For calling when you driving 5.Touch the lamp, change different colors 6. Alarm clock and time display 7.HD sound quality, energy-saving warm light does not hurt the eyes 8.Natural, practical and convenient If you want to know more,please visit our company's website
4x3C-TH Slurry Pump is engineered with the latest hydraulic and wear technologies to cope with the most severe corrosive and abrasive slurry applications, The 4x3C-AH pumps feature patented innovative designs that can significantly reduce the operational costs of slurry pumping, It is widely used in industry of mining, electrical power, metallurgy, coal, environmental protection, etc for transportation of abrasive solid slurry. Design Features: â?? The 4x3 C TH slurry pump frame plates have replaceable wear-resistant metal liners, impellers & volute liners are made of wear-resistant metal(such as A05, A49,and other high chrome metal). â?? The 4x3 C TH slurry pump bearing assembly use cylindrical structure, adjusting the space between impeller& front liner easily, being removed completely when being repaired. Grease lubrication. â?? The 4x3 C TH slurry pump shaft seal could use the packing seal, expeller seal and mechanical seal. One pump also can be use packing seal with expeller seal together. â?? The discharge outlet can be positioned at intervals of 45 degrees by request and oriented to any 8 positions to suit installations and applications. â?? The 4x3 C TH slurry pump can be installed in multistage series to meet the delivery for long distance. â?? The 4x3 C TH slurry pump drive types, such as direct coupling drive (DC), V belt drive (CR, CV, ZV) etc.
An 8-ton diesel forklift is a type of material handling equipment that is powered by a diesel engine and is used for lifting and transporting heavy loads. It is commonly used in warehouses, construction sites, ports, and manufacturing facilities. Features: 8-ton diesel forklift with japan engine 4 front pneumatic tires and 2 rear pneumatic tires 2 stage 3 m mast open cab LED working light Japan engine or china engine 8-ton lifting capacity Diesel engine for reliable power Heavy-duty construction for durability Four-wheel drive or three-wheel drive for increased stability Automatic or manual transmission for ease of use Adjustable fork height for versatile operation Mast tilt function for improved visibility Safety features such as seatbelts, overhead guards, and safety sensors Hydraulic power steering for improved maneuverability Pneumatic Tires for improved traction on rough terrain Can have additional attachments such as side shifts, rotators, etc. Applications: Loading and unloading of heavy cargo Moving materials within a warehouse or construction site Loading and unloading of shipping containers Heavy-duty material handling in manufacturing and industrial environments Loading and unloading of heavy equipment Loading and unloading of heavy containers in ports The 8-ton diesel forklift is a heavy-duty piece of equipment that is designed to handle heavy loads with ease. Its diesel engine provides reliable power, while its heavy-duty construction ensures durability. The four-wheel drive and pneumatic tires provide increased stability and improved traction on rough terrain. The adjustable fork height and mast tilt function allow for versatile operation and improved visibility. Safety features such as seatbelt and overhead guard ensure the operator's safety during operation. This forklift can also have additional attachments such as sideshifts, rotators, etc. making it more versatile. The 8-ton diesel forklift is a versatile and reliable option for a wide range of heavy-duty material handling applications, especially in ports, loading and unloading of heavy equipment and containers.
A 35 ton diesel forklift is a type of heavy-duty industrial forklift that is capable of lifting loads weighing up to 35 tons. These forklifts are typically used in manufacturing, construction, and other industries that require the movement of large, heavy loads. Features 1) The engine adopts a turbocharged engine with low fuel consumption, which has good power performance and a large torque reserve. 2) The braking system adopts the mature products of the manufacturer. The brake is a disc brake, with fast heat dissipation, lightweight, simple structure and convenient adjustment. It has good high-temperature resistance performance under high load and a stable braking effect. 3) The gearbox adopts a domestic brand gearbox, which has good driving performance and traction performance. It is easy to maintain, economical and applicable, and the accessories have good versatility. 4) The operating system adopts the pilot valve to control the working system. Simple, convenient and comfortable operation. While reducing the labor intensity of the driver, the work efficiency is improved. 5) Hydraulic system, double pump confluence, small system flow, low power consumption, stable performance. 6) The electrical system is equipped with maintenance-free batteries. Flame retardant wire and sheath, electrical components. 7) The cab is luxurious with shock absorption, equipped with a sunroof, heating and cooling air conditioner, wide field of vision and comfortable seat. With explosion-proof film, explosion-proof, heat insulation, anti-glare, and sound insulation. 8) The fork adopts high-strength, mature products of the manufacturer, which can double the service life. 9) Tire rim, no spoke steel rim, bears a heavy load. Sino-US joint venture puncture-resistant high-strength tires. 10)Reinforced drive axle, high-strength heavy-duty planetary wheel-side reduction drive axle. The axle housing has higher strength and greater bearing capacity. With stability and stability.
The screen ladder grille is mainly composed of the main components such as the driving device, the frame, the traction chain, the screen plate with the lifting ladder, the washing system and the electric control system. The drive motor is installed on the main shaft in the positive direction of the frame. Driven by the transmission chain, the mesh plates on both sides will extract the dirt trapped within its length from bottom to top. When it reaches the upper part, it will pass the steering function of the sprocket. Under the action of the flushing water of the top flushing device, the unloading work is automatically completed. The drive device of the mesh plate ladder grille is located on the upper part of the frame, which is an imported brand SEW shaft-mounted reducer. Screw-type adjustment devices are installed on the front and rear sides of the frame to adjust the tightness of the transmission chain. The frame of the mesh plate ladder grille is an integral cuboid rigid structure assembled and welded by stainless steel plate and section steel. A water inlet hole is opened at the water-facing end of the lower part of the frame, guide rails are arranged on the front and rear walls of the frame, and an internal slag collecting groove is also arranged on the upper part of the frame, which extends to the outside of the machine. The rack is installed in the grid well, and the gap between the two sides of the rack and the grid well is the channel for the filtered water from the grid. Diversion baffles are arranged on both sides of the water-facing end of the rack, which can prevent floating garbage from passing through while diverting.
Hydraulic shaftless mill roll stand Spindle 240mm, hyperbolic heavy rocker, expand chuck, multi-point brake, hydraulic drive lifting, panning left and right on the middle. Hydraulic mill roll stand Specification The symmetrical structure can install two rolls of paper at the same time and continually change paper, paper roller clamp, lift-lower, loosen, movement, contraposition, translation etc. Equipment was made of HT200-wide casting. Maximum loading of one side arm 1500-2000kg Each stand with two set track and trolley for carry paper. Pneumatic braking Electrical components are controlled centralized(domestic brank) One set main motor power of hydraulic mill roll stand is 2kw, each arm power 1.5*4kw YIKE GROUP Hydraulic mill roll stand Advantage Hydraulic mill roll stand characteristic Professional manufacturer Economic cost Durable working Fast delivery Good after service Structural features 1.Adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and othersï¼?the lifting of the paper adopts hydraulic drive. 2.Brake adjustable adopts multipoint braking system. 3.Each paper rack is equipped with two paper carts that can be served simultaneously from both sides. IIã??Technical parameter 1ã??Paper clip range maximum : 1800mm minimum : 1000mm 2 Folder diameter maximum : 1500mm minimum : 350mm 3 Main shaft diameter of paper holder 240mm 4 Gas source work pressure Mpa 0.4---0.8Mpa III Hydraulic system parameters 1 Work pressure Mpa :16---18Mpa 2 Lifting hydraulic cylinder 10 440mm 3 Clamping hydraulic cylinder 63 1300m 4 Hydraulic station motor power 3KW --380V -- 50Hz Solenoid valve voltage 220V 50 Hz
Spiral Sand Washer Spiral sand washer is widely used in the washing of materials in the sand and gravel plant, mining, construction materials, communication, chemical, hydropower, concrete mixing plant, etc. It can efficiently clean the sand, taking away the impurities adhered to the sand and breaking the vapor coatings around the sand particles to facilitate dehydration. It is applied to sand and gravel plant, construction sites, hydropower plant dams, glass making, and development of oil well, etc. Spiral Sand Washer Features: 1.Reliable drive system, high capacity and low energy consumption; 2.Simple and good seal structure, stable performance and convenient operation; 3.A wide range of applications, suitable for cleaning various sizes of materials 4.The finished product has a high degree of cleanliness, extremely low content of mud and stone powder; 5.The spiral blade is made of cast steel with high wear-resistance and long service life. Working Principle : When operating, the motor drives the impeller slowly rotating through the V-belt and reducer. The sand is put into the washing tank through the feeding chute, and rolls over by the impellter driving. During the rolling, the friction between the sand particles strips the impurities, and breaks the vapor coatings around the particles in order to facilitate dehydration. Meanwhile, massive water is put into the washing tank to form a strong water stream to take the impurities and small percentage of foreign matters away immediately and discharge them from the overflow port. The clean sand is taken by the impeller, and finally puts into the discharge groove, finishing the whole washing process.
Single Cylinder Hydraulic Crusher Single cylinder hydraulic cone crusher is widely used in mining, metallurgy,construction, highway, railroad, and waterconservancy, etc. It can break or crush all kinds of medium hard or harder ore for mining, chemical building, materials and other industrial sectors. This kind of machine has the features of big crushing ratio, continuous operating, even granularity, automated hydraulic clearing system, high capacity, simple structure and low operating cost, suited perfectly for middle and fine crushing. Crushing Features: 1.Higher rotating speed and stroke make production capacity which improved 35%-60% than old spring cone crusher; 2.The Max feed size is bigger than other kinds of cone crushers; 3.Better shape of final product than spring cone crusher. Less Needle flake; 4.The design of hydraulic protection and hydraulic cavity clearing improves the automation and reduces the downtime and maintenance time; 5.Auto system of thin oil lubrication makes the life time increased. Working Principle : When the crusher works, the motor drives the small gear; the small gear drives the large gear; the large gear assembly (large gear, large gear rack) drives the eccentric bushing assembly (eccentric steel bush and eccentric bronze bush) and main shaft assembly (main shaft, inner cone, inner cone liner) to revolute within the bronze bush with the center of theoretical verticlal line, while the main shaft assembly can rotate around the main shaft within the eccentric bronze bush as the center line. When the crusher works without load, the eccentric bushing assembly and the main shaft assembly revolutes the large gear. When the materials fall into the crushing cavity, the main shaft assembly (main shaft, inner cone) slowly rotates within the eccentric bronze under the resistance of materials.
organization structure Shaftless screw conveyor is mainly composed of driving device, head assembly, casing, shaftless screw body, groove lining plate, feed inlet, discharge outlet, machine cover (when required), base, etc. Driving device: cycloidal pin gear reducer or shaft mounted hard tooth gear reducer shall be adopted. In the design, the driving device shall be set at the end of the discharge port as far as possible to make the spiral body in the tension state during operation. The head is equipped with thrust bearing, which can bear the axial force generated when conveying materials. Casing: the casing is U-shaped or O-shaped, with a rain proof cover on the upper part, which is made of stainless steel, carbon steel or FRP. Shaftless spiral body: made of stainless steel or carbon steel. Tank lining plate: the material is wear-resistant plastic plate, rubber plate or cast stone plate. Inlet and outlet: there are two types: square and circular. Generally, the form of inlet and outlet is determined by the user. Scope of application Screw conveyor has the advantages of simple structure, low manufacturing cost, strong sealing, safe and convenient operation, and can be loaded and unloaded at multiple points in the middle It is widely used in chemical industry, building materials, metallurgy, grain and other departments < Under the condition of 20 , transport powdery, granular and small pieces of materials with low viscosity, not easy to deteriorate and caking
1. Product description Precision planetary gearboxes from SR are compact and light,comparing with shaft-fixed driving cylindrical gear reducers with hard tooth surface,the weight is 1/2-1/3 lower,and volume is 1/2-1/3 less.It is of high driving efficiency,bearing capacity and driving power.The outline shapes are varied,and they will run steadily and at low noise.It employs high-quality Alloy steel that is hardened and nitrided,so it is of better performance. 2. Technical parameter -Rotation of input-shaft:<1500r/min -Transmission Rate:single-stage 4ï½?18,double-stage 20ï½?125,three-stage 112ï½?1250  3. Features (1)Color:Chinese Red or as clients' requirement (2)Material:Nodular Cast Iron or as clients' requirement (3)Weight:180kg-2000kgã??53kg-1733kgã??85kg-57000kg (4)Deceleration reduces the inertia of the load at the same time, and the reduction of inertia is the square of the reduction ratio. (5)The backhaul clearance is small, the accuracy is high, the service life is very long, the rated output torque can be done very much. 4. Terms of Payment 30% by T/T in advance.  5. Packaging & Delivery Packing details:We usually use the fumigation wooden case packing,also can be customized according to customer service request.  Loading Port: Shanghai or Ningbo Shipping details:Ocean shipping and air freight. Delivery time: Within 25-35 working days after we have received the full payment. 6. Our service (1)The Warranty period is 12 months. (2)Have many years of production experience. (3)We have the independent right to export, price better, can control the quality and delivery time. (4)The photos and films of production process will be reported to you. (5)Good after-sales service.
Chemical dry powder V-shape mixing machine price Product Description Features: 1.Major sections : barrel,screw ,spray system, feeding parts, discharging part and driven unit. 2. Sizes : available from 50Liter to 10000 Liters. 3. Material: Carbon Steel, Stainless Steel 304, Stainless Steel 316L 4,Discharge : Spherical valve or plum-blossom dislocation valve The drive of valve can be divided into manual, pneumatic, and electric. 5,Speed: Controls such as variable frequency drives, motor starters and operator stations are available. 6. Temperature :mixer can be equipped with heating or cooling jacket if temperature control is required, Spray nozzles for liquid introduction, 7. Application : Powder and liquid mixing, like Food, Pharmaceutics; Agriculture; powder metallurgy, pesticide, food, electronics, ceramics Working principle: Double ribbon mixer drive the material from two ends to centre through the help of the outer ribbon, while the inner ribbon push the material from centre to two ends, thus, material achieve a high mixing effect at short time. Dry powder double helix conical screw mixer machine is efficient mixing equipment set combined single spiral cantilever of Japan and advantages of theSLH double helix cone mixer in domestic?? The machine can be widely used in industry,of chemicals, pharmaceuticals, pesticides, fertilizers, dyes, metallurgy, mining, food, MSG, feed for solid - solid (powder and powder) mixed solid - liquid (ie, powder body add liquid ) mixed. Adaptability to the mixture: heat-sensitive materials will not overheat; hierarchical segregation phenomenon of the particulate material will not be crushing and grinding; the mixing does not occur between the proportion of different grain size materials; on the coarse-grained,a mixture of powder and a variety of fine and ultrafine particles, fibers or sheet material and has a good adaptability.
Rotary Kiln is one of the most important equipment among all the mining machineries. It is composed of cylinder, gears, supporting device, sealing for kiln tail, sealing for kiln head and other parts. Rotary Kiln is one of the most important equipment among all the mining machineries. It is composed of cylinder, gears, supporting device, sealing for kiln tail, sealing for kiln head and other parts. Kiln cylinder is a heated revolving part which is welding by high quality carbon steel plate. Cylinder is supported on the supporting device by tyres. And there is machanical or hydraulic pressure catch-wheel on one or several gears in order to control the turning of cylinder. By the gear rings in the middle of cylinder, gears drive the Cylinder to rotating with the speed under technical design requirement. Because of the need of installation or maintenance, the big size rotary kiln has auxiliary gears, which make cylinder rotates at low speed. In order to prevent cold air comes into cylinder and the leaking of gas and dust, the reliable kiln tail and head sealing equipment are installed on the feeding and discharging end. Application: Rotary Kiln is thermal equipment which takes heating treatment to lump, bulk and slurry materials. It can be widely used in different industries such as cement & construction, non-ferrous metals, ferrous metals, refractory materials, industrial chemicals, paper making and etc. Features & Advantages: Supporting Device adopts advanced main shaft structure, automatic temperature measuring device and electrical heating device. Catch-wheel mechanical wheel or hydraulic thrust wheel. Hydraulic thrust wheel is equipped with advanced hydraulic controlling system. Gears single driving or twin driving. Rotating speed is under control of adjustable-speed motor, DC motor, or frequency adjustable-speed motor. Reliable operation, energy-saving and high efficiency. Liners for tyres of cylinder fixed type, adjustable type, or floating type Simple structure, convenient replacement and maintenance without any damage to cylinder Sealing Device variety types are available in accordance to different design of rotary kiln; Such as air cylinder edge sealing, spring edge sealing, graphite block sealing and etc.