Titanium rod filter element is a porous filter element made of industrial high-purity titanium, which is formed by sieving, cooling and isostatic pressing, and then sintered at high temperature and high vacuum. It has outstanding qualities such as corrosion resistance, high temperature resistance, high strength, ease of filtration accuracy assurance, and ease of regeneration. It is suitable for the filtration of various corrosive media, such as: hydrochloric acid, sulfuric acid, hydroxide, sea water, aqua regia, and chloride solutions such as iron, copper, and sodium. Technical Parameters Filtration accuracy: 0.22um-100um Porosity: 30-40% Air permeability: 0.02-20M3cm/m2h Compressive strength: 0.5-1.5Mpa Temperature resistance: 280C (wet state) Maximum working pressure difference: 0.6Mpa Diameter: 30mm 50mm 60mm Length: 5 inches 10 inches 20 inches 30 inches 40 inches Interface form: M20 M30 222 226 DFPD (double flat port) Filtration accuracy: 0.45m, 1m, 3m, 5m, 10m, 20m, 30m, 50m, 80m, 100m Features 1. High temperature resistance Generally, it can be used normally under 280 degrees. 2. Uniform and stable precision Uniform structure, narrow pore size distribution, high separation efficiency, high porosity, low filtration resistance, high penetration efficiency. 3. Resistance to corrosion Chemical stability, acid and alkali corrosion resistance, and oxidation resistance are all strengths. 4.A large filter area In accordance with food hygiene and pharmaceutical GHP criteria, there is no particle shedding and no secondary polluting of the original solution. 5. Longevity It is easy to clean, can be regenerated online, and has a long service life (generally several times that of membrane filter elements). Applications 1. It is employed in the pharmaceutical business for decarbonization filtration in the concentrated preparation of big infusions, tiny injections, eye drops, and oral liquids, as well as security filtration prior to terminal filtration in diluted preparations. 2. Impurity removal and filtration in the raw material production process, decarbonization filtration, and fine filtration of materials. 3. Ultrafiltration, RO, and EDI security filtration in the water treatment business, as well as filtration following ozone sterilization and ozone aeration. 4. Clarification and filtering of beverages, liquor, beer, vegetable oil, mineral water, soy sauce, and vinegar. 5. Filtration and recovery of ultrafine fine particles and catalysts, precision filtration following resin adsorption, and impurity removal and filtration of system heat transfer oil and materials, catalysis Gas rest purification, etc. are all processes used in the chemical industry to decarbonize liquid products, liquid raw materials, and pharmaceutical intermediates.
Sintered Filter Element Feature 1. Sintered filter element is surface filtration 2. Sintered filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Sintered filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Sintered Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Cylindrical Metal Filter Element Feature 1. Cylindrical metal filter element is surface filtration 2. Cylindrical metal filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Cylindrical metal filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Cylindrical Metal Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Sintered Mesh Filter Element Feature 1. Sintered mesh filter element is surface filtration 2. Sintered mesh filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Sintered mesh filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Sintered Mesh Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Sintered Porous Filter Element Feature 1. Sintered porous filter element is surface filtration 2. Sintered porous filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Sintered porous filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Sintered Porous Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
SS Sintered Filter Element Feature 1. SS sintered filter element is surface filtration 2. SS sintered filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. SS sintered filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life SS Sintered Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Stainless Steel Filter Element Feature 1. Stainless steel filter element is surface filtration 2. Stainless steel filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Stainless steel filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Stainless Steel Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Multilayer Sintered Filter Element Feature 1. Multilayer sintered filter element is surface filtration 2. Multilayer sintered filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Multilayer sintered filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Multilayer Sintered Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Metal Filter Element Feature 1. Metal filter element is surface filtration 2. Metal filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth 3. Metal filter element has uniform pore size distribution 4. Wire mesh will not shed in filtration process 5. High compression strength 6. High mechanical strength 7. High rigidity 8. High abrasion resistance 9. Good durability against most liquids, gases and aggressive steam 10. High temperature resistance 11. High filter rating accuracy 12. High filter efficiency 13. Good corrosion resistance 14. Washable and Cleanable 15. Reusable 16. Long service life Metal Filter Element Technical Parameter Raw Material: SS 316L, SS 304 Filter Media: ZWEN Sintered Wire Mesh Filter Rating: 0.5-300 Microns Filter Efficiency: > 99.99 % Operation Temperature: â?¤ 816 Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others Gasket: PTFE, Viton, Silicone, Buna-n, EPDM Connector: 1. DOE 2. 220 3. 222 4. 226 5. Thread (NPT,BSP,G,M,R) 6. Flange 7. Special customization Application Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry
Description PP Pleated Filter Elements are made of Polypropylene fiber media. PP Pleated Filter Elements provide excellent filtration efficiency and chemical compatibility across a wide range of liquid filtration process applications. The constitution of nominal PP Pleated Filter Elements adopt thermal welding techniques to seal all components, so no side leakage and optimizing PP pleated cartridge 100% integrity. PP Pleated Filter Elements have large surface area that allow for greater system flow rate and higher dirt holding capacity than depth filters. PP Pleated Filter Elements are widely used in prefiltration field requiring high purity. Feature 1. PP Pleated Filter Elements are manufactured in clean room and high cleaning environment 2. PP Pleated Filter Elements are low pressure drop, high capacity of impurities and long service life 3. PP Pleated Filter Elements are strict election materials which according to FDA standard 4. Ulti-layers structure, good filtration efficiency and consistent of performance for broad application range 5.The components of PP Pleated Filter Elements are assembled in fully sealed condition by thermal bond, free of binder Applications 1.Etchants 2.Chemicals 3.Cosmetics 4.Oil industry 5.Semiconductor 6.Food & Beverage 7.Medicine Filtering 8.Paints and Coatings 9.Prefiltration for RO/DI
Pall Filter Element HC8900FKP16H
Filter Details Filter Type: Pleated Media, Liquid OEM Name: PARKER HANNIFIN OEM Part #: PR3116Q
Parker filter elementpr3087q
Filter Element Features: 1. Material: fiber glass;oil paper;ss mesh 2. Filtration efficiency: 99.9% 3. Filter rating: 1-25 um 4. Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa 5. Application field: Lubricating oil & hydraulic oil system 6. O-Ring: NBR, fluoro rubber � Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Product Extension HQFILTRATION specializing in the production of imported high-efficiency hydraulic oil filter brands are : PALL filter element, HYDAC filter element, ARGO filter element, MAHLE filter element, FAIREY-ARLON-PARKER, INTERNORMEN, MP-FILTRI, DONALDSON, STAUFF, VICKERS , ALLISON , American Hankison series, British Domniek-hunter series, INDUFIL filter element, Ultyafiter series, Italy Hiross series, Germany Zender series, Japan SMC series, Italy BEA series, Sweden ATLAS- COPCO series, Sanling, Ivek, Detman, Perkins, Deutz, American CUMMINS , Japan YAMAHA , HONDA, IMC, Robin, MITSUBISHI , UK PERKINSROLLS-ROYCE, Bo Jones-Rolls Royce, Sweden Volvo-PENTA, China KAMA, yigtai, Demasson , Germany EATON Interton Mende Norman, DEMAG , DENISON , FuSheng , HAMM , VICKERS .
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
UTERS Interchange hydraulic Lubrication Oil Filter Elements are designed for use in filters that have been designed to operate in industrial and mobile hydraulic systems. They will protect hydraulic components from particulate contamination. Filter Element Features: Material: Fiber Glass;Oil Paper;SS Mesh Filtration efficiency: 99.9% Filter rating: 1-100 um Operating Pressure: 1.0Mpa, 2.0Mpa, 16.0Mpa, 210Mpa Application field: Lubricating oil & hydraulic oil system O-Ring: NBR, fluoro rubber Filter Element Application: The hydraulic oil filter element is an indispensable part of the pipeline series of the conveying medium. It is usually installed in the inlet filter of the hydraulic system to filter out metal particles and contaminants in the fluid medium and to protect the normal operation of machinery and equipment. The application range of hydraulic oil filter elements is very wide, covering almost all industries: steel, electric power, metallurgy, shipbuilding, aviation, paper making, chemical industry, machine tools and construction machinery, construction machinery and other fields. Quality Standard: ISO 2941------Collapse & Burst Resistant ISO 2942------Fabrication & Integrity Test ISO 2943------Material Compatibility with Fluids ISO 3724------Flow Fatigue Characteristics ISO 3968------Pressure Drop vs. Flow Rate ISO 16889------Multi-pass Performance Testing Package & Shipment Package: Plastic bag inside,Paper box outside.Usually we pack filter element by paper boxes.and use export standard wooden boxes or pallets for heavy goods. Shipment: Express For Small Package,and also could offer Express lines service for Southeast Asian countries, Central Asian countries,Middle East countries; Air Shipment could ship goods above 45 kgs with faster time; Sea Shipment could ship goods with big volume or heavy total weight,with longer time; China-Europe freight train could ship goods to the countries and regions along the route, the destination is in Europe.and could offer door to door service!
Product description 1. Material: pp, stainless steel, absorbent cotton fiber; 2. Precision: 0.5-100um; 3. Working temperature:, 90, , 4. Pressure: 20, 0.34mpa, 70 ,0.24mpa 5. Flow:632-1890l/min; 6. Efficiency: 99.99%. Feature--- pp melt blown filter cartridge for water filter 1. Set adsorption, filtration, intercept, catalysis in a body; 2. Acid, alkali, salt and different kinds of organic solvent; 3. Big flow, high filters efficiency, change convenience .Etc; 4. High filtrating precision, big flow, small differential pressure , high compression strength , big Quantity accept dirt . Non-toxic, tasteless , non secondary pollution. Advantages--- pp melt blown filter cartridge for water filter 1. Stainless steel pleated filter element has low pressure drop due to high porosity; 2. Easily cleanable and with long life-span; 3.Under iso9001-2000 quality certificate.
