Quick information Brand name: feiniuplace of origin: chinamodel number : 012application : industrialconductor material : copperinsulation material : xlpejacket : rubbertype : medium voltage Description Single mode ground wire opgw fiber optic cable Opgw is primarily used by the electric utility industry, placed in the secure topmost position of the transmission line where it , shields, the all-important conductors from lightning while providing a telecommunications path for internal as well as third party communications. Optical ground wire is a dual functioning cable, meaning it serves two purposes. It is designed to replace traditional static / shield / earth wires on overhead transmission lines with the added benefit of containing optical fibers which can be used for telecommunications purposes. Opgw must be capable of withstanding the mechanical stresses applied to overhead cables by environmental factors such as wind and ice. Opgw must also be capable of handling ele ctrical faults on the transmission line by providing a path to ground without damaging the sensitive optical fibers inside the cable.
Description: KSD simplex fiber optic cable comes with a single buffered fiber,aramid yarn strength members and low smoke zero halogen(LSZH)/PVC/TPU outer jacket. Application : 1. Terminated with various types of connectors 2. As pigtail of communication equipment 3. Suitable for communication equipment served Note: 1.Cables can be supplied with a range of single mode or multimode fibers. 2. The dimensions and raw materials can be designed according to the demand of the customers. 3. Standard Reel Length: 2000m/reel: other lengths available on request.
Fiber Loop back is designed to provide a media of return patch for a fiber optic signal; typically it is used for fiber optic testing applications or network restorations. For the testing applications, the loopback signal is used for diagnosing a problem. Sending a loopback test to network equipment, one at a time, is a technique for isolating a problem. Sophenol's SC Loopback Module provides a return signal for fiber optic equipment which can be using for testing purposes and isolating any network issues. Item Details: Connector Types Mode: Singlemode Fiber Mode: 9/125um Jacket Type: PVC Durability: Over 500 cycles (=0.2dB) Reflectance: Min. 20dB Applications : CATV, metro Test equipment Telecommunication networks Local area networks (LAN) Wide area networks (WAN) Premise installations Data processing networks Video and military active device termination Packing information : 200pcs put into a carton, the weight is 10kg, the carton size is 38x38x28cm.
Sophenol singlemode 9/125m fiber patch cable using impotred high technical polishing machines for low-less connections,and all cables are 100% optically tested for insertion loss. Item Details: Connector: LC to LC Jacket OD: standard 2.0/0.9/3.0mm Fiber Mode: 9/125m Jacket Color: Yellow Fiber Type: Duplex Jacket Material: PVC/LSZH/OFNP Applications: Date centre Telecommunication networks CATV LAN and WAN FTTX Broadband network EACH CABLE PACKED IN A ZIP-LOCK POLYBAG HOT-SEALED POLYBAG, TEST DATA KEEP IN BAG
Main technical parameters : * Optical fiber external diameter: 0.9mm, 2.0mm, 3.0mm are optional, and PC, UPC and APC are available, there are two kinds of single mode and multi-mode. * Insertion loss: 0.2dB * Echo Loss: PC 40dB,UPC 50dB,APC 60dB * Exchangeability test: 0.2dB * Vibration test: 0.1dB (10-60Hz, 1.5mm amplitude) * Tensile strength test: 0.1dB (0-15Hg tension, excluding 0.9mm optical fiber) * High temperature test: 0.2dB (+85 C, lasting 100 hours) * Low temperature test: 0.2dB (-40 C, lasting 100 hours) * Temperature cycling test: 0.2dB (-40 ~85 C, after 5 cycles) * Humidity test: 0.2dB (+25~+65, relative humidity 93%, 100 hours later) * Commonly used connectors: SC (large head)/LC (small head/FC (spiral port)/ST (card port) Scope of application : * Optical Fiber Communication System, Optical Fiber Access Network, Optical Fiber Data Transmission, Optical Fiber CATV, Local Area Network (LAN), Testing Equipment production of optical fiber cable : FTTH Optical Fiber to Home, Trunk to Home, FTTH Distribution Box, Corridor Box, Optical Splitter Box, Optical Fiber Stripping Clamp, Tail Fiber, Jump Line, Optical Fiber Adapter, Coupler, Fused Fiber Disk, Optical Fiber Panel, ODF Box, Adapter, Optical Fiber Flange, Optical Fiber Coupler, Optical Fiber Desktop Box, Optical Fiber Cold Connector, Optical Fiber Fast Connector, ODF Unit Box, Integrated Module, Optical Fiber Fused Fiber Communications products such as pipes, wiring frames, indoor and outdoor junction boxes, cabinets, etc. Specification parameter : Jacket material LSZH,PVC,OFRN,ORNP Fiber type SingleMode 9/125 Inserion Loss 60db Certification ROHS; ISO Length Customized Plug in and out 500 times Storage temperature -50 ~85
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct Buried type Fiber Optical Cables are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of Dry Water Block Technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel Tape Armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra Strength cable can also be delivered with Peripheral Strength Members. Features & Application òExcellent optical, mechanical & environmental performance òHigh strength-to-weight ratio òCSM dielectric type û Fiber Reinforced Plastic òDry block construction òHigh tensile strength òHigh crush strength òCorrosion resistance òKINK resistance òVery light weight òVery flexible & small bending radius òLong haul / backbone application òJunction communication systems òAll dielectric applications òCATV applications. Construction Parameters Fiber Count 02 û 144 Fibers Color of Loose Tube Blue , Orange , Green , Brown , Grey , White, Red & Black Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber Reinforced Plastic (FRP) û Non Metallic Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Second (Outer) Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
This cable has been designed for long haul direct / backbone application. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. Direct buried type fiber optical cable are designed for easy and economical installation. The stranded loose tubes contain thixotropic jelly but the cable core is based on dry-block construction. Incorporation of dry water block technology eliminates the need for traditional jelly filled water blocking methods, thus providing efficient and craft-friendly cable installation. The thixotropic jelly is used to fill the buffer tubes to prevent water ingress. Steel tape armoring provides a rodent protection, length markings in meters for easy determination of cable length. Extra strength cable can also be delivered with peripheral strength members. Features & application Excellent optical, mechanical & environmental performance High strength-to-weight ratio Csm dielectric type û fiber reinforced plastic Dry block construction High tensile strength High crush strength Corrosion resistance Kink resistance Very light weight Very flexible & small bending radius Long haul / backbone application Junction communication systems All dielectric applications Catv applications. Construction Parameters Fiber Count As per CustomerÆs Requirement No. of Loose Tube As per CustomerÆs Requirement G.655 As per CustomerÆs Requirement G.652 As per CustomerÆs Requirement Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Filler Material Medium Density/High Density Polyethylene (MDPE/HDPE) Central Strength Member Fiber/Glass Reinforced Plastic (FRP/GRP) Armoring Corrugated Steel Tape Armoring Peripheral Strength Member (if required) Aramid / Glass Yarn Core Moisture Protection Methodology Dry Block Design, Water Blocking Yarns/Tapes Outer Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Cable Delivery Length (km) 4 KM ¦ 3%.
Product description This cable has been designed for aerial application with flat type construction. Our stranded loose tube design provides stable performance over a wide temperature range and is compatible with any telecommunications-grade optical fiber. This aerial type fiber cable is designed for easy and economical installation with a sufficient tensile strength to overcome wind pressures and ice loadings. Features & application Excellent optical, mechanical & environmental performance Csm dielectric type û fiber reinforced plastic High tensile strength High crush strength Aerial application Application in lan, wan, especially in ftth networks Easy to clamp and install Can bear ice loads and high wind pressures. Construction Parameters Fiber Count 02 to 12 Fiber Fiber Type G.652.D Loose Tube Material Polybutylene Terephthalate (PBT) Loose Tube Filling Material Thixotropic Jelly Sheath Material High Density Polyethylene (HDPE) Printing on Outer Sheath Engraved Hot Foil or Inkjet Printing Nominal Dimensions Width : 7.0 + 0.5mm , Height : 3.5 + 0.3mm Nominal Cable Delivery Length (km) 2 KM + 3% . Mechanical Characteristics Tensile Strength (N) 600 Tensile Strength (N) (Installation) 1000 Crush Strength (N) 2,000 Minimum Bending Radius (mm) 75 Temperature Operating Range -10 to +70¦C.
Faraday rotators change the polarization state of light traveling through it.
Product Description: With the increasing application in the fields of aerospace, unpiloted, industrial manufacturing and communication, the application of the Polarization-Maintaining PM patch cord as a representative special product will usher in a larger market demand. In order to cope with the market development, HYC independently designed and developed a new type of PM connector with 360° ferrule adjustable, the PM angle can be controlled at ±1°, leading above the industry level. It also features high precision, low loss, and ultra-high extinction ratio, and is widely used in instruments or scenes that are sensitive to polarization. Features Low insertion loss High repeatability and high stability 360° ferrule adjustable, the PM angle can be controlled at ±1° Meets GR326 or IEC 61300-2 standards Applications Aerospace Unpiloted Optical fiber sensing Specifications of SC Duplex Connector: ItemsPM Optical Fiber Connector Connector typeLC,FC,SC Suitable fiberCladding 125um Ceramic ferrule spec125.0~125.5um Ceramic ferrule concentricity Operation temperature-40~+85 About HYC Co., Ltd HYC designs, manufactures and supplies a series of PM fiber optic connectors/patch cords. Get a quote from China's leading manufacturer of optical component. HYC offers a range of passive fiber optics products, optical fiber connectivity, WDM, PLC, and more data center solutions for your fiber optic connectivity solutions.
For all your solutions regarding optical fiber cable installations works and suitable equipments for installations , accessories like ducts , couplers , split metallic couplers , cable 'u' seals , pneumatic powered cable blow equipment ( indigenous designed , developed and marketed by us having good performance at field trials and in actual usage for the past two years). Wooden packing suitabe for shipment with PVC covered.
Single model optical fiber cable, direct burial cable with good impact-resistance and moisture-proof 3km per drum single model optical fiber cable or by customer's require
Cable capacity from 2~24 fibers; Drum length of 2km or 4km. Drum 1.1*1.1*0.9
Fiber optic Patchcord - LC is a small scaleization, demand but development that high thickness joins one kind of new connection box in order to meet client. It compresses in the entire electric network plank and room that wall plank and the flexibility cabinet needs, causes such the person who possess room merely considerably traditional ST and SC connection box in part. Intelligently the bright and beautiful corporation adopts well-developed technique and installation, and carrying on scale manufacture, the produce performance is good, and the quality is steady dependable. Distinguishing feature 1. The bulk is little, the dimensions accuracy is high 2.1.25mm the ceramics is trusted the rush pith 3. The insertion loss lets drop 4. Echo return loss is high 5. Two kinds of compositions in the single rush pith and twin rushes pith may feed the selection 6. Accord with IE874's criterion Application 1. Telecommunications and data news dispatch 2. Local area network (LAN) 3. Vast domain net (WAN) 4. Installation terminal end
This product is used as the terminal ending and distribution of the main, optical fiber cable of the central office in the optical fiber cable, communication system. It can realize the connection, distribution, and dispatching of the fiber circuit.And it is the distribution connection equipment between the optical fiber cable and the fiber cable communication system.
Fiber optic Faraday rotator mirror is a fiber optic device that can serve as both the reference mirror and the probing mirror. The device functions as a phase conjugate mirror by creating a phase delay of 90 degrees. This feature allows the mirror and the return path of the beam to automatically compensate for any induced birefringence the beam experiences during the first of leg of the travel. Therefore, the Faraday rotator mirror is an important part of the fiber optic Michelson Interferometer. The Faraday rotator mirror has been used widely to compensate for induced phase changes in many other waveguide applications. Faraday Rotator Mirrors are available pigtailed with 1 m of standard Corning SMF-28e+ single mode fiber. The fiber is mounted in a standard �?900 µm tight tube buffer with proper strain relief, and an optional 2.0 mm narrow key FC/PC or FC/APC connector is available. The Faraday Rotation Mirror is built with ALL-glass technique sealed process, it performs wide working wavelength range so that fit for various wavelength , it can rotate the input signal polarization state for 90°or 180° after reflect back ,widely used in sensor system.
Polarization maintaining (PM) patch cord / jumper leads are built with polarization maintaining panda fiber and connectorise using FC/UPC, FC/APC, SC/UPC, SC/APC and LC connectors. FC connectors can be supplied with wide key (2.14mm, N type) or narrow key (2.02mm, R key) width. Patchcords can be supplied in 250um bare fiber, 900um buffered fiber or 3mm cable. PMP features low insertion loss, high extinction ratio and high return loss. The slow or fast axis can be aligned to the connector key.
Adss cable (all dielectric self-supporting aerial cable) is loose tube stranded. Fibres are positioned into loose tube made of high modulus plastics. The tubes are filled with a water-resistant around frp(fibre reinforced plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound, it is covered witha thin polyethylene (pe) inner sheath. After two layers of aramid yarns are applied in two directions over the inner sheath as strength member, the cable is completed with pe or at outer sheath. Wooden drum or carton, 3000m to 5000m/drum or as you required
We are looking at approx. 582 km of fiber optic cable. Necessary documentation and additional information will be sent via e-mail.
It is used for high-speed Ethernet signal transmission, which can transmit network signals over a long distance through two-core cables, and is suitable for places where network cable transmission is inconvenient.