Model yg12 yg15 yg18 yg20 yg24 yg28 yg30 yg48 Output kg/hr 75 150 200 250 300 350 400 600 Motor hp 10 15 15 20 25 25 30/40 50.
Type 70 diam 40 rotation 350 Year of construction 2001 Engine 186 kw Capacity 800- 1000 kg/h 2 new screws Control panel Warranty for 6 months.
Year of construction 2003 Electrical fun Vibro screen Cutting head 30 Engine abb hp 450 Silos tecnova Control panel.
Need dosage Cutting head Vibro screen Change filter Year of construction 2010 Hours functioned 300.
Extruder omp 105 Diam 40 Vibro screen Cutting head tecnova Change filter Control panel Year of construction 2002.
Year of construction 2000 Electrical fun Vibro screen Cutting head tbs 10 Change filter 115 Engine HP 100.
We supply Co-rotating parallel twin screws extruder for PA/PBT/PC compounding with flame retardants and up to 30% chipped/long Glass Fiber, PC/ABS alloy, PP/PA alloy, PC/PB alloy, ABS color masterbatch. Salient Features of co-rotating twin screw extruder SAT52: 1) Main motor 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 300~400kg/h 5) One mixer, one main feeder and one side feeder 6) One soft water cooling system and one vacuum system 7) Strand cutting unit with water bath, air blower, pelletizier and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply twin screw extruder for PLA/PE filling with (cassava/corn/potato)starch, PBS degassing, PLA/PBS alloy and so on. Salient Features of co-rotating twin screw extruder SAT65: 1) Main motor 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-400rpm 4) The output capacity: 150~250kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Air cooling die face cutting system with cyclone and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply Co-rotating parallel twin screws extruder for PE/PP filling with high percentage of up to 82% CaCO3/ 60%Talc/70%TiO2/45%Carbon powder/and 30% inorganic and organic pigments. Salient Features of co-rotating twin screw extruder EC52: 1) Main motor 55kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 150~200kg/h 5) One mixer, one main feeder and one side feeder 6) One soft water cooling system, one vacuum system and one filter system 7) Strand cutting unit with water bath, air blower, pelletizier and classifier 8) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We supply Co-rotating parallel twin screws extruder for PE/PVC /HFFR/ (peroxide and silane based) XLPE cable material compounding. All the raw material will be feed into twin screw extruder first for compounding. Then falls into single screw extruder for cooling down and extrusion. Salient Features of two stage extruder EC65/TDD180 for PVC: 1) Main motor of twin screw extruder 90kw, L/D=40 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 400~600kg/h 5) One mixer, one loader and one feeder 6) One soft water cooling system, one vacuum system and one filter system 7) One single screw extruder with motor 55kw, L/D=9 8) Air cooling die face cutting system with cyclone and classifier 9) One control panel. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
We have two type of Lab machine: Lab22 and Lab30 with three type cutting system: strand, water ring and air cooling die face cutting. Salient Features of co-rotating twin screw extruder Lab22: 1) Main motor 4kw, L/D=42 2) One venting port and one vacuum port 3) Screw rpm: 60-600rpm 4) The output capacity: 5~15kg/h 5) One mixer, one main feeder and one side feeder 6) Strand cutting unit with water bath, air blower, pelletizier and classifier; 7) Control panel, soft water cooling system and vacuum system are inside the base of extruder. Painted with anti-corrosion oil, and covered with plastic film, fumigation cost is on Buyer's side, if any.
YDC Feed-through jacks are the new designed products in our company, are the upgrades of the primary jacks. 1.Using the new seals, to synchronous strengthen the seal-ability under great pressure. 2.Using special alloy steel with heat treatment process, reducing the cylinders expansion ratio in the tensioning process, so that the life of seals and sealing performance can be improved about 20%. 3.In the tensioning the operating process, jacks is easily damaged under overpressure because of the jack-based pullback cylinder, so we added the overpressure valve on the jacks to pressure production. Meanwhile we improved the original of commonly used structure by wire disc and flanged disc, to make the bearing capacity for oil pressure strengthen, so that enormously reduce the possibility of mechanical damage due to improper operation. In a word, the YDC series feed-through jacks performance is improved, and widely used in pre-stressing and post-stressing construction. Notice: according to users requirement, YDC through jack can be configured preventing turn device which can prevent jack from rotating in the process of stressing. Model: YDC 650 Stroke:200mm, Nominal tension: 600KN Nominal hydraulic:50Mpa. Net weight: 44kg.
GYJ series extrusion machine is the special equipment of making the P fixed- end anchorage. It is light and simple operation etc, and can squeeze BFM 15P and BFM13P extruding set. Model:GYJ 500 Rated extrusion pressure:495KN Extrusion hydraulic: 63Mpa Stroke:150mm Mass:70kg. Overall dimension:760x200x200.
YH30 embossing machine is the special extruding equipment of making the fixed-end anchorage, mainly used for extruding the fixed-end of prestressed strands into pear-shaped scattering shape. After replaced the wedge, it can be used for the other specification of steel strands. YH30 type embossing machine is small in size, light, and easy to operate. Model:YH30 Rated stressing pressure:30KN, Oil pressure:43Mpa, Stroke of extrusion:70mm Mass:11kg. Overall dimension:560x155x215.
Model - YRP 65 YRP 75 YRP 90 YRP 110 Screw dia mm 65 75 90 110 Output Kg/hr 55 75 120 190 Motor HP 10 15 20 30 . Atleast 1 unit.
Model YHDP65 YHDP75 YHDP90 YHDP110 Screw dia mm 65 75 90 110 Motor HP 10 15 20 25 Output Kg/hr 50 75 110 150.
Model YPR90 YPR100 YPR110 YPR125 item HD/LD/LLDP/PP/ABS/HIPS/PVC/PC/Nylon Screw dia mm 90 100 110 125 Motor HP 20 25 30 40 Output kg/hr 90 110 150 180. At least 1 unit.
1 The screw and cylinder are nitrogenation treated and precise processed. So it is hard, wearable and anti-cauterization. 2 The whole set adopts perch brake driving. So the rewinding is very smooth. 3 The electric part adopts brake driving. So it can help to save power 30%. 4 The noise is low, no dust, environmental and power saving. Installing Dimensions (m) 13¡Á1.3¡Á1.2 weight 2000kw.
Extruder: HDPE/MDPE pipe extrusion line adopts high speed and efficiency of single screw extruder.The screw has barrier unit, special material mixing components and new style of barrel grooves. The extruder is equipped with low noise fan, ceramic heating ring, high speed hard gear reducer; full-automatic vacuum loader. This configuration assures good plasticization and mixing effect. It also assures high speed, stable production and great output. Pipe Marking Line: It is extruded by single screw extruder SJ30/25 through the composited extrusion die. Die Head: The material of the die head is high quality 40Cr. It is the most advanced spiral or lattice die head in the world, which assures stable extrusion in the production process. In order to fit the performance of PE material and assure the stability of pipe diameter and roundness when producing thick-wall pipe with high speed, we adopt water film lubricating and water (or oil) circulation cooling. Vacuum Calibrating Water Tank: The body is made of high hardness and good quality stainless steel board. It has advanced water circulation and high pressure cooling system, vacuum adjusting equipment and accurate water temperature and water level automatic controlling system. The accurate bronze calibrating sleeve ensures cooling speed and molding pipe. It can be three-dimension adjusted up & down and left & right. Water Spray Cooling Tank: The body is made of stainless steel and the ductcoat is transparent soft PVC curtain. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjustable up and down. There is roller in the tank. Haul-off Machine: We can offer two tracks, three tracks, four tracks, five tracks and six tracks Haul-off machine according to different diameter and wall thickness of the pipe. It adopts frequency conversion. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic and mechanical combination clamping. The bearing has special structure which can effectively reduce the installation error. Cutting Machine: It is automatic dustless cutting machine. Smooth cutting section, synchronous frequency conversion drive, high accuracy and low noise. Large diameter pipe uses full-automatic planetary cutting machine. It is synchronization with the whole production line. The flexibility adjustment for the blade place and cutting depth assures cutting machine reliability. Control System: We can offer SIEMENS PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use SIEMENS electrical parts, Omron temperature controller. Intelligent control makes the operation simpler.
Extruder: It has high speed high efficiency screw, hard gear surface, FUJI invertor. This structure assures the material evenly heating, good plasticization and the extruding speed and efficiency. Corrugator: Close structure. Mold blocks through the gear transmission. Mold plate has water flowing to get cooling efficiency. The pipe cooling type is wind. This structure ensures high speed production and cooling. It can produce inner and outer layer smooth and corrugation uniformity pipe one time matching the corresponding molds. Mold block: The design of structure is reasonable, wind cooling and replacement of the module is convenient and reliable. Winding machine: Torque motor, single/double station winder.
