Ethernet Suppliers and Manufacturers

EDAM-9052 8 DI and 8 DO channels Digital I/O Module * Support Modbus/TCP,TCP/IP,UDP,ICMP,ARP * Ethernet 10/100 Based-T Communication * Support 8 isolated digital output with Open Drain. * Provide 3A/per output channel. * Provide Pulsed/delay Output Mode * Support 8 Isolated digital Input Channels * Provide Counter/ Frequency Inputs Mode * Support Dry Contact Inputs * Fully Photo-Isolation 3750Vrms

4 high-powered RJ-45í»s port of 10/100Mbps self-adaptive (Auto MDI/MDIX) 1 100M(single-mode/multi-mode)optic port Providing table top and frame type install Support VLAN and Trunking Buffering:1M Address table filtrate:1K Follow the fast Ethernet standard of IEEE802.3 10BASE-Tí»s Ethernet and IEEE802.3u 100BASE-TX Support all protocol in public, eg: TCP/IP, IPX, XNS, Appletalk, Vines, DECnet, ARP, DECLAT and Lansoft etc. 4 10/100Mbps self-adaptive ports (Auto MDI/MDIX) 1 100M(single-mode/multi-mode)optic port The self-diagnostic function can obviate network mal-function Providing table top and frame type install High speed cascade connection port used to link higher layer Switch or other device The dynamic buffering equipped by equalizing network load and to prevent the f blockage from losing All ports possess self-adaptive and full /half-duplex ability The face plate indicator lights keep watch on the work state, hence overall SmartWatch function can simplified the solving of malfunction Choose fast storage, transmit and directness transmit mode automatically in order to reduce the delay Provide the maximum bandwidth to 1Gbps, 100% transmit data rate Filter broadcasting storm Line speed is filtrate / transmit Support VLAN and Trunking The dynamic bandwidth equipoise Automatic MAC address learning function The entire compatibility standard of Ethernet application Specification: Network standard: IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX Network protocol:CSMA/CD Data transmit speed: Ethernet: 10Mbps(half-duplex) 20Mbps(full duplex) Fast Ethernet: 100Mbps(half-duplex)200Mbps(full duplex) Topology:Star Line type: 10BASE-T: unshielded twist pair (UTP) 3,4,5 (max length:100 m) EIA/TIA-568 100 ohm screens twisted pair (STP) (max length:100 m) 100BASE-TX:Not screen the twisted pair (UTP) 5 (max length:100 m) 100BASE-FX:Single-mode/Multi-mode fiber(max length:80m) Port:4 10/100Mbps auto-negotiate ports plus 1 100M fiber port(choice Single-mode/Multi-mode ) Physical and the environmental specification: Input voltage:5V DCIA outside general power Power consumption:5W The work temperature:0-50íµ The storage temperature:-25-+55íµ Environment humidity:5 % - 90% non-condensing Size:171mm x 98 mm x 27.8mm Table mini type Performance index: Swap mode:storage transmit and end to end Buffering:1M Address table filtrate:1K Transmit/-filtered rate:line speed, 148,800 bps ( 100Mbps ) per port MAC address table:Self-study, self-refresh MAC address aging time:10-1000000 seconds (default 300)

>Ethernet splitter 1 to 2 convert and increase your Ethernet connections from 1 male plug to 2 female sockets, Convert a single RJ45 outlet jack port to two RJ45 sockets easily, The speed of each cable group (1 and 2) can only reach 100 megabytes. And the signal transmission of the two cable groups does not interfere with each other. 4>Ethernet cable splitter uses gold plated needle core, metal shield, and fixed RJ45 interface, shielding the outside world EML, RFI Such as electromagnetic interference, the transmission signal is more stable to ensure that the signal transmission.

The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V, 0~10V, 4~20mA, 0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system.

Model noï¼?S281 The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.

Gigabit 8 SFP2 Ethernet Media Converter Feature * Commonly used in network series or cascade occasions, with 1000M optical port and the second line on the joint optical port * Card type or independent structure for centralized management 2U Aluminum rack * Operating Mechanism broadcast filtering, address auto-learning and auto-update feature and store and forward * Often cache size is 512KB, address table size is 4KB * Ethernet 10Base-T or 100Base-TX to 100Base-FX fiber media converter * Support IEEE 802.3U, IEEE 802.3X, IEEE 802.1d protocol * Supports full-duplex flow control or half-duplex backpressure flow control work, and with auto-negotiation (Auto Negotiation) capacity * Electrical ports support 100Mbps, 10Mbps, electrical interface can be used at both ends do not match the same rate (when full duplex wire-speed bandwidth 2XMbps) * Missing link to provide remote diagnostics, electrical and optical interface port link diagnostic link connection, dynamic data transmission, full / half duplex, speed indicato * Provides dual RJ-45 electrical ports support automatic cross-connect switches, hubs * Optical interface characteristics, compatibility, high reliability Application Environment Urban Intelligent Traffic Monitoring System (ITS), Safe City Highway monitoring system, electronic road monitoring, network cameras Large industrial enterprise security monitoring system, network multifunction system Remote multimedia teaching / campus monitoring, remote network video conference system Technical Specification Product Name 10/100/1000M 8-Port SFP Media Converter Model ES1000-2G-8F Description 1000M 8-Port SFP Media Converter Media Converter Ports 2 10/100/1000Mbps copper RJ45 Port + 8 10/100/1000Mbps SFP Port Transmision Distance 20Km Optical Fiber Multi-level series type, LC, 1310nm/1550nm Fiber Bandwidth 1.25G,10G Ethernet Bandwidth 1000MHz Network Media 100BASE-TX/1000BASE-TX:super cat.5 UTP Cable Standards IEEE 802.3i, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.1af DTE Power via MDI Forward Mode Store and Forward Environment Operating Temperature: -20 ~ 55 C Operating Temperature: -20 ~ 55 ° C Operating Humidity: 5%~9%,non-condensing EMI Compatiblity FCC Class A, CE Power DC 5V3A Demension 200mm*127mm*30mm Warranty 2 year warranty

Key Features: 9-port 10/100M base-TX ethernet switch with 8 POE+ Fixed Vlan mode and normal Mode Can be shifted by one key Loop detection Led indicates the Loop State each port is fully ieee802.3af/at standard compilant up to 30watts POE+

1. With 5x10/100/1000BaseT(X) ports 2. Redundant dual 12/24/48 VDC power inputs, Built-in over-current protection, Reverse connection protection 3. -40 to 75C operating temperature range (WT models) 4. No fan, low consumption, industrial design standard, industrial grade electronic components, environmental protection & lead-free production 5. Hard aluminum alloy case (Not sheet metal), DIN-rail and wall mounting 6. IP Rating up to IP40 7. No packet lost in 72 hours full load traffic testing

S2700 Series Switches FE downlink ports and GE uplink ports Switching capacity of up to 64 Gbits Intelligent Stack for simplified network configuration and management Highly scalable and energy-efficient, S2700 Series Switches provide Fast Ethernet 100 Mbit s speeds for enterprise campus networks. Combining advanced switching technologies, Versatile Routing Platform (VRP) software, and comprehensive built-in security features, this series is well suited for building and expanding future-oriented Information Technology (IT) networks. Our company involves voice communications, video conferencing, data communications, server storage, network transmission, wireless secure transmission access, UPS, cloud computing, worker intelligence and other Internet of things and Cisco switches, video conferencing, servers and other integrated solutions of the whole chain products. If you have any need, please contact me. Looking forward to cooperating with you!

Model: 3850-48P-S Flash Memory Installed Size: 2 GB Interface: RS-232 Connector Type: Type A Comments: PoE+ PoE Power: 30 W Type: Network stack device Authentication Method: Kerberos, RADIUS, Secure Shell (SSH), TACACS+ MTBF: 241,050 hours Status Indicators: PoE, Port duplex mode, Port transmission speed, Status, System Ports Qty: 48 Subcategory: Network hubs and switches Power Over Ethernet (PoE): PoE+ Advanced Switching: Layer 3 Manageable: Yes Form Factor: Desktop, Rack-mountable Jumbo Frame Support: 9198 bytes Subtype: Gigabit Ethernet PoE Budget: 435 W Frequency Required: 50/60 Hz

Introduction : The GCAN-205 module is a CAN-Bus converter, used for Ethernet and CAN-Bus connection. It is an industrial-grade CAN-Bus converter, whose function is to realize bidirectional conversion between CAN-Bus and Ethernet of Modbus TCP protocol. Hardware Features : 1. High speed 32-bit industrial grade processor ; 2. Embedded Watchdog timer ; 3. External voltage (DC+24V, 40mA) ; 4. Electrostatic discharge (ESD) Immunity level: Contact Discharge±2KV, Air Discharge±15KV ; 5. Fast transient Burst Impedance Level: ±1KV ; 6. Surge immunity level: ±1KV ; 7. Working temperature: -40.00~ 85.00 ; 8. Working humidity: 5%~95%, no condensation ; 9. Dimensions: 115mm (L) * 100mm (W) * 22mm (H) ; 10. Support customization and OEM

Intel Processors, Server Products, Intel NUC. Wafers Chips Processors, Server Products, Intel NUC ,wireless,Ethernet Products,Intel eASIC Products,Memory and Storage,Graphics

Flowers.

Port 30w per port 19" poe midspan injector • ieee802.3at detection • full power 250w: 30w per port • full protection otp, ocp, ovp • 1, 4, 8, 16, 24 ports optional Security cctv camera 1pcs/box

Display type: mono stn lcd Display color:16 shades of blue Display size: 5.7¡± (diagonal); display area is 117.2 x 88.4mm Number of pixels :320x240; number of 8x8 characters displayable is 40x30. Input power: 24vdc15% ; less than 20w Ram :512 k bytes Cpu :32 bits risc Battery backed memory:512 k bytes Com1 9-pin female connector: rs232/rs485 Com2 25-pin female connector: rs232/rs422/rs485 Multi-functional port 26-pin connector to: printer or 64 external keys Ethernet:yes External dimensions (mm) 195(w) x 145(h) x 59.1(d) Cut-out dimensions (mm) 185.8 x 135.8 Weight 0.81 kg

Fiber optic switch 24 10/100m auto-negotiation rj45 ports Complies with ieee802.3/802.3u ethernet standards Full and half duplex support Provides non-blocking and non-head-of-line-blocking forwarding Easy read led indicators for installation and operation diagnostics Flow control: full-duplex complies with ieee802.3x, half-duplex complies with backpressure Support auto mdi/mdix Broadcast storm filtering control 19 inch standard steel case Cabling type: 10base-t: 3, 4 or 5 sort stp/utp 100base-t: 5 sort stp/utp Transfer model: preservation and transferred Transfer band wide: 100base-tx: full duplex 200mbps; half duplex 100mbps10base-t: full duplex 20 mbps; half duplex 10 mbps Transfer rate: 10base-t: 14880bps per port100base-tx: 148800bps per port Led indication: two indicators for each port (link/act, 100m)

TRX E1-10/100Base-T developed by Hengguang Technologies, employs the clarity E1 transmission channel in accordance with ITU-T G.703 advice and IEEE802.3 standard with independent intellectual property. It is a kind of remote transmission equipment transmitting 10 Base-T data. With an independent structure, TRXE1-10Base-T can transmit 10Base-T data through E1 channels and extend work distance of the interface between two Ethernets through E1 channels such as optical fiber, microwave DDN nets and so on. It can use the existing communication network structures and interfaces efficiently without impropriating optical fiber core or additional equipment.

Diversified interfaces including SFP+ TO SFP+, SFP+ TO XFP, XFP TO XFP, Supports 3r (re-generation, re-timing, re-shaping) Fiber mode converter between fiber to fiber 10gbps equipment, or fiber repeater for long distance transmission 1310nm /1550nm/cwdm/dwdm optical wavelength conversion. Oeo for network backbone(san, lan, man) Support 2u rack (16 channel) and standalone use Support jumbo frame Transmission rate:9.95gbps-11.35gbps Support hot plugging . Standard package

10gbps fiber to copper media converter for long distance transmission Network management function web snmp console Support dmi function for sfp+ fiber module Support itut prescribed dwdm/cwdm wavelength Media converter for network backbone(san, lan, man) Support 2u rack (16 channel) and standalone use Support jumbo frame Sfp+ fiber module detection, utp cable length detection Support hot plugging Type: rj45 to/from sfp+. Standard package per customer