*Spotlight *Soft light *Single blinking light *Twin blinking light *Spotlight with single blinking light *Soft light with single blinking light *Spotlight with twin blinking light *Soft light with twin blinking light *Equipped with 12V Automobile Cigarette Light Plug *The item can be charged. Power Source:6W Length of the lengthening line:3m Power Supply:Using 6*1.5V size í¦Cí¦ (UM-2/R14) batteries or inserting the car plug into a 12V Cigarette Lighter Socket Dimensions:290*100*60mm
High quality and reliable Can be used with electronic or electromagnetic ballast Suitable for continuous and stand-by-mode operation Universal lamps : ts , ts and all compact fluorescent lamps Rated load from 7 to 58vv Voltage 23ov-24ov & 50 / 60 hz Operation time depends upon battery 2 , oah and4 , 5 ah rechargeable nimh or ni-cd high-temperature battery Suitable for single and dual electronic circuits and any kind of ballast Stand by and function control with led Not suitable for lamps with build-in-glow starters
Ac/dc mode 20w/t8 fluorescent tube or 60 led light Emergency & automatic light-up Handle/wall mounting Pull cord Built-in 6v4ah lead-acid battery Full change: approx.24hours Duration: approx.4hours Product size: 11.5x9x70.5cm, 1567g weight Packing: color box, 72x28x25cm/6pcs, 11.4/9.4kgs, 3360pcs/20f+
Dc mode 2x6w/t5 fluorescent tube or 21 led light Emergency & automatic light-up Handle/wall mounting Built-in 6v4ah lead-acid battery Full change: approx.24hours Duration: approx.3.5hours/2 tubes; 6hours/1 tube Product size: 9x8x30cm, 851g weight Packing: color box, 43x31.5x38cm/20pcs, 19/17kgs, 10000pcs/20
Led rechargeable emergency light Dc mode 60 led (mini size) Emergency & automatic light-up Handle/wall mounting Pull cord Built-in 4v4ah lead-acid batteryadjusted light bright (higher/lower) Full change: approx.20hours Duration: approx.4hours of steady light
Dc mode 2x8w/t5 fluorescent tubes or 30 led light Emergency & automatic light-up Handle/wall mounting Single or double tubes Built-in 6v4ah lead-acid battery Full change: approx.24hours Duration: approx.3hours/2 tubes; 6hours/1 tube Product size: 9x8x42cm, 1198g weight Packing: color box, 43.5x34.5x30cm/12pcs, 16.4/14.4kgs, 7000pcs/20f+
3.6V 4.5Ah Ni-cd batteries White LED (2*40pcs) Protection level IP20 Emergency operation time 3 hours
Product features: 1. The light source uses SMT LED, which makes whole light more efficient, long-lasting, energy saving and low consuming. 2. With advanced engineering plastic ABS, the ground and refined casing is heat-proof and vandal-proof. 3. With PMMA, the transparent parts have high transmittance. Light is even rather than dazzling. The surface is frosted to prevent scratches. 4. With 5 level lighting modes(namely high light, working light, weak light, flashing light and stroboflash light) to adjust lighting, it can meet many needs such as lighting, walking, rescue instruction, etc. 5. With precise construction design, it is not only delicate but with good protective performance. IP65. 6. Warm white light source makes lighting more comfortable. Each unit can cover at least 15 square meters. 7. Containing magnet, it can adhere to any iron metal material. 8. Battery is charged by common port, which is simple and easy. By presetting over-charge, over-discharge and short-circuit protection, the product is guaranteed reliable long lifetime. 9. Hand-held, ceiling-mounted, magnet-adhered, it’s easy to light. Specifications: Main parameters Value lithium battery 1 Power W 5 2 Working voltage V 3.7 3 Battery capacity Ah 1.8 4 Waterproof level / IP65 5 Corrosion-proof level / WF2 6 Life time Battery cycles 1000 Light h 100000 8 Working hours Strong h 5 Normal working light h 10 Weak working light h 15 9 Dimensions Height mm 40 Diameter Of Lamp Cap mm 70 10 Weight g 90
Jy-158 Battery:4.0v/0.6ah sealed rechargeable battery Led:15pcs Packing:120pcs/ctn Duration time:approx 12hours We are a chinese manufacture of torch (flashlight) in ningbo china; we specialized in all kinds of torch: rechargeable torch series, strong-light lamp series, lamp light series, which have a good market in europe, america, and southeast asia .India. Middle east, hong kong, taiwan etc. And now we have the brand name: hoya jj, jy-super, hd-hongda, which sales very good in the middle east market... At meantime we agent for yajia torch, and here we looking forward to expand our business. If you are concern, please contact us. Jy-158 Battery:4.0v/0.6ah sealed rechargeable battery Led:15pcs Packing:120pcs/ctn Duration time:approx 12hours
Product name:LED flare light with strong magnet Model ASLED-1 Power supply1pc 9v-Battery Size(Dia.*H.):8.5*5.5cm Color :Amber/white Material:ABS+PS Lamp Type:LED(12pcs contained) Working mode:flashing Working time: as least lasting for 48 hours.. Feature: 1)waterproof. 2)magnetic warning lights(2 magnets contained) Application :Universal cars.. TypeOutdoor / roof emergency light Warranty :1 year Payment term :Paypal,Credit card,T/T,E-check.. Function: For a vehicle breakdown, an emergency light source can help you. --Flashing amber, for warning -- White light, for lighting.
Led Solar Camping Emergency Light, -
Description The emergency fixture with sensor works under normal supply of AC power, it has 7 adjustable levels of emergency watts(3.6w, 6w, 10w, 12w, 15w, 17w, 20w set up by SET button ). Emergency time can be 90mins, 2 , 3 ,4 , 5 ,6 hours or customized; when it works with microwave sensor, it will 100% light on when movement object gets close ( sensor distance is 3-12 meters(can be set by Jumper), and sensor angle is 120-160 degree ), and switch to 20% (default value ) twilight when movement object leaves after 5s,30s,90s,3mins(can be set by Jumper);When AC normal supply shortage, the emergency fixture automatically switch to battery power supply to keep light on. At the same time, microwave sensor still detect object movement, if no movement detected, the lighting will switch to 3.6-20w emergency. This emergency fixture with sensor can also work as led sensor fixture (remove the battery pack) or work as led normal waterproof fixture (remove the battery pack and sensor). It widely used in tunnel, Rail-way station ,Metro station, Supermarket, stair well, corridor, evacuation passage, especially parking lots. Features 1.Adopt high-grade PC base and PC cover fitting, good quality seal for better waterproof, high transmittance frost cover(>88%),IP65 protection rate 2.Surface mounted or hanging installation option 3.Using high brightness SMD2835 led chips as light source 4.Adopt High Temperature Ni-Cd or Ni-Mh battery pack 5.Microwave sensor dimming function 6.Emergency watts adjustable:7 levels , 3.6w-20w 7.Emergency duration :90mins, 2h , 3h ,4h… or depend on sensor occupy 8.Available in 2ft 20W, 4 ft 36W and 5ft 44W 9.Approved by CE ROHS SAA and C-tick(RCM)and AS2293.3 10.3years warranty.
Product feature: *This is a rechargeable portable multifunctional LED lights * It's a power bank, connect the USB port, able to charge the mobile phone * Set a compass, hardly missing traveling in outdoor. * Dimmable, six dimmer adjust the lamp brightness. * small size and easy to carry, set a pothook, able hang in tent using for outdoor camping * waterproof level can reach IP65, safe to use in the rain * Car used emergency light with magnet, when the car have an incident or have some problems in the night, the lamp can absorb on the car to check, with SOS alarm function, warning vehicles pay attention to safety. * family emergency light. Application: Portable LED emergency light with many functions, such as camping in outdoor, check the car in dark night. Etc. Dimension:133*39*32mm Product Net weight:186g pcs/ctn:30pca/ctn GW/NW:6.92kg/3.654kg Packing:1pcs/neutral packing
-as a multi-functional smart down light, it has the functions of general lighting and emergency lighting. When the main supply is normal, it can be used as daily lighting and the light-on/light-off is controlled by the switch; when the main supply is cut or the voltage of the main supply is lower than the working voltage of the product driver, the internal battery of the luminaire can provide more than 120min of emergency lighting. -the high-lumen smd light source technology and the aluminum heat dissipation structure (bottom ventilation) prevent decaying caused by the heat. -high luminance output. -energy saving and environment friendly. -external driver with terminal connect wire for easy assembling and dismantling during replacement. -luminaire housing fireproofing grade vo.
Impact resistant abs Can lighting 6~7hours when it is full of power Modeling simple amd generosity Color box
Surface emergency lighting with (48)led A class energy saving thanks to led lighting Operating voltage: ~85-265 v/50 hz Operating mode: continuously and emergency Lighting load : 48x2000 mcd 120° Standby time: 3 hours Battery tipe: 3x1.2 v 2700 mah aa Operating temperature: -20°c ~ +40°c Protection class: ip 20 Emergency lighting load: 130 lm Warranty :2 years
We offer fine quality lights. These are also made available in customized dimensions. We use high quality raw material for manufacturing these light under the supervision of the skilled team of professional they ensure its durability and working ability.
APPROVED DGT Approved in 2021 to replace the triangles. - Mandatory from 2023. - Greater security: This light implies greater security than the emergency triangles. It can be placed on the roof without having to leave the vehicle. - The energy of any V-16 light comes from an alkaline battery that gives it up to 2.5 hours of autonomy in EMERGENCY mode, without the need for wiring.
Emergency lighting products Emergency exit signs Product: emergency exit sign Light source: 5x0.05w leds Batteries: 1.2v 600mah ni-cd batteries Emergency duration: 1.5 hours Recharging time: about 24 hours Material: metal frame + acrylic Size: 380x210x25mm
Vm emergency tube light 20w pc housing 600mm with 10mm mcpcb slot high lumens efficiency 120lm/w 4kv 440v protection double layer circuit bms ic inbuilt for battery protection bis approved lithium battery 3. 7v and 5200mah charging time 8-10 hrs backup time 3-4hrs 1 yr replacement warranty
