Please provide a quotation to the following requirement from importer -
Product Name: Electrolytic Copper Cathode
Specifications :
Standard Cu Cathode-1, Purity 99.99% (Rejection Below 99.97%)
Dimension: 914m X 914mm X 12mm
Weight Of Each Sheet: 125kgs (+/- 1%)
Net Weight Of Each Pallet: 2mts (+/- 1%)
Min. Weight In Each Container : 20 Mts Approx
Gross Weight Of Each Container: 22.20 Mts Approx
Qty: Trial Order: 5,000 Metric Tons
Monthly Orders: 10,000 To 15,000 Metric Tons X 12 Months With Rolls And Extensions
Total Quantity: 125,000 to 185,000 Metric tons
CIF Price: Minus -20 to -18% LME/Per Metric Ton
Packaging Terms : Palletized banded by aluminum bands
Specifications:
Low-concentration zirconia oxygen analyzer (sensor based on zirconia cell) for measuring O2 from ppm levels up to percent/volume ranges.
Usage : precise monitoring and control of oxygen concentration in processes — semiconductor manufacturing, inert-gas atmospheres, furnace/heat-treatment atmosphere control, combustion control, leak detection into inert gas, etc. Good where fast response and long sensor life are needed.
Buyer is interested to receive quotations for the following RFQ -
Product : Electrolytic Copper Cathode
Material: Electrolytic Copper
Purity: 99.99% Cu (minimum)
Origin: Unspecified
Chemical Composition: Total Concentration Of All Impurities = 65ppm (typical Value = 25ppm). Copper Obtained By The Difference Between 100% And Total Impurities
Element Specified Typical
1.1. Product Specifications:
Standard Lme (london Metal Exchange) Grade A Copper Cathode
Se Te Bi Sb As Pb Fe S Ni Sn Ag Zn Co Cr Mn O2
Less Than 1.0ppm Less Than 1.0ppm Less Than 0.5ppm Less Than 1.0ppm Less Than 3.0ppm Less Than 1.0ppm Less Than 5.0ppm
Less Than 10.0 Ppm Less Than 5.0ppm Less Than 1.0ppm
Less Than 12.0 Ppm Not Specified Not Specified Not Specified Not Specified 100-600 Ppm
Less Than 1.0ppm Less Than 0.5ppm 0.20 Ppm Less Than 1.0ppm 1.2 Ppm 0.3 Ppm 2.8 Ppm 4.5 Ppm Less Than 1.0ppm Less Than 0.5ppm 8.0 Ppm Less Than 1.0ppm Less Than 0.5ppm Less Than 0.5ppm Less Than 0.5ppm 200 Ppm
The Value Specified Is In Accordance With Standard Astm B 115-00
Form: Sheets (cathodes)
Surface Appearance: The Surface Of The Cathode Should Be Reasonably Free Of Nodules And Foreign Matter, Such As Copper Sulfate, Grease, Oil And Sludge Residue. Dimensional Aspect: Approx. 914mm X 914mm X 12mm
Weight Per Cathode: ~125 Kg (+/- Tolerance)
Bundle Weight: ~2,500 Kg
Packing: Palletized And Strapped For Containerized Shipping
Standard: Compliant With Astm B115 / Lme Grade A
Quantity: 400k Mt Per Month; And 300k-500k Per Month
Please provide a quotation to the following requirement from importer -
Product name - Electrolytic Cathode
Specifications :-
Type - Grade-Cu-CATH-1
Applicable for- Cu-DHP, Cu- DPA and Cu-ATP - form Refinery Shape - TEST RESULTS
Chemical Composition PHYSICAL PROPERTIES
Cu +Ag (%) : 99.99 Bi (%)
Payment Terms:
No Down Payment Accepted. Payment Guarantee Transferred Documentary Credit MT720 only. Final payment via TT/MT103. Do Not Contact Us For Any Other Payment Terms, As We Will Reject Your Offer At First Glance
Destination:
China
Looking for suppliers from:
Worldwide
Product Description
Buyer is interested to receive quotations for the following RFQ -
Product Name: Electrolytic Copper Cathode
Specifications :
Grade A
Lme 99,99% Rejection Below 99,97
Origin: South America, Africa (DR Congo and Zambia), or any non-sanctioned country.
Quantities:
Trials 500-1,000 MT
Contracts: 12 x 2,000-50,000 MT per month
Procedure:
1. Buyer sends LOI.
2. Seller sends FCO with POP Video/Images, Processing Process, Past Records (Sanitized) of international delivery (China and Singapore preferred)
3. Buyer sends ICPO with company registration and signatory passport, and banking details after successful Due Diligence.
4. Seller sends draft contract. Both parties negotiate the final contract. Contract signed and shared mutually.
5. Contract lodged by the buyer's and seller's bank for transfer of documentary credit via MT720 - PLEASE Do Not Contact Us If This Is Not Your Payment Method.
6. Seller Will Deliver Goods As Per Contract CIF ASWP China / Singapore or FOB At An Internationally Recognised Bonded Warehouse In Dar Es Salaam / Durban And Present The Certificate Of Title Of Goods Against Warehouse Receipt, And Copies Of Certificate Of Origin, Export Documents For Buyer's Warehouse Approval And Verification.
7. Buyer Entrusts CCIC/SGS/ASI With Inspection.
8. After Successful Inspection Seller Submits The Original Certificate Of Origin, Export Documents, And Transfer Of Cargo Rights Against Confirmed Payment Release TT or MT103 By The Buyer's Bank As Per Contract.
International Sellers Are Welcome. However, Sellers With Registered Accounts At Internationally Recognized Bonded Warehouses (CEVA Logistics, Steinweg, Cosco, Access World, etc.) Will Be Given Priority
Payment Terms : No Down Payment Accepted. Payment Guarantee Transferred Documentary Credit MT720 only. Final payment via TT/MT103. Do Not Contact Us For Any Other Payment Terms, As We Will Reject Your Offer At First Glance
Payment Terms:
SBLC (Standby Letter of Credit) / MT103 Payment
Destination:
China
Looking for suppliers from:
Worldwide
Product Description
Please quote for the following wholesale product requirement -
Product : Electrolytic Copper
Specifications:
Quantity: initiate with a trial order of 1,000MT, followed by ongoing monthly purchases of around 30,000MT. There is potential for larger volumes depending on the supplier’s capacity.
Quantity Required : 1000 Metric Ton/Metric Tons
Shipping Terms : CIF
Destination Port : China
Payment Terms : SBLC (Standby Letter of Credit) / MT103 Payment
Please quote for the following wholesale product requirement -
Product Name: Electrolytic Copper
Specifications :
Quantity: Trial Order For 10,000 Tons, Monthly Order For 30,000 Tons Per Year
The Standard Of No.1 Electrolytic Copper:
National Standard GB/T 467-2010, European Standard BSEN 1978:1998, American Standard ASTMB115-00(R2004).
The grade of No.1 Electrolytic Copper:
Cu-CATH-2+ With Copper And Silver Content Not Less Than 99.95%.
The Definition Of No.1 Electrolytic Copper:
Electrolytic copper that conforms to the standard of Cu-CATH-2 is defined as No.1 Electrolytic Copper.
The Specification Of No.1 Electrolytic Copper:
The Length Of The Electrolytic Copper Plate Is 900 - 1030mm, The Width Is 740 - 1000mm, The Thickness Is 7 - 16mm. The Weight Of Each Copper Plate Is 55 - 140 Kg, And The Bundle Weight Is About 2.5 Tons
Buyer is interested to receive quotations for the following RFQ -
Product Name: Spare parts kit for CSI 2140 2 Channel Technical Condition Analyzer.
Specifications:
One product package includes:
1 cable for accelerometer 2 PCs
2 accelerometer 2 PCs
2-pole 3 magnet for accelerometer
4 Transport case 1 PCs
5 Set of documentation 1 set.
Design features of the product:
Cable for accelerometer.
The cable is spiral, vibration-resistant, durable, designed to connect the accelerometer to the analyzer. Sealed cable connector with unload tension reduces cable wear.
On one side (one end) of the cable there is a 5-pin M12 plug connector for connection to the analyzer (not explosion-proof). On the other side (second end) of the cable there is a 2-female MIL-DTL-5015 female connector for connecting the accelerometer. Cable length 1,83 m.
2. Accelerometer.
Universal accelerometer with high measurement accuracy and proven multi-point calibration. High-end accelerometer for use with analyzer.
Accelerometer characteristics:
-Sensitivity (± 5%) 100 mV/G (10,2 mV/m/s²)
-Measurement range ± 50g (± 490 m/s²)
-Frequency range (± 3 dB) 0,5-10,000Hz (30-600 000 Imp/min)
-Relative transverse sensitivity = 7%
-Voltage/excitation current 18-28 V DC
-Weight = more than 51 grams (1,8 oz)
-Working temperature from-54 °C to 121 °C
-5000G impact overload limit Max. (49050 m/s²)
3. 2-pole magnet for accelerometer.
The magnet is designed for fastening on the accelerometer.
Specifications 2-pole for accelerometer:
-Small magnet;
-Magnet diameter = 20mm
-Magnet weight = 0,15 kg
-6,35mm threaded hole in magnet
-Curved magnet surface.
4. Transport case.
Durable transport case for a set of accessories.
5. set of documentation.
Spare parts for the 2-channel analyzer are supplied with primary verification of the manufacturer. Primary verification should be recognized in the Republic of Kazakhstan.
Note: Must be included at the time of delivery.
The product is purchased as part of the additional equipment of the vibration analyzer CSI 2140
Please provide a quotation to the following requirement from importer -
Product Name: Flour
Specifications :
Type: Mocaf Fermented Cassava Flour
Quantity We Need Samples 1st - 1kg (500*2 Pack), And After Analyzing We Take 1 Mt As Initial Order And Afternoon That 1 Container
