80A contact switching capability Only impulse excitation needed, Single or Dual Coil Optional Strong load capacity, 80A/250VAC switchable Low power consumption, small in size This customization includes the addition of brass terminals welded on to the end of the copper leads, integrated shunts and CT's, cage clamps along with screws, standard screw tabs welded onto the end of flexible braided copper cable or custom relay terminals 4KV dielectric strength between coil and contacts RoHS compliant Outline dimensions: (36.6 x 30 x 17.8) mm VDE Certificate No.: 40027144
25A contact switching capability. Contact Form: 1B/1C optional Only impulse excitation needed, Single coil and dual coil optional. Low power consumption, strong load capability. Small in size, PCB type installation. 4KV dielectric strength between coil and contacts. RoHS compliant. Outline dimensions: (38.8 x 28.7 x 15) mm. VDE certificate No.: 40039308.
Electrical parameters Accuracy class 0.02%, 0.05% Power supply AC 220 V±10% or 110 V±10%, 50/60Hz Power consumption
Product Description ADL10-E Single Phase Electric Energy Meter General ADL rail- installation Electricity meters is a new generation electricity meter developed by Acrel Co,.Ltd, resulting from many years experience in designing Electricity meters. LCD display and electricity pulse output function is installed in the power meter; clock, rate period parameters can be set also. Data swap with the super ordination machine via RS485 communication interface greatly facilitate the power automated administration. This power meter has advantages of smaller volume, high precision, good EMC, easy installation etc, meet the related technical requirements of electronic power meter in the IEC62053-21,IEC 62053-22 standard. Technical Parameters Voltage Reference voltage AC 220V Reference frequency 45-65 Hz Consumption
Profile: MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S,COS, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics. EMC and safety standard IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8) IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1) Measured Scope: The meter MPM8000 can be applied in single phase, 3-Ph 3Wire, 3-Ph 4Wire system. It can be applied vastly in the field of secondary measurement in high Voltage, low Voltage system, or transmission of measured data. Measured accuracy Parameters Display Direction Accuracy Voltage 0~9999.9kV Class 0.2 scope:5%~100%V Current 0~9999.9kA Class 0.2 scope: 5%~100%A Zero sequence Current Class 0.5 Power factor -1~+1 Directional Class 1 Frequency 45~65Hz ¡À0.01Hz Active Power -9999~9999MW Directional Class 0.5 Reactive Power -9999~9999MVAr Directional Class 0.5 Apparent Power 0~9999MVA Class 0.5 Active Demand -9999~9999MW Class 1.0 Reactive Demand -9999~9999MVAr Class 1.0 Active Energy 0~9999999.99Mwh Directional Class 1.0 Reactive Energy 0~9999999.99MVArh Directional Class 2.0 Phase Angle 0.0¡ã~359.9¡ã Directional Class 2.0 Current total harmonic % 0~100% Class 2.0 Voltage total harmonic % 0~100% Class 2.0. 1unit/carton, 36 unit/big carton.
1, product name: 3 phase electric meter case 2, material:abs 3, weight:1232.5g(including terminal block) 4, size: 288.8*172*87mm 5, bottom case is made of abs 6, front cover is made of pc 7, lower cover and data window is made of pc 8, terminal block is made of bakelite 9, including the metal parts 1, plastic bag packing 2, carton box size: 60*33*42 cm 3, 26 pcs/carton box
CDY series impulse test systems can be used to generate impulse voltages simulating lightning strokes and switching surges. The stage energy is 2.5 kJ~1620kJ. Max. Charging voltage is 100~7200kV. Applications covered include testing according to IEC, ANSI/IEEE as well as other national standards. The basic system can be upgraded in various ways for special tests and for greater ease of operation. A number of additional circuits and components allow optimizing the impulse test system for tests on different kinds of high voltage test objects. The generator is due to its unique, modular, patented structure perfectly suited for transportation and easy on-site erection. Also the internal inductance is the lowest ever built. We can also provide the professional solutions and equipments for: withstanding voltage testing, c & tan-delta (power factor) testing, partial discharge (PD) testing and impulse voltage testing.
Single phase electronic kwh meter Main features: Active e. C measure mode is optional. Lcd display format is optional. Tamper function(option): 1p2w 1p1w Cover open alarm(option): meter cover or terminal cover Communication port (option): optical port or rs485 Terminal cover: short or long (transparent) One or two rates controlled by external device (option). Ip53 in accordance with iec60529: 198 Sea transportation standard packing
Power supply (AC/DC) AC 85-265V / DC 85-330V or 18-90V DC Power consumption:
GF211 double clamp phase volt-ampere meter is a multi-functional portable instrument. It can measure not only alternating voltage, but also alternating current. Its important function is to measure phase angle between two voltages, between two current or between voltage and current. The current signal is obtained by the clamp current transformer without cutting off current wire. It can discern inductive circuit and capacitive circuit; can directly read differential protection phase among every unit of CT; can check connection of transformer; measure three way voltage phase sequence; can check whether the meter connection is right or not; can evaluate the running speed of electric kWh meter. It has high resolution of current, so can be used as a leakage current meter. It is an ideal choice for electric power bureau, factories, mine, petroleum -chemistry enterprises, metallurgy factories and so on.
Voltage:220V Power:550W Flowrate:60L/min Suction length:5m height:10m Inlet diameter:25mm Outlet diameter:25mm
Material: Polycabonate for the outer clear body abs plastic for the insert part Color According to customers' requirements Application: Meters, warehouse, international freight forwarders, others Wire length 150mm or other as per request Specification: 1.Used with any kind of traditional sealing wire 2.Available colors for the inner locking mechanism Print 1.Laser print 2.Customer's company name&logo, sequential numbers 3.Bar code is available Why choose us? 1.Specializing Our company is specializing in the production of various kinds of security seals: high security bolt seals, cable seals, plastic seals, meter seals, metal strap seals and barrier seals, etc. 2.Variety The company producesvarious kinds of security seals, various types, shapes and sizes of the seals, in order to meet your different needs. 3.Quality controlled the company is considering.Â?�quality first, service first" 4.Favorable price we will provide you favorable and reasonable price! the larger quantity, the more discount. 5.Timely delivery no matter how small or big your order is, timely delivery is our long-term goal! 6.Special customized at the same time, we provide customizing service, if all of our products cannot meet your requests, we also can specially customize the products for you as per your samples, drawings, etc. Our service 1)any inquires will be replied in within 24 hours. 2) samples production and delivery service can be provided. 3) oem/odm is available. 4) all products have been strictly quality test in our factory before packing.
Model Meter seal Seal material: Polycarbonate for the outer clear body; Abs plastic for the insert part. Wire material Galvanized steel wire/copper wire nylon Coated wire/stainless steel wire/mixed with kinds of material Wire length 7*0.68mm or others as per request Color Yellow/red/green/blue/purple etc. Imprinting Laser marking Options Printing logo, name, numbering and bar Code Strength >40n Applications Fire extinguisher pins, atm cassettes, ballot boxes, carts, tote boxes , luggage cases, first-id boxes, storage cabinets, drum, scales, power
The following is the feature of the meter shell: Overall dimensions:281x180x98 Installation dimensions:255 x90.5 1, Bottom case is made of ABS-V0, or ABS-PC(UL94) 2, Upper cover(front cover) is made of PC-V0 3, Lower cover and window is made of PC-V0(UL94) 4, Nameplate is made of 0.5mm Aluminium or PC-V0 or ABS-V0(UL94) 5, Terminal housing is made of bakelite 6, Terminals is made of brass for 1.5-6A,10-40A,20-80A,or on request 7, Signal terminals No. - 2pcs-6pcs are available on request 8, short or long terminal housing cover is available 9, RS232 optical port available on front cover Standard export carton package
We provide you with the best quality of the product at a reasonable prices.
16A contact switching capability Only impulse excitation needed, both for single and double coil. 4KV dielectric strength between coil and contacts. Mounting: PCB THT RoHS compliant. Outline dimensions: (29 x 13 x 17) mm. VDE Certificate No.: 40030447. UL Certificate No.: E340054.
120A contact switching capability Only impulse excitation needed, Single Coil and Dual Coil optional. Low power consumption, small in size. This customization includes the addition of brass terminals welded on to the end of the copper leads, integrated shunts and CT's, cage clamps along with screws, standard screw tabs welded onto the end of flexible braided copper cable or custom relay terminals. 4KV dielectric strength between coil and contacts. RoHS compliant. IEC62055-31 UC3 compliant. Outline dimensions: (42 x 32 x 20.8) mm.
120A three sets of contacts switching capability. Only impulse excitation needed, single coil and dual coil optional. Low power consumption, small in size. This customization includes the addition of brass terminals welded on to the end of the copper leads, integrated shunts and CT's, cage clamps along with screws, standard screw tabs welded onto the end of flexible braided copper cable (Flexwire) or custom relay terminals. 4KV dielectric strength between coil and contacts. RoHS compliant. IEC62055-31 UC3 compliant. Outline dimensions: (103 x 46.5 x 41.7) mm.