(Equipment for Control of Resistance to Expand and Explosion of PET Bottle) For PET bottles - Simulating filling process PBBT-1 PET Bottle Burst Tester is a specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly used. Users can choose the test method basing on their requirement. The PBBT-1 is capable to test the capacity of resilience under certain pressure or the rupture test of the PET bottle. Through the reproduction of the pressurization, the process has been linearized and it increases to the predetermined point or the point of bursting. After selecting the test program, the cycle will start automatically depending on the settings. The touch screen displays the pressure value in real time and record the maximum pressure and burst pressure. Characteristics: • Standard equipment for the PET bottle industry. • 3 international test methods are available • PLC integrated & Touch screen control • Automatic clamping and filling system • Can store 10 operators and 30 products • User defines the product lot number and sequence number • Display curves of pressure and volume expansion during the test • Monitors and records the temperature of the water during the test • Applicable to 2.5 L bottle (consult us for bigger size) • Stainless steel design ensures the durability of tester • RS232C data output: connected to either printer or software • Integrated calibration function Modes details: Fill ramp mode: The filling ramp mode is designed to simulate the situation of filling lines of PET bottles. Under this mode, the PET bottles are pressurized rapidly to the initially preset pressure and maintained for a given time (for example 13 seconds). Then continue to increase the pressure with a speed of 0.1 bar/s until the outbreak of the bottle or reaching the max pressure or volume. Preset parameter includes: initial screening pressure, maximum pressure, and expansion of volume limit. Burst mode: Under this mode, PET bottle will be pressurized rapidly to the initially preset pressure and maintained for a predefined period. Custom mode: Under this mode, user is able to create the pressure curve to meet the particular conditions of control. Users can define the pressure curve by steps, after the adjustment is made, the corresponding curve will be displayed on the user interface.
SPECIFICATIONS Test portTwo 10/100/1000M BASE-T RJ-45 ports; Two 100M/1000M BASE-X SFP optical fiber ports; Support 1 cu port+1 fiber port 2 fiber ports 2 cu ports single fiber port 1 cu port five modes Management portOne WiFi one RJ45 10M Power supplyOne Micro USB Leds indicatePORT1/2 LINK ACT error one yellow Run one green CPU run lighting Power charge one charging is red charged full is green System controlOne on/off button one reset button for configuration reset AC adaptinput 100-240VAC, 50-60HZ output5V, 2A Battery5 hours temperature-10~45 humidity5%~95% Non condensation Dimensions80x160x35mm weight200g featuresClient APP mode RFC2544;throughputlatencyframe loss and back-to-back Bert One port 64 streams Inline filter and capture support terminal mode and through mode L1 L2 L3 loopback test Copper TDR test SFP DDM Switch port locate Ping ARP sweep Trace route Configure file save and load Ftp/Http/DHCP test Test result save and output Buttery management buttery detect and alarm System time set Temperature detect and alarm Langrage English/Chinese System info check product modehardware versionsoftware version
Application Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries. Features 1: Our own patent technology 2: Embedded system control 3: Touch screen operation, easy to operate 4: TFT LCD display, UI flattening design 5: Dual heat jaws, temperature controlled independently 6: Micro-printer prints mini-report 7: Pressure easy to adjust, heat temperature and time touch screen input. 8: Emergency stop button, safety design to prevent burns 9: Over temperature protection, over pressure protection 10: Silence working 11: DB9 RS232 communication port. 12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data. Technical Indexes Heat temperature: Room temperature+6 ~ 300â?? Accuracy: ±0.2 â?? Dell time: 0.1~ 999.9s Pressure: 0.05 MPa~1.1MPa Heat jaw surface: 265mm ? 12 mm (customized) Heat jaws: 2, controlled independently Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide) Gas source interface: Ф6mm Outer dimension: 536 mm (L)?335 mm (W)?413 mm (H) Work noise: 0db Power supply: AC 220V 50Hz Net weight: 33kg Standards QB/T 2358(ZBY 28004)?�ASTM F2029?�YBB 00122003 Configuration Delivery: main unit, micro-printer, footswitch, sample feeding rod. Optional: Communication cable, DSM system -
Application Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries. Features 1: Our own patent technology 2: Embedded system control 3: Touch screen operation, easy to operate 4: TFT LCD display, UI flattening design 5: Dual heat jaws, temperature controlled independently 6: Micro-printer prints mini-report 7: Pressure easy to adjust, heat temperature and time touch screen input. 8: Emergency stop button, safety design to prevent burns 9: Over temperature protection, over pressure protection 10: Silence working 11: DB9 RS232 communication port. 12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data. Technical Indexes Heat temperature: Room temperature+6 ~ 300â?? Accuracy: ±0.2 â?? Dell time: 0.1~ 999.9s Pressure: 0.05 MPa~1.1MPa Heat jaw surface: 265mm Ã? 12 mm (customized) Heat jaws: 2, controlled independently Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide) Gas source interface: Ф6mm Outer dimension: 536 mm (L)Ã?335 mm (W)Ã?413 mm (H) Work noise: 0db Power supply: AC 220V 50Hz Net weight: 33kg Standards QB/T 2358(ZBY 28004)ã?�ASTM F2029ã?�YBB 00122003 Configuration Delivery: main unit, micro-printer, footswitch, sample feeding rod. Optional: Communication cable, DSM system -
Application GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials. Features Standard Gurley, Low Pressure Gurley, High Pressure Gurley Sheffield units, Bendtsen units Interchangeable test heads Output in seconds, other unit optional Embedded system, remote service Touch screen operation Test data and curve real time display Built in data query function Built in micro-printer to print reports Automatic overload protection. Highly accurate sensors to ensure the accuracy and repeatability. Swagelok piping system, to ensure system tightness and long-term stability Advanced control device, reliable operation and long service life Standard communication interface, configurable professional computer software The calibration can be traceable to ensure the measurability of the test data Support DSM system Technical indexes Test Range: 30,60,000 Gurley seconds,Standard, 0.0021,200um/Pa.s,Standard, 300,60,000Gurley seconds,Optional, 0,60,000 Gurley seconds,Optional, Resolution, 0.1 Gurley seconds Sample Amount, 1 ,Standard,,3 can be customized. Differential Pressure,0.01kPa,20kPa,STD,1.22kPa, Accuracy: 0.01kPa Test Area: 1.0in2. ,0.25in2, 0.1in2 optional, Sample Thickness: ,5mm Test Gas: Air, O2, N2, CO2,Self-provide, Gas Resource: 0.3MPa,1.0MPa Interface: Ф6mm Dimension: 320mm,L,�380mm,D,�410mm,H, Power Supply: AC 220V 50Hz Net Wt. 25 kg Standard ISO 5636.5,ASTM D726, TAPPI T460,TAPPI T536,TAPPI T538,TAPPI T490 Configuration Delivery,Mainframe, Test Head (1.0in2), Super Filter, Precision Pressure Regulator. Optional: Sample Auto Feeder, Calibration Equipment,Test Head(1.0in2), Test Head(0.25in2),Test Head(0.1 in2). Note: Specifications are subject to change without prior notice.
This testing machine is according to iec61058.1, iec60884 and iec60669.1 standards to design, it is suitable for household and similar fixed electrical installations switch capacity and normal operating life test. Its aim at checking the switch whether is able to withstand the mechanical damage and electrical fatigue damage in normal use, and if there are adhesion phenomena or prolonged closed or disconnected phenomena occur, inspect whether there are excessive wear and other harmful consequences with it. It is the special equipment for switch mechanical life machine and electrical life endurance tester. Parameters 1.Power supply: ac220v10%/50hz or 110v/60hz 2.Station : stations, 1 and 2 station are used to perform switch test (rocker switches and push button switches can switch test, 3 and 4 station are used to perform the plug and socket testingm, all 4 workstation can work independently ) 3.Operation interface: 7-inch color lcd touch screen 4.Drive mode: pneumatic, 58kg/cm2 5.Control systems: plc control 6.Preset times: 0999999s, can be preset 7.Test times: displays the current number of trials 8.The on time: 099.9s, can be preset 9.The off time: 099.9s, can be preset 10:travel time: mechanical adjustment, take the cylinders maximum stroke position 11.Test rate: adjustable valve, about 0.2s / times 12.Atmospheric pressure : 80106kpa 13.Environment temperature:540 14.Relative humidity : ( 2090)%rh 15.Working place: no violent shaking, vibration, electromagnetic interference, no dust, Non-explosive and corrosive gases, good heat dissipation 16.Dimensions and weight : l*w*h=1180*750*750mm, 105kg
MEWOI3100B+ Clamp Earth Resistance Tester is widely applied in ground resistance measurement, loop resistance measurement in fields such as electric power, telecommunications, meteorology, oil field, architecture and industrial electrical equipment, etc. When measuring ground system with loop, there is no need to disconnect the ground wire without auxiliary electrode, which means safer and faster. MEWOI3100B+ Clamp Earth Resistance Tester can measure the ground fault which can not be measured by traditional method, can apply in the occasion where traditional methods are unworkable; MEWOI3100B+ Clamp Earth Resistance Tester measures the integrated value of ground resistance and resistance lead. Main Features 1Measuring Range0.01-200Ω2Stored Data99 sets3Clamp Size32mm4Power Consumption:Maximum 50mA Model No.: MEWOI3100B+ Name: MEWOI3100B+-0.01Ω-200Ω Earth Resistance Clamp meter/tester
Main Features: 1,Equipotential bonding resistance Test,2,low value resistance test, 3,DC resistance test Model No:MEWOI4700 Name: MEWOI4700 Equipotential&DC low resistance testerMain Function:Test of equipotential bonding resistance between functional metal components, low value resistance test, DC resistance test, resistance test of connecting conductor in ground network ground pole, contact resistance, riveting resistance test, wire length test, etc. Test Wires:2 red and 2 black wires, each 5m
Purpose SYR71 Steel-bar Location and Corrosion Tester, incorporating functions such as test steel-bar diameter, distribution, concrete backing thickness, and corrosion in concrete. Specification 1. Multifunction instrument. Its function includes steel-bar diameter, distribution, concrete backing thickness, and corrosion test. 2. Grid and section scan mode. Instrument can display steel-bar distribution and scan steel-bar without concrete size limited. 3. Automatic measure environmental temperature. Instrument design to contain a measure environmental temperature module, it can measure, record, display environmental temperature quickly no thermometers required. 4. Can save test date. This is convenient for laborer data management 5. Real USB transmission. Data can be transmitted to computer for future process and analysis. 6. Powerful data process and analysis software in windows. Software can display analysis result by spectrum and isoline. Test data can be export to word or Excel easily.
FDT-0931 Automatic acid tester (extraction method) Scope This instrument is mainly used for measuring the acid value of petroleum products such as insulating oil and steam turbines. The instrument integrates optics, electronics, mechanical and electrical, chemical and other high-tech products. It has the characteristics of fast measurement, accuracy, reliability and good repeatability. Features 1, large-screen LCD, English menu prompts, no identification keys; 2. Wrap Cup, automatic detection, automatic storage, automatic print test results; 3, the instrument can detect oil sample of six; 4, innovation introduced the US imports XECOM data processing chip, fast and accurate data processing; 5, the use of import VERDER accurate injection systems, precision control results progress; Technical Parameters 1, supply voltage: ~ 220V ± 10% 50Hz 2, the maximum power consumption:
Features 1: 2 patents and 2 counts of software copyright registration. 2: iso, astm, gb and customized test mode. 3: highly accurate load cell, ac-servo drive. 4: test speed can be set freely in the range. 5: touch screen operation. 6: real color tft lcd display. 7: wide range sample thickness test available. 8: sled mass freely input. 9: micro-printer built-in. 10: overload, limit position protection. 11: low power consumption and silence running.
Scope Standard: astm d189 Carbon residue of petroleum products tester (conradson method) is based on gb / t268 "determination of carbon residue of petroleum products' design and manufacture. Applies to easily partially decomposed at the time of the atmospheric distillation, residual carbon content is relatively less volatile petroleum products by left after evaporation and pyrolysis of petroleum products in order to provide relatively coke tendency indicators. Features 1, the analyzer consists of a gas burner, a crucible, cover flame body and hob, hood and other components. 2, the instrument design is reasonable, easy to operate. 3, the main components made of stainless steel, beautiful and durable. Technical parameters 1, the work: single hole, 2. Working methods: kang type method, a gas burner
Wt2080 led power driver test instrument is the comprehensive test instrument for led drive power which is according to gb/t 24825-2009 and iec 62384:2006. It can measure the following parameters: input characteristics test (ac&dc), output characteristics test (ac&dc), output start characteristics test (dc) and harmonic testing.
VLT-PLC Vacuum Leak Tester (PLC Model) (Air and water tight test box: vacuum test) Tests on: Bottles: Glass or PET and Preforms Caps: Aluminum, other metal, plastic Cans: Aluminum, others Pots: Caps, film, blisters etc. Characteristics & Specifications: • Vacuum adjustable up to - 999 mb. • Box with dimensions upon request. • Box made of polished transparent PMMA (very rugged). • Easy to use and safe by touch screen PLC Control Panel. • Dynamic display: Testing status / Date and time. • Display: Product name / Operator / Batch No. / Sample No. • User defined test cycle (up to 16 modes). Pre-define up to 4 steps of each test. Vacuum level and holding time are adjustable for each step. Satisfy different kinds of testing request. • Easy operation by selecting the pre-defined mode for starting a test. No need to set the parameters each time. • 10 operators and 30 products memory. • Lot No. and Sample No. editable. • Review of the testing curve. • RS232 C output. • Resolution: 0.1 bar. • Accuracy: 0.5% of the measure. • Delivered with high performance vacuum pump. • Quick and easy verification and calibration.
•Dual level LCD display •Automatic temperature compensation •Replaceable pH electrodes The KL-081 is a 2 in 1 tester that measures pH as well as temperature reading in water. This is especially convenient where pH and temperature readings are needed. Now you do not need to buy another thermometer and you also save time between test. The automatic endpoint reading mean that technician will not need to guess the endpoint of a pH reading, thus ensuring accurate records of data all the time.
•Dual level LCD display •Automatic temperature compensation •Replaceable pH electrodes The KL-081 is a 2 in 1 tester that measures pH as well as temperature reading in water. This is especially convenient where pH and temperature readings are needed. Now you do not need to buy another thermometer and you also save time between test. The automatic endpoint reading mean that technician will not need to guess the endpoint of a pH reading, thus ensuring accurate records of data all the time.
Easy-to-read Custom Dual-level LCD •On-the-spot measurement •Automatic Temperature Compensation •Tactile grip casings It uses combined pH electrode of high sensitivity, fast response, and good repetition as probe. With large liquid crystal digits display, the meter is reliable, stable, portable, and convenient to operate, especially for field measuring. It is praised by home and aboard. This product has been exported in batches. It is applicable to determine pH value of water solution in departments of medical treatment, environment protection, scientific research, college, swimming pool and mechanical plant etc.
Scope of application For flash and Fire points of all petroleum products, except fuel oils and those having an open cup flash below 79 C (175F). Benefits - Conforms to ASTM D92 and related specifications - For flash points above 79 C (175F) Function characteristics 1,english operating software prompts; 2, with the experimental date, test time parameter prompts; 3, automatic correction of atmospheric pressure and calculated correction values; 4 differential detection, automatic correction system deviation; 5, scan, ignition, detection, print test data computer is done automatically; 6, electronic ignition, the gas flame, forced air cooling detection of anti-fuel; standard wooden case
Common Rail System Tester CRS-1000 simulates an engine ECU, to drive a solenoid on CR pump, such as Bosch CP1/CP2/CP3, Delphi CRSP and Denso HP2/HP3, and solenoids of 6 CR injectors. A standard high pressure pump test bench with a CR system tester CRS-1000 will fulfill most tasks for repairing a CR system and the components, such as injection quantities, injector fuel return, nozzle injection spray atomization, pump condition and fuel rail pressure control. Design Features Combine two independent modules for pump and injector control Pump driving signal - Adjustable duty cycleíAwhile monitoring fuel rail pressure Injector driving signal - Adjustable frequency and pulse width Modulated driving signal to ensure the safety of the solenoids of the injectors Software based over-pressure protection Short circuit protection for solenoid driving signals Rich accessories, ready to test Bosch, Denso and Delphi injectors and pumps 50*43*30cm
PH-903 Pen pH Tester WR PH-903 Pen pH Tester WR (New) Range: 0.00-f-¼14.00 pH, Resolution: 0.01 pH, Accuracy: -f+ú-f+¦0.03pH, Temp. C: 5-f-¼50-f+¬, (ATC) Calibration: Two-point at 6.86pH and 4.01pH (or 7.0pH and 4.01pH) Features: Automatic switch-off function: After 10 minutes without pushing buttons, the meter will be switched off automatically. Low battery: As long as there is any display, the accuracy is guaranteed. Battery Life: DC 4x 1.5V Flug: Fixed electrode 0