China CNC Vertical Lathe: Vertical Lathe Factory In China 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years. 3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one. 4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it) 5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported) 6.The electrics adopt Japan O mron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability. 7.ELectric rotary valve, Grade 16 machinery variable speed make the device convenient, smart and reliable. 8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation. 9.JB/T4116-96 precision test standard of vertical lathe is performed JB/3665-96 technical condition of vertical lathe is performed. 10.Advanced and perfect processing and assembly process forge excellent quality. 11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted. 12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc. More CNC Vertical Lathe:
1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years. 3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one. 4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it) 5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported) 6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) a ssembly process, in addition, the electrics of the whole machine owns super-high reliability. 7.ELectric rotary valve, Grade 16 machinery variable speed make the device convenient, smart and reliable. 8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation. 9.JB/T4116-96 precision test standard of vertical lathe is performed JB/3665-96 technical condition of vertical lathe is performed. 10.Advanced and perfect processing and assembly process forge excellent quality. 11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted. 12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc.
China Vertical Lathe: 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years. 3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one. 4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it) 5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported) 6.The electrics adopt Japan Omron P LC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability. 7.ELectric rotary valve, Grade 16 machinery variable speed make the device convenient, smart and reliable. 8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation. 9.JB/T4116-96 precision test standard of vertical lathe is performed JB/3665-96 technical condition of vertical lathe is performed. 10.Advanced and perfect processing and assembly process forge excellent quality. 11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted. 12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc. More Vertical Lathe:
CNC Double Column Vertical Lathe: 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC�?�50) while the sliding surface of guide is treated with sticking plastic (including inclined veneers and pressure plate). The precision of the product can be maintained for a long time and the cycle for big repair can be extended as long as more than 10 years. 3.EXcellent casting comes from the same factory that the domestic big factories utilize (all are in type of HT300) and the artificial heat ageing is carried out. The casting can never be carried out with weight-reducing treatment, the weight of the whole machine accords with the standard one. 4.five-angle tool carrier adopts high-precision rat gear for positioning and for all 120 pieces, super-strong stiffness. (the traditional five piece positioning plate can be compared with it) 5. 2 axial digital display is taken as the standard confirmation (4 axial digital display type will be exported) 6.The electrics adopt Japan Omron PLC control and the electric components utilize the components with ultra-high quality , specification (CE standard) assembly process, in addition, the electrics of the whole machine owns super-high reliability. 7.ELectric rotary valve, Gra de 16 machinery variable speed make the device convenient, smart and reliable. 8.High-precision gear grinding gear and gear grinding spiral bevel (Grade 6 precision) are featured with low noise and stable operation. 9.JB/T4116-96 precision test standard of vertical lathe is performed JB/3665-96 technical condition of vertical lathe is performed. 10.Advanced and perfect processing and assembly process forge excellent quality. 11.Accessory configuration is complete and only the user prepares for the knife and measuring tool, the operation can be started immediately. Perfect after-sales service (pre-sales, in-sales, after-sales, installation, debugging, training and maintenance etc.) in addition, one-year quality assurance service is granted. 12.Optional configuration: rolling working platform, Germany Mecano button station, heightening lathe and prolonging ram and square ram etc. More CNC Double Column Vertical Lathe: China Vertical Lathe.
Model:S256 Name: Cellular 5-CH DC Electric Measuring RTU The Cellular (GSM/GPRS/3G/4G/NB-IoT) DC Electric Measuring RTU is special designed for remote monitoring 5- channel DC electricity power. Measure each channel voltage, current, active power, active energy. When overload or exceed the pre-set value, then it will alert by SMS, Voice call, Cloud, APP, Wechat, Web Server, SCADA, HMI, DSC immediately. The Cellular DC Electric Measuring RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, integrated special measurement chip and inbuilt industrial Cellular module. It provides 4 digital inputs, 2 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity. Main Features: 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM® Cortex�-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog; 6. Wide range power supply 12~36VDC with over voltage and phase-reversal protection; 7. Measurement range: voltage: 60V, 100V, 260V, 450V, 500V, current 5A, 20A, 50A. 8. Supports 5-Channel DC power: current, voltage, active power, active energy; 9. 4 digital inputs, compatibles dry and wet contact; 10. 2 relay output (5A/30VDC, 5A/250VAC), compatibles pulse outputs; 11. 1 ambient sensor input for monitoring onsite temperature and humidity; 12. Supports phase loss, phase recovery, voltage overload, current overload detection and alarm; 13. Inbuilt inter-lock logic programmer and powerful timer program function; 14. Resend the data while communication failure and alert to users by SMS; 15. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications. 16. Supports Modbus TCP protocol, can integrate to SCADA, HMI, DSC directly. 17. Integrated 1 Industrial 10/100M adaptive Ethernet module inside, supports Modbus TCP; 18. Supports SMS Alert when overload, I/O triggered or recovery, and external power lost or recovery; 19. Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 20. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message.
NOB CISCO3925E/K9 CISCO3925E ROUTER-------2400Euro MARK LEVINSON 533H USED------5000Euro MANLEY VOXBOX PREAMP/VOICE PROCESSOR----1800Euro DOLBY CP-750 Stereo Digital Cinema Processor--1400Euro Dolby Lake LP4D12 Processor DLP-----1700Euro LAB GRUPPEN PLM20000 DSP AMPLIFIER - USED----5000Euro Lab Gruppen PLM 10000Q SP-----3500Euro Lab Gruppen PLM 14000-----4000Euro Ampeg B15 Heritage Series Bass Combo Amplifier HB-15-----1600Euro BSS OMNIDRIVE COMPACT PLUS FDS-366T-----1200Euro L ACOUSTICS LA48/LAB GRUPPEN FP6400---1000Euro Lab Gruppen FP2600 with only 3 hours of use----700Euro KLARK TEKNIK DN9848 LOUDSPEAKER PROCESSOR----1500Euro DBX 160SL Blue Precision Stereo Compressor/Limiter---1500Euro Eventide H-3000-se Studio Ultra Harmonizer Effects Processor---Euro500 Hhb Cdr-850 Cd Recorder ---400Euro Empirical Labs EL8X-S Distressor Stereo Pair---1200Euro Tc Electronic Finalizer 96k Studio Mastering Processor---700Euro Drawmer 1961 Vacuum Tube Equaliser---Euro1000 Bss Audio Fds-334T Minidrive Loudspeaker---300Euro Bss Audio Fds-366t Omnidrive Compact -----1300Euro BSS FCS-960 Dual Channel/Mode Graphic EQ--700Euro Dolby Lake Contour Dsp 2 X 6 Speaker Processor--700Euro Lab Gruppen Plm20000Q/Bp Plm 20000Q Powered Loudspeaker Management ---4000Euro Lab Gruppen PLM 10000Q/SP Powered Loudspeaker Management System---3500Euro Xta Dp 226 - Dolby Lake Contour Dsp 2 X 6 Dsp With Aes Ebu Digital---600Euro Lab Gruppen PLM 14000-----4000Euro Lab Gruppen Plm14000/Bp 2X22550W 8 Ohm Binding Post Power Amplifier----3800Euro DBX DriveRack 4820 4X8 Loudspeaker Management System---1200Euro DBX DriveRack 4820TI 4X8 Loudspeaker Management System----1900Euro DBX DriveRack 4820TIO - Complete Equalization and Loudspeaker Ma---2500Euro dbx 4820TO DriveRack Loudspeaker ------2000Euro dbx 4820 4800 w/ blank front panel DriveRack---850Euro SE Electronics SE Munro Egg 150 Monitoring System-----950Euro Audio Technica M3 Wireless in Ear Monitor System AT-M3--300Euro Shure PSM 1000 | Personal Monitor System, Dual Receiver P10TR---1500Euro Sennheiser EW 300 IEM G3 Wireless In Ear Monitor System 566-608 MHz---400Euro Shure P9TRA Wireless In-Ear Monitor System----600Euro Sennheiser EW 300 IEM G3 Wireless In Ear Monitor System 566-608 MHz----300Euro
4 dimensional moment Maxtor PS2KVM automatic multi computer switch 1, to support the engine plug 2, automatic 4 port PS/2 KVM switch, button, support hotkey switch, cut the change, with LED indicator light, buzzer indicator 3, support hotkey switch button is cut namely change MT-471S is to use 1 sets of keyboard, mouse, monitor control 4 computers You can scan and monitor the computer in every job. 4, Ni Jin Nickel gold VGA interface Compatible with strong stability Through a variety of product testing, compatibility, support a variety of widescreen display Computer connection port USB and VGA separate line 5, engineering plastic door minimalist design Confidence in the quality of the election Engineering plastic shell, better performance, higher strength, effective protection of the body and Anti static interference, to ensure the stability of the signal conversion The design of a simple and low-key blue generous, the body of each One inch is just right, the quality of the cause, the confidence of the election. MT-471S is to use 1 sets of keyboard, mouse, monitor control 4 computers You can scan and monitor the computer in each job. The software installed, the key switch, engine support plug, suitable With the securities market, education and other industries. Independent transmission High isolation The transmission is stable, no interference products without power supply, the transmission of the independent, high isolation 6 dimensional moment converter PK converter common Maxtor American import chip The United States imports of high dimensional Maituo moment performance of ordinary digital conversion chip, ordinary rotary screen Digital conversion chip, intelligent conversion HD Converter will ghosting and trailing screen The perfect show on the market recently swept the resolution of some products require external power supply, easy to Converter distortion, heavy shadow and operation without power supply will be very easy to appear The unstable factors of tailing! Snow point 7, the scope of use This product can be used VGA and other PC/NVR interface output to the VGA TV / projector and other LCD/ interface equipment, plug and play, easy to use! 8, exquisite packaging simple and generous Rugged but not out of the beautiful outer packing so that both the transportation process or the date Often used in the process of worry free.
Model NO: BL-SHL05-10A Solar panel:5W solar panel with 6 meters cable Lamp:2pcs 3W 3.7V AMD LED super brightness Battery:3.7V 4400mAH lithium battery, high security, no risk of explosion USB: Mini USB2.0 5V output interface to charge mobile phones and other digital equipments. On each lamp Charging time: about 8 hours Switch control on each lamp with 3steps light intensity, first step-1W lighting, second step-2W lighting, third step-3W lighting Lighting time: A: 3 W with 240LM lamp about 6 hours B: 2 W with 160LM lamp about9hours C: 1 W with 80LM lamp about 18hours Standard Accessories 1pcs 8in 1Universal USB charge cable, 2pcs Hanging slings Optional: AC charger Protection: Over charging, Over discharging. Built-in Short Circuit protection Indicator Power enough: light is always on mode No power: Light will be off, need to recharge it by panel When charging: light is red When full charged: light will turn green. Model NO:BL-SHL05-10A Solar panel: 10W solar panel with 6 meters cable Lamp: 4pcs 3W 3.7V SMD LED super brightness Battery: 3.7V 4400mAH lithium battery, high security, no risk of explosion USB: Mini USB2.0 5V output interface to charge mobile phones and other digital equipments. On each lamp Charging time: about 8 hours Switch control on each lamp with 3steps light intensity, first step-1W lighting, second step-2W lighting, third step-3W lighting Lighting time: A: 3W with 240LM lamp about 6 hours B: 2W with 160LM lamp about9hours C: 1W with 80LM lamp about 18hours Standard Accessories 1pcs 8in 1 Universal USB charge cable, 2pcs Hanging slings Optional: AC charger Protection: Over charging, Over discharging. Built-in Short Circuit protection Indicator Power enough: light is always on mode No power: Light will be off, need to recharge it by panel When charging: light is red When full charged: light will turn green.
1. Cold aggregate supply system Modularized design which is convenient for transportation. Frequency conversion timing with credible capability. 2. Tilted belt feeding system Automatically flow middle filter with no vibration will avoid the material of oversize entering the drying drum. Protect hot aggregate elevator and the vibrating screen from any jam. 3. Drying drum The drying drum is covered by heat preservation material, and blades inside for lifting aggregate. And it is driven by four friction wheels which is smooth and even and can meet freely link. 4. Burning system The burner is equipped with gas ignition device. Burning system uses automatic temperature-control function. Diesel (heavy oil), coal and gas can be the fuel. 5. Hot aggregate elevator Double rows of chains with double bowels, special structure for outlet will reduce the abrasion and noises. 6. Dust collecting system Use America Nomex punched felt against water and oil. Automatically removing the dust. Cleaning the cloth sack with pulse back blowing. 7. Filler supply system the outlet of screw conveyor installs butterfly valve to control wallop. Filler temporarily storage silo using high-press air to explode the agglomeration. 8. Pneumatic control system Pneumatic system uses Germany Festo air cylinder and electromagnetic valve. 9. Asphalt supply system Asphalt tubes using heat transmitting oil for heat preservation, the hot oil stove use diesel as fuel. 10. Electric control system Copy container structure, the walls, door and windows are made of colorized steel plate. Box type control cabinet, main electric parts are global famous brand such as Simens, Schneider, Abb,etc. which has interlock and two-grade protection. The big monitor adopts reasonable voltage-reducing start, urgent manual operation device, digital indicator for filler balance, aggregate balance and asphalt balance, cold aggregate digital transducer, temperature indicator and flow indicator for main components. Colorized touch screen and PLC controller introduced Japan Omolon brand, can meet automatically, semi-automatically, manually control and languages switching on line. Inside control room will reserve a joint position for printer, asphalt weighing will take two steps and detect asphalt & aggregate ratio real-time for each batch.
Features Core to core alignment by pas technology ( pas:profile alignment system) Digital fusion splicer with automatic focus function Fiber core can be display clearly Single x or y view and x & y view simultaneously Auto detect cleaved endface fault Display fiber cleaved and offset angle Display core and clad offset 5.6 inch tft color lcd monitor with clear digital image display  Usb & vga interface Software upgrade via usb interface Specifications Model Kl-300t Applicable fibersSm(itu-t g.652), mm(itu-t g.651), ds(itu-t g.653), nzds(itu-t g.655) Fiber cleaved length8~16mm(coating diameter: 250µm)    16mm(coating diameter: 250 ~ 1000µm) Fiber diameterCladding diameter:80 ~150µm  coating diameter:100~ 1000¦ìm Fiber countSingle Fiber aligning methodCore or clad aligning Image processing methodDigital Actual average splice loss0.02db(sm),  0.01db(mm), 0.04db(ds),  0.04db(nzds) Splicing timeTypical 9 sec, with standard sm fiber Splicing mode53(templet), 40(user) Splice loss estimateMore accurate Return loss>60db Storage of splice result4000 results, 20 parameter per result Fiber display and magnification300x(x or y view), 150x(x and y view) Tube heating timeTypical 30 sec Tube heating mode9(templet), 24(user) Tube heating temperatureCan be adjusted Applicable protection sleeve length60mm, 40mm and a series of micro sleeves Tension test2n Electrode life2500 No.Of splice/heating with batteryTypical 150 cycles (splice/tube heat) with inner li-battery Display screen5.6 tft inch color lcd monitor Image change overThe fiber image is turned upside down TerminalsUsb 1.1 and vga Operating condition0 ~ 5000m above sea level,  0 ~ 95%rh and -10¡«50¡æ,  respectively,  max. Wind velocity of 15m/s Power supplyAc 100-240v with ac adapter inner li-battery(6600mah) Dimensions150mm(l) x150mm (w) x150mm (h) Weight2.7 kg excluding battery, 3.2 kg including battery.
GZ-0702 audiometer is a computer control hearing test equipment that combine by several functional modules. It¡¡¥s a Microcomputer hearing evaluation tool which develop base on hearing test and the Acoustic requirements of hearing-aid fitting. GZ-0702 audiometer use for pure tone test,be suitable for hospital ENT diagnose and hearing-aid fitting,or clinical/family and outer ambulant hearing test. Test could proceed by TDH39 air conduction.test signal including pure tone,pluse voice and warble tone. GZ-0702 audiometer provide 11 air conduction test frequency point, frequency range from 125Hz to 8KHz,dB HL from 0 to 110. GZ-0702 audiometer also provide 11 bone conduction test frequency point, frequency range from 125Hz to 8KHz,dB HL from 0 to 70(the standard is from 250Hz to 6000Hz). All of the test data result could be automatic switch to pure tone audiogram and calculate patient¡¡¥s PTA value automatically. All of the test data result could be automatic switch to pure tone audiogram and calculate patient¡¡¥s PTA value automatically. The structure of audiometer make it convenient for service,and autotest make it easy to debugging and annual calibration. PC computer interface: USB Operating system: WindowXP Driver:WindowXP own Technical parameters Output:Air conduction/bone conduction Masking; NB/WN/SN/PN Maximun HL air conduction/bone conductin: 110DB/70DB Test frequency: 0.125 Noise/square wave Attenuation step length: IdB+5dB External Printer :Please purchase by yourself Sound field calibration: Internal/ external voice/ tone Earphone:Medical headset Monitor : Internal/ external Structure:Metal case Size : W.D.H20*14.5*3.5cm Weight (including TDH39 Air conduction earphone and power source):2Kg Outer packing : Aluminic box Pure tone digital audiometer GZ0702 Advantage:1. Elegant appearance,must connect computer,can rewrite name of organization,name of client and consultant,contact way. 2.Generate audiogram and automatic generate PTA 3.Can save client information on the computer. 4. High-performance, portable, small and exquisite, Hardware combined with computer software, achieve digitalize hearing test.
General AFV-5G is a handhold transit-time ultrasonic flow meter with clamp-on transducers for non-invasive liquid measurement. Our microprocessor based, user-friendly and field programmable flow measurement technique allows no interruption of the process flow and has low installation costs. Features 1.4-line LCD display with flow mate; totalized and signal condition 2.The flow meter is designed for high accuracy of +/-1.0% 3.Small size (200*92*32mm); light weight ( 538 g ) 4.Wide range; velocities ( 0.01-+/-32 m/s) 5.Ni-MH battery life for up to 10 hours continuous operation. 6.Transducers for pipe sizes of 13 to 6000 mm 7.Transducers include the magnet devise which can install on metal pipe without mounting belt 8.Date logger which records flow mate, date, total flow, signal condition, etc. 9.Response Time: less than 1 second Specification ¡ôMeasuring Principle: Transit time difference ¡ôPipe size: SS Type: 15 mm~100mm (1/2" ~4" ) M Type: 50mm ~ 700 mm (2"~28") L Type: 300 mm~600mm (12"~240") ¡ôResolution: 0.0001 m/s ¡ôPipe Material: Cast Iron, Stainless steel, Ductile Iron, Copper, PVC, Aluminum, Asbestos Fiberglass ¡ôKeypad: 18 keys with tactile action ¡ôResponse Time : Less than 1 second ¡ôAmbient Temperature: -20~+50 ¡æ ¡ôAmbient Humidity: 90% RH or less ¡ôBuilt in Battery: Ni-MH battery ¡ôOperation Time: >10 Hours ¡ôLiner Material: Tar Epoxy, Rubber, Mortar, Polypropylene, Polystyrol, Polystyrene, Polyester, Ebonite, Polyethylene, Teflon, etc. ¡ôDisplay: 4 Line LCD with illumination ¡ôFlow Mate: 5 digits with decimal point ¡ôTotalize: 8 digit, Forward, Reverse & Net values ¡ôEngineer Unit: M3, Liter, US Gallon, Imperial Gallon, Million Gallon, Cubic Feet, US Barrels, Imperial Barrels, Oil Barrel ¡ôTime Unit: Second, Minute, Hour, Day ¡ôOther: Velocity, Date, Time, Signal Condition ¡ôAccuracy: +/-1% ~+/-2% of reading (0.5~30 m/s) +/-0.5% of reading (online calibration) ¡ôRepeatability: +/-0.2% of reading ¡ôCharger: 90~260Vac 50/60 Hz, 8-12 Hr charging ¡ôData Storage: Operation parameters and totalization data are stored by EEPRPM for more than 10 years ¡ôData Logger: 64 data include flow mate, totalizer, time, date ¡ôAlarm: High/ Low with buzzer ¡ôPower consumption: Less than 2 W ¡ôDimension: 200*92*32 ¡ôWeight: 0.54 KG ¡ôEnclosure: Converter: IP65 Sensor: IP68 (Submersible)
* Variable dot printing technology * 180x8 nozzles in one printhead, one head integrate 4 colors printing. * Automatic cleaning and capping system. * Mature constant pressure ink supply system. * LCD screen digital heaters control. * Stress media feeding. * Wavy & Feather printing mode. Adopt variable dot printing technology. Totally 8 columns of nozzled are contained in the printhead, each column contains 180 nozzles. Just one printhead is already sufficient for 4 colors printing. Therefore, it ensures perfecting printing quality by avoiding physical alignment between different printheads. Self-developed automatic cleaning and capping system which makes the operation and maintenance convernient. Inherited from TAIMES large format printers, the mature constant pressure ink supply system is clean and reliable. Composition of all options: Tri-heater System, Platform Vacuum Fans, Media Dryer Fans. The LCD screen digital heaters control, allows easy operation. Stress applied to the media feeding structure so as to match various inkjet printing media perfectly. Item Specification: TAIMES 180E Printhead: 180 x 8 piezo nozzles, variable dots Maximum Print Width : 1800mm (70.8 inch) Maximum Media Width: 1860mm (73.2 inch) Precision: 360, 720Dpi; 360, 1080Dpi; 360, 1440Dpi;360, 2880Dpi; 720, 720Dpi; 720, 1080Dpi; 720, 1440Dpi; 720, 2880Dpi; Print Speed: High speed: 13.8 sqm/hr (360, 1440Dpi,4pass); Standard: 10.6 sqm/hr (720, 1080Dpi,6pass); High Quality: 6.2 sqm/hr (720, 1440Dpi,8pass); Ink: Type: Eco Solvent Ink Color: Cyan, Magenta, Yellow, Black Capacity: 1000ml Per Main Tank of Each color Ink Supply System: Low Ink Detector, Auto Ink Supply System Media: Types: Glossy Photo Paper, PP, Polyester Film, Inkjet Canvas, etc Feeding: Roll Media or Sheet Media Auto Media Feeding & Take-up System: Auto Media Feeding (Equipped) Automatic Cleaning System Printhead Cleaning System: Automatic Dry-preventing System Pre-heater & Dry System: Adjustable Post-heating. Clamp: Equipped Print Interface: USB2.0 Printhead Height: 1 to 3mm Above Media Adjustable RIP Software: MainTop 5 Input Power: 100,240V, 50Hz/60Hz. Machine Dimension: L2830mm , W740mm, H1280mm Package Dimension: L3020mm , W740mm, H970mm weight: Net Weight: 220 Kg Gross Weight: 300 Kg.
Product synopsis Model:SRT-6210 1.Features: This instrument is compatible with four standards of site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD. * Multiple parameter measurement: Ra, Rz, Rq, Rt * Highly sophisticated inductance sensor * Four wave filtering methods : RC, PC-RC, GAUSS and D-P * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the software for RS232C interface. *Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation. *The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC. *Metric /Imperial Conversion 2.Specifications Display 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz, Rq, Rt Measuring Range Ra, Rq: 0.005-16.00um/0.020-629.9uinch Rz,Rt: 0.020-160.0um/0.078-6299uinch Accuracy: +10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 5um Material of Probe Pin: Diamond Dynamo-measurement of Probe: 4mN(0.4gf) Probe Angle: 90p Vertical Radius of Guiding Head: 48mm Maximum driving stroke: 17.5mm/0.7inch Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional Evaluation length: 5l Driving speed: Sampling length = 0.25mm Vt=0.135mm/s Sampling length = 0.8mm Vt=0.5mm/s Sampling length = 2.5mm Vt=1mm/s Returning Vt=1mm/s Profile digital filter Filtered Profile: RC Filtered Profile: PC-RC Filtered Profile: Gauss Non-Filtered Profile: D-P Resolution : .001m if reading ú+10m 0.01m if 10m_readingú+100m 0.1m if reading 100m Evaluation length : 5 cut-off Power Li-ion battery: rechargeable Operating conditions: Temp. 0~50µ Humidity
Overview: The RT6103-S Single Phase Energy Meter Test Instrument (Split Type) adopts internationally advanced new-generation digital power source technologt, integrates all the technological advantages of both domestic and foreign watt-hour meter calibration software, and is introduced to global market by Rowwin Test in a powerful and sensational way. The single phase energy meter test instrument comprises of PWM power source, standard digital energy meter,error processor and PC processing software, this energy meter test instrument can test 3 to 60 various watt-hour meters of Grade 0.5 or lower simultaneously, also is an ideal new-generation multi-position energy meter testing instrument. Technical Parameters: 1. Accuracy class: 0.1/0.05. 2. Reference standard energy meter£ºSingle phase wide-measurement range standard energy meter.(Accuracy class:0.1/0.05). Multi-path voltage transformer: Accuracy class:0.01; Rated load per path:10VA. 3. Voltage range:220v(240V option),Output range:0~125%,Resolution:0.01%full range. 4. Current measurement range:0.1~100A(200A option),Output range:0~120%,Resolution:0.0001A(minimum) 5. Phase angle:0~360¡ã,Resolution of phase angle setting:0.01¡ã. 6. Frequency:45Hz~65Hz,Resolution:0.01Hz. 7. Output waveform distortion:Both voltage and current
The SENTIENT software combined with the MACH3D dashboard from Orange Business Services is a powerful middleware solution bridges the digital divide between traditional security systems application with the latest in digital technologies. The ergonomically design MACH3D offers unrivaled levels of system performance and reliability which is easy to configure, use and manage. Intuitive Touchscreen Technology Employing state of the art visual technologies, the MACH3D is an intelligent interactive multicolour matrix touchscreen system that interfaces to various security sub-systems over high level interfaces or I/O relay contacts. Multiple System Monitoring Electronic Security Professionals are not Information Security Professionals. Very often, a complicated PC monitor screen using the latest CCTV, Alarm Handling or Lighting control system is very confusing to traditional electronic security professionals who are used to hard wired analog interfaces. The MACH3D enables security control room operators to monitor multiple systems over a single touchscreen. Flexible The MACH3D offers a flexible integration to security and communication sub-systems including intercom, CCTV system, alarm handling , access control, paging, security lighting, car parking and door locking systems. Fast. Secured. User Friendly The MACH3D dashboard is designed to give total support offering total reliability in a tough and fast changing environment. Communication and Control technologies and services that simplify control room tasks and remove complexities to give security control room personnel the split second advantage. Enterprise Wide Flexibility The SENTIENT system offers complete freedom as far as physical layout of the system is concerned. The SENTIENT platform can be located virtually anywhere in the building or campus. Connection to a single MACH3D dashboard is via one network cable. Fully Reliable The SENTIENT system offers high availability with redundant CPU and non-blocking capacity thanks to a distributed architecture based on FDDI solutions. A duplicated bus offering high availability leads to a truly resilient switching architecture. Design : meeting needs With our technical expertise we are able to assist and provide ideas during your design stage to identify the best technological solution for current and future needs. We are also able to look at integration options, and appraising how users will work with the system in the security control management environment.
Fusion splicer pt-630 Features Fiber core can be display clearly Singlex or y view and x & y view simultaneously Auto check quality of cleaved end face Auto select best splicing program 9 seconds splice time and 30 seconds heat time Small bulk and light weigh 5 inch color lcd monitor with clear digital image display Simple operation menu Software upgrade via usb interface Specification Model Pt-630 Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655) Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬ 16mmú¿coating diameter: 250 ~ 1000ª8mú¬ Fiber diameter Cladding diameterú¦80 ~150ª8m Coating diameterú¦100~ 1000ª8m Fiber count Single Fiber aligning method Core aligning Image processing method Digital Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm), 0.04db (ds), 0.04db( nzds) Splicing time Typical 9 secú¼with standard sm fiber Splicing mode 53(templet), 40(user) Splice loss estimate More accurate Return loss ú+60db Storage of splice result 5000 resultsú¼3 parameter per result Fiber display and magnification 400xú¿x or y viewú¬, 200xú¿x and y viewú¬ Tube heating time Typical 30 sec Tube heating mode 9(templet), 24(user) Tube heating temperature Can be adjusted Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves Tension test 2n Electrode life 2500 No.Of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner li-battery Display screen 5 inch color lcd monitor Image change over The fiber image is turned upside down Terminals Rs 232 Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah) Dimensions 150mm(l) x150mm (w) x150mm (h) Weight 2.7 kg excluding battery, 3.2 kg including battery
Up-Tech's classics UP-TECH S2410/P270 DVP teaching & scientific research system is the latest work of UP-TECH in 2008! It is the crystal of cordial feedback from the old and new clients across China and embodied Up-Tech's teaching experience of product development for years. It is compatible with the core CPU of Intel PXA270 and the all functions of the core CPU of S3C2410 from SamSung,, consideration overall development tendency of ARM platform, perfectly covers the full function of the series of ARM9 and Xscale from UP-TECH, becoming more elaborated and practical. Up-Tech's classics UP-TECH S2410/P270 DVP teaching & scientific research system is the result of the UP-TECH's experiences of embedded teaching product development for couple of years and it is so-called UP-TECH Classic Platform! Classic 2410 core board: * SAMSUNG S3C2410 CPU based on ARM 920T kernel,; the system works steadily with 202MHZ, MMU, AMBA available * 64MB SDRAM * 64MB N and Flash (larger capacity is optional) * One LED controlled by IO control * 2MB Nor Flash (optional) Classic 270 core board: * Intel PXA270 processor based on Xscale technology * 64MB SDRAM * the system stably works under the main frequency of 520MHZ * 64MB N and Flash * the internal integrates iwmmx instruction * 16MB Nor Flash Classic platform main board source: * 8+=640*480TFT real-color LCD * 8-channel 10-bit AD transfer * Touch screen * PS2 mouse keyboard connector ( MEGA8 extend) * IDE connector * 17-key digital keyboard ( MEGA8 extended) * four host USBs, ONE device USB * 2-bit LED digital tube * One 100M network card, with reserved other one 100M network * real-time clock * Two RS232 standard serials * IC card connector * One RS485 connector * CAN BUS connector * SD/MMC connector * 32-bit BUS and 168Pin extended connector of reusable source * CF card connector ( PC Card mode) * on-board UP-LINK JTAG debugger, with 20Pin standard emulator connector * AD transfer * VGA connector and video signal output * DA connector * DC electronic module( loop-locked test function) * IIC connector * two pieces of IIC memory * SPI connector * PWM DA output * IIS audio CODEC / AC97 audio CODEC * 8*8 matrix LED display module(CPLD drive) * stereo earphone, line, MIC connector * One keystoke producing interruption * Infrared communication IrDA * Three LEDs controlled by IO
Fme(fiber optic modem) Detailed selling lead description Fme is high-speed fiber optic modem with remote configuration based on asic circuitry technology. It supports user-selectable rates between n*64kbps (n=1--31) and 2048 kbps. The fiber interface is sc (single module).Transmission distance is up to 60km. The product fully conforms to part 15 of fcc regulation. With remote configuration, the fme rate of user terminal follows the configuration of the fme of master terminal automatically without any other setup. Data interface of fme can be v.35/v.24/rs232 or g.703. E1 rate supports framed mode and unframed mode, which are known as n*64 kbps (n=1--31) and transparent 2048 kbps. External clock, internal clock, and slave clock are supported. With the function of integrated diagnosis, it can perform tests of local analog loop back and remote digital loop back to achieve end-to-end integrity test. Detailed product description Feature: 1) fiber optic modes: 8.3/125mum, 8.7/125mum, 9/125mum, 10/125mum, single module 2) transmission distance: 0-60km 3) fiber optic interface: sc 4) length of working wave: options: 1, 310nm, 1, 550nm 5) transmitting electrical level: 0~6dbm 6) receiving sensitivity: -36dbm 7) decaying: 1, 310nm window0.4db/km, 1, 550nm window 0.25db/km 8) data interface: v.35 mode: fmve, g.703 mode: fmge 9) data rate: n*64kbps (n=1 - 31); 2, 048kbps 10) transmission mode: synchronous 11) line interface: bnc; rj45 12) transmission features: conforms to g.703 13) clock: line clock, external clock, internal clock 14) test methods: local analog loop back test and remote digital loop back test 15) dce interface v.35 or v.24/rs232c 1) power supply: 220vacf+10%, 50hz; 48vdc(optional) 2) power consumption: 5w; 3) dimension (l x w x h): 225 x 145x 40mm, 9" x 5.8" x 1.6" 4) temperature: 0 - 40fpc 5) humidity: 0~95%
Electronic weight indicator kit Compact and rugged instrument designed for any type of weight, force measurement application, to operate under any type of conditions. It is very simple to use and operate and is very user friendly. It is ideal for tabletop scales, weigh platforms, crane scales, conversion kits, weigh bridges, milk weigh bowls, tank-weighing systems, check weighers, packaging machines, bagging machines Apart from weighing related applications, it can also be used for force measurement applications such as in universal testing machines, spring testing machines, dynamometers, presses (mechanical, hydraulic or pneumatic) Its prominent features are - + Full software calibration + Provision for extra display + Provision for battery back-up + Provision for various options such as rs232 / rs485 output, printer output, two set points + Options of Class 2, 3, 4 or dual range General technical specifications: -Load cell excitation: ¦ 5V DC -Load cell drive capacity: 1 no. 350 W load cells (6 nos. optional) -Load cell connection: 4 wire or 6 wire -Input signal range: 0 to 30 mV -Sampling rate: 4 per second -Internal resolution: 40,000 counts -Display resolution: 1,000 to 15,000 counts -Accuracy class: Acc. To IS:9281 Class II, III, IV or dual range -Non- linearity: +/- 0.05 % of F.S. -Zero temperature co-efficient: +/- 0.01% RO/¦C/h -Span temperature co-efficient: +/- 0.01% RO/¦C/h -Drift of no-load output with temperature: +/- 0.05% -Drift of no-load output after 1 hour: +/- 0.15% -Drift of full scale output after 1 hour: +/- 0.01% Calibration: Full digital software calibration through keyboard (also possible through PC keyboard with MODbus protocol) Weight display: 5 digit 7 segment LED 12.7mm with negative sign Indications: Tare, Gross & Set points, through LEDs Keys: Micro keys (sealed membrane keyboard optional) Operating temperature range: 0 ¦C to +50 ¦C Storage temperature range: -10 ¦C to +70 ¦ C Operating voltage: 230 VAC +10%, 50 Hz (Optional - 110V AC, 12 VDC)