Non-contact Infrared Thermometer Digital Clinical Thermometer with CE & FDA Features: 1. Fast temperature measurement: measurement time 3 million times. 9. Large-screen display: Large-screen LCD display, white backlight, can clearly display the measured value under any light. 10. Modification of settings: You can modify the setting parameters to adapt to the medical temperature measurement system in different countries (for people with different skin colors) 11. Infrared measurement: It only measures the infrared radiation signal emitted by the human body, and does not touch the human skin, which is harmless to the human body.
The SIM7000C is Multi-Band LTE-TDD/LTE-FDD and Dual-Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT M1(eMTC) and NB-IoT up to 375kbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. the module provides much flexibility and ease of integration for customer's application. The biggest advantage of the product is low power consumption. General features * Single-Band TDD-LTE B39 * Three-Band FDD-LTE B3/B5/B8 * GSM/GPRS/EDGE 900/1800 MHz * Control Via AT Commands * Supply voltage range: 3.4V~ 4.2V, Typ:3.8V * Operation temperature: -40â?? to +85â?? * Dimension: 24*24*2.6 mm * Weight: 3.0g * GNSS Specifications for Data transfer * LTE CAT M1 - Uplink up to 375kbps, - Downlink up to 375kbps * NB-IoT - Uplink up to 72kbps, - Downlink up to 32kbps * EDGE Class - Max. 236.8Kbps(DL/UL) * GPRS - Max. 85.6Kbps(DL/UL) Other features * USB Driver for Microsoft Windows2000/XP/Vista/Win7/Win8/Win10 * USB Driver for Windows CE/Mobile * USB Driver for Linux /Android * RIL supporting for Android/WindowsCE/Mobile * Firmware update via USB * TCP/IP/IPV4/V6 Multi-PDP,MT PDP * DTMF* * Gobi SDK to the Win7/Win8/Linux * MBIM to Win8 * Source code of the PC manager of the device for reference Interfaces * USB2.0 * UART * SIM card * GPIO * ADC * PCM*
SIM7600X-H-PCIE is a complete multi-band LTE-FDD/LTE TDD/HSPA+/UMTS/EDGE/GPRS/GSM module solution in Mini PCIE type which supports LTE CAT4 up to 150Mbps for downlink and 50Mbps for uplink data transfer.It is combined with a SIM7600X-H (LCC) module and a Mini PCIE adapter board. Target market: EMEA/Korea/Thailand SIM7600E-H-PCIE * Support 4G LTE FDD Band B1/B3/B5/B7/B8/B20 and TDD Band B38/B40/B41 * Support 3G UMTS/HSPA+ B1/B5/B8 * Support 2G GSM/GPRS/EDGE B3/B8 * GSM/GPRS/EDGEB3/B8 General features * Mini PCIE package * Control Via AT Commands * Supply voltage range: 3.0V~ 3.6V, 3.3V Typical * Operation temperature: -40â??to +85â?? * Bandwidth: 1.4/3/5/10/15/20MHz * 3GPP E-UTRA Release 11 * Dimensions: 50.8*31*5.35mm * Weight: 12.6g Specifications for Data transfer * LTE Downlink up to 150Mbps, Uplink up to 50Mbps * HSPA+ Downlink up to 42Mbps, Uplink up to 5.76Mbps * WCDMA Downlink/Uplink up to 384Kbps * EDGE Downlink/Uplink up to 236.8Kbps * GPRS Downlink/Uplink up to 85.6Kbps Other features * USB Driver for Microsoft Windows 2000/XP/Vista/Win7/Win8/Win10 * USB Driver for Linux /Android * RIL supporting for Android 2.4/4.0/5.0/6.0/7.0 * MBIM to Win8 * Firmware update via USB * TCP/IP/IPV4/IPV6/Multi-PDP/FTP/FTPS/HTTP/HTTPS/SMTP/SMTPS/DNS * SSL3.0/TLS1.0/TLS1.2 * DTMF (Sending and Receiving) * Audio Playing * USB Audio and VoLTE * FOTA * eCall* Interfaces * USB2.0 with High speed up to 480Mbps * UART * GPIO * Antenna: Solder pads for Primary, Rx-diversity and GNSS antennas * (U)SIM card (1.8V/3.0V) * Digital Audio through PCM * Analog Audio (Optional) * Embedded SIM card socket (Optional) * GNSS: GPS/GLONASS/Beidou/Galileo*
Techwin DIN rail 40kA Class C surge protection deviceSPDTüV certificated for Three-phase 380V AC system APPLICATIONS: Class C Surge Protective Device for AC Power System. A. Power distribution box(cabinet) B. AC cabinet, cabinet air conditioner, C. PV inverter, Solar inverter, inverter charger, inverter cabinet D. Switching mode power supplySMPS Box, SMPS cabinet high-frequency switching mode power supply,UPS system E. Data center, IDC power system, Column head cabinet F. Charging station/charging point Sensitive electronic equipment pulse width modulation(PWM box) Automatic control panels, motor control panels IT,TT,TN-C,TN-S,TN-C-S and other power supply system. FEATURES: DIN rail mounting for easy installation Plug connectors for quick and easy connection or rewiring 40kA maximum surge current Thermal disconnect device Status indicators visually verify protection level Surge protection device with N-PE residual current spark gap as 3+1 circuit Remote alarm function ISO 90012008 certificatedISO14000:2004 certificated and OHSAS180002007 certificated High quality products with TüV, CE, UL certificate TECHNICAL PARAMETER ModelM40B3+N Electrical parameter Nominal working voltage Un 50/60Hz 220/380V, 230/440V Max. continuous operating voltage Uc385V Nominal discharge current8/20µsIn20kA Max. discharge current 8/20µsImax40kA Protection level @20kA , 8/20µs Up1500V Let through voltage @3kA , 8/20µs800V Response time tA25ns Protection modeL1/L2/L3-N, N-PE General data Dimension90 (H)Ã?72 (W)Ã?65(L)mm Weight per unit500g Mounting35mm DIN rail Recommend cross-sectional areaL/N 10mm2 PE16mm2 IP codeIP20 Working conditionsTemperature: -40 to 80, Relative humidity: 95 Test standardsIEC61643-1, UL94-V0, ROHS
CE-D-type three-phase AC intelligent digital display is a programmable function, automatic measurement, digital display, the cumulative power, the standard analog, switch, RS485 output and other functions of the integrated power parameter detection instruments. With high precision, good electromagnetic compatibility, good looks and so on. Can be set according to demand voltage, current, power, power factor and any one of the corresponding standard analog output; any set voltage, current limit, hysteresis, upper limit alarm or lower limit alarm and other parameters; Free to set the communication address (0-255), display ratio and so on. Accuracy class: 0.5, 0.2 (current, voltage) The maximum display: 9999 Maximum resolution: Voltage: 0.1V Current: 0.001A Input: 500V * 5A Analog output: 0-5V 4-20mA Communication output: RS485 (baud rate: 9600bps; data format; start bit 1, data bit 8, stop bit 1, no parity) Switch output: a group of relay contact output, contact capacity 5A / 250VAC Function settings: switch control value, back to the difference, the working mode; analog output mode and input mode; the address; display variable ratio; screen display parameters of the switch. Auxiliary power: 85 ~ 265V Power consumption: â?¤ 4.5VA Isolation voltage: power supply / input / output between â?¥ DC2.5KV / min.1mA Pulse group interference: 1.6KV Power against lightning surge: 4KV Shell material: ordinary plastic Face plate installation, behind the wiring Dimensions: 96 Ã? 96 Ã? 110mm Installation hole size: 91 Ã? 91mm
P1.25 HD LED Display Fine Pixel Pitch LED Displays Model: LS-DI-P1.25-MF-0.6mx0.3375m Application: HD Indoor Fixed Installation Enquiry us Feature Light weight,one person is able to carry one cabinet and install easiy.It makes the screen convenient in assmbly and transport. Urtra Thin,the depth of the cabinet is 63mm. Seanless assembly,the whole cabinet is die-cast. State-of-art indoor 3in1 SMD. Front Serviceable Specification Parameter Value Model LS-DI-P1.25-MF-0.6mx0.3375m Pitch 1.25mm Resolution per panel 480*270pixel Dot per panel 129600 Dot per sq. meter 640000 Brightness 800nits Color temperature 6500 deg. K Viewing angle Horizontal 140(-70 ~ +70) deg. Viewing angle Vertical 140(-70 ~ +70) deg. Panel weight 7.5kg Panel size 600*337.5*63mm Panel area 0.2025sq. m. Panel material Epoxy paint coated Die-cast aluminum Service access Magnet module front service Operating temperature range -20 to +60 deg. C Humidity operating RH 10% ~ 60% Pixel type and configuration 3-in-1 SMD Colors 281 Trillion Grey scale (linear) 65536 Levels Brightness control 256 Levels Contrast ratio 3000:1 Processing depth 16 bit Video frame rate 60 Hertz Display refresh rate 1920 Hertz Input voltage (nominal) 110 to 240 VAC Input power frequency 50 to 60 Hertz Input power (max) 800W/sq.m Input power (avg.) 320W/sq.m Lifetime (50% brightness) â?¥100,000 Hours Red wavelength (dominant) 620~625 nm Green wavelength (dominant) 520~525 nm Blue wavelength (dominant) 470~475 nm Multimedia data format DVI,MPG,AVI,WMV,RM etc. Data interconnection UTP Cat 5 Mounting system Fixed installation
P1.25 HD LED Display Fine Pixel Pitch LED Displays Model: LS-DI-P1.25-MF-0.6mx0.3375m Application: HD Indoor Fixed Installation Enquiry us Feature Light weight,one person is able to carry one cabinet and install easiy.It makes the screen convenient in assmbly and transport. Urtra Thin,the depth of the cabinet is 63mm. Seanless assembly,the whole cabinet is die-cast. State-of-art indoor 3in1 SMD. Front Serviceable Specification Parameter Value Model LS-DI-P1.25-MF-0.6mx0.3375m Pitch 1.25mm Resolution per panel 480*270pixel Dot per panel 129600 Dot per sq. meter 640000 Brightness 800nits Color temperature 6500 deg. K Viewing angle Horizontal 140(-70 ~ +70) deg. Viewing angle Vertical 140(-70 ~ +70) deg. Panel weight 7.5kg Panel size 600*337.5*63mm Panel area 0.2025sq. m. Panel material Epoxy paint coated Die-cast aluminum Service access Magnet module front service Operating temperature range -20 to +60 deg. C Humidity operating RH 10% ~ 60% Pixel type and configuration 3-in-1 SMD Colors 281 Trillion Grey scale (linear) 65536 Levels Brightness control 256 Levels Contrast ratio 3000:1 Processing depth 16 bit Video frame rate 60 Hertz Display refresh rate 1920 Hertz Input voltage (nominal) 110 to 240 VAC Input power frequency 50 to 60 Hertz Input power (max) 800W/sq.m Input power (avg.) 320W/sq.m Lifetime (50% brightness) â?¥100,000 Hours Red wavelength (dominant) 620~625 nm Green wavelength (dominant) 520~525 nm Blue wavelength (dominant) 470~475 nm Multimedia data format DVI,MPG,AVI,WMV,RM etc. Data interconnection UTP Cat 5 Mounting system Fixed installation
Data Storage Capacity: 2tb Operating System: Windows 10 Home 64: Display 14" diagonal HD SVA BrightView WLED-backlit (1366 x 768) Primary Battery: 3-cell, 41 Wh Lithium-ion prismatic Battery Audio: Dual Speakers Network Interface: Integrated 10/100/1000 GbE LAN Dimensions (W X D X H) 13.18 x 9.21 x 0.78 in Weight: 3.24 lb Warranty: 1 Year Limited Hardware Warranty Theft Protection: Absolute Home & Office Energy Efficiency: Energy Star® Certified; Epeat® Silver Registered Color: Jet black,Snow white,Natural silver,Pale Gold,Smoke gray, Scarlet Red,Twilight Blue Keyboard: Full-size island-style keyboard (Jet Black),Full-size island-style keyboard (Snow White) Processor and graphics: AMD A6-9225 Dual-Core (3.1 GHz, up to 3.7 GHz, 1MB cache)+AMD Radeonâ?¢ R4 Graphics Memory: 8 GB DDR4-2400 SDRAM (1 x 8 GB) 64 GB eMMC 1 TB 5400 rpm SATA 128 GB M.2 SSD 256 GB PCIe® NVMeâ?¢ M.2 SSD 1 TB 5400 rpm SATA; 256 GB M.2 SSD Office software: Microsoft® Office 365 Personal Microsoft® Office 365 Home Microsoft® Office 2019 Home and Business McAfee LiveSafe(TM) Security Software: Security Software McAfee LiveSafe Personalization:HP TrueVision HD Camera with Digital Microphone (Jet Black) HP TrueVision HD Camera with Digital Microphone (Snow White) 802.11b/g/n (1x1) Wi-Fi® and Bluetooth® 4.2 combo Intel® 802.11b/g/n/ac (1x1) Wi-Fi® and Bluetooth® 4.2 Combo External I/O Ports: 2 USB 3.1 Gen 1 (Data transfer only); 1 USB 2.0; 1 HDMI 1.4b; 1 RJ-45; 1 headphone/microphone combo
DOS-1703 Portable Dissolved Oxygen Meter DOS-1703 portable dissolved oxygen meter is outstanding for ultra-low power microcontroller measurement and control, low power consumption, high reliability, intelligent measurement, using polarographic measurements, without changing the oxygen membrane. Having reliable, easy (one-hand operation) operation, etc.; the instrument can display dissolved oxygen concentration in two kinds of measurement results indicates, mg / L (ppm) and the oxygen saturation percentage (% ), in addition, measure the temperature of the measured medium simultaneously. Technical indexes Measuring range DO 0.00--50.0mg/L 0.0--500% Temp 0 60 ATC/MTC Atmosphere 300--1100hPa Resolution DO 0.01mg/L,0.1mg/L(ATC 0.1%/1%(ATC Temp 0.1 Atmosphere 1hPa Electronic unit measurement error DO ±0.5 % FS Temp ±0.2 Atmosphere ±5hPa Calibration At most 2 point, (water vapor saturated air/zero oxygen solution) Power supply DC6V/20mA; 4 x AA/LR6 1.5 V or NiMH 1.2 V and chargable Size/Weight 230 100 35(mm)/0.4kg Display LCD Sensor input connector BNC Data storage Calibration data99 groups measurement data Working condition Temp 5...40 Relative humidity 5%...80% (without condensate) Installation grade â?¡ Pollution grade 2 Altitude
Thermal Gap Pad, thermal pad, thermal gap filler GLPOLY thermal pad is featuring a high thermal conductivity of 6.0W/mK, its higher than that of most of competitor. Comparing with Bergquist gap pad 5000S35, the data will shows that GLPOLY thermal gap filler pad can perfectly replace the BQ 5000S35. Firstly, the thermal conductivity of GLPOLY thermal gap filler pad is higher that that of BQ 5000S35; the thermal resistance is only 0.16in2/W, its just one third of BQ 5000S35. Comparison data reflects that GLPOLY thermal gap filler pad offers more excellent thermal performance than BQ5000S35. For the electrical property, the dielectric breakdown voltage is 16KV, its 3 times greater than BQ 5000S35s. this will ensure the stability of performance of devices. The material yields extremely soft characteristics while maintaining elasticity and conformability. Conforms to demanding contours and maintains structural integrity with little or no stress applied to fragile components. The inherent natural tack on both sides assists in application and allows the products to effectively fill gaps, reducing thermal resistance and enhancing the overall thermal performance. GLPOLY thermal gap filler pad is ideal for high-performance application at low stress or pressure. Features Ultra conformability Designed for low-stress applications Fiberglass reinforced for puncture, shear and tear resistance ThicknessMm---- 0.3~5.0 Densityg/cm3---- 2.6 ,HardnessShore 00--20,20 Thermal Conductivity W/m*K--2.0,2.8
In the instruments industry, the traditional 4 20 mA analog transmitters are upgrading to the fieldbus with digital communication. HART fieldbus communication has digital communication capability with compatible analog signal. HART MODEM is a necessary and convenient tool for the analog products upgrading and signal exchanging in the control plant. We provide two kinds of HART modem. HART-RS232 is the converter for HART signal to RS-232 signal. HART-USB is the converter for HART signal to PC virtual series port. Product characteristic: According to the HART physical layer specification Isolated transformer prevents the influence of earthing. Voltage signal modulator/demodulator Low power consumption designation Powered by series port or USB port Interface Type: DB9 female mount Ambient Temperature: 0 ~ 50 °C Compressive Strength :500 V AC HART bus and serial port (UART,USB) Receiving Impedance : â?¥5 K Ω, end-to-end Output Signal VPP: 600 mV â?¥ VPP â?¥ 400 mV, 500 Ω load resistance Receiving Sensitivity: 120 mV, 500 Ω test resistance HART-RS232 is the protocol converter between HART device and configurator on PC. The figure above is a sample basic case. To connect multiple HART device, please connect the other devices parallel with the Transmiter. Please note that the power should support multiple devices and the terminator should be set in the middle of the power and parallel point. HART-RS232 is a HART MODEM with voltage modulator/demodulator. To communicate with a HART device, please connect the clincher of HART port of HART-RS232 to the two terminals of the network adaptor resistance or the power of HART device. To communicate with a PC, please connect the other port of HART-RS232 to the series port of PC. The USB driver installation program should be run for HART-USB. The driver provides a virtual series ports for HART configurator software. The indication light shows the state of modem. Green LED indicates the power is working well and the modem is sending data. Red LED indicates the modem is receiving data
1.Product Description YJS-720 two components platinum cured silicone with 1:1 mixing ratio by weight. It is soft food grade silicone, with 20 Shore A hardness, which is suitable used for moulding chocolate & icing sugar, candy, cakes, fondant. 2.Features: A. Amazing fluidity and easy to operate A. Platinum-based, food-grade silicone (environmental friendly, odorless and non-toxic) B. Delicate design available C. Mixing ration: 1:1, easy to mix D. Easy de-molding E. Excellent tension and tear strength F. High performance in duplication G. Shrinkage is almost zero (below 0.1) H. Excellent resistance to weather, temperature, aging, acid and aging-proofing. I. High resistance to high temperature and aging(resist -60 to 250) J. Food safe 3.Technical Data Typical general characteristics Inspection Method Value Product data (Catalyzed A+B) YJS-720 Hardness Shore A 20±2 Mix Ratio A:B 1:1/10:1 Color / translucent Pot life 25 °C (77F) 30-40mins Curing time 25 °C (77F) 3-4 hours Mixed viscosity mPa.s 5000±1000 Tear-strength kg/cm 20±2 Tensile-strength M.pa 4.0±1.0 Elongation % 500±50 Shrinkage % â?¤0.1% 4.Appearance: Part A: a non-toxic and odorless liquid with translucent color and platinum inside Part B: a non-toxic and odorless liquid with translucent color. ATT: We can do any curing time as your requirements. Notice: What is the hardness should I choose Normally 5~55 Shore A will be the best, but it also should according to your size and pattern design. 5.SHELF LIFE: When stored at or below 32°C (89.6°F) in the original unopened containers, G-8 series Silicone have a usable life of 12 months. 6.Package 1kg/drum; 20kg/drum;25kg/drum;200kg/drum.
It is mainly used for testing dynamic and static mechanical properties of various materials, parts, elastomers, rubber elastomers and shock absorbers.Its could proceeding tensile,compression,curve,low-cycle&high-cycle fatigue,crack growth,,fracture mechanics under sine wave,triangular wave,square wave,trapezoidal wave,oblique wave,customized waveform etc. The operation is flexible and convenient, and the lifting, locking and clamping of the moving beam are all completed by the button operation. The advanced hydraulic servo drive loading, the high-precision dynamic load sensor and high-resolution magnetostrictive displacement sensor are used to measure the force and displacement. Full digital measurement and control system to achieve force, displacement, deformation closed-loop control, Own powerful data processing function under WINDOW10 software, powerful data processing and saving, displaying & printing . All testing process is controlled by computer. Standards as follow, < JB/T9397 Specification of Tension-compression Fatigue Testing Machine> < GB228 Metallic Materials-Tensile Testing at Ambient Temperature> Model DPL-9005 DPL-9010 DPL-9030 DPL-9060 DPL-9100 Max load Dynamicï¼?kNï¼? ±50 ±100 ±300 ±600 ±1000 Staticï¼?kNï¼? ±50 ±100 ±300 ±600 ±1000 Accuracy of measurement Load Static is superior to ±0.5%, Dynamic is superior to ±1.0% Deformation Static is superior to ±0.5%, Dynamic is superior to ±1.0% Displacement superior to ±1.0% Dynamic-testing Frequency (Hz) 0.01ï½?100 Waveform Sine wave,triangular wave,square wave,oblique wave,trapezoidal wave,self-defining fuctio100n Amplitude According to the displacement of hydraulic servo pump to determine the frequency and amplitude. Mechanical parameter Structural style Two columns Four columns piston strokeï¼?mmï¼? ±75(±50) Column spacing 600 750Ã?600 Tensile spacingï¼?mmï¼? 750 900 Control mode Load,deformation and displacement are closed loop control with smoothly converting. Software testing All processing controlled by computer under windows10.
TH-206H-KG3 Gantry Benchtop robot with rotary Dispensing valve Patent Number ZL 2010 2 0120765.6 FEATURES 1.Feed system is 310ml cartridge silicone, Good for storage material by 310ml,400ml,500ml,600ml cartridge hard packing. 2.Rotary dispensing valve Suitable for high viscosity fluids,Constant uniform bead dispensing 3.High precision liquid controller system. Applicationï¼? Good for storage material by 310ml cartridge hard packing. Precision dispensing silicone on the product. Liquid Material: adhesive, glue, silicone, RTV, sealant,paste adhesive. Packing capacity:310ml,400ml,500ml,600ml cartridge hard packing Specification ITEMTH-206H X/Y/Zworking range300 x 300 x 100mm Dimensions (WxDxH) mm600 x 520 x 610 Weight34kg StandardCE Approved XY/ZMaximum Load10 kg / 3 kg Repeatability0.02mm Resolution0.001mm XY/Z Speed800/350 mm/Axis Data memory capacity9999programs Display wayLCD display Drive SystemPrecision micro-stepper motor TransmissionTiming Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals4 Inputs / 4 Outputs Port allows for dataUSB port allows for data transfer between PC Patterns3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power SupplyAC110V/220V Internal conversion Working Temperature0 ï½?40 Relative Humidity20ï½?90% (no condensation) Help you more: · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste · Create more economic benefits for the enterprise.
TH-206H-2004AB2 Gantry Benchtop robot for epoxy resin with automatic cleaning function Patent NumberZL 2010 2 0120750.X FEATURES 1.Feed system of 2pcs of 4 liter tank and 1pcs of 2 liter tank ,Reservoir Tanks are used to feed bulk fluids to a valve 2.Valve is Precision suck back valve, close glue quickly,ensures no dripping 3.High precision liquid controller system. Application Good for precision dispensing low to medium viscosity liquids (less 10000cps),mixing ratio from 1:1-1:3 by weight Liquid Material:Epoxy resin,AB Glue, ab adhesive,epoxy glue ab,two component,two part/2 part(ab)epoxy glue Packing capacity:tank (0.5liter,2liter,4liter,20liter can option) Help you more: · Increase production efficiency · Promotion processing precision control · Improve product quality · lower production costs, reduce rejected product · Eliminate material waste · Create more economic benefits for the enterprise. Specification ITEMTH-206H X/Y/Zworking range300 x 300 x 100mm Dimensions (WxDxH) mm600 x 520 x 610 Weight34kg StandardCE Approved XY/ZMaximum Load10 kg / 3 kg Repeatability0.02mm Resolution0.001mm XY/Z Speed800/350 mm/Axis Data memory capacity9999programs Display wayLCD display Drive SystemPrecision micro-stepper motor TransmissionTiming Belt/ Precision Linear Guides Edit Programming Handheld Programmer I/O Signals4 Inputs / 4 Outputs Port allows for dataUSB port allows for data transfer between PC Patterns3DLines, Circles, Arcs, Continuous Paths, XYZ simultaneous (CP) 3D Power SupplyAC110V/220V Internal conversion Working Temperature0 40 Relative Humidity2090% (no condensation)
Auto Tensile Tester Features 1: 3 patents and 2 counts of software copyright registration. 2: Bilingually controlled by computer and embedded system. 3: Highly accurate load cell, Bi-direction test. 4: High performance servo drive. 5: Test speed can be preset freely through software. 6: Selectable load cell: 50N, 100N, 250N, 500N, 1000N. 7: Silence running, < 25db@1000. 8: ISO, ASTM standards test available and non-standard test available. 9: Electronic limit, computer preset, non-mechanical limit. 10: Overload protection, less power consumption. 11: DB9 RS232 communication port . 12: Tensilyst workstation support. 13: Tensile, break force, elastic modulus, seal strength, 90 peeling strength, 180 peeling strength test available. 14: Historical data traceable, system log. 15: 5 degrees user management. 16: Group test, auto multiple curves display, auto statistic calculation. 17: DSM system is optional(Laboratory Management Information System), easy to manage test data. Standards ASTM D882, ASTM D828, ASTM E4, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, GB1040, GB8808, GB4805, GB7753, GB 7754, GB 453, GB/T17200, GB/T16578, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, JIS P8113, QB/T2358, QB/T 1130
1.Brief Introduction ST332B VDSL tester is multi-functional hand-held VDSL2 test instrument with small size, specially designed for xDSL line test (xDSL include: ADSL, ADSL2, ADSL2+, READSL, VDSL2 etc) and maintenance It provides xDSL test, PPPoE dial test, DMM test, Modem emulation, line voltage indication and so on. The tester adopts LCD display and menu operation which can display the test results directly and improve the xDSL broadband service greatly. Itâ??s the best choice for the field operators of installation and maintenance. 2. Key Features Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2 Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance) Supports Modem emulation and simulating login to Internet Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test) Supports all multi-protocol, PPPoE / PPPoA (LLC or VC-MUX) Connects to CO via alligator clip or RJ11 Rechargeable Li-ion Battery Beep and LEDs alarm indications (Lower Power, PPP, LAN,xDSL) Data memory fuction LCD display, Menu operation Auto shut off if no any operation on keyboard Compliant with all known DSLAMs Software management Simple, portable and money-saved 3. Functions DSL Physical layer test Modem Emulation (Replace the user Modem completely) PPPoE Dialing (RFC1683,RFC2684,RFC2516ï¼? PPPoA Dialing (RFC2364) Telephone Function DMM Test Ping Function (WAN & LAN) Data upload to computer and software management Setup system parameter: backlight time, shut off automatically time without operation, press tone, Revise PPPoE / PPPoA dial attribute, user name and password; restore factory value and so on. Check dangerous voltage Four grades service judge(Excellent, Good, Ok, Poor)
china coal 0001 Introduction Of XTZZL Intelligent Tensioning System 1. China Coal Group's intelligent tensioning system has double top or multiple top synchronous tensioning, automatic measurement of oil pressure and top extension, which can simultaneously control the strength and elongation, reduce the error accuracy can reach 1% FS. 2. Using the hydraulic circuit self-locking function, it can maintain the state of the oil cylinder for a long time after stopping the oil supply. 3. According to the parameters, it is automatically verified whether the tension is qualified during the tensioning process, and the elongation is excessively long or insufficient for automatic shutdown. Automatic or manual compensation is performed according to actual conditions. 4. It adopts servo control system, touch screen operation, imported PLC control, digital control hydraulic pump station main and auxiliary stations and computer wireless connection, remote operation. Easy to move, operating system is easy to learn. 5. Record tension data in real time, automatically organize data, generate reports, and intelligently manipulate tensioning processes to truly realize intelligent operations. Parameter Of XTZZL Intelligent Tensioning System Name Parameter System Tension Force Accuracy 0.25%F.S Displacement Measurement Accuracy 0.05%F.S Operating Temperature -20- +70 Monitor Computer Operating Voltage 220V 50Hz Hydraulic Sensor Accuracy 0.2%F.S Hydraulic Sensor Range 0-60Mpa Pump Station Rated Flow 3L/min Pump Station Rated Working Pressure 50Mpa Pump Station Operating Voltage 380V(10%) 50Hz Jack Tension 270-6000KN Single Pull Distance
- Analog Detector mode; This mode is used for detecting and locating sources of radio-frequency radiation. Near the source of radio-frequency radiation the LEDs begin to light in sequence, and the loudspeaker emits stepwise rising tone. - Digital Detector mode; T163902 becomes practically irresponsive to the stationary analog signals. In this mode the field detector responds to radio-frequency signals with the digital modulation, mostly of the GSM standard and other low-speed data transfer protocols. This mode does not ensure guaranteed detection of the radio-frequency radiation sources with high-speed data transfer protocols or can only provide it for conditions of the complete radio silence and the low level of external background interference. - - White Noise Generator mode; The noise spectral density can be displaced in either direction. - White Noise Generator mode on a Analog Detector Signal (triggered on a radio-frequency analog signal exceeding specified level, with a White Noise generating); It is designed to protect the adjacent area from the presence of analog portable or remotely activated hidden listening radio devices. It responds to exceeding the preset threshold level, with a White Noise generating. Technical Specifications Detectable frequency range: 1 ÷ 8000 MHz Vibration mode for hidden detection Input signal intensity range: from -60 dBV to 0dBV Dynamic range of detector: 60 dB Battery capacity: 1200 mA*h Current consumption in Detection mode: - at low sound level: from 120 mA - at medium sound level: from 220 mA Current consumption in White Noise Generator mode: - at low sound level: from 50 mA - at medium sound level: from 130 mA - at maximum sound level: ~ 330 mA Battery charging time: 4 ÷ 7 hrs Working time in Detection mode - at low sound level or w/o sound: up to 10 hrs Size of device w/o antenna: 110mm Size of device w/ antenna: 215mm Accessories Radio Frequency Detector -Bug Detector Antenna Power Adapter 100-240V/5V User manual - English
The main functions and features : Meter circuit design and selection of the components are according as the tolerance of greater choice of environment, so we can guarantee long-term stability of a piece of work. Basically error will not affected by the frequency, temperature, high harmonics, and the installation of location is arbitrary. After sealing unit manufactured without adjustment, greatly reduced the power sectorf+s workload of testing and calibration, meter - button box with pulse interface light coupler facilitate error testing. Detection the constant of pulse output / kw.H to find weather it is the same as constant table marked on nameplate meter, meter also provides low-frequency pulse acquisition (opts). When the one phase of three-phase three-line network is broken, three-phase four-wire network with a two-phase power outages, the watt-hour meter still normal, and display the lost pressure. Power meter in the factory before carefully debugging and test the installation of qualified lead seals. Energy applies to an ambient temperature of -25 fp c to 70 fp c and relative humidity over 85% of the region. Main technical parameters Reference voltage 220/380v 3 * Voltage reference 0.7 u un .2 b -1. Current specifications 3 * 5 (20) a. Reference frequency 50hz. Grading accuracy 2.0 Starting current 0.4% ib. Voltage power lines "0.8w Communication transmission distance 5m. Environmental conditions -25fï+70elative humidity -_85% Automatic relay depth Data transmission speed Center frequency Dimensions. Current specifications 10-40a Reference frequency 50hz. Grading accuracy 2.0 Starting current 0.4% ib. Voltage power lines "2w Communication transmission distance 5m. Environmental conditions -10f¦f+50f¦relative humidity Automatic relay depth Data transmission speed Center frequency Dimensions 166 * 123 * 74.