Thermodrain FRP/GRP covers serve a dual purpose. They are not only superior to conventional Cast Iron and Ductile Iron covers but are light weight. They are tested as per BS EN 124 1994. Our covers are even immune to algae and rusting contaminants. They meet all the requirements of the code. They are available with hinged and locking arrangement. THERMODRAIN GRP / FRP / COMPOSITE WATER TANK COVERS WITH FRAME All the sizes of water tank covers are available in the following load bearings. 500 kgs / 10 tons / 12.5 tons (B 125) / 20 tons.
Thermodrain FRP/GRP tank covers serve a dual purpose. They are not only superior to conventional Cast Iron and Ductile Iron covers but are light weight. They are tested as per BS EN 124 1994. Our covers are even immune to algae and rusting contaminants. They meet all the requirements of the code. They are available with hinged and locking arrangement. THERMODRAIN GRP / FRP / COMPOSITE WATER TANK COVERS WITH FRAME All the sizes of water tank covers are available in the following load bearings. 500 kgs / 10 tons / 12.5 tons (B 125) / 20 tons
Uses: Grouting and fixing of equipment foundation. Grouting and fixing of anchor bolt. Grouting and fixing of structural steel column soleplate. Installation and fixing of bridge pot rubber bearing. Grouting and fixing of bridge expansion joint. Grouting and fixing of wind power base and pre-stressed Tensioned anchor bolt. Installation and fixing of rail spike. Installation and fixing of various structural components. Grouting and fixing of beams and columns section-increasing And shear wall-thickening. Instructions: Recommended mechanical mixing, strictly no manual drill Mixer. Recommended amount of mixing water: 12~14%. 25kg/bag
Characteristics Ptfe skived sheets are manufactured from virgin ptfe granular resins which are molded, sintered, and skived to the appropriate thickness. Ptfe sheets have outstanding characteristics, including heat and chemical resistance, low coefficient, wide range of practicable temperature from -180 ~ 260¡ãc, dielectric strength and anti-stick properties, etc. Applications Corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide Packed in wooden case with plastic film lined
Characteristics Ptfe skived sheets are manufactured from virgin ptfe granular resins which are molded, sintered, and skived to the appropriate thickness. Ptfe sheets have outstanding characteristics, including heat and chemical resistance, low coefficient, wide range of practicable temperature from -180 ~ 260¡ãc, dielectric strength and anti-stick properties, etc. Applications Corrosion-resistant liner, seal, lining and gasket, scrap, guide rail, dielectric material for different frequency, bridge bearing slide Packed in wooden case with plastic film lined
Numerical control water cutting table is customized to design the size of table. It is available in bridge arm, flying arm, mobile guide rail and other designs. The biggest working table is 2*4m. The cutter can be adjusted up and down within 250mm. It is also called two and half dimension water cutting workstation. The movement through ball bearing screw and linear guide, for that it can keep cutting table in low speed but no crawl from anti-friction. And adopting special desighed, wearing intensity reduced, staying the machine still has steady processing precision after for a long period.
Detailed product description Light weight formwork High bearing capacity formwork Rectangle concrete column formwork Square concrete column formwork H20 timber beam formwork for rectangle, square concrete column formwork Description: 1. Structure sketch Tbc system-a is a kind of formwork for pouring square or rectangle column, it is composed of four pieces of tim-formwork, yoke, tie rod, wing nut, etc. It will be designed according to column¡¯s size; the formwork¡¯s dimension is not adjustable. Competitive advantage: 1. Prefabricated connection, convenient and efficient.
* spindles are made of high carbon steel and machined by cnc lathe, having the capability of withstanding clamping, which prevents the internal tube from indenting and influencing the flow and matching. * the forged one-piece housing doesn!|t break easily, having high plasticity and utility and beautifies the overall outlook. * machined by powerful toothed-clamp, the fittings are tight and can bear high pressure without loosening, extremely safe. * 3 pieces integrated formation reduces costs. * our company also has plastic injection forming machines, special for making all types of plastic parts, fittings and plugs, etc.
Feed pump turbine drive packages are available from 100kw – 20mw. Complete steam turbine boiler feed pump packages are available, in addition to stand-alone steam turbine packages. 7 models, horizontal (axial and radial split), vertical , api 611- and 612-compliant, overhung and between-the-bearings wheel designs, metallic or carbon seals, electronic / hydraulic mechanical governors, customized steam path components, mechanical / electronic safety trip system, direct-drive or integral gear boxes with suitable lubrication systems.
Composition of the mixing tank The mixing tank consists of the mixing drum, mixing tank cover, mixer, bearing, gear reducer, shaft sealing device and so on, if customers have request , we can design and add heating or cooling device. Material of agitator tank includs carbon steel q235, stainless steel 304, 316l, pe , lined rubber or glass and so on. Agitator mixer tank and tank cover can be opened the feeding, discharging, observation, temperature, pressure, steam fractionation and safety vent pipe hole according to technological requirements .
specification: 3520 x 2230 x 3650mm. bearings: made from german. main structure: high quality carbon steel & umbrella membrance & moulded aluminium. main pipe diameter/ thickness: 250 x 150mm/ 4.00mm. double powder coating: epoxy powder coating as the basic powder coating(50-80mm), the second one is powder coating with regular colors (90-140mm). exercise part: legs. shot blasting machine: physical rust removal can clean the pipe surface efficiently, improve the absorbability of powder coating as well as environmental protection. packing: epe first and them weaving sack.
1). Easy to operate: it is very easy and convenient to operate the machine, unnecessary to train professional operators. 2). Stable performances: hydraulic power, pneumatically auxiliary, automatic locking, all-side limiting punching, independent claw rotating tool holder, self-lubricating bearing sliding steering mechanism, rodless cylinder outside feeding mechanism, idling time-limited halt function and 24-hour continuous running setting. 3). Safe and reliable: outer-machine feeding, photoelectric detection and safety guard for multiple protection.
Features : 1.High-pressurre use, meddle pressure use and low pressure use . 2.High filtering precision :25um Meddle filtering precision :1015um Low filtering precision : 1525um 3.Hydraulic filters can usually bear the pressure from 0.35 - to 0.4mpa, and some special filters up to 32mpa, and even 42mpa . Applications : 1. Metallurgy industry . 2.Petrochemical industry 3.Textile making areas. 4.Electronics and pharmaceutical fields. 5.Thermal power and nuclear power field, etc.
Name: waterborne acrylic resin Advantage: tiny particle, proper viscosity, excellent filming tenacity, elasticity, water resistance, scrub resistance and alkali resistance. Uses: 1), it could be use as adhesion agent in the luminous, semi-luminous or mat coating material. It has good weight bearing to the material, good adhesiveness and elasticity; 2) it could be also used as tougheningagent to luminous, semi-luminous or mat latex paints, leather and cementmortar. Storage: it should be kept in airtight container; away from extremelycold and hot condition, 10~35 centigrade condition is recommended. Color: milky white Weight: 50kg Best use before: 6 months from seal date.
45 degree standard head push button dental handpiece Features of handpiece: 1, push button type high speed handpiece, triple water spray, with quick coupling, ceramic bearing 2, supply air pressure at the back end of handpiece:0.22mpa 3, water supply of the handpiece:200kpa 4, rotation speed:30*10000r/min 5, chuck type:push button type 6, bur applicable: ¦µ1.59~¦µ1.6mm*21mm~23mm diameter *length 7, type qd easy to load or unload the handpiece with the quick coupling.And convenient to sterilize Size :1.6mm*21mm
Absolute Pearl White Granite is one common Kitchen and Table Counter top. It is widely seen in the Indian Subcontinent. It gives a pleasant look to the kitchen. There’s also some reality associated with the White color. Pearl White Granite stones can bear heavy loads in offices, homes and kitchens. The stone comes in a natural, smooth, glossy finish or could be subjected to processes like polishing, calibration, dusting and more depending upon your choice and the look that you want for the stone to be installed. Strongest wooden crates in 40 Ft Container.
Features: 1. Fitting: germany siegenia hardware accessories; 2. Aluminum material: 100 series of bridge-cut-off aluminum alloy profile; 3. Glass: double insulated tempered glass; 4. Color: heat transfer printing with timber grain or powder coating; 5. Application places: balcony, meeting room, etc. Advantages: 1. Easy to close or open the door; 2. Good looking and reasonable structure, waterproof and sound-insulation: 3. Impoted germany hardware, very strong load-bearing performance and durable. Good and safe package
Kaiv310 - 900 cfm [free air cfm rating Kaiv320 - 1400 cfm [free air cfm rating Kaiv322 - 2720 cfm [free air cfm rating Kaiv340 - 3820 cfm [free air cfm rating Kaiv3702 - 5450 cfm [free air cfm rating 28" hg maximum vacuum Air injection cooling Low pulsation tri-lobe impeller design Large oil sumps for increased bearing lubrication Robust reinforced main housing - quiet operations Kaiv320= wooden box packing, lot size: 4 nos, dimension: 45"x41"x25", gross weight: 600 kgs
Canned, pickled food processing equipment Application It suitable for soft package (hill wild, boiled vegetable, etc) sterilizing, cooling and air-drying. Capacity 300kg/h-1000kg/h Product characteristics * the equipment is made of 304 stainless steel except motor, bearing, etc. It is in compliance in export food sanitation standard. * it applies to processing of various bagged and canned products. * adjustable speed, stepless speed control and frequency control is any optional. * can automatically control blanching temperature within the range from 80 centigrade to 95 centigrade. * the tank of sterilization machine is made of perlite cotton board for keep temperature in order to allow the person to operate.
The main export of our the company is stainless steel, non-ferrous metals, scrap metals and bearings. The non-ferrous metals product: we also supply tin ingots, antimony ingots, zinc ingots, lead, ubc and so on, Lead ingots Pb (min): 99.97% Best price and prompt delivery time Model number: lead ingots Pb (min): 99.97% Alloy or not: non-alloy Secondary or not: non-secondary Material: lead Standards: bsen 12659: 1999 Usage: it is mainly used for making special type of lead alloys, lead sub oxide and semi conductors. 25kg /ingot, net weight 1050kg/ case, or as customer's requirements
