Function & Feature 1. Have microcontroller technology as the core, using the latest algorithms, to achieve precise measurement. 2. Voltage transducer converts an ac voltage input into a load independent output signal. 3. Excellent temperature characteristic and good working stability. 4. The output signal is based on the a root mean square(rms) measurement of the input signal and hence the transducer can be used with distorted waveforms. 5. The unit conforms to IEC 60688. In a addition it meets the insulation requirements of IEC 60255-5, clauses 5, 6 and 8 as well as the high frequency disturbance test of IEC 60255-22 for Class III test voltage.
Function & Feature 1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input signal. 2. These isolators can be used to prevent earth loops, which occur when a measuring source 3. Excellent temperature characteristic and good working stability. 4. It have an advantage over loop powered units, in that if for any reason the output lead should become disconnected, the input will not be saturated. 5. Fixed in a standard 35mm DIN rail or screwed on the cabinet. Specifications Inputs: System input 0~5V, 0~30V, 0~60V, 0~300V, 0~400V Absorbed power 0.1VA Output: Standard nominal outputs 4~20mA, 0-5V, (others on request) 0-20mA, 5-10V 0-10V Respones time
Function & Feature 1. QPPX electrical transducer measures a wide range of electrical parameters and generates analog or digital output signals suitable for interfacing with instrumentation and control systems. Total four channel output, with panel key or PC control programmable, user can free to set 4 different data from max 26 electrical parameter for sampling and analog signal output. 2. Have three channel digital inputs and optional RS485-Modbus communication functionality. Can monitor the galvanically isolated DI signal and programmed the transducer with customized SCADA software. Any of the measured parameters can be read out via the optional RS485-Modbus connection. 3. QPPX also can be used to configure the connection to the measured circuit for single-phase, three-phase three-wire, three-phase four-wire, balanced or unbalanced load. Can be connected to a variety of measuring and control devices and systems, such as analogue meters, PLC, computers, data loggers, digital instruments and telemetry systems. 4. Snap on to DIN rail 35 x 7.5 mm complies with DIN-EN 50022 BS 5584 Specifications Inputs: Nominal input 1 or 5 Amp C.T. connected 110V, 230V, 240V, 400V, 415V ac +/-20% Power consumption
Function & Feature 1. Have microcontroller technology as the core, using the latest algorithms, to achieve precise measurement. 2. Voltage transducer converts an ac voltage input into a load independent output signal. 3. Excellent temperature characteristic and good working stability. 4. The output signal is based on the a root mean square(rms) measurement of the input signal and hence the transducer can be used with distorted waveforms. 5. The unit conforms to IEC 60688. In a addition it meets the insulation requirements of IEC 60255-5, clauses 5, 6 and 8 as well as the high frequency disturbance test of IEC 60255-22 for Class III test voltage. Specifications Inputs: System voltages 100V,220V, 380V, 450V Absorbed power 0.5VA Frequency range 50Hz, 60Hz Output: Standard nominal outputs 4~20mA, 0-5V, (others on request) 0-20mA, 5-10V 0-10V Ripple
1.Type: convex array 2.Frequency: 3.5MHz 3.Compatible system: HIVision 6500, HiVision 5500,EUB-6000, EUB-6500 4.Application:Obstetrics,Abdominal 5.Condition: pre-owned one, original, in good working condition 6.With 60 days warranty
Toshiba PVT-661VT Endovaginal 10mm transducer 1.Type: Endovaginal 2.Frequency: 3-9MHz 3.Compatible system: Aplio 50 SSA-700A, Aplio SSA-750A, Xario SSA-660A 4.Condition: pre-owned and original, in good working condition 5.With 60 days warranty
Toshiba PLT-805AT Linear 56 mm Ultrasound Transducer 1.Type: linear 2.Frequency: 6.2-12.0 Mhz 3.Compatible system: Aplio 50 SSA-700A, Aplio SSA-750A, Aplio SSA-770A, Xario SSA-660A 4.Application: peripheral vascular and small part 5.Condition: pre-owned and original, in good working condition 6.With 60 days warranty
Rated input current AC 50A, 100A, 400A AC/DC Accuracy 1.0 Input Impedance (R) approximate zero Linear measuring range 0 - 1.2 times of rated input current Over Load Capacity 30 times of rated input current, 5s Frequency range 25Hzï½?5kHz Isolation Voltage(Input/Output) â?¥2500Vdc, for 1 minute Thermal drift 600ppm/°C Ambient Temperature -25ï½?+70 Mounting DIN Rail 35mm Mounting or screw mounting
Rated input current AC 50A, 100A, 400A AC/DC Accuracy 1.0 Input Impedance (R) approximate zero Linear measuring range 0 - 1.2 times of rated input current Over Load Capacity 30 times of rated input current, 5s Frequency range 25Hz~5kHz Isolation Voltage(Input/Output) 2500Vdc, for 1 minute Thermal drift 600ppm/ Ambient Temperature -25~+70 Mounting DIN Rail 35mm Mounting or screw mounting
P/N: M2734B hp TOCO Transducer 100% original Latex free one year warranty 1pcs/box
Function & Feature 1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input signal. 2. These isolators can be used to prevent earth loops, which occur when a measuring source 3. Excellent temperature characteristic and good working stability. 4. It have an advantage over loop powered units, in that if for any reason the output lead should become disconnected, the input will not be saturated. 5. Fixed in a standard 35mm DIN rail or screwed on the cabinet. 6. Ultra-thin dimension, suitable for limited space, the control cabinet.
Function & Feature 1. Isolate the DC voltage input signal from the DC Output signal, which is directly proportional to the input signal. 2. These isolators can be used to prevent earth loops, which occur when a measuring source 3. Excellent temperature characteristic and good working stability. 4. It have an advantage over loop powered units, in that if for any reason the output lead should become disconnected, the input will not be saturated. 5. Fixed in a standard 35mm DIN rail or screwed on the cabinet. 6. Ultra-thin dimension, suitable for limited space, the control cabinet. Specifications Inputs: System input 0~5V, 0~30V, 0~60V, 0~300V, 0~400V Absorbed power 0.1VA Output: Standard nominal outputs 4~20mA, 0-5V, (others on request) 0-20mA, 5-10V 0-10V Respones time
We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us
The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.
IPP power plant Speed Transducer SMCB-01-16L provides professional spare parts of turbines, generators, and boilers for brands. Our primary business are EHC, TSI, MEH, DCS, excitation system, hydrogen oil water system, sealing compounds, and insulation materials. provides multiple types of spare parts and equipments for power plant : #DF-Speed Transducer SMCB-01-16L-DF insulating felt sheet 2mm heater thermocouple TE-106 vacuum cleaner P-1259 thermocouple sensor TE-212 piston hydraulic pump SY400-YB-22 thermocouple wire type k W08B0691A oil pump cost 50FSB-30 thermocouple pt100 WRNR-010 K 5mm gasket JB/ZQ4080-2006 16 STEAM SEAL RING HP D300N-160200ARN thermocouple voltage WRNKD2-291 multistage centrifugal pumps DFB125-125-250 roots vacuum pump P1764-1 MECHANICAL SEAL L270 thermocouple k-type temperature sensor WRNK-231TZ M20*1.5 M6 thread WRNK2-231 thermocouple wire type k TE-213 thermocouple replacement WRNK2-292 electric centrifugal pump head DFB 80-50-220 AST Solenoid valve seat OPC G130519 axial piston pump M03EA10VSO45DFR1/31RVPA12 furnace thermocouple WRN-332NM Rexroth Hydraulic valve L-DB65F2-3X/16 UNLOAD VALVE 0508.919T0104.06AW DB24 transfer pump oil 3Gr1104 Speed Transducer SMCB-01-16L centrifugal pumps head DFB80-80-240 pump mechanical seal L270 vane pump working F3-20V(M)-5A(M)-C-22-R EH oil main pump inlet metal hose HH600-98RK-400 thermocouple k-type WRKK2-221 thermocouples extension lead wires TE-404 thermocouple wire type k TE-110 ORING DIAMETER: 85 X DIAMETER 3.53 NITRILE RUBBER BUNA 4101 platinum rhodium thermocouple wire WRN2-4312 vacuum filter M2225.8MCC1D1.5A centrifugal pump working DFB125-80-260 Current Transformer 11kV (1TA, 2TA) AS12/150B/2 metering piston pump PV152R5EC00 Check valve 216C10 piston pump hydraulic PV2R3-76-RBAF1 thermocouple type WREK2-294 centrifugal pump parts DF-DFB100-8 screw pump working ACF090 3 wire thermocouple WREK2-230 high temperature thermocouple WREK2-321 thermocouple probe WRNK2-331T thermocouple TE-211 k type thermocouple 1200c TE-403 hydraulic pressure pump 40FYW-40A piston plunger pump A3H56-FI01KK-10 vacuum oil pump 30WSRP Lens SXJZ-70B thermocouple cable WRNKD2-04A-II vacuum hand pump 30-WS P-2811 mechanical rubber seal 1D56-H75/95-00 axial piston variable pump PVH74QIC-RSM-1S-1X-C25-31 Sensor speed CS-1 G-100-02-01 stainless steel Thermocouple TC03A2-KY-2B/S19 high temperature thermocouple WREK2-334 5mm hydraulic vane pump F320V12A1C22R non-return valve DY25.PC265-DF Speed Transducer SMCB-01-16L DFYL-2022-2-14-ZYR
Pressure range: -1 600bar (optional) Accuracy: 0.5%F.S. Supply voltage: 12 36(24)VDC Output: 4-20mA (2 wire) 0-10V (3 wire) Operating temperature: -40 105 Compensation temperature: -20 80 Operating Current: 3mA Temperature drift (zero & sensitivity): 0.03%FS Long-term stability: 0.2%FS/year Response Time: 3ms Overload pressure: 150%FS Burst pressure: 300%FS Cycle life: 500,000 times Pressure connection: G1/4, NPT1/4 Electrical connection: Hirschman DIN43650C, M12 Housing Material: 304 Stainless steel Water-proof level: IP65 Explosion-proof level: Exia CT6 Weight: 0.25kg Medium: non-corrosive environment Sensor core: Al2O3-96% ceramic sensor Cable length: 1.0m by default
I221LY05-25 I222LY05-25 I224LY05-25 Output signals 0-5V AC/DC 0-5V DC 4-20mA Responding time 50us 100ms 150ms Power supply ±12V, ±15V DC ±12V, ±15V, +12V, +24V DC
Rated input current AC 20A, 30A, 40A, 50A, 70A, 90A, 100A AC Output signals 0-20mA ,4-20mA DC Accuracy 1.0 Input Impedance (R) approximate zero Responding Time 300ms
I221LY05-25I222LY05-25I224LY05-25 Output signals0-5V AC/DC0-5V DC4-20mA Responding time50us100ms150ms Power supply12V, 15V DC12V, 15V, +12V, +24V DC
Compression, alloy steel load cell. Mainly used for vehicle scales, platform scale and industrial weighing system. Each loaded 4