Co2 laser system treatment princple Co2 laser treatment using sealed-off co2 laser, wavelemgth 10600nm, the output invisible infrared laser beam is characterized by small, high energy density; laser beam output by the focusing mirror, the point of the target tissue can Power to tissue >15w Focal spot diameter
Catalytic co2 laser tube 1200*80 80w 9months 1400*80 100w 9months 1600*80 150w 9months Improved co2 laser tube 1600*60 80w 3months 1600*80 100w 6months Traditionalco2 laser tube 1200*60 60w 3months 1250*60 60w 3months
Technical parameters (the working area and laser power can be customized according to requirement) Model of machine CX-CO2-30/60/80/100(optional) Laser tube Co2 laser tube Cutting area110mm 110mm /300mm 300mm(optional) Laser power 30w/60w/80w /100w(optional) Marking speed0-7000mm/s Operating voltage Ac220v 10%, 50hz Location precision 0.01mm Working environmentTemperature humidity 0-95% Min. Line width0.015mm Min. Character0.3mm Graphic format supportedBmp, HPGL(PLT), JPEG, GIF, TIFF, PCX, TAG, CDR, DWG, DXF, COMPATIBLE HPG ORDER, SUPPORT DXF, PLT, BMP and dxt(tiandao embroider software), etc. Marking depth 0.01-0.2mm Working tableLift platform up to 1, 000mm from the bottom to the top Auxiliary devic eExhaust fan and cooling system Laser wavelength1064nm. Wooden case
1. Main Features: 1) Good compatibility: It can be applicable to 40W and 30W laser tube. 2) Fast response speed and effect. 3) Dramatically lengthen the life of laser. 4) Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, etc. 5) Easy control of laser power: Both 0-5V analog signal and PWM signal can control the laser power. 6) The power supply has open circuit protection: Under the condition of good protective earthing, the power supply can work in open-circuit for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply. 7) The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser. 8) The power supply adds a new function, that is timely scene judging which part is damaged, laser tube or laser power. 9) Application: acrylic sculpture, cut; fabric sculpture, cut; rubber sheet sculpture, cut, etc. 2. Specification: Input: Input Voltage: AC220V or AC110V to be specified when placing order AC frequency: 47440HZ Cold Surge Current: 60A(AC220V Input) 30A(AC110 Input) Current Leakage: 0.7m AAC220V Input 0.4mA(AC110V Input) Output Maximum Input Voltage: DC 25KV Maximum Output Current: DC 20mA Efficiency: 90full load Mean Time Between Failure (MTBF): 10000H Response Speed: 1msfrom the switch Signal is given to the output current up to 90% of the setting current Control Interface: TTL level switch control; high or low effective level can be chosen (details refer to the control terminal specification) Withstand Voltage: Input-Output, Input-Shell: AC1500V 10mA 60S; Output negative is connected with machine shell. Protection: can work in open-circuit condition for a short time Require a good protective earthing and avoid arc between the positive and the machine shell Environment: Operating Temperature£º-10~40¡æ£¬Relative Humidity (RH)90©‡ Cooling Way: Force-Air Cooling (FAC) Dimension: LH=167*144*97(mm). 2.7kg,32*25*22cm carton box.
Applying imported american co2 radio frequency laser and high-speed scanning lens system, collocated with high qualified optic components, stable laser electrical source and full auto-controlling system, produces precise, reliable and fast performance and long time's continuous running as well, it can be directly applied to mass manufacturing streamlines. Different powers ranging from 10 - 350w
1.Introduction The laser marking machine YMM-10C is applicable to almost any non-metal surface. It has many clear advantages with comparison to traditional marking methods, such as noise-free, stress-free, ink-free, hazard-free (Printing marking uses hazardous solvent handling and disposal), tools-free and wearing-free (Tools wear in stamping systems). Laser marking offers a quiet, clean, low maintenance and easily configured system for permanent marking of almost any surface. 2. Features Unique optics design Friendly and ergonomical man-machine interface Stable, precise and high-speed File format to support any CorelDraw format, e.g., PLT, BMP, DST, etc.. Embedded test and graphic design tools offers various editing features Barcode marking including Code 39, 93, 128, EAN-8, EAN-13, VIN, Data Matrix, QR Code, etc. , and serial numbers 3. Technical Parameters Wavelength 1064 nm Aiming laser Red Linear speed Adjustable, max 5000 mm/ s Line width Min 0.2 mm Letter size Min 0.8 mm Marking area F=160 mm 70 mm í- 70 mm F=220 mm 100 mm í- 100 mm F=250 mm 150 mm í-150 mm Power supply Single-phase AC 220 V í+ 10%, 50 Hz / 60Hz Input power Max 210W Dimension 550 mm x 290 mm x 650 mm Net weight ~33.75 kg Cooling Mode Air cooling 4.Standard Configuration Laser machine í- 1 set PC í- 1 set Marking software (In English) í- 1 set Operation manual (In English) í- 1 Wooden Case
Choices - Comprehensive selection of air- and water-cooled CO2 lasers with options to suit every need ò OEM BASIC- Available in air-cooled and water-cooled configurations ò OEM INTEGRATED - Available in air-cooled configuration with aluminum fan shroud - ideal for "bolt on" integration; no plumbing or chillers necessary ò Class IV - Available in air-cooled or water-cooled configurations with key switch and shutter safety interlocks
Widely used inglass,button,sign board,shoe material,cloth,package,toys,food,drink,pharmaceutical,daily cosmitics and craft gifts etc.various industries. Applicable for most of non-metal,such as wood products,leather,cloth,paper,glass,expory resin.acrylic etc.non-metal material and part metal that carried out surface treatment,such as Aluminium surface oxidized black color,iron surface painting etc. It has different power with different, so if you are interested in this kind of machine, welcome contact us for more info.
Wide range: can be used on many materials like metal, plastic, leather, alloy etc. Can be used in many industries like jewelry engraving, medical devices, phone case engraving, hardware industry, stainless steel tableware, electron components marking etc. Permanent marking: laser marking is a permanent marking. It wont fade, run or become less discernable as time passes like traditional marking including ink jet, hand engraving, dot-peen marking. Long service time: fiber laser model has over 100, 000 hours working life. Almost no maintenance during this period. Easy to operate: support almost any windows-based software like coreldraw, autocad, photoshop. No need to adjust q-switch easier than yag diode marking machine. High precision: 0.0025mm re-position accuracy. Minimum line width 0.01mm. Non-contact process: won't cause mechanical extrusion or mechanical stress to materials.
Co2 laser marking machine engrave non-metallic and partial metal. Widely used in food packaging, beverage packaging, pharmaceutical packaging, construction ceramics, clothing accessories, leather, fabric cutting, craft gifts, rubber products, electronic components, shell nameplate, etc. Applicable to paper, wood, glass, leather and other materials.
Application Wisely co2 laser marking machine.Laser marking on most of non-metallic materials. Laser markingacrylic, wood, leather, glass, ceramics, pvc, abs, plastic, bamboo, organic materials, epoxide resin, and paper, etc. Field:woodworks, craft gifts, electronic components, clothes, leather products, paper, medicines, food and package, etc. Advantages 1) adopted the imported co2 laser, its beam is of superior quality, stable light and low failure rate. 2) coordinated with the excellent servo motor, the high-speed scanning galvanometer is of high marking speed and precision. 3) the industrial control computer has strong capacity of resisting disturbance, assuring the stable work during the long period of industrial environment. 4) with powerful and friendly controller and software, easy operation, raise the working efficiency. 5) with reasonable and whole structure design, better stability and higher reliability. 6) synrad / coherent tube can be refilled, excellent performance, longer life (max. 45000 hours) and without maintainance. 7) be applicable to production line for flying marking. 8) strong compatibility, ttf font, shx, bmp, dxf, ai, plt and other format file output from coreldraw, photoshop, autocad, etc..
CO2 Laser Marking Machine CO2 Laser Marking Machine for sale custom Laser Marking Machine factory Why our CO2 laser marking machine more better Compact and portable structure Easy put into your trunk or your car boot Perfect Marking Performance Fiber source can use 30000 hours Working speed 5000-10000mm/s Field Lens from 110 to 600mm (different working area price different) High Speed scan head Red point : Clear the working path when it working. Control software : EZCAD Power consumption : 1-2 kw /H. Voltage AC220V10% ,50/60HZ or by customer need voltage. 5 years machine produce experience we have mastered the core technology of the Co2 laser marking machine. laser marking machine After-sale Service: 36 months guarantee of the whole machine, we will provide replacement or repair service when you need it. Software is on update for free whole life. English manual and CD video for machine using and maintaining will send to you with the machine. Our engineer can offer technical support in your country if necessary,or get train in our factory for free. 7*24h online technical support via Skype,Email,WhatsApp,Phone,Team Viewer,even on weekend even on vacation. Our CO2 laser marking machine has many advantages such as compact and portable structure, perfect marking performance and fiber source can use 30000 hours. What is Mainstream types of laser marking machines in 2020? They are fiber laser marking machine, 3d CO2 laser marking machine and semiconductor laser marking machine. For more information on precision laser cutting machine, please click here to browse our website.
It can be used for non-metal and thin metal processing. Widely used in advertising industry, handicraft industry, toys, clothing, construction, packaging, paper, etc. Applicable materials: stainless steel, carbon steel, acrylic, MDF board, clothing, leather, paper, etc. Working Size: 1300*900mm Laser Type : CO2 Laser Tube Laser Power : 150W/180W/280W/300W Control System: DSP Offline / USB Compatible Software : Autocad/Coreldraw/Photoshop Voltage : 220V/50Hz(110V/60Hz)
GSI UK original technology for Catalytic, GSI original inflation formula for CO2 gas, PERFECT LASER SPOT, negative high voltage structure, more stable & long time, excellent beam profile at all power levels, high stability output, 12 months lifetime, high vacuum technology for longlife time, laser tube and combined laser beam system as option, easy integration, HV power supply HV, alignment beam option, diffusion colled design.
Model No. CY-CO2Q100W Laser tube type CO2 hermetic glass laser tube Laser Wavelength 10.6um Engraving speed 0-64000mm/min Cutting speed 0-36000mm/min Processing area 100mm to 5000mm (optional) Cooling System Water cooling Control System DSP Laser Power 30W/50W/100W/150W/300W Mini. engraving character 2.0*2.0mm(Chinese character) 1.0x1.0mm (english words) Minimum linear width 0.1mm Positioning accuracy
A8s, adopting our own patented technology to modify the beam size and quality effectively that solves the beam distortion, increase the effective power. Inner lens upgraded. All inner lens and mirrors are imported from the u.S.. Adopting new catalytic technology to enhance coating firmness and catalytic consumption, stabled on longtime working, lifespan is longer. A8s is capable for thin metal and non-metal cutting, with better cutting performance.
30w50w co2 laser marking machine Features Detailed product description: General-purpose model. Laser unit, power supply and workstation all-in-one structure, highly efficient in laser marking, especially good at metal surface marking. Specification 1.Marking scope: 100mm x100mm 2.Whole machine size:1, 390x 1, 110 x1, 200mm 3.Marking depth:0.3mm 4.Min. Line width:0.015mm 5.Wavelength:1064mm 6.Max.Laser average power:50w 7.Beam quality m2:
RF tube installed. CO2 laser wavelength 10600nm, Guide beam - red, Articulated arm, Scanner for fractional treatment, Focal hand piece for cutting, vaporization and coagulation, Optional vaginal hand piece for vaginal tightening and SUI therapy 60Kg
1. High accuracy--hiwin/pmi linear guide rail from taiwan. 2. Beijing reci laser tube and power supply, long life, perfect cutting/engraving effect and strong power. 3. Four kinds of table: motorized up/down flatbed table, fixed honeycomb table, fixed flatbed table & fixed knife table. 4. Online & offline operation: to transmit data from pc to machine by usb cable or transmit by flash memory disk. 5. High rigidity--the thickness of the machine body is 2.0mm, the shape will not change within 30 months. 6. Usb 2.0 interface, steady and quick transmitting speed, suitable for desktop pc or laptop. 7. Three kinds of software to output data: lasercutengrave, autocad and coreldraw. 8. Dsp control system. 9. Massive memory capacity: standard allocation of 128mb inner memory capacity. 10. Large-size machine can adopt two laser tubes to raise efficiency. 11. Ce certificate, iso9001: 2008, fda. 12. High cutting/engraving speed with servo motor from mitsubishi/panasonic in japan--optional. Package:standard exporting package, plywood pallet Package size:1730mm*1450mm*1400mm Gross weight:470kg