Fil is a suspended luminaire composed of metal frame and cotton thread. The frame also houses a filament bulb inside. The luminaire is available in three sizes of 400mm, 600mm and 800mm in diameter. Cotton threads are availabe in different colors based on RAL color standards. Electrical Input Voltage 230 - 240 AC 50Hz Control Switch Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Metal frame & thread Environment Indoor Mounting Suspended Light Distribution Direct Body Finish Cotton Thread Thermal Management Passive Cooling Light Source Lamp Filament Bulb Color Temperature 3000K / 6500K Size And Wattage - 400-10W 600-15W 800-15W
Zile is a suspended luminaire made of jute. Available in sizes of 450mm, 600mm and 900mm in diameter respectively. LED bulb is used as light source Electrical Input Voltage 220 - 240 AC 50Hz Driver Type Control Switch Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Metal Frame Environment Indoor Mounting Pendant Light Distribution Direct Body Finish Jute Finish Light Source LED LED Bulb CCT 3000K / 4000K / 6500K Size And Wattage - 450-9W 600-12W 900-15W
Welle is a Wicker weaved hand made luminaire suspended from the ceiling with LED bulb as the light source. Available in single size of 500mm in diameter. The luminaire is light weight due to its material property. Electrical Input Voltage 220 - 240 AC 50Hz Control Switch Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Wicker Environment Indoor Mounting Pendant Light Distribution Direct Body Finish Wicker weave Thermal Management Passive Cooling Light Source LED LED Bulb CCT 3000K / 4000K / 6500K Size And Wattage - 500-10W
LIFA has a spun aluminium body that is topped with a wood structure to enhance the luminaire's appearance and is connected to the suspension cable. As an illuminator, either a lamp or an LED module is used. A single-sized fixture with a diameter of 350 mm and a height of 170 mm is available. Custom paint and powder-coat options based on RAL are available. Electrical Input Voltage : 220 - 240 AC 50Hz Control : Switch Connection : Plug-in Type Pre-wired General Characteristics Appliance Class : Class 2 Ingress Protection : IP40 Photobiological Safety : RG 0 - No Risk Ambient Temperature : 0 to +50 C Luminaire Housing Material : Spun Aluminium Environment : Indoor Mounting : Ceiling Suspended Light Distribution : Direct Body Finish : Powder Coated Thermal Management : Passive Cooling Light Source LED : LED Bulb Color Temperature : 3000K / 4000K / 6500K Size And Wattge - 350-10W
The ORA family of luminaire has a spun aluminium body that is sleek. Each fixture has a distinct shape and size. The fixture houses an illuminator, which can be either an LED module or a lamp. The body can be powder-coated or painted in a variety of RAL colours. Electrical Input Voltage : 180 - 280 AC 50Hz Driver Type : Constant Current Driver Control : Switch / DALI / Analog Connection : Plug-in Type Pre-wired General Characteristics Appliance Class : Class 2 Ingress Protection : IP40 Photobiological Safety : RG 0 - No Risk Ambient Temperature : 0 to +50C Light Source : LED Medium Power LED Binning : 3 Step MacAdam Luminous Efficacy : 95 Lm/W Color Temperature : 2700K / 3000K / 4000K / 5700K / 6500K CRI : 80 (Standard) 90 (Optional) Tunable LED (Optional) UGR : 50,000 hours Size And Wattage - 200-15W
Sub is a suspended luminaire made of cork material with Bulb. Available in three sizes of 200mm, 300mm and 400mm in diameter. The cork material gives a natural element to your interior. Options available on LED module and bulb as per requirement. Electrical Input Voltage : 220 - 240 AC 50Hz Control : Switch Connection : Plug-in Type Pre-wired General Characteristics Appliance Class : Class 2 Ingress Protection : IP40 Photobiological Safety : RG 0 - No Risk Ambient Temperature : 0 to +50 C Luminaire Housing Material : Cork Environment : Indoor Mounting : Pendant Light Distribution : Direct Body Finish : Cork Finish Thermal Management : Passive Cooling Light Source LED : LED Bulb CCT : 3000K / 4000K / 6500K Size And Wattage - 200-10W 300-10W 400-12W
Sub is a suspended luminaire made of cork material with Bulb. Available in three sizes of 200mm, 300mm and 400mm in diameter. The cork material gives a natural element to your interior. Options available on LED module and bulb as per requirement. Electrical Input Voltage 220 - 240 AC 50Hz Control Switch Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Cork Environment Indoor Mounting Pendant Light Distribution Direct Body Finish Cork Finish Thermal Management Passive Cooling Light Source LED LED Bulb CCT 3000K / 4000K / 6500K Size And Wattage - 200-10W 300-10W 400-12W
Hol is a wall mounted cork luminaire which consists of a cork housing and wall mounted assembly. It can also be tilted as required and also houses an LED bulb. Fixture can also be suspendede which makes it a pendant luminaire. Available in a single size of 130mm diameter. Electrical Input Voltage 220 - 240 AC 50Hz Control Switch Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Cork Environment Indoor Mounting Pendant / Wall Mounted Light Distribution Direct Body Finish Cork Finish Thermal Management Passive Cooling Light Source LED LED Bulb CCT 3000K / 4000K / 6500K Size And Wattage - 130-10W
Round Cork dome luminaire suspended from the ceiling using cable, available in sizes of 200mm, 300mm and 400mm diameter. It comes with single option of bulb as light source Electrical Input Voltage 220 - 240 AC 50Hz Control Switch Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Cork Environment Indoor Mounting Suspended Light Distribution Direct Body Finish Cork Finish Thermal Management Passive Cooling Light Source LED LED Bulb CCT 3000K / 4000K / 6500K Size And Wattage - 200-10W 300-10W 400-15W
Maxi is a suspended luminaire with a flat conical shape available in sizes of 300mm and 400mm diameters. The liminaire comes with the options of LED module and LED bulb. It is suspended using driver mounted canopy cup and cables. Electrical Input Voltage 220 - 240 AC 50Hz Control Switch Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Cork Environment Indoor Mounting Pendant Light Distribution Direct Body Finish Cork Finish Thermal Management Passive Cooling Light Source LED LED Bulb CCT 3000K / 4000K / 6500K Size And Wattage - 300-10W 400-15W
Atten AT-A822D / AT-A860D Heat Gun with variable temperature and two stage air flow. Microprocessor controlled heat gun with continuously variable temperature from 100C - 590C (200F - 1100F). Atten AT-A822D / AT-A860D heat gun is regulated by a variable control at the top left of the handle. An air flow volume of 250L - 500L/Min. Atten AT-A822D / AT-A860D is regulated by a three stage switch at the trigger position (High-Low-Off). Specification: Power source: 220V-240V 50/60Hz Output power: 1600W / 2000W Temperature range: 100C-590C/100C-650C Air flow grades: 250L/mi, 500 L/min Features: 2 grades of air flow, digital display of temperatures, adjustable temperatures.
Redundant Dual Rate Transponder 10 Gbps Repeater/Converter/Transponder This transponder is a 10G fiber to fiber 3R converter repeater and transponder. This transponder supports SFP+ to SFP+ or XFP to XFP fiber connections. 1+1 Automatic optical line Protection Switching is supported for the Line ports. The transponder is protocol transparent, providing 3R (Re-amplification, Re-shaping and Re-clocking) between these different optical module types. The modules enable an extremely wide range of optical infrastructure solutions including media conversion, signal repeating, lambda conversion, and Wave Division Multiplexing(WDM). Especially suitable for DWDM ring network protection. The redundant multi-rate dual transponder fit HT6000 Series CH04, CH08, CH20 Chassis.
Traditional OLP protection requires four valuable core resources. However, in many places, due to insufficient fiber resources, it is impossible to provide excess fiber resources and optical line redundancy protection. Can we use OLP in single fiber solution In view of the shortage of optical fiber resources and need to optical line redundancy protection, our company has developed BIDI OLP equipment to solve the problem of optical line protection in the case of insufficient optical cable resources. OLP-BIDI only needs two fibers to realize the optical line protection function. When the main circuit fiber fails, the receiving end automatically switches to the standby fiber receiving, ensuring communication without blocking operation, improving communication system stability and reliability. It also saves fiber resources.
1. Android 11 operating system with optional Windows 10; 2. RAM 4GB DDR4+ROM 32GB/ RAM 8GB DDR4+ROM 128GB; 3. With UHD resolution 3840*2160; 4. Free and various wallpaper switch; 5. Multi-languages, like English, Russian, French, Italian, Japanese, German; 6. 9 splits multi-screen sharing from tablet, smartphone, laptop; 7. Speakers with professional Triple-section (Treble, Mid, Bass) Crossover function with 40W; 8. Zero/Optical Bonding Technology with 20 touch points; 9. Built-in AI facing tracking camera and 6 array microphone is available; 10. QIAOTOU appearance design, which combines Chinese traditional culture with modern ergonomics
Model HYPERION Integrated Solar Street Lights is a project type lighting requirement base designed powerful integrated solar street light. Classic integrated ( All in One ) design, with upgraded lithium iron phosphate (LiFePO4) battery pack, not only increase cycle time, but highly prolonged the light's working time, multiple lighting modes can be easily switched for different scenarios by remote. Its general advantages as followings: Â High-efficiency Mono Solar Panel; Durable Aluminum Lamp Housing; High Brightness Optical Lens LED Light Source; Lumen efficacy of LED High Energy Density, Non-flammable, Non-explosive; Latest 4th Generation MPPT Controller; Group Street Lights Control, ZigBee Communication.
Buy the best Gas Cooktops online at Kutchina which comes in a wide range of sizes, and allows for a wide range of kitchen layouts. A gas cooktop is the most prevalent kind of cooktop. From their gas hob tops, food is cooked over an open flame. Gas stoves heat up quickly and smoothly, allowing you to quickly switch from high to low heat. The flame also aids in determining the temperature. Food does not get caught underneath the sealed gas hob burners, making cleanup easy. Heavy pots and pans slide over the continuous grates with ease. To prevent gas leaks, look for a cooktop gas stove that has an automatic re-ignition and shut-off. Downdraft functions are available on certain gas cooktops, sucking smoke and odours out of the kitchen. Downdraft cooktops eliminate the need for a ventilation hood, making them suitable for island chimneys.
QIANLI MEGA-IDEA iCharger battery activation detection board with real-time display for Phone 6 to Phone 13 Pro Max Android Phones. MEGA-IDEA iCharger 3.0 battery activation board current voltage detection tool for Phone Operation Steps: Power on: You can use type-c or alligator clip to power on (USB only works as output). After power on, the blue indicator light on the upper left will be on. Connect the battery: Find the corresponding models position to connect. One-click activation: Just click the activation button, and it will switch to automatic quick charge after activation. Automatic power off: The battery will automatically cut off after being fully charged, and the indicator light will turn blue. Product Features: One-click activation Non breaking cable Support mainstream models Automatic fast charging Real time current and voltage Multiple power supply modes Automatic recognition
UC1 Universal Converter UC1 is a universal input converter or isolator which include input signal 0(4) 20mA, 0 10V, Thermocouple, RTD, etc. Base on measuring signal needed, parameters can be set via panel button with LCD display. Programmable unit without need of hardware modification or jumper wire/ Dip-Switch. UC1 offer 3 kind of output option, analogue output or Relay 2 or RS485(Modbus RTU). With universal input range and different output function, it help reduce product inventory. Parameters can be easily set via button on site or by software provided through communication port. Features Programmable input signal Programmable analogue output LCD on unit for easy setting Pluggable terminal for easy wiring Isolation between input, output and power
38MP HDMI VGA digital microscope for electronic pcb soldering repair,130X C mounting lens + 38MP microscope camera + USB LED Ring Light + Camera holder. 130X Type C mounting lens Working distance: 50 155mm zoom c-mount Lens Magnification Power by 0X~130X Size: 115mm(L) 40mm(DIA) 56 LED Adjustable Compact Microscope Ring Light: Provides intense and focused shadow-free illumination 56Lighting direction changeable Variable intensity control Intense and focused shadow-free illumination 100,000 hours of life Power input: 100-240V, 50-60HZ, auto switching Inside diameter of the ring light: 1.0 (27mm) Overall outside diameter: 1.77 (45mm)
1. Real time monitor single wrist strap grounding function 2. Monitor has OFF function, dial switch to ON, red light illuminate and monitor will turn green while connect wrist strap 3. Plug wrist strap into monitor socket, monitor will alarm when wear wrist strap abnormally 4. Monitor will alarm when wrist strap is in open circuit or poor contact. 5. Monitor will alarm when grounding cord is in open circuit accidentally 6. Monitor 1 single wrist strap and itself grounding cord 7. Wrist strap alarm limit: 1.2 M ( factory preset ) 8. Accuracy: 10% 9. When monitor alarm, red LED light flashes and also comes with buzzer sounds. 10. Suitable for any kind of single wrist strap 11. Beautiful appearance, strong anti-interference ability