VN1-40.5E medium-voltage AC vacuum circuit breaker is a new product designed by our company. The main circuit is with the solid insulated structure and uses the advanced epoxy resin sealed technology. Firstly it assembles a integrated sealed pole column with the vacuum interrupter, the main circuit, the insulated support and so on, which enhances the environment endurance of the vacuum circuit breaker. 1. The main circuit section and operating mechanism section is upper and lower arrangement, which optimize the electric field distribution, increase the insulated reliability, also reduce the circuit breaker depth direction size and reduce the matched switchgear depth greatly. 2. The live part of main circuit is cast in the epoxy resin cylinder, which make the interrupter be exempt from the environmental effect and the external mechanical force injury, also cause the circuit breaker no arc-over between phases and on the interrupter's surface and enhance the insulation of circuit breaker. 3.Current carries are fixed reliably in the position by the epoxy resin, do not need the extra fastener, reduce the number of accessories used for assembling circuit breaker pole columns, reduce the installation error and enhance the reliability of installing the circuit breaker. 4. As a result of using the sealed technology, the circuit breaker volume reduces greatly. The matched cabinet width is only 1200mm, heighten 2400mm, depth 2600mm. 5. The VN1 circuit breaker is based on the self-supporting structure of bottom plate, has overcome the primary contacts linking due to the circuit breaker submersion and also transport conveniently.
Mini circuit breaker Mcbis used in lighting distribution system or motor distridution system for protectiong overload and short-circuit in the system.
HKKW2 Series of intelligent frame circuit breakers HKKW2 Series of intelligent universal circuit breaker is mainly used in AC. 50Hz, rated voltage of 400V(380V)íó690V(660V) and rated current between 630A-6300A power distributing work-net to distribute Elec. power and protect equipments from being damaged by over-load, short-circuit, under voltage and grounding fault, having many protective functions and ability of realizing accuracy protective action in selectivity, improving reliability and quality of supplying Elec. power. The breaker is widely used in modern Elec. power distributing network.
Mainly used in the low voltage distribution switchboard to control and protect power distribution systerm. Its technical index reaches the international advanced standard of that kind of products in 1990s and conforms to criteria for low voltage breaker in iec60947-2
DZ47-63 (C45) series Miniature Circuit breakers(MCBs) is used in lighting distribution system or motor distribution system for protecting overload and short -circuit in the system.The product is novel in structure, light in weight, reliable and excellent in performance. It has high breaking capacity, can trip quickly and it's installation uses with guide, it's case and items are adopted with high fire resistant and shock proof plastics. The product, with long life, is mainly used in AC 50 HZ/60 HZ. Specifications: 1.Rated volatge: 240V/415V AC 2. Rated current (C):1, 3, 5, 6,10, 15, 16,20, 25,32,40,50,60,63A (D): 1, 3, 5, 6,10, 15, 16,20, 25,32,40A 3. Electric endurance not lower than 6000 times 4. Mechnical endurance not lower than 2000 times. 5. Poles : 1, 2, 3, 4. Trademark: Meba Model: DZ47-63 carton
Mini circuit breaker Gkd-65 midget circuit breaker is mainly suitable for overload and short circuit of Distribute circuit and equipment within the circuit of ac50hz, rated voltage up to 400v, Current up to 63a. It can also be used for an unfrequent switchover of the circuit. Main technical parameter: 1. Feature of over current tripper 2. When the ambient temperature is 30¦--35¦, the over-current tripper feature should In line with the characteristic of table 1. 3. Breaking capacity: complies with standard of ie60898, gb10963 and gb 10000a.
Mini circuit breaker(dpn) Gkd-32 is mainly suitable for overload and short circuit protection Within the circuit of ac 50/60 hz, rated voltage of single pole 250v or down The item is the idealest distribution protective switch in the civil residence field At present. This product conforms to the requirement of iec60898 and gb10963 standard.
Me universal circuit breaker ME series low voltage universal circuit breakers are suitable for the distribution circuits with AC 50Hz, voltage 380V & 660V, current up to 5000A, used as distributing electric energy and protecting circuit and electrical equipment against the overload, voltage drops and short circuit. It also can be used as unfrequent changeover of circuit under normal conditions. The circuit breaker less than 1250A can be used as protecting motor against overload short circuit in circuit with AC 50Hz voltage 380V and as unfrequent starting motor under normal conditions.
Bhd6 mini circuit breaker BH-D6 mini circuit breaker is mainly suitable for overload and short circuit protection. It can also be used for an unfrequently switchover of the circuit and illumination under normal conditions.
C45n mini circuit breaker
C45n series circuit breaker is used in lighting distribution system or motor distribution system for protecting overload and short-circuit in the system. The product is novel in structure, light in weight, reliable and excellent in performance. Its frame and parts adopt plastics of high fire-resistant and shock- proof. The product, with long life, is mainly used in ac 50hz/60hz single-pole 240v or two, three, four- pole 415v circuit for overload and short-circuit prot- ection as well as for unfrequent on-and-off switching electric equipment and lighting circuit in normal case. The products comply with iec 898 & bs 3871.
Mini circuit breaker (1)inb2 (dz47) high-breaking mini circuit breaker The product is mainly used in ac 50/60hz. Voltage up to 400v circuit for overload and short-circuit protection as well as for unfrequent on-and off switching electric equipment and lighting circuit in normal case. The items comply with iec 60898&gb 10963. Rated voltage: 230v, 230/400, 400 v Pole number: 1, 2 ; 1, 2 ; 2, 3, 4 Rated current: 6, 10, 16, 20, 25, 32, 40, 50, 63 a (2)inb1-63 mini circuit breaker The items comply with iec 60898&gb 10963. It is mainly used for overload and short circuit protection in the circuit of ac 50/60hz, rated voltage of single pole up to 230v, two, three or four pole up to 400v. It can also be used for infrequent switch over of the circuit and illumination under normal conditions. (3)inb2-32 mini circuit breaker The items are used in ac 50hz or 60hz, 230v single phase dwelling house circuit for overload and short-circuit protection. The nature wire and live wire can be cut off synchronously to protect the life and avoid the fire. The items comply with iec60898&gb10963. Connection: rigid conductor 16mm2 Flexible conductor 10mm2 Rated voltage: 230v Pole number: 1p+n Rated current: 6, 10, 16, 20, 25, 32 a Breaking capacity: 4500a (4)bh(dz12-63) series mini circuit breaker The items are used in ac circuits 50hz forprotection of overload, short circuit and for circuit change-over in lighting system. Pole number: 1p 2p 3p Rated current: 6, 10, 16, 20, 32, 40, 50, 63 a Rated voltage: ac 120/230, 230/400 v Zhejiang inte industrial electric co., ltd. Was founded in 1984 and is iso 9001: 2000 certified. We mainly manufacture circuit breaker, thermal protector, thermostat and counter etc. Electrical and electronic equipments. Some of our products have got ccc, ul, vde, ce, saso approval. Leave factory packing
Ccb531n circuit breaker Vde approval circuit breaker Manufactured according to iec/en60898, gb10693. Pole:1p-n Rated voltage:230v~ Rated current:6, 10, 16, 20, 25, 32a Tripping characteristic: "b" "c" Breaking capacity: 6ka/ class3 12pcs/box. 120pcs/carton.
Pole number: 1,2,3P Rated voltage: 120/240V Rated current: 10,15,20,25,30,40,50,60A Interrupting Capability: 10KA Standard: US standard
Earth leakage circuit breaker The elcb is micro controller based with shock guard which continuously displays all the parameters and with inbuilt seven segment display and indicates the reason for tripping. Dimensions 17.5x13.5x8 cm Weight 1.5kg approx
Vacuum circuit breaker Our products are inexpensive and have super quality. All products have passed the iso9001 international quality certification, some model passed europe certificate for e-mark.. We can provide all sorts of products with advantage in technology, quality and cost.
DC voltage: 2/20/200/1, 000V AC voltage: 2/20/200/700 DC current: 200ma to 20A AC current: 200ma to 20A Resistance: 200/2/20/200k/20/20m/200mω Capacitance: 20nf/2/200uf Temperature: -40 to 400/400 to 1, 000 Dwell: 3/4/5/6/8cyl Tach: 3/4/5/6/8cyl Diode test: Yes Hfe test: Yes Continuity: Yes Duty holds: Yes Date holds: Yes Backlight: Yes Maximum display: 1999 General character: Meter color: Ron-grey+ red Meter weight: 445g Size: 205 x 100 x 60mm Standard accessories: Test lead, battery, manual Standard inner packing: Color box Standard packing quantity: 30 Outer packing size: 470 x 370 x 480mm Standard CTN gross weight: 25.5kg. 30 per carton Outer packing size: 470*370*480mm Gw:24.5kg.
Description IC REG CTRLR DDR 2OUT 20WQFN Manufacturer Standard Lead Time 12 Weeks Detailed Description D-CAP Controller, DDR Voltage Regulator IC 2 Output 20-WQFN (3x3)
Description IC GATE AND 1CH 2-INP 5TSSOP Detailed Description AND Gate IC 1 Channel 5-TSSOP
Application Applies to best parameters determination of heat sealability of various kinds of film. Heat sealability of film depends on temperature, pressure and heat time and the HSL-6001 Heat Seal Tester is widely used in food and pharmaceutical packaging industries. Features 1: Our own patent technology 2: Embedded system control 3: Touch screen operation, easy to operate 4: TFT LCD display, UI flattening design 5: Dual heat jaws, temperature controlled independently 6: Micro-printer prints mini-report 7: Pressure easy to adjust, heat temperature and time touch screen input. 8: Emergency stop button, safety design to prevent burns 9: Over temperature protection, over pressure protection 10: Silence working 11: DB9 RS232 communication port. 12: DSM system is optional(Laboratory Management Information System), easy to manage and share test data. Technical Indexes Heat temperature: Room temperature+6 ~ 300â?? Accuracy: ±0.2 â?? Dell time: 0.1~ 999.9s Pressure: 0.05 MPa~1.1MPa Heat jaw surface: 265mm ? 12 mm (customized) Heat jaws: 2, controlled independently Gas source pressure: 0.05MPa ~ 1.1MPa (self-provide) Gas source interface: Ф6mm Outer dimension: 536 mm (L)?335 mm (W)?413 mm (H) Work noise: 0db Power supply: AC 220V 50Hz Net weight: 33kg Standards QB/T 2358(ZBY 28004)?�ASTM F2029?�YBB 00122003 Configuration Delivery: main unit, micro-printer, footswitch, sample feeding rod. Optional: Communication cable, DSM system -