Heavy duty white (only) plastic and chromium or nickel plated hanging rod. 30 cm of hanging: Hanging weight limit of 23kilos. 15 units per carton.weight: 9.2kilo Not bar coded. Individual units factory packed in cardboard boxes 48cm x 8.5cm x 5cm. Packed unit weight 605gm per piece.
This flashlight is produced from metal material and electroplated plastic.It can project shadow on LOGO and use 4 AG3 battery to supply power.The charge capacity is great and the usage period is long.Thin sand chromium provides metal texture for surface--the surface color can be chosen.Project sources is extremely high and bright LED, which makes the LOGO projection come out more perfect and clearer.It can attain a 5 Ms above projection at dark place and the projection will be clearest when the distance is 1-4Ms.
Shandong Huamin Steel Ball Joint-stock Co.,Ltd(Shandong Huamin Casting and Forging Joint-stock Co.,Ltd) is one of the largest manufacturers and exporters for grinding steel ball and rod mill in China, the annual production output is 200,000 metric tons. Our products are mainly exported to USA, Canada, Chile, South Africa, Italy, Greece, Korea and Japan more than 30 countries and regions in the world. Product Description Our cast iron grinding balls can be divided into three categories including the high chromium type, medium chromium type and the low chromium type. The Quality Index of the High Chromium Type The chromium content of the high chromium type product is greater than or equal to 10.0%. And the carbon content is between 1.8% and 3.20%. It is required by the national standard that the hardness of the high chromium type product must be no less than 58HRC, and that the impact value should be greater than or equal to 3.0 J/cm2. This type of product must go through the hot quenching and the tempering treatment to come up to the hardness. Currently in China, there are two quenching methods for this type of product including oil quenching and wind quenching. If the tested hardness of this type of product is below 54HRC, then it shows that the quenching treatment is omitted. Testing Our lab is equipped with advanced testing machine to strictly control the quality of the product. Packaging Barrel with wooden pallet: Steel Drum or Steel Barrel Two Barrel tie on the wooden pallet, steel tape for bundle Strong Nylon Bag: Avalible Bag: 50kgs; 100kgs; 1000kgs Certifications Our company has obtained ISO 9001 International Quality System Authentication, ISO14001 Environmental System Management Authentication and ISO18001 occupational health and safety certification, safety standardization identification, clean production enterprise certification. �?� We welcome customers both at home and abroad to come to negotiate business with us, we sincerely promise you. We are trying our best to supply you with high quality products, reasonable price, timely delivery with satisfactory service as the basis of our long-term cooperation. �?� Insisting on the theory of "Credit Goal, Quality Life, Market First, Customer God", our company is establishing the largest professional producing and exporting base in China, which include grinding steel balls and rod mill products. "Winning on quality, making up to the world" is our eternal promise.
Shandong Huamin Steel Ball Joint-stock Co.,Ltd(Shandong Huamin Casting and Forging Joint-stock Co.,Ltd) is one of the largest manufacturers and exporters for grinding steel ball and rod mill in China, the annual production output is 200,000 metric tons. Our products are mainly exported to USA, Canada, Chile, South Africa, Italy, Greece, Korea and Japan more than 30 countries and regions in the world. Product Description Our cast iron grinding balls can be divided into three categories including the high chromium type, medium chromium type and the low chromium type. The Quality Index of the High Chromium Type The chromium content of the high chromium type product is greater than or equal to 10.0%. And the carbon content is between 1.8% and 3.20%. It is required by the national standard that the hardness of the high chromium type product must be no less than 58HRC, and that the impact value should be greater than or equal to 3.0 J/cm2. This type of product must go through the hot quenching and the tempering treatment to come up to the hardness. Currently, in China, there are two quenching methods for this type of product including oil quenching and wind quenching. If the tested hardness of this type of product is below 54HRC, then it shows that the quenching treatment is omitted. Testing Our lab is equipped with an advanced testing machine to strictly control the quality of the product. Packaging Barrel with wooden pallet: Steel Drum or Steel Barrel Barrel size(cm): 89 - 58 (Volume: 800kgs N. G. Available) Pallet size(cm): 168 - 59 13 Two Barrel tie on the wooden pallet, steel tape for bundle Strong Nylon Bag: Avalible Bag: 50kgs; 100kgs; 1000kgs Certifications Our company has obtained ISO 9001 International Quality System Authentication, ISO14001 Environmental System Management Authentication and ISO18001 occupational health and safety certification, safety standardization identification, clean production enterprise certification. We welcome customers both at home and abroad to come to negotiate business with us, we sincerely promise you. We are trying our best to supply you with high quality products, reasonable price, timely delivery with satisfactory service as the basis of our long-term cooperation. Insisting on the theory of "Credit Goal, Quality Life, Market First, Customer God", our company is establishing the largest professional producing and exporting base in China, which include grinding steel balls and rod mill products. "Winning on quality, making up to the world" is our eternal promise
Inconel 600 is a nickel-chromium alloy with good oxidation resistance at higher temperatures, with good resistance in carburizing and chloride containing environments. Alloy 600 is a nickel-chromium alloy designed for use from cryogenic to elevated temperatures in the range of 1093. The high nickel content of the alloy enables it to retain considerable resistance under reducing conditions and makes it resistant to corrosion by a number of organic and inorganic compounds. The nickel content gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Its chromium content gives the alloy resistance to sulfur compounds and various oxidizing environments. The chromium content of the alloy makes it superior to commercially pure nickel under oxidizing conditions. In strong oxidizing solutions like hot, concentrated nitric acid, 600 has poor resistance. Alloy 600 is relatively un-attacked by the majority of neutral and alkaline salt solutions and is used in some caustic environments. The alloy resists steam and mixtures of steam, air and carbon dioxide. Alloy 600 is non-magnetic, has excellent mechanical properties and a combination of high strength and good workability and is readily weldable. Inconel 600 exhibits cold forming characteristics normally associated with chromium-nickel stainless steels. Typical corrosion applications include titanium dioxide production (chloride route), perchlorethylene syntheses, vinyl chloride monomer (VCM), and magnesium chloride. Alloy 600 is used in chemical and food processing, heat treating, phenol condensers, soap manufacture, vegetable and fatty acid vessels and many more.
Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel
BLOW BAR FOR IMPACT CRUSHER Material : 18Cr up to 26Cr | 18Mn2Cr up to 22MnCr3 We know that the impact crusher wear parts mainly include the blow bar, breaker plate and side liners, We manufacture the blow bar, breaker plate and side liner according to the customers request, chromium or manganese steel, Every products in GUBT is tested under a wide range of load conditions. The special processing techniques ensure that our products have leading performance. High-chromium is the first choice for blow bar , which is longer than traditional high manganese plate hammer of life, reduce maintenance time and improve your productivity. Usually one set of blow bars include 4 or 8 blow bar. Like blow bar , we mainly use hi/chromium as the first choice on break plates .
Stainless steel scrap in 300 series such as: 304, 304l, 309, 310, 316, 316l, 321 etc. duplex steel scrap duplex 2304, duplex 2205, super duplex 2507(uns 32750), zeron 100 (uns 32760)etc. high nickel alloy scrap such as inconel 600, 601, 625, 713, 718, 800, 825, 904l, monel 400 / k500, hastelloy c 22 / 276, smo 254, alloy 20, nickel & chromium such as ni:35% cr:25%, ni chrome scrap 80/20, nimonic 80 scrap etc. pure metal such as pure nickel, pure molly, pure tungsten, pure niobium etc. cobalt base alloys scrap such as sh 4, sh 6, sh 12, sh 21, sh 25, sh 31, sh 605, f 75, fsx 414, etc..
Rock phosphate (rp), powder calcium carbonates, talc powder, powder kaolin, silica sand, potash feldspar and fluorspars (fluorite), iron oxides ( hematite), deicing salt, quartz, bentonite, dolomite, ilmenite, barite, chromium oxide, zinc oxide (ore, dust), phosphoric acid, potassium sulphate (sop), sulfur, single super phosphate fertilizer, triple super phosphate fertilizer, granular rock phosphate, gypsum fertilizer, granular urea fertilizer, granular dap fertilizer, onion, garlic, banana, potatoes, white kidney beans, sweet pepper, cucumber, iceberg lettuce, orange, mandarin, grapes, peach, strawberry, watermelon, pomegranates, guava, plum, alfa alfa, dcp, wheat bran, chicken feed, rabbit feed, sugar beet pulp pellets, cows / buffalo feed, urea, map, dap, ammonium nitrate, ammonium sulphate, sop, mop, npk.
Belt conveyors, screw conveyors, slat conveyors, roller conveyos, telescopic conveyors, over head conveyors, assembly line conveyors, lorry loaders, stacker conveyors, portable conveyors, chain conveyors, apron conveyors, bucket elevators, chain elevators, goods lifts, scissor lifts, sand mixers, sand mullers, intensive mixers, core sand mixers, shakeout machines, knockout machines, lip pouring ladles, teaspout ladles, bottom pouring ladles, treatment ladles, swing frame grinders, pedestal grinders, sand dryers, rotary dryers, shot blasting machines, tumbling barrels, automated electro plating plant for zinc, phospating, nickel, chromium, copper, tin and gold, manual plating plants, plating filters, plating barrels, plating rectifiers etc.
number:SS-COIL specifications:Thickness 0.025-4mm classification:Stainless steel coil introduce:Stainless steel coil material grade: 201, 202, 301,302,303,304,309S, 410S, 430, 316, 316L 1:Product description Standard: ASTM A240, JIS G4304, etc. Material grade: 200&300&400series Surface finish: 2B, BA, Mirror finished, N04, Hair Line, Matt finished, 6K, 8K Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless alloy. It was developed mid century to conserve nickel and it is used as an alternative to type 301 in some tempered applications. Because of 201â??s relatively high yield strength in the annealed condition, use of 201 is limited. Type 201 is generally used in the tempered condition particularly for springs and fasteners. 201 Stainless will retain a comparable ductility to 301 even with the higher yield strength. Alloy 204CU is a chromium-magnesium austenitic stainless steel with an addition of 2-4% copper and nitrogen of 0.05-0.25%. Due to the addition of copper the alloy has better formability than 201 and 304. The copper improves corrosion and resistance to stress corrosion cracking in certain media. 204CU bridges the cost-property gap between 200 and 300 series stainless. Alloy 204CU is slightly after cold working but can be minimized. Type 301 is an austenitic stainless steel capable of attaining high strengths and ductility by cold working. It is not hardenable by heat treatment. Type 301 is non-magnetic in the annealed condition and becomes increasingly magnetic with cold working. It is preferable over types 302 and 304 in the tempered condition because the higher elongations (which are attainable at a given strength level) facilitate fabrication. Type 302 is not hardenable by heat treatment and in non-magnetic in the annealed condition. It becomes increasingly magnetic with cold working. If carbide precipitation is an issue 304 may be a better choice with its lower carbon content.
Conveyor belt are used as components in automated distribution and warehousing. In combination with computer controlled pallet handling equipment this allows for more efficient retail, wholesale, and manufacturing, distribution. It is considered a labor saving system that allows large volumes to move rapidly through a process, allowing companies to ship or receive higher volumes with smaller storage space and with less labor expensive cost. Material of conveyor belt: 1) stainless steel wire. 2) carbon steel wire, galvanized wire. 3) nickel chromium wire, chromium aluminum wire. Characteristics: 1)the product has the characteristics of good conveying function,anti-break and oxidization 2)high cold and hot expansion,even mesh opening and thickness. 3)steady running without deflection. Application of conveyor belt: 1)the product is mainly used in roasting foodstuff,industrial heat treatment, 2)chemical industry,pharmacy,glass and ceramics making, 3)Petroleum, metallurgy, food processing machinery, etc.
The resistance of air, steam, water and other corrosive medium and weak acid, alkali, salt and other chemical etching medium corrosion of steel. Also known as stainless acid-resisting steel. In practical applications, often weak corrosion resistant steel, stainless steel, the corrosion of the steel is called acid-resisting steel. Due to differences in the chemical composition of the two, the former is not resistant to chemical corrosion, and the latter is normally has no rust. The corrosion resistance of stainless steel alloy elements on the contained in steel. Chrome is made of stainless steel corrosion resistance for the basic elements, when the cr content in steel is 1.2% or so, oxygen effect of chromium and corrosive medium, the formation of a thin layer of oxide film on the steel surface (since the passivation film), the matrix can prevent further corrosion of steel. In addition to chromium, common alloying elements are nickel, molybdenum, titanium, niobium, copper, nitrogen and so on, to meet a variety of uses and properties of stainless steel requirements. Thickness of c, width of 1.6-850 mm Carton package standard export package
INCOLOY alloy 925 (UNS N09925) is an age-hardenable nickel-iron-chromium alloy with additions of molybdenum, copper, titanium and aluminum. The alloys chemical composition, listed in Table 1, is designed to provide a combination of high strength and excellent corrosion resistance. The nickel content is sufficient for protection against chloride-ion stress corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing chemicals. The molybdenum aids resistance to pitting and crevice corrosion. The alloys chromium content provides resistance to oxidizing environments. The titanium and aluminum additions cause a strengthening reaction during heat treatment. INCOLOY alloy 925 is used in various applications requiring a combination of high strength and corrosion resistance. Because of the alloys resistance to sulfide stress cracking and tress-corrosion cracking in ¡°sour¡± (H2S containing) crude oil and natural gas, it is used for down-hole and surface gas well components including tubular products, valves, hangers, landing nipples, tool joints and packers. The alloys is also useful for fasteners, marine and pump shafting and high-strength piping systems.
We undertake kinds of rolling equipment, electric arc furnace, refining furnace and all kinds of continuous casting mill. The model we can produce is as below: Hot mill (medium-plate mill, sheet stripe mill) cold rolled mill, kinds of high frequency welded pipe machine, channel steel, H-section, Angle, I-beam, deformed bar, wire rod and all kinds of high-tech mill. The machining workshop, rivet welding workshop, casting / forging workshop and other branch factories what affiliated to our company can process kinds of work-pieces and equipments. For rolls, there are plate rolling mill roll, Section rolling mill roll, building material rolling mill roll and various shafts. Furthermore, we can produce reduction box, connection machine, universal joint, through water cooling, plate bending rolls, trimming shears, lath cutter, flattening machine and so on. The material of work-piece is: cast iron, high manganese, low alloy, high chromium-alloy, low chromium-alloy infinite chilling etc. 1. Smelting furnace Electric arc furnace;intermediate frequency induction furnace;refining furnace. 2. Kinds of furnace for heat treatment furnaces. 3. Continuous casting machine R4M, R6M 4. Steel rolling production line.
Wire materials: type 304, type 304 l, type 316 and type 316 l. Type 304 often refers to as "18-8" (18% chromium, 8% nickel ). T-304 is the basic stainless alloy mostly commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 degrees fahrenheit. Type 304 l is very similar to t-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics. Type 316: stabilized by the addition of 2% molybdenum, t-316 is an "18-8" alloy. Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulfur-bearing water or halogen salts, such as chlorides are present. Type 316 l: type 316 l is very similar to t-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics Bases to your request
1,Tabletted additives for alloying aluminum have been in use for recent decades.These tablets(also named alloy compact)can be used as master alloys to produce aluminum alloys.They provide an efficient and economic way of making elemental additions such as titanium,iron.manganese,chromium,zinc,nickel and copper in casthouses world-wide for the manufacture of high-quality aluminium alloys in applications such as rolling ingot for foilstock and canstock,billet for precision extrusions and high-quality foundry casting alloys. Chromium Additive 75%Cr5%Al Nickel Additive 75%Ni5%Al Manganese Additive 75%Mn5%Al Cu-Additive 75%Cu5%Al Fe- additive 75%Fe5%Al 2,100% Manganese ,made in the type of tablet,used for element addition of alloy steel.the effect of using this aditive is the same as that of others but the price is more competitive because of govenmentí»s different policy to the varied kinds of manganese products.3)titanium sponge or titanium powder used for element addition of alloy steel.4)Master Alloysú¿Titanium aluminiumú¼Aluminium Manganeseú¬ allow the introduction of necessary alloying metals into Aluminium alloys easier, and some cases possible.
1,Tabletted additives for alloying aluminum have been in use for recent decades.These tablets(also named alloy compact)can be used as master alloys to produce aluminum alloys.They provide an efficient and economic way of making elemental additions such as titanium,iron.manganese,chromium,zinc,nickel and copper in casthouses world-wide for the manufacture of high-quality aluminium alloys in applications such as rolling ingot for foilstock and canstock,billet for precision extrusions and high-quality foundry casting alloys. Chromium Additive 75%Cr5%Al Nickel Additive 75%Ni5%Al Manganese Additive 75%Mn5%Al Cu-Additive 75%Cu5%Al Fe- additive 75%Fe5%Al 2,100% Manganese ,made in the type of tablet,used for element addition of alloy steel.the effect of using this aditive is the same as that of others but the price is more competitive because of govenmentí»s different policy to the varied kinds of manganese products.3)titanium sponge or titanium powder used for element addition of alloy steel.4)Master Alloysú¿Titanium aluminiumú¼Aluminium Manganeseú¬ allow the introduction of necessary alloying metals into Aluminium alloys easier, and some cases possible.
Stainless steel wire mesh Wire materials: type 304, type 304 l, type 316 and type 316 l. Type 304 often refers to as "18-8" (18% chromium, 8% nickel ). T-304 is the basic stainless alloy mostly commonly utilized for wire cloth weaving. It withstands outdoor exposure without rusting and resists oxidation at an elevated temperature up to 1400 degrees fahrenheit. Type 304 l is very similar to t-304, the difference being the reduced carbon content for better weaving and secondary welding characteristics. Type 316: stabilized by the addition of 2% molybdenum, t-316 is an "18-8" alloy. Type 316 has better resistance to pitting corrosion than the other chromium-nickel stainless steels where brines, sulfur-bearing water or halogen salts, such as chlorides are present. Type 316 l: type 316 l is very similar to t-316, the difference being the reduced carbon content for better wire cloth weaving and secondary welding characteristics.
Nickel alloys can offer enhanced corrosion resistance, toughness, strength at high and low temperatures, and interesting magnetic, thermal, and electronic properties compared with other metals. Due to their higher nickel content compared with stainless steel, they can be appreciably more expensive, but find uses in more demanding applications from gas turbines to chemical plants and oil & gas industry components Manufacture Standards: ASTM B163 - Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat - Exchanger Tubes. ASTM B167 - Standard Specification for Nickel-Chromium-Iron Alloys(UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy(UNS N06674) Seamless Pipe and Tube. ASTM B407 - Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube. ASTM B444 - Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy ( UNS N06219) Pipe and Tube. ASTM B622 - Standard Specification for Seamless Nickel and Nickel-Conalt Alloy Pipe and Tube. ASTM B677 - Standard Specification For UNS N08904, UNS N08925, and UNS N08926 Seamless Pipe and Tube. ASTM B829 - Standard Specification For General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube. Normal Grade Hastelloy Series: Hastelloy B(UNS N10001), Hastelloy B-2(UNS N10665), Hastelloy B-3(UNS N10675), Hastelloy C-4(UNS N06455), Hastelloy C-22(UNS N06022), Hastelloy C-276(UNS N10276), Hastelloy C-2000(UNS N06200), Hastelloy G-30(UNS N06030), Hastelloy G-35(UNS N06035). Haynes Series: Haynes 230(UNS N06230), Haynes 556(UNS R30556). Inconel Series: Inconel 600(UNS N06600), Inconel 601(UNS N06601), Inconel 617(UNS N06617), Inconel 625(UNS N06625), Inconel 690(UNS N06690), Inconel 718(UNS N07718). Incoloy Series: Incoloy 020(UNS N08020), Incoloy 800(UNS N08800), Incoloy 800H(UNS N08810), Incoloy 800HT(UNS N08811), Incoloy 825(UNS N08825), Incoloy 925(UNS N09925). Monel Series: Monel 400(UNS N04400). Nickel Series: Nickel 200(UNS N02200), Nickel 201(UNS N02201). High Temperature Alloys: GH2132, GH3030, GH3039, GH3128, GH3044, GH4080A.
