MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminalEnable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
MPPT (Maximum Power Point Tracking)Solar Charge Controller offer an efficient, safe, multi-stage recharging process that prolongs battery life and assures peak performance from a solar array. Each Charge Controller allows customized battery recharging. LCD display , easy to operate on LCD screen Multi stage charging (3-stage charging , parallel charging and equalized charging function) BTS - Battery remote temperature sensor terminal Enable to charge Li-thium, Gel , lead-acid battery With RS485 & USB communication port Protection: PV array short circuit, PV reverse polarity, Battery reverse polarity, Over charging, Output short circuit
MPPT Solar charge controller Feature 1. We choose high speed and high performance 32-bit processor with excellent EMC design 2. Advanced MPPT tracking algorithm, the tracking efficiency more than 99% 3. High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly 4. Ultrafast maximum power point tracking speed to ensure tracking efficiency 5. Accurate identification and tracking of multi-peak maximum power points 6. With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. 7. Widely PV arraysâ?? voltage input, this can save the cost of PV combiner box, wires and construction 8. Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment 9. It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function 10. The perfect battery protection function and multi-stage charging improves battery life 11. It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. 12. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy 13. It can work with GEL. LEAD-ACID, LITHIUM and other type battery 14. Twice protection function to protect battery from damage when the power switch is down (optional) 15. Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
We choose high speed and high performance 32-bit processor with excellent EMC design Advanced MPPT tracking algorithm, the tracking efficiency more than 99% High performance IGBT power module as electronic switch, there is no any mechanical switch, plus multiphase synchronous rectification technology, improves the stable greatly Ultrafast maximum power point tracking speed to ensure tracking efficiency Accurate identification and tracking of multi-peak maximum power points With current-limiting charging function, charging current can be set, friendly and compatible with various capacity batteries. Widely PV arrays voltage input, this can save the cost of PV combiner box, wires and construction Full enclosed duct design and high-speed fan for cooling makes the controller suitable for various harsh environment It shows the ambient temperature. It also has automatic temperature compensation function and RTC real time function The perfect battery protection function and multi-stage charging improves battery life It has the statistical function of generating capacity which is very convenient for customers to view the daily, monthly and total charging capacity of the controller. Complete menu display and operation, plus the humanized design of browsing interface, these makes the operation more easy It can work with GEL. LEAD-ACID, LITHIUM and other type battery Twice protection function to protect battery from damage when the power switch is down (optional) Standard Modbus communication protocol for RS-485 or GPRS communication to extend the communication distance (optional function)
The SANDI solar charge controller adopts advanced digital control technology, touching keys and automatically operation. With the features of PWM (Pulse Width Modulation) battery charging and unique control technology, the PV charge controller improves battery life efficiently. The PV charge controller is only suitable for controlling solar modules. Never connect any other types of charging source to the controller. This can destroy the controller and/or the charging source permanently. To meet different solar power stations need, there are 48V 96V 120V 192V 220V 240V 360V 384V 480V 492V and 600V other normal series voltage level base on different battery voltage of off-grid PV power station system project. Product Feature: 1, The solar controller uses high performance 32-bit chips which is excellent EMC design 2, The controller adopts advanced PID algorithm which has more accurate battery energy management system to improve the battery efficiency 45% at least 3, The controller adopts three charging stages (buck charging, equalize charging and float charging) which can maximize the utilization of photovoltaic modules and batteries 4, IGBT Modular design ensure stable and efficiency performance of solar controller and solar power system 5, The controller has perfect battery protection function and with multi-stage charging technology to improve battery life 35% at least 6, The controller has double loop control function of voltage loop and current loop, user can set the limiting charging current 7, Fully enclosed duct design and high-speed fan for cooling makes the controller working under harsh environments 8, The controller has power generation statistics and real-time power curve function, so we can know power generating information at any time 9, Colorful LCD display, touching key and multi-language option makes the HMC (Human Machine communication) easy and convenient. Users also can set working parameters through the LCD panel and touching keys according to different battery feature 10, The controller also has temperature compensation function and RTC real time clock function, 11, Standard Modbus protocol for RS-485 or GPRS communication to extend the communication distance (optional function) 12, The patent of second protection function which can protect battery from over charging due to power switch failure (optional function)
Charge modeïPWM System voltageï12V Charge current: 8A/10A Load output voltage: 12V Battery typeLead acid (GEL, AGM, flooded) Application 1. The household solar power systems 2. Small solar power system 3. The portable solar application products 1.Electronically regulated charging regime: Boost and float charge 2.Emperature compensation 3.Deep discharge protection 4.PWM series regulation, no panel short circuit 5.Fully electronically protected: panel surge voltage, Wrong polarity at panel or battery, Overload and short circuit at load 6.LED indications: Charge status, SOC, LVD, Overload/Short-Circuit Common positive allows grounding
Solar/poe charge controller + gigabit poe injector Model : bc-4024-g56d 1. Input : 1.1 input voltage: poe : 36vdc ~ 57vdc Solar : 30v ~ 45v Battery : 24v 2. Output : 2.1 output voltage & current: Output : 56v poe(front) / 24v load(rear) Max. Current : 0.63a poe(front) / 10a load(rear) 3. Charger : 3.1 poe charge current : 0.85a (max) For load first, only the balance used to charging. Only work with battery connected. 3.2 poe input watts : 30w(min) 3.3 poe input compliant to 802.3at, all 4 pairs available, giga. 3.4 solar charge current : 40a(max) 28.4, 0.3v vin.
Product introduction: 1, solar street light controller can automatically adapt to 12V and 24V systems. 2. It has a dual-period control function (lit at night and before dawn) to meet the individual needs of customers for street lamps. 3. There are three kinds of load power supply modes: pure light control, light control on + delay off (single time), light control on + delay off - delay on + light control off (double time). 4. The dual-period solar street light controller adopts intelligent machine design. All work processes are controlled by software and can achieve high precision and high reliability. 5, using high-efficiency PWM charging technology, with high-precision temperature compensation. 6. The digital tube displays the operating parameters of the LED lamp. 7, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse and other full electronic protection. 8, the whole machine adopts full potting process, waterproof rating IP68.
Charge modepwm System voltage12V/24V Charge current: 10A/20A Output voltage: 12Vor 24V Battery typelead acid (GEL, AGM, Flooded) Application 1.Street light 2.Advertising lights (1)adopt advanced mcu design, conforming pwm charging controlling technology with strong reliability and anti-disturb capability. (2)adopt solar energy as power source without waste of regular energy. (3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage. (4)with perfect capability, to protect acid battery from over discharge (5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on (6)work under diferent surroundings. (7)memory function: startup load mode and main circuit�??s working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
Charge mode, pwm System voltage, 12v/24v Charge current: 10a/20a Output voltage: 12v or 24v Battery type, lead acid (gel, agm, flooded) Application , 1.Street light 2.Advertising lights (1)adopt advanced mcu design, conforming pwm charging controlling technology, with strong reliability and anti-disturb capability. (2)adopt solar energy as power source without waste of regular energy. (3)perfect protective and temperature compensate function to prevent the battery from over voltage or shortvoltage. (4)with perfect capability, to protect acid battery from over discharge (5)it can restart electrodeless lamp, the controller can restart itself to make sure electrdeless lamp under normal working status when electrodeless lamp is not able to turn on (6)work under diferent surroundings. (7)memory function: startup load mode and main circuits working time can be reached by setting with outer keys. After setting, the time will be saved in memorizer. The data will not disappear even battery is disconnected with controller.
1.Advanced MPPT technology 2.Fully automatic three-stage charge control 3.High efficiency up to 99% 4.High reliability with extensive electronic protections 5.Data logging and networking capability 6.Non-fan design, natural convection.
Product introduction: 1, MPPT lithium battery solar street light controller automatically adapts to 12V and 24V systems. 2, built-in boost type constant current source, the efficiency can reach above 95%. 3, with 4 working modes, working time and LED lamp brightness can be adjusted. 4, with infrared remote control function, all parameters can be set using a remote control key. Can also be used to set the button, directly 5, displayed on the digital tube. 6. The integrated street light controller has a smart power-down function to extend the working hours of the LED lights. 7. High-efficiency PWM charging technology is adopted to ensure that the battery is working in the best condition, which greatly prolongs the service life of the battery and has high-accuracy temperature compensation. 9, with overcharge, over discharge, electronic short circuit, overload protection, anti-reverse protection. 10, full plastic, metal body, waterproof and drop, to deal with various harsh environments.
Specially design for solar-public electricity system, which is in exchange of the solar system, it has power switch where there is a shock by the battery or utility grid, and also the utility grid supply charging module. Its energy saving, and also ensures the power supply. It also has the same function of eprc. Specifications: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof Packing:1pc/color box, 50pcs/carton, carton size:51&31&21cm.Gw:13.5kgs, nw:12.5kgs
The controller is designed for solar dc lighting system. There are several optional working modes, and has two output modes. Dc output modes and two time setting modes. Specifications: 12v, 12/24v, 5a, 10a, 15a Use mcu and professional software as the control center to fulfill intelligent soc control, protection to overload, outside and insdie short circuit, reverse connection, thunder and lightining, pv panel reverse current, over charge and discharing etc, usd pwm high efficiency charging way and temperature compensation. Industry level production standard, led indication on system condition. The controller pcb is pained with england apl lacquer, its highly moisture-proof
Pwm charging Direct, boost and float auto-charging modes. Optimized control for intelligent adjustment of control parameters based on actual charging / discharging rates. Led indication of system working status. Temperature compensation, high precision digital temperature transducer. Over-load and short circuit protections. Rated charging current: 20a, 30a, 40a System voltage: 12v, 12/24v, 48a As the same above
MPPT solar charge controller with timer and battery type selection Key Features 1)MPPT with conversion efficiency up to 99% under charging mode. 2)12V/24V/48V system auto recognize. 3)Controller with Intelligent design and free lifelong online upgrade service. 4)LCD and LED show parameters and system information,like PV input voltage,battery voltage. 5)With intelligent design,the device can be upgraded online lifelong. 6)Nominal maximum solar/PV input is DC 150V . 7)Three Stages Charge mode: fast charge, constant charge, floating charge. 8) With high efficient MPPT operation scheme and adopting TI28035 chip. 9) Support kinds of batteries:Gel,Sealed lead acid,vented,NiCd,etc. 10)Extensible LAN remote control. 11)With CE, ROHS, FCC, PSE certifications. 12)7 languages. 13)2 years warranty
*Product Name: 5A Home Controller(New Style) *Rated Charging Current:5A *Rated Load Current:5A *System Voltage:12V/24V Automatic Identification *Undervoltage Voltage:12.0V; ×2/24V; *Over-discharge Protection Voltage:11V/ 22V *Over-dischargeRecovery Voltage:12.5V/25V *Over Voltage Protection:15.5V/31V *Charge Return Voltage:13.2v ×2/24V *Boost Voltage:14.6V×2/24V (Hold Time10min)(Call it when Only Appear Over-discharge) *Direct Charge Voltage:14.4V; ×2/24V (Hold Time10min) *Float Voltage:13.6V; ×2/24V(Hold TimeDropped to Charge Return Voltage) *Temperature Compensation: -5mv//2VPromote,Direct Charge,Floating Charge,Charging Return Voltage Compensation *No-load Loss:6 mA *Charge Loop Drop:Not More Than0.26V *Discharge Loop Drop:Not More Than 0.15V *Load Overload/Short Circuit Protection:Yes *Control Mode:Hand Switch *Work TemperatureTechnical grade-35 to +55
Power output 12v¡ü30w 24v¡ü60w Voltage output (vin+5v)~60v Voltage distortion range +/-600mv Output current ¡ü1.2a Current output accuracy
1. Built-in LED constant current source. 2. With intelligent four phases PWM digital dimming.(power is 100%,75%,50%,25%) 3. IP68 waterproof degree. 4. The max output voltage is 70V, which can drive 20 LED lamps installed in series 5. Various protections. Specification: System voltage: 12V/24V Auto Output current: 330mA ¨C 2310mA No-load loss: 5mA/12V;7mA/24V Solar input voltage: < 55V The Max. charging current: 8A Overvoltage protection: 17.0V; 2/24V Equal charging voltage: 14.6V; 2/24V(25), duration:1h Ascending charging voltage:14.4V; 2/24V(25), duration:2h Float charging voltage: 13.8V; 2/24V (25) Return voltage during charging:13.2V; 2/24V (25) Return voltage for over-discharging:12.5V; 2/24V Over-discharging voltage:11.1V; 2/24V Temperature compensation :-4.0mv//2V; Light-control voltage :Light-control open 5V; light-control close 6V Efficiency of constant current:90% - 96% Current accuracy:+/-2% Light-control judgment time :10min The Max. output voltage:70V Working temperature:-40 to +70; Protection level:IP68 Weight :160g Dimensions ; 825820(mm)(LWH). Package:1pc/box;54pcs/ctn Size: 280*280*220mm.
