Series lmh slurry pump is mainly used for handling strong abrasive, high density slurries in the metallurgy, mining, coal washery, power plant, building materials and other industries etc. This series of slurry pumps have replaceable wear-resistant metal liners. Its wet parts are with throat bush, impeller, an be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications. Here are the drive types, such as v belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices. The pumps may be installed in multistage series to meet the delivery of long distance.
Structural characteristics Unique motor design (capacitor start and run type) Gun metal / cast iron impeller Internally mounted mechanical seal Low power consumption Light in weight-portable Compact mechanical design Better aesthetics and finish Operating conditions Clean water not containing abrasive particles Liquid temperature up to 60ª c Ambient temperature up to 40ª c Total suction lift up to 6 meters Motor 2-pole, single phase, 50 hz, 220-240 v with thermal overload protector Insulation class b Protection ip 51
Big Capacity Centrifugal Slurry Pump With High Chrome Alloy Product Description Centrifugal slurry pump is a kind of centrifugal pump used for conveying water and solid mixture medium, It is suitable to convey strong abrasive and hard solid medium,such as mining slurry, ash slurry, cement slurry, gravel etc. Centrifugal Slurry Pump Centrifugal Slurry Pump Sand Suction Pump Features Centrifugal Slurry Pump Parameters: 1. Material: High chrome alloy 2. Discharge distance: 100-2000m 3. Flow: 45-2300m3/h 4. Head: 9-135m 5. Max particle size: 50mm 6. Motor power:15-1200KW 7. Working temperature: â?¤80�ºC Centrifugal Slurry Pump Advantages: 1. High performance wear resistant,corrosive resistant. 2. Double pump casing structure. 3. Easy to use and maintain. 4. Do material testing before pouring and after pouring. 5. Use best bearing in China or SKF,TIMKEN brand bearings. 6. Modularization of main parts. No broken, easy to disassemble and repair. Specification: Type Flow(m3/h) Head(m) Speed(r/min) Eff(%) Power(kw) DS400-100 2339 55 590 76.9 560 DS350-100 1785 59.7 590 80.4 450 DS350-70 2118 66.7 980 80 630 DS300-75 1100 92 980 76 450 DS300-75 819 51 730 76 185 DS250-75 750 95.7 980 72 355 DS250-63 592 35.5 730 76 110 DS200-65 500 73 980 69 185 DS200-55 321 28.2 730 69 45 Please send message to get more information if you have other inquiries. Applications This centrifugal slurry pump is suitable for mud or sludge conveying, river dredging, sewage treatment, sand extraction, land reclamation, coastal embankment, dock construction, and also can be used in power plant, metallurgical transportation, tailings
APPLICATIONS : Domestic , Gardens, Pressure boosting and Washing Structural Characteristics Pump Casting : Grey Iron Casting Impeller : Brass Forged Shaft : En8/ss 410 Mechanical : High Alumina Ceramic And Graphite Motor Body : Aluminium Extruded / Ci Jet Foot Valve : Gun Metal Nrv (sp) : Built In MAXIMUM OPERATING CONDITIONS Max.Suc Head : 7 Mtrs Pumping Medium Clean Water Free From Solids, Chemically And Mechanically Non- Aggresive Liquid Temperature
Flow: 15m3/h Head: 65m Power: 5kw Material: cast iron Medium: clean water Outlet dia: 50mm Diameter: 175mm Speed: 2850r/min Voltage: 380V Phase: 3 phase/50Hz Color: Blue QJ Submersible pumps Parameters: Flow range10~500m3/h, Lift scope within 5~405m; Caliber scope 32~203mm, Temperature range-15~80° C. Products Overview: QJ Series submersible pumps widely used in farmland irrigation, spray irrigation and water-use, industrial and civil buildings, also the drainage system to level hills, mountain diversion and in low-lying areas dunes, urban and rural mining supply, drainage and other water conservancy facilities. Characteristics are that they are assembled into a simple structure they have installation convenience a small footprint, simple maintenance and a safe reliable operation. Product use conditions: QJ Submersible pumps use conditions 1. 380 V bias voltage does not exceed + -5% and 50 HZ frequency, and the deviation is not more than + -1% of the three-phase power supply. 2. Electrical cavity must be filled with water. 3. The first-class pump impeller should at least go into the dynamic water level 2 m below surface. Static pump unit immersed under water shall not be greater than 70 m. 4. Electrical from the bottom of the bottom of the well shall be not less than 3 m. 5. The water temperature no higher than 20 ° C, QJR-temperature hot water pump up to 80 ° C. 6. Water and sand content (by mass) of not more than 0.01%. 7. Water PH 6.5-8.5. 8. The hydrogen sulfide in water content is not more than 1.5 mg / L. Application : deep well water farm irrigation sprinkling irrigation urban and rural industry mine supply and drainage. .
can offer replacement KSB slurry pump impellers, the KWPK 65-315 impeller used on KSB KWP Non-clogging Centrifugal Pump, it is a closed non-blocking multi-vane impeller impeller. pumps are Horizontal, single-stage, radially split volute casing types with heavy-duty back pull-out, non clogging impeller design for industrial applications, they have either multi-vane impeller (K), free-flow impeller (F) or open multi-vane impeller (O), the pumps are not self-priming. K type impeller - Closed non-blocking impeller. It is suitable for transporting clean water, sewage, and solids-containing media. The medium should not contain solids that are particularly easy to adhere and easy to entangle (such as extra long fibers or coarse rubber particles).
Sugar cane juice Saline water Series KWP Non-Clogging Centrifugal Pump is a new-generation high-efficiency, energy-saving non-clogging pump made by Tech-Macro with the technology introduced from KSB Co. Description Back pull-out design — allow the rotor to be removed from the pump casing without disturbing the piping or dismantling the casing. Simplify maintenance — allow fast inter change of impeller and wear plate of suction side,thereby permitting pump to be rapidly modified to suit different operating conditions. Specifications Size: 40-500mm(1.5-20 inches) Capacity: 10-4300 m3/h Head: 5-100m Temperature: 0-120 °C Material: Cast iron, Ductile cast iron, SS316, SS304 Application Type KWP pump is of single-stage,centrifugal pump which is specially used for the city water supply, sewage treatment, chemicals, paper and wood, sugar & food processing, and the like. Note:It normally is suitable for delivering the neutral media (PH value is 6-8 about). Impeller: The series KWP pump is supplied with 4 kinds of impeller for selection.
Ss series double-suction centrifugal pumps Feature: High efficiency Low noise and small vibration Reasonable construction and convenient inspection More medium choice Application: Civil water supply, central heat supply, air condition, fire fighting system, Water treatment, drainage station, power plant, waterworks, irregation, Industrial water supply, petrol industries and so on. Performance range: Capacity: q=60m3/h-2750m3/h Head: h=8m-160m Suction presure:
Shinjo Valves-G Series Inline Centrifugal Pump Summary G Series Inline Centrifugal Pump G series inline centrifugal pump is also be called Gseries single-stage and single-suction vertical centrifugal pump, whose performance accords with International Standard of IS02825, and is designed according to latest National Industry Standard of JB/T6878.1 -93. Its efficiency is average higher 3-5% compared with the parameter of JB/T6878.2-93. It is the power saving new product replacing former SG series inline pump. Its max. operating pressure is no higher than 1.0 MPa. Suction pressure is no higherthan 0.2MPa. Performance range: capacity 3.2 - 400m3/h head10-80m Materials contacted with liquid can be selected according to the condition which medium is corrosive to pump. Main part materials contacted with liquid as follows: Except above materials, other applied materials and code selected by customers must accord to Standard GB2100-80. Material code that is not specified by National Standard may use international general material code or nation widely regarded material code ( such as industry or our Company specification).
Tobee offers replacement MCM 250 series Centrifugal Pump 3x4x13 and Nov Mission 2500 Supreme Pump 4x3x13 Halco 2500 Supreme Pump 4x3x13 Mission 2500 Supreme Centrifugal Pump has a semiopen impeller design that contains widetipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids The 2500 Supreme is available in hard iron supreme hard iron and aluminum bronze fluid ends The pumps can be unitized with electric motors diesel engines and hydraulic motors horizontal vertical or closecoupled configuration Design Features Versatile stuffing box Thick strong concentric casing with replaceable casing wear pad Casing provided with replaceable casing wear pad on 4x3x13 10x8x14 models Replaceable stuffing box cover with dual stuffing box bolts Longlife noadjustment mechanical seal available for near zero leakage Replaceable shaft sleeve Solid Frame base Labyrinth seals for maximum bearing protection Duplex angular contact bearings Full pipe diameter entrance for minimum turbulence and maximum efficiency Wide semiopen impeller creates lower axial thrust for improved bearing life All sizes feature the same power end
Sandman Mission 2500 4x3x13 Pump Impeller H19206XX30 is same and match 250 series 3x4x13 Centrifugal Pump Impeller P25D343MRxxx The 250 series Centrifugal Pump has a semiopen impeller design that contains widetipped vanes and a more tangential circumference of the suction allowing the pump to create a smoother flow pattern when handling abrasive fluids The 250 series is available in hard iron supreme hard iron and aluminum bronze fluid ends The pumps can be unitized with electric motors diesel engines and hydraulic motors horizontal vertical or closecoupled configuration Design Features Versatile stuffing box Thick strong concentric casing with replaceable casing wear pad Casing gasket receded for protection Replaceable stuffing box cover with dual stuffing box bolts Longlife noadjustment mechanical seal available for near zero leakage Replaceable shaft sleeve Solid Frame base Labyrinth seals for maximum bearing protection Duplex angular contact bearings Full pipe diameter entrance for minimum turbulence and maximum efficiency Wide semiopen impeller creates lower axial thrust for improved bearing life All sizes feature the same power end
Tobee 100RV SPR Rubber Lined Vertical Circulation Pumps are available in various standard lengths to suit common sump depths, for very deep sumps or where high shaft speeds limit the length of the pump. Rubber Model: 40PV-SPR, 65QV-SPR, 100RV-SPR, 150SV-SPR, 200SV-SPR, 250TV-SPR, 300TV-SPR Wet End parts: Pump Impeller: SPR40206, SPR65206,SPR10206, SPR15206, SPR20206, SPR25206, SPR30206 Pump Casing: SPR40092, SPR65092, SPR10092, SPR15092, SPR20092, SPR25092, SPR30092 Pump Back Liner: SPR40041, SPR65041, SPR10041, SPR15041, SPR20041, SPR25041, SPR30041 Impeller O-ring: RV064-S10, Discharge Pipe Gasket: SP10204, Rubber Back Liner Seal: E4124S01 RV004-1 100RV-SP Rubber Lined Vertical Slurry Pump is designed for handling abrasive and corrosive liquids and slurries, while submerged in sumps or pits. Suited for applications requiring greater reliability and durability than conventional vertical process pumps can offer. It is mainly used for pumping the slurries with high abrasive, strong corrosion and high concentration liquids contain suspended solid particles.
Overview Type NDX pump is applicable for pumping clean water and liquids whose physical and chemical properties are similar to water and without solid particles. This series of products can be used in factories,mines,urban water supply and drainage,HAVC,industrial softened water and farmland irrigation and drainage,etc.It can also be used in pressure stabilization and water supply systems of urban fire control. Pump with the same specification can change the performance parameters by cutting the outer diameter of the impeller;the normal speed of the pump is 1450RPM and 2900RPM, if it is required to operate at the maximum speed of 3550RPM(60Hz power supply or with gasoline and diesel engine),our company can provide technical instruction on the change of the outer diameter of the impeller The type NDX pump features simple structure,reliable performance,small volume,light weight,high efficiency,good ati-cavitation performance, low power consumption and convenient use and maintenance The pump is suitable for pumping medium at temperature of -10~85â?? and working pressure of 1.0MPa,if there is a need to increase to 1.6MPa or higher,please specify when selecting and ordering Performance  Capacity: 5-1650m3/h  Head: 5-135 m Product Features Energy efficient: Applying the most advanced NRCE design software and CFD fluid simulation software to develop and design the high efficiency hydraulic model,through the analysis of pump flow field,temperature field and strength,thermal deformation,fracture,rotor dynamics,etc,to achieve high efficiency ,reliability and wide efficiency zone,we have made the pump satisfy the efficiency and reliability requirements of centrifugal pump operating under design conditions and non-design conditions, reaching the international advanced level. Rear opening type structure:The maintenance is convenient,It is not necessary to disassemble the suction and discharge pipes during maintenance to pull out the rotor parts for maintenance Quality assurance:Before casting,the imported chemical analysis of the materials was carried out by the direct reading spectrum analyzer introduced from Britain to ensure that the material composition meets the requirement.The pump impeller and rotor components are tested by precise dynamic balance test,so the pump can run more smoothly, have less vibration and noise and longer service life. Product orientation:Improve the technical level of the domestic equipment industry, effectively serve equipment and processes to meet the needs of safety,reliability,energy conservation and environmental Protection.
General Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance. The design,manufacture,and quality of this series product meet the standard of GB/T5656â??Technical conditions for centrifugal pumps-Class IIâ??and its efficiency indexes meet the standard of GB/T19762â??The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh waterâ?? Application GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions Performance range  Capacity 95~9000m3/h Head 6~205m  Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150  Speed 740~2970r/min Inlet diameter 125~900mm Outlet diameter 80~900mm Structural feature 1.Sealing Superior mechanical seal,long term operation without leakage Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure Stainless steel shaft sleeve for easy maintenance Half packing gland,large space for packing replacement 2.Protective cover Half-split structure,comply with IE standard,safe and reliable 3.Casing Circular pressure chamber design with high efficiency Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small Auto-correct pump cover for easy installation Inlet DN 500 for universal use by vertical and horizontal types 4.Bearing Short span and enlarged diameter design, stable operation and long service life. Grease lubrication with small and medium pump,online refueling Provided with online vibration and temperature measuring devices to ensure safety operation Transfer high temperature liquid,employ water-cooling structure 5.Shaft Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation Full sealing design, no contact with liquid, and easy maintenance Allow short-time inversion, common shaft for forward and reverse rotations
General Type GSX series product is characterized by broad comprehensive performance curve,sound hydraulic performance, novel structure,high efficiency,high reliability,low net positive suction head ,and low maintenance. The design,manufacture,and quality of this series product meet the standard of GB/T5656 Technical conditions for centrifugal pumps-Class II and its efficiency indexes meet the standard of GB/T19762 The minimum allowable values of energy efficiency and evaluating values of energy conservation of centrifugal pump for fresh water Application GSX series products are mainly used for transport fresh water or other liquid with similar physicochemical properties to fresh water,it can also be widely applied in water supply and drainage system or circulation cooling water system for steel,petrochemical,thermal power generation,mining,and other working conditions Performance range Capacity 95~9000m3/h  Head 6~205m Temperature 80 cooling structure will be adopted for bearing, the material of casing & cover is QT500-7 150  Speed 740~2970r/min  Inlet diameter 125~900mm  Outlet diameter 80~900mm Structural feature 1.Sealing Superior mechanical seal,long term operation without leakage Mechanical seal,strong interchangeability for universal use by non-asbestos soft packing structure and injection type packing structure Stainless steel shaft sleeve for easy maintenance Half packing gland,large space for packing replacement 2.Protective cover Half-split structure,comply with IE standard,safe and reliable � 3.Casing Circular pressure chamber design with high efficiency Double-volute pumping chamber is with balanced radial force and sound strength; bearing and seal are with small force withstanding and long service life Water suction chamber is with split rib design;inlet is without vortex and noise while with stable operation and sound cavitation performance The inlet and outlet water channels are coated with smooth wear-resistant coating,and water loss is small Auto-correct pump cover for easy installation Inlet DN 500 for universal use by vertical and horizontal types 4.Bearing Short span and enlarged diameter design, stable operation and long service life. Grease lubrication with small and medium pump,online refueling Provided with online vibration and temperature measuring devices to ensure safety operation Transfer high temperature liquid,employ water-cooling structure 5.Shaft Bold design,universal use for 50HZ and 60HZ pump shaft,sound rigidity, and stable operation Full sealing design, no contact with liquid, and easy maintenance Allow short-time inversion, common shaft for forward and reverse rotations
HF Series is an single stage end- suction horizontal chemical centrifugal pump. it is in accordance with international standards ISO2858 and non-metallic Horizontal type pump technology combined with design and manufacturing. Pump body metal shell processing dovetail groove lined with FEP (F46), pump cover, impeller and the sleeve are embedded pieces of metal sintering suppression of the overall outsourcing of fluorine plastic. There are made of HT200 cast iron lining with Teflon PTFE / PEP(F46)/ PFA , impeller made by WCB wrapped by PTFE / PEP(F46)/ PFA, which grantee this type centrifugal pump could widely used in corrosive application and wear well. Mechanical seal is outside seal, stationary seal is alumina ceramic ( 99.9%)(or silicon nitride ,silicon carbide) , rotating seal is PTFE filling material or according to customer request. It is also can be made cartridge type mechanical seal. Advantage: High corrosive, well leak-proof, easy assembly and maintenance. Application Field : Acid pickling process Painting process Textile ,Dyes industry, etc Pharmacy & Pesticides Electroplating industry Chlorine water and waste water treatment Petroleum & Pharmaceutical Industry Chemical Industry Adding acid process Non-ferrous metals smelting of electrolyte transport Electricity Power Liquid Solution : Acid, alkali Salt solution Strong oxidant Organic solvents Corrosive slurries, solvents Hydrocarbons and other strong corrosive medium Ammonia water ion film caustic soda Waste water
Vertical slurry pumps are no submerged bearings or seals cantilevered pumps, which ideal for a variety of submerged suction pumping applications. These pumps operate well in a variety of sump conditions, and can also be readily applied on floating dewatering or other floating pump platforms.
We can supply many spare parts of slurry pump. OEM pump part is welcome. Material options: -High Chrome alloy -Grey Iron -Cast Iron -Rubber -Polyurethane -OEM Pump Parts: Metal impeller is made of high chrome alloy, SA05,SA49, anti-abrasive, SA33 anti-corrosive Rubber impeller is made of SR26,SR55, SR33 Polyurethane material is available. Brief introduction: -Spare parts in anti-abrasion high chrome cast iron alloy. -Largest weight of single workpiece can be 13t. -Largest outside diameter of workpiece can be 5m -Manufacture other mechanical parts according to your drawing.
Product Introduction: Is/ir Type Pump Is A Single Suction Centrifugal Pump (axial Suction)is Type Temperature Does Not Exceed80â??ir Type Temperature Does Not Exceed104â??ã?? Product Features In Accordance With Iso2858 Standardafter The Open Structureeasy Maintenance, It Can Repair The Pump Cover And Impeller Without Dismantling Pipelineã?? Technical Parameters: Lift3.6-133m Flow3-460mâ³h Field Of Application: Apply To Industry And City Water Supply And Drainage, Can Also Be Used For Agricultural Irrigation And Drainage, The Transport Of Water Etc.Ã??
Product introduction: CK1 CKX is a single-stage single suction cantilever type centrifugal pump, the excellent hydraulic model and structure ensures that the user can effectively reduce the running cost of the pump in various occasions. Product features: The mechanism is simple, compact, small size, light weight, low power consumption, convenient repair using let characteristics. Technical parameters: Lift4.7-100m Flow4.5-380m/h Field of application: Apply to the transport of water and physical, chemical properties similar to liquid water, used in factories, mines, power plants, city water supply and drainage, air conditioning system, fire protection system, farmland irrigation and drainage.
