Series: 0805 Resistance: 0R 500M 022M full range Power: 1/20W 1W Deviation: D=±0.5%, B=±0.1% Features of Precision Chip Resistors 1. The resistance error is ±0.5%, and the temperature coefficient is ±50ppm/; 2. Small size and light weight; 3. Adapt to reflow soldering and wave soldering; 4. Stable electrical performance and high reliability; 5. The assembly cost is low, and it matches with automatic placement equipment; 6. High mechanical strength and superior high frequency characteristics; 7. Comply with the requirements of ROHS directive. 8. Application areas include handheld products, computer products, industrial and medical instruments, etc.
Chip resistors Series: 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512, 1225, 3720, 7520 Resistance: 0R 500M 0 22M full range Power: 1/32W 3W Deviation: ±0.1%, ±0.5%, ±1%, ±5% Features: 1. Ultra-miniaturized product; 2. Has a three-layer electrode structure; 3. High stability and high reliability; 4. Paper tape packaging is suitable for automatic placement machine installation. Model: 2512 Resistance: 0.0005~0.2R full range Power: 2W, 1W, 1.5W, 3W Deviation: ±0.5%, ±1%, ±2%, ±5% Minimum packaging quantity: 4000PCS/disk Features: 1. Small size and light weight; 2. Adapt to reflow soldering and wave soldering; 3. Stable electrical performance and high reliability; 4. The assembly cost is low and matched with automatic placement equipment; 5. High mechanical strength and superior high frequency characteristics.
Product Name: Zener Diode Category: SMD diode series Product introduction: Series: 4148 4001 4007 2222 5551 5401 5819 Package: LL34, DO-214, SOT-34, SOT-89, SOD-123, SOD-323 Rated power from 0.25W to 5.0W; The breakdown voltage is from 1.8 volts to 400 volts (about 10% as a level); Standard Zener diodes have a tolerance of ±5%. Features: 1. The revolutionary packaging form is suitable for high-speed placement, which can greatly reduce the throwing rate; 2. Suitable for reflow soldering and wave soldering; 3. The strength of the end head can reach the GB/T 2423.29-1999 2MM standard, which weakens the problem of poor bending strength of similar products before; 4. Applicable to electronic products such as computers, instruments, automotive electronics, power supplies, communications, switching power supplies; 5. Comply with the requirements of ROHS directive.
SMD LED size: 0402, 0603, 0805, 1206 colour: Red, Yellow, Blue, Green (Plain Green and Emerald), White, Bicolor (Two Colors) Voltage: 1.6V~2.1V Current: 5~20mA Features: The working voltage is very low and the working current is very small; Good shock and vibration resistance, high reliability and long life; Suitable for reflow soldering and wave soldering; Comply with the requirements of ROHS directive.
Product Name: Rectifier Diode Category: SMD diode series Product series: 4148 4001 4007 2222 5551 5401 5819 Package: LL34, DO-214, SOT-89, SOD-123, SOD-323 Features: 1. The package form is suitable for high-speed patch, which can greatly reduce the throwing rate; 2. Suitable for reflow soldering and wave soldering; 3. The strength of the end head can reach the GB/T 2423.29-1999 2MM standard, which reduces the problem of poor bending strength of similar products before; 4. Applicable to electronic products such as computers, instruments, automotive electronics, power supplies, communications, switching power supplies; 5. Comply with the requirements of ROHS directive.
SMD LED size: 0402, 0603, 0805, 1206 color: Red, Yellow, Blue, Green (Plain Green and Emerald), White, Bicolor (Two Colors) Voltage: 1.6V~2.1V Current: 5~20mA Features: The working voltage is very low and the working current is very small; Good shock and vibration resistance, high reliability and long life; Suitable for reflow soldering and wave soldering; Comply with the requirements of ROHS directive.
Product Name: Common Mode Inductor Product parameters (product overview) volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=±7%, K=±10%, L=±15%, M=±20% Sensitivity: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K 10u 15u 12u 18u 22u 1MH 1.2MH 1.5MH 1.8MH 2.2MH Features: 1. High dimensional precision wire wound inductor suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.
SMD high power resistor product details Volume: 2010 (5025) 2512 (6432) Size: 2010=5.0*2.5, 2512=6.4x3.2 Resistance: 0R 500M 0 22M full range Power: 1W, 2W, 3W Deviation: F=±1%, J=±5% Packing: 4000 Feature description: Small size and light weight; Adapt to reflow soldering and wave soldering; Stable electrical performance and high reliability; Low assembly cost and matching with automatic placement equipment; High mechanical strength and superior high frequency characteristics; The lead-free terminal electrode of the product is RoHS compliant.
Detailed description of precision chip resistors Series: 0805 Resistance: 0R 500M 0 22M full range Power: 1/20W 1W Deviation: D=±0.5%, B=±0.1% Features of Precision Chip Resistors 1. The resistance error is ±0.5%, and the temperature coefficient is ±50ppm/ 2. Small size and light weight; 3. Adapt to reflow soldering and wave soldering; 4. Stable electrical performance and high reliability; 5. The assembly cost is low, and it matches with automatic placement equipment; 6. High mechanical strength and superior high frequency characteristics; 7. Comply with the requirements of ROHS directive. 8. Application areas include handheld products, computer products, industrial and medical instruments, etc. Imperial (in) Metric (mm) Resistance Voltage Power Rating 0201 0603 0-47M 25V 1/20W 0402 1005 0-47M 50V 1/16W 0603 1608 0-47M 50V 1/16W, 1/10W 0805 2012 0-47M 150V 1/10W, 1/8W 1206 3216 0-47M 200V 1/8W, 1/4W 1210 3225 0-47M 200V 1/4W, 1/3W 1812 4832 0-47M 200V 1/2W 2010 5025 0-47M 200V 1/2W, 3/4W 2512 6432 0-47M 200V 1W
SMD LED size: 0402, 0603, 0805, 1206 color: Red, Yellow, Blue, Green (Plain Green and Emerald), White, Bicolor (Two Colors) Voltage: 1.6V~2.1V Current: 5~20mA Features: The working voltage is very low and the working current is very small; Good shock and vibration resistance, high reliability and long life; Suitable for reflow soldering and wave soldering; Comply with the requirements of ROHS directive.
SMD triode conventional specifications include: Package: SOT-23 model: S9012, S9013, S9014, S9015, S9018, S8050, S8550, SS8050, SS8050 Our chip triode products are mainly used in: 1. Power Products 2. Lighting equipment 3. Automotive Electronics 4. Medical Equipment 5. Intelligent products 6. Network communication equipment 7. Instrumentation The role of the chip triode includes: 1. Commonly used for voltage amplification and current amplification; 2. Dominate the oscillator circuit 3. Use as an electronic switch 4. Play the role of impedance change 5. Use as a variable resistor
Product name: I-shaped inductor Category: SMD inductor series Product introduction: volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=±7%, K=±10%, L=±15%, M=±20% Sensation: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K 10u 15u 12u 18u 22u 1MH 1.2MH 1.5MH 1.8MH 2.2MH Features: 1. High dimensional precision wire wound inductors suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.
Product Name: Common Mode Inductor Product parameters (product overview) volume: 0402, 0603, 0805, 1206, 2520, 3225, 4532, 5650 Tolerance: I=±7%, K=±10%, L=±15%, M=±20% Sensitivity: 1.2N 1.5N 2.2N 3.9N 6.8N...... 1R0K 1R2K 2R2K 2R7K 3R3K 4R7K 10u 15u 12u 18u 22u 1MH 1.2MH 1.5MH 1.8MH 2.2MH Features: 1. High dimensional precision wire wound inductor suitable for automatic placement; 2. Good solderability; 3. Heat-resistant resin encapsulation with excellent mechanical strength; 4. Excellent Q value and high reliability; 5. Used in LCD TVs, computer drives, mobile phones, car audio and other electronic products.
Detailed description of precision chip resistors Series: 0805 Resistance: 0R500M 022M full range Power: 1/20W1W Deviation: D=±0.5%, B=±0.1% Features of Precision Chip Resistors 1. The resistance error is ±0.5%, and the temperature coefficient is ±50ppm/; 2. Small size and light weight; 3. Adapt to reflow soldering and wave soldering; 4. Stable electrical performance and high reliability; 5. The assembly cost is low, and it matches with automatic placement equipment; 6. High mechanical strength and superior high frequency characteristics; 7. Comply with the requirements of ROHS directive. 8. Application areas include handheld products, computer products, industrial and medical instruments, etc. Imperial (in) Metric (mm) Resistance Voltage Power Rating 0201 0603 0-47M 25V 1/20W 0402 1005 0-47M 50V 1/16W 0603 1608 0-47M 50V 1/16W, 1/10W 0805 2012 0-47M 150V 1/10W, 1/8W 1206 3216 0-47M 200V 1/8W, 1/4W 1210 3225 0-47M 200V 1/4W, 1/3W 1812 4832 0-47M 200V 1/2W 2010 5025 0-47M 200V 1/2W, 3/4W 2512 6432 0-47M 200V 1W
SMD high power resistor product details Volume: 2010 (5025) 2512 (6432) Size: 2010=5.0*2.5, 2512=6.4x3.2 Resistance: 0R500M 022M full range Power: 1W, 2W, 3W Deviation: F=±1%, J=±5% Packing: 4000 Feature description: Small size and light weight; Adapt to reflow soldering and wave soldering; Stable electrical performance and high reliability; Low assembly cost and matching with automatic placement equipment; High mechanical strength and superior high frequency characteristics; The lead-free terminal electrode of the product is RoHS compliant.
SMD inductor parameters: Volume: 0402, 0603, 0805, 1206, 1210 Units: H, NH, UH, MH Error: 5%, 10% Packing: 4000PCS/disk, 3000PCS/disk above 1206 Current: the difference between small current and large current, unit A (ampere) The chip inductors in our inventory are complete in specifications: A complete range of conventional models, including: SMD magnetic beads, high current SMD inductors, SMD power inductors, high frequency inductors, SMD wire wound inductors, laminated inductors, common mode inductors, shielded inductors, I-shaped inductors, etc.; Conventional inductance, rated current and other parameters are in stock. The role of chip inductors: 1. Filtering Because it has the characteristics of passing DC and blocking AC, it can be used for power supply filtering; 2. Resonance It can form a resonance frequency selection circuit with a capacitor, and the resonance frequency is determined by the size of the chip inductance and capacitance; 3. Frequency division Can be used for frequency division of high and low frequency signals Application fields of chip inductor products: Internet of things products, smart products, Internet products, communication products, 3D printers, etc.
SMD high power resistor product details Volume: 2010 (5025) 2512 (6432) Size: 2010=5.0 2.5, 2512=6.4x3.2 Resistance: 0R 500M 0 22M full range Power: 1W, 2W, 3W Deviation: F=1%, J=5% Packing: 4000 Feature description: Small size and light weight; Adapt to reflow soldering and wave soldering; Stable electrical performance and high reliability; Low assembly cost and matching with automatic placement equipment; High mechanical strength and superior high frequency characteristics; The lead-free terminal electrode of the product is RoHS compliant.
China Pingshang Technology SMD resistor manufacturer, good quality, complete specifications, has a large stock warehouse, and sufficient supply. Large quantities can be shipped stably for a long time. Welcome to negotiate. SMD resistor product description Brand: Sanhuan Series: 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512 Deviation: ±1%, ±5% Resistance: 0.1R-10MR Package: 5000 main effect Shunt, current limit, partial pressure, bias SMD resistor feature description 1. Ultra-miniature products; 2. Has a three-layer electrode structure; 3. High stability and high reliability; 4. Paper tape packaging is suitable for automatic placement machine installation.
Main Engine Spare Parts And Diesel Generator Spare Parts, New And Used Chains And Ship Cables, Used Diesel Generators, Electronic Equipments, Used Ship Equipments, Original Spare Parts And Oem Spare Parts, Provision And Bonded Store, Consumables, Engine Room, Deck And Hull, Development And Ship Components, Inspection Of Rescue And Firefighting Equipments, Supply Anode Protections, Ship Chemicals, Pipe Fittings And Equipments, Mooring Lines, Polymer Adhesives, Sealants, Navigation ,Equipments And Measuring Instruments, Electrical Equipments, Pipeline And Body, Marine Valves, Marine Electronics And Electrical Systems, Calibration Service, Ship Propellers And Propeller Steering Complex, Modernization Of All Types Of Ship Equipment.
Wires, Cables, Thermocouples, Thermal Resistances, Temperature Transmitters, Pressure Transmitters, Safety Barriers, Isolators, Pressure Gauges, Power Distribution Cabinets, Energy Saving Motors, Dust Removal Equipment, Flow Meters, Level Gauge, Analytical Instrument, Dcs, Plc, Junction Box, Level Gauge Level Switch, Pump Valve Heating Cable, Flat Frequency Cable.