EAR 110 Engine: RICARDO Engine Model : R6105-ZD Stand By kVA: 110 Stand By kW : 88 Prime kVA: 100 Prime kW : 80 Rated Current : 144 Engine - RICARDO heavy duty diesel engine - 12V starter and charge alternator - Replaceable air, fuel and oil filters - Mechanical governor control - Tropical type radiator - Flexible fuel hose - Oil drain valve and extension hose - Industrial type silencer and steel compensator - Maintenance-free starter battery - Water jacket heater - 1500 rpm engine speed Alternator - IP 21-23 Protection Standard - H Insulation Class - 50 Hz Frequency - 4 pole brushless synchronous type alternator - Automatic Voltage Regulator (AVR) - 400/230V AC Output Voltage - 1500 rpm Sound Proof Canopy and Chassis - Convenient design for easy lifting and carrying - High standard sound proof canopy design - Modular design with easily removable nuts - bolts - Lockable doors - Transparent window for watching Control Panel - Electrostatic powder painted, providing protection against harsh weather conditions - Emergency STOP button - Fuel tank inside the chassis - Anti-vibration wedges (engine - chassis and chassis â?? ground) Optional - Thermal magnetic CB (for automatic models) - Super Silent Canopy - Mobile Generator Sets - Automatic fuel filling system - Synchronization panel - 3 Pole and 4 Pole ATS (Automatic Transfer Switch) - Fuel Heater, Oil Heater - External fuel tank and automatic fuel filling system - Fuel - water separator filter - Remote monitoring and control system Engine RICARDO Engine Model R6105-ZD Number of Cylinders 6 Inline Injection System Direct Compression Ratio 16:01 Bore 105 Strok 130 Displacement L 6,49 Air Intake TURBO Speed (RPM) 1500 Oil Capacity 16 Standby Power kw / Hp 115,5 / 154,8 Prime Power kw / Hp 105 / 140,7 Fuel Type Euro Diesel Governor System Mechanical Cooling System Water Cooling Coolant Capacity L 23 Fuel Consumption (lt / h) L Full Load 22,2 L %75 LOAD 16,7 L %50 LOAD 11,1 Frequency Hz Power kVA 110 Voltage V 230 / 400 V Number of Phases 3 Automatic Voltage Regulator (A.V.R.) AS440 Voltage Regulation ±1% Insulation Class H Protection Standard IP21 - IP23 Power Factor 0,8 Weight (Silent) Kg 1480 Weight (Open) Kg 1230 Width (Silent) Mm 1000 Length (Silent) Mm 3150 Height (Silent) Mm 1700 Fuel Tank Capacity L 250
Wrought iron, automatic doors, gates, balustrades and handrails, cast aluminum, automatic doors, automatic gates, balcony grills, private protection grills, staircase handrails and main entrance doors, stainless steel, kitchen hardware appliances like tables, chairs cold & hot containers storages, and, stainless gates, grill, balustrades, stainless steel handrails and stainless steel cladding, aluminum & glass, glass partition, shower partitions, glass balcony, glass handrails, aluminum cladding, aluminum canopy, aluminum pergolas and aluminum window glass, automatic swing sliding systems, overhead doors, intercom services, road barriers, stainless steel, aluminum and glass works, mild steel, aluminum products, automation and steel structures.Manufacturing
FRP & GRP products, gratings, molded, pultruded, high load gratings, pultrusion profiles, cable trays, ladders, handrails, staircases, structural profiles, i beam, c channel, square tubes, deck panel for cooling tower, hand molding products, frp tanks, motor canopies, car stopper for parking garage, speed breakers, gutter & trench system for warehouses, manhole covers, sleepers for mines bench for parks, frp safety cones, passive fire proofing products, minerals, valves, motors, switchgears, electronics and computers, vehicles, organic chemicals, construction, iron, copper, steel, aluminium, electrical machinery equipment, plastic, dry fruits like saffron, dates, pistachio, almonds, raisins, fresh fruits , quinoa ,coffee , cacao .
Name : 2-Person Outdoor Large Convertible Canopy Swing Sofa Category : Wicker Cane Outdoor Furniture Description : Colour - Brown Material -Wrought Iron and Wicker Item Weight 150 Kilograms Item Dimensions LxWxH 1650 x 1200 x 1950 Mm Mrp Price : 52000 Discounted Price : 42000 Brand : Jagaran Enterprises Cod : Available Shipping Policy : Outside city orders are processed within 2-3 business days. Orders are not shipped or delivered on weekends or holidays. Same city are processed the same day, in case the stock is ready. Return & Refund Policy : You must place your refund request within 15 days of delivery of the item. In case of the return of the goods, you will be responsible for paying the return shipping costs.
DISCRIPTION : "Polyester CM350P is a high performance general purpose two-component chemical anchoring system that has been formulated for anchoring in a wide variety of building materials.To match your installation environment, Polyester CM350P is available in two gel/cure slow for high-temperature environments, and standard. Furthermore, the resin is available in grey color. All features combined make Polyester anchoring resin a versatile and cost effective anchoring system. The resin is CE Marked and has an Option 7 European Technical Assessment for anchoring into uncracked concrete. Polyester CM350P is available in CiC (foil pack), C-CN (co-axial) and S-SN (side-by-side) cartridges." APPLICATION : Canopies- Ventilated Facades. Railings Bicycle Racks Balcony Fences Hand Rails Machinery" APPROVAL : ETA according to EAD 330499-00-0601 (Option 7: Uncracked Concrete)
"CM350VESF is a multi-purpose bonded anchoring system with improved performance. It is suitable for use in dry, wet and flooded holes. Formulated free of styrene, CM350VESF has a very low odour and is ideal for use in confined spaces and indoors. CM350VESF bonded anchoring system is CE Marked and has an Option 7 European Technical Assessment for anchoring into uncracked concrete, an ETA for post installed rebar connections as well as a masonry ETA for anchoring into hollow and solid masonry. CM350VESF is available in CiC (foil pack), C-CN (co-axial), S-SN (side-by-side). Polyester CM350P is available in CiC (foil pack), C-CN (co-axial) and S-SN (side-by-side) cartridges." APPLICATION : Canopies- Ventilated Facades. Railings Bicycle Racks Balcony Fences Hand Rails Machinery APPROVAL : ETA according to EAD 330499-00-0601 (Option 7: Uncracked Concrete.
HL is a national steel structure manufacturer with Grade First Qualification of Engineering. HL has obtained the ISO9001 Quality System Authentication. HL is a professional steel structure manufacturer in Liaoning Province. The steel structure factory building is the building whose load-bearing mainly consist of steels including steel column,rigid frame, steel beam, structure foundation, steel roof truss, structural steel ,steel canopy and etc. There are light-duty steel structure factory building and heavy-duty steel structure factory building. Product Featuresï¼? 1. Light weight, high strength and large span. 2. Shorter construction period, reducing the investment cost. 3. Better fire resistance and corrosion resistance. 4. Convenient movement and pollution-free recycle.z
LED is eventually becoming most ideal lighting source due to its advantage of long lifetime, high brightness, environmental protection and low consumption. Jereh Global is the leading specialier to support oversea clients in LED Lights application. Various LED Lights, such as LED panel light,LED tube light,LED down light, LED high bay light,LED flood light,LED canopy light, LED street light, solar energy LED road light,wind and solar energy LED road light etc, are available as per customer's expectation. Any of your inquiry or comments about LED light to mailbox:dong.cui@jereh.com is warmly welcome. will duly reply, thanks.
Polycarbonate sheets: high performance engineering thermoplastic sheet that is characterized by high clarity heat and flame resistance, dimensional stability and exceptionally high impact strength over a wide temperature range, and durable for outdoor application because of uv layers on both sides, and impact strength at low temperature, chemical resistance and dimensionally stable with resistance to cracking and splitting dealing to weather resistance. Used in swimming pool and stadium roofing, skylight domes and canopies, light covers, gates and doors, interior and exterior windows, automobile components, partitions, insulation for electrical panels, green houses, medical and computer components. Size As sheets In rolls Thickness(mm) 15mm 1mm Thickness(mm) 1mm 0.7mm Standard (mm) 2050mm & 1220mm 1220mm Standard (meters) 3000mm & 2440mm 30meter
This is a high-end baby stroller we designed¡aZebra series, obtaining a warm reception from people at home and abroad. The advantages are following: cradle and seat interchangeable device, multi-function seat unit, inside have wooden board, spongy fabric, air cushion, they are detachable for washing, the front wheel is equipped with spring, outer tube is very hard (conform to the DSM), the thickness of aluminum alloy is 1-5mm, EN1888:2012 test , the front wheel is the 360 degreed universal wheel, can be converted to different directions, the direction of the handlebar can be converted, the direction of the seat can be changed also, braking system together with the handlebar, avoiding the shock, super storage bag is PE board, stroller is supplied with rain cover and adjustable canopy, the shaft of the wheel is the plating aluminum. 92*54*28 CM 16 KG 139,000 CM*CM
This is a high-end baby stroller we designed¡aZebra series, obtaining a warm reception from people at home and abroad. The advantages are following: cradle and seat interchangeable device, multi-function seat unit, inside have wooden board, spongy fabric, air cushion, they are detachable for washing, the front wheel is equipped with spring, outer tube is very hard (conform to the DSM), the thickness of aluminum alloy is 1-5mm, EN1888:2012 test , the front wheel is the 360 degreed universal wheel, can be converted to different directions, the direction of the handlebar can be converted, the direction of the seat can be changed also, braking system together with the handlebar, avoiding the shock, super storage bag is PE board, stroller is supplied with rain cover and adjustable canopy, the shaft of the wheel is the plating aluminum. 92*54*28 cm 16 kg 139,000 cm*cm
General info: 1.Category:wheel tractor 2.Driving wheel:two wheel drive or four wheel drive 3.Usage:farm tractor 4.Certification:CCC or ISO 9001 or EPA or CE 5.Brand:Frata 7.Power:from 20hp to 165hp 8.Engine:YTO,Perkins,Lovol technology 9.Warranty period:1 year when load at destination port 10.Minimum order quatity:1 Unit 11.Delivery time:within 25-30days after confirmation of the order 12.Payment method:T/T or L/C Specification: Items Unit Min Max Engine Model YTO engine with Perkins technology Rated power kw 23.5 121.3 hp 32 165 Rated speed r/min 2200 2400 Dimensions of Tractor Drive Type Two wheel drive or four wheel drive Rated Traction kn 8 35 Overall Dimensions L*W*H mm 2900*1400*2030 5350*3500*3110 Wheel base mm 1600 2760 Front Wheel tread mm 1100 1876 Rear Wheel tread 1130 1850 Min.Ground Clearence mm 355 450 Radius of Turining Circle m 4.6 4.9 Constructional weight kg 1210 7150 Forward speed km/h from 1.9 to 24.76 from 2.31 to 34.85 Back speed from 1.78 to 7.09 from 3.10 to 10.78 Transmission & Steering Clutch Single disc, dry-type, dual stage Gearbox 4 X (2+1) or 4 X(2+1) X2 with cheeper-gear Wheel Tyre front Wheel 6.00-16 14.9-26 rear Wheel 11.2-24 18.4-38 Steering gear Hydraulic power steering . Features: 1.large power output, low fuel consumption, large traction, advanced chassis and good load-bearing capacity. 2.The tractor is developed on the basis of the Italian wheeled tractor chassis technology, adopting the British technology-based engine. 3.The tractor has a desirable power economic efficiency. 4.It has multiple gears and a wide speed range. Besides, it is flexible in steering and easy to operate. 5.Dual stage clutch, hydraulic steering, combined meter, combined lamps, front & rear ballast, multi-way valve, fieberglass hood, shuttle shift, spring seat, roll bar, canopy, cabin with fan/heater/air conditioner! 6.front end loader,backhoe and other implements are available. Tractor Details: 1.Engine:YTO,Perkins,Lovol technology 2.Gearbox:F8+R4 gearbox or F16+R8 with creeper gear 3.Steering gear:Hydraulic power steering 4.Clutch:Single disc,dry-type,dual stage cluth 5.PTO:Dual speed PTO Packing method: 1.Non-Fumigation pallet 2.Iron crate or in bulk 3.as your request Customers all over the world: Iron crate or in bulk depends on tractor hp or as your request
Wate spray fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity:Ground): 38 L (13) Jet distance: 8 m (14) G.W: 28.8KG; CBM: 0.20M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Steam Cooling Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) (10) Hand Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: ú+10 um (12) Capacity (Ground): 38 L (13) Jet distance: 8 m Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip:ú+10 um (12) Capacity(Ground): 38 L (13) Jet distance: 8 m (14) G.W: 25.4KG; CBM: 0.19M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650W; (5) Mist Fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Wall Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity(Wall): 10 L (13) Jet distance: 8 m (14) G.W: 17.1KG; CBM: 0.093M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GB; (3) Mist fan AM-650GT; (4) Mist fan AM-650C; (5) Mist Fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Air Cooler design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20 It include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Mist Fans Mist Fan (AM-650GB) Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20 it include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM
Osi is a weaved wicker luminaire which is suspended from the ceiling using driver mounted canopy cup. The cross weave design gives an additional touch to its look. The luminaire is available in 3 sizes of 450mm, 600mm and 900mm in diameter. The inner section consists of the LED module and acrylic diffuser for spotless and glare free light distribution. Electrical Input Voltage 180 - 280 AC 50Hz Driver Type Constant Current Driver Control Switch / DALI / Analog Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Wicker Environment Indoor Mounting Suspended Light Distribution Direct Body Finish Wicker Weave Optics Diffuser Driver Mount Inside Canopy Cup Thermal Management Passive Cooling Light Source LED Medium Power LED / Bulb Binning 3 Step MacAdam Luminous Efficacy 95 Lm/W Color Temperature 2700K / 3000K / 4000K / 5700K / 6500K CRI 80 (Standard) 90 (Optional) Tunable LED (Optional) UGR < 19 LED Life > 50,000 hours Size And Wattage -450-10W 600-20W 900-30W
Mesh is a cross weaved wicker luminaire composed of a glass globe as the light source. The luminaire is available in single size of 450mm in diameter. The wicker is of double layers through which the light passes in the sides. Suspended from the ceiling using driver mounted canopy cup. Electrical Input Voltage 180 - 280 AC 50Hz Driver Type Constant Current Driver Control Switch / DALI / Analog Connection Plug-in Type Pre-wired General Characteristics Appliance Class Class 2 Ingress Protection IP40 Photobiological Safety RG 0 - No Risk Ambient Temperature 0 to +50 C Luminaire Housing Material Wicker Environment Indoor Mounting Pendant Light Distribution Direct Body Finish Wicker weave Optics Glass Globe Driver Mount Inside Canopy Cup Thermal Management Passive Cooling Light Source LED Medium Power LED Binning 3 Step MacAdam Luminous Efficacy 95 Lm/W Color Temperature 2700K / 3000K / 4000K / 5700K / 6500K CRI 80 (Standard) 90 (Optional) Tunable LED (Optional) UGR < 19 LED Life > 50,000 hours Size And Wattage - 400-15W
