What is foam mixer? The foam mixer is uniquely designed to mix foam agent with other materials, such as fly ash, sand, cement, etc. It can ensure the accuracy of the amount of raw materials, and improve efficiency as a result. What are the advantages of the foam mixer? 1. Raw material: Anything that can be mixed with cement is available to the foam mixer, such as sand, fly ash, cement,stone powder,slag, industrial waste, construction waste etc. So the use of foam mixer is not affected by the inflation of prices. In another word, the cost is fairly low. 2. Economies: the machine only costs a hundred thousand to hundreds of thousands of inequality. So it is suitable for medium and small-sized investors. 3. Environmental: the foam mixer is environmental. Because it does not need still kettle and boiler. As a result, there is no liquid waste and discharge gas. 4. Full automatization: the foam mixer is almost full automatization. Only several workers can complete the work.
Cutting machine is designed to cut blocks transversally and longitudinally. Advantages: 1. Highly-automated: you can control the machine only by pushing the button. Thus one to two workers can complete the work. 2. Attractive appearance: the cutting machine cuts the block from the top to the bottom. As the result, the bricks are angular and flattening. This is the unique characteristic that many other kinds of cutting machines does not have. 3. Flexible: Different clients need different sizes. This point is the problem that many factories want to solve. And our factory has already solved the problem. Our cutting machine can produce bricks of different sizes: 600/400*200*100, 600/400*200*200, 600/400*200*300, 600/400*200*240, 600/400*200*250, 600/400*100*300 and so on. Our machine is also flexible on time. As long as the brick is not dry out, you can cut the block at any time.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
The push car is designed to push the mold to the bottom of the foam mixer. it is usually fixed on the start of the rail. cooperate with the ferry car, only one worker can control the pouring section.
Parallel cutting machine made by Gongyi Xiaoyi Shield Machinery Manufacuring Factory is designed to cut the surface of the blocks. So that the surface of the blocks are smooth.
Parallel cutting machine made by Gongyi Xiaoyi Shield Machinery Manufacuring Factory is designed to cut the surface of the blocks. So that the surface of the blocks are smooth.
Maximum high pressure tonnage 70 Oil tank capacity 100 liters Power (motor) 5 hp Production capacity 2400 to 2500 per shift
High pressure with vibrator Oil tank capacity 300 liters Power (motor) 7.5 hp with vibrator motor 2 hp Production capacity 8500 to 12500 per shift And Pan mixer with material carrying conveyer belt.
Maximum pressure tonnage 50 Oil tank capacity 60 liters Power (motor) 5 hp Production capacity 2400 to 2500 per shift
Product specifications and yield Product specification Second/time Multihole brick 240*115*90£¨mm£©, 16 Piece, 2880 Piece, 20 Second/time Border brick 1000*150*300£¨mm£©, 1 Piece, 90 Piece, 40 Second/time Jf-qt 1500d multifunctional jolt-squeeze type wall&floor brick forming machine Feature 1., 18 pieces holland brick can be made per time, higher production than old models and cost saving. Surface feeding machine automatically feeds the color surface of paving bricks. 2., concrete blocks and bricks within 1000*500 mm (l*w/h) can be made by changing different moulds, with one machine. 3., our patented long guiding sleeves with four high quality guiding pillars are creating a stronger and better structure. 4., automatic operation for pallet feeding, aggregating, vibrating, pressing and brick receiving, and several matched equipments are for customer¡¯ s choose to save more labor force. 5., high density steel for machine frame, advanced heat treatment for spare parts and moulds, make sure the high quality of machine and improve the using lifetime. 6., easier for operating, maintenance and changing parts, which makes machine working all year round without wasting time on maintenance. No., item, parameter 1, shock force, 68kn 2, frequency , 6500(time/min) 3, amplitude, 15mm 4, noise, 95db(a) 5, shock time, 6(second/time) 6, overall dimension, 3400¡¿1900¡¿2250(mm) 7, power, 24.2kw 8, weight, 7.5£¨t£© 9 , max pressure, 10t 10, pallet size, 1100¡¿570¡¿20(mm) 11, worker, 8 (person) 12, land, ¡ã3000 m©÷
Feature 1.This machine is upgraded into 18 blocks of bread bricks presses each moulding so as to greatly raise the production efficiency and to reduce the cost. 2.Dies can be freely changed, so as to realize ¡°one machine, but diversification¡±. 3.With four-pillar guiding and patented lengthened guide sleeve, the structureis firm and durable. 4.Supporting facilities are complete, so as to raise the degree of machanization and to save the human resource greatly. 5.Compulsory die synchronized structure so as to ensure the uniformed thickness of products, stable demoulding and high rate of finished praducts. 6.Realize the automatisation of plates¡¯coming in&out, aggregate, shock and pressing. Main technical parameter Product specification (l*w*h)(mm)modelnumberperhour yieldproduce period Standard brick 240*115*53(mm)32 piece4800 piece24second/time Hollow brick 390*190*190(mm)5 piece750 piece24second/time Bread brick 198*98*60(mm)18piece2700piece24second/time Multihole brick 240*115*90(mm)16 piece2880 piece24second/time Border brick 1000*150*300(mm)1 piece100 piece24second/time
Feature 1., plate vibrates with mould.Make to spread to flap effect to show zhao more. 2., 360¡ærotating and cutting mode realize smoothly aggregation. 3., arouse earthquake and liquid to press to combine, assurance product even airtight solid degree. 4., full-automatic control, adopt japanese home comuter pc a control, valid of educational system machine and liquid press of close match, finished product rate gao, the breakdown rate is very low. 5., powder ash from stove, stove residue, coal gan stone etc.The industry discard a residue all can the function is an original material. 6., discard residue chan can reach to 75%. 7., kit auto the code flap machine and make exalltation productin eficiency, and consumedly saved manpower. 8., strength grade 5-70mpas. 9., the equipments produce the abiity significant exaltation and be applicable to grealy, meduim-sized brickyard. Ordinal number, item, parameter 1, actuating shock force, 78kn 2, frequency of shock, 5000ó/ýâ(time/minute) 3, amplitude, 15mm 4, noise, 85db(a) 5, shock time, 5õ©/ó(second/time) 6, overall dimension, 8000¡¿2800¡¿3000(mm) 7, installed capacity, 65kw 8, weight of complete machine, 15t 9, maximum pressure, 20t 10, give plank size, 940¡¿580¡¿25(mm) 11, operation number, 10 ìñ(person) 12, use a ground of area, ¡ã5000 m©÷
Feature 1.Changing any moulds can make different kinds of bricks and blocks. 2.Back and forth way of feeding raw materials, and special-made feeding forks, so guarantee efficient and uniform aggregation, also for products good density. 3.Automatical operation for pallet feeding, aggregating, vibrating, pressing and brick reciving, and several matched equipments are for customer's choose to save more labor force. 4.High density steel for machine frame, advanced heat treatment for spare parts and moulds, make sure the high quality of machine and improve the using lifetime. 5.Easier for operating, maintainance and changing parts, which makes machine working all year round wasting time on maintainance. Ordinal Number Item Parameter 1 Actuating shock force 78kn 2 Frequency of shock 5000(time/minute) 3 Amplitude 15mm 4 Noise 95db(a) 5 Shock time 6(second/time) 6 Overall dimension 3500¡¿1800¡¿2500(mm) 7 Installed capacity 24.2kw 8 Weight of complete machine 6t 9 Maximum pressure 10t 10 Give piank size 1100¡¿570¡¿20(mm) 11 Operation number 8 (person) 12 Use a ground of area ¡ã3000 m©÷
Feature 1.Professional heat elimination technology to make sure machine works in good condition. 2.Changing any mold can make different kinds of bricks and blocks. 3.Auotmatical operation for pallet feeding, aggregating, vibrating, pressing and brick reciving, and several matched equipments are for customer's choose to save more labor force. 4.High density steel for machine frame, advanced heat treatment for spare parts and moulds, make sure the high quality of machine and improve the using lifetime. 5.Easier for operating, maintainance and changing parts, which makes machine working all year round withour wasting time on maintainance.
Engine: honda, robin, b&s, chinese petrol Frequency :5600 vpm Centrifugal force :10.5kn Compaction depth :20cm Travel speed :40cm/s Efficiency :450m2/hr plate size:50*36cm Weight:60kg 750*380*560mm
Model, roller no., roller size ring size, max Feed Size, finished ¡¡size (fineness), fineness of final product (mm)
Demo unit trimble s8 high precision 1" sec accuracy robotic total station set and tsc3 controller, really good condition and ready to use The trimble s8 total station serves both general surveying and specialized engineering applications. Ideal for one and n Trimble dr plus for longer range and fewer setups Specialized configuration options available The most demanding jobs require the most advanced total station in the industry. Whether you need solutions to drive productivity for day to day survey tasks or precision solutions for demanding engineering projects, the trimble s8 is an advanced total station solution. You can do more and do it better with this innovative and advanced total station. With trimble vision you can see everything the instrument sees, without a trip back to the instrument. - select targets with just a tap of the controller screen - measurements are drawn to the video image, so you can be certain to never miss a shot you need Leave the site with more than just coordinates. With the trimble s8, live images are captured with point-and-click efficiency. - document important visual information like site conditions and details - easily recall what was at the scene The following items are included in this auction: (1) trimble s8 high precision 1" robotic total station with finelock (1) trimble tsc3 with access software and 2.4 ghz radio (1) trimble mt1000 multiprism (1) charging kit (1) chargers (1) cables (hirose to hirose, hirose to usb) (3) batteries Complete sets
Aerated concrete density is usually 600-800kg/m3(according to the market in production), same as 1/3 of clay brick and 1/5 of common concrete, so use the light brick can reduce the weight of the building, and also reduce the beam of roof and pillar press, also you can see, it can save the material and costs, Keep temperature. It has many porous, the delivery hearting coefficient is 0.90.22W/MK, so it is the best materials in the world now, also many kinds of raw materials, have lowest waster materials, coal ash, sand waste mine materials stone dust and other silicon materials. Raw material: Sand, fly ash, lime, gypsum, aluminum, cement and other aggregate. 3.The autoclaved aerated concrete block production line process: (1).aerated concrete/aerated blocks raw material preparation and storage: we will use jaw crusher, ball mill, bin and bucket elevator. (2).Aerated concrete/aerated blocks Ingredients, mixing, pouring: needs mixer, casting machine, screw conveyor, belt conveyor, batching system control , the aac mould and so on. (3).aerated block static stop maintenance. (4).aerated block cutting section. aac cutting machine/aerial tumbling cutting units is important. (5).aerated block coding ,autoclaving and finished product. 4. Sand formulation Parameter Name Parameter Value sand 62% lime 18-22% cement 10-12% gypsum 3% Aluminum powder 0.0007-0.0008% 5. Fly ash formulation( alternatively) Parameter Name Parameter Value fly ash 68% lime 18% cement 6-8% gypsum 2-3% Aluminum powder 0.0007-0.0008% 1. Main huge equipment in nude; 2. Breakable and fragile packed in wood crate or composite board crate; 3. Package according to client¡¡¥s demand.
(1).More advanced design; 4. The hydraulic full automatic dys850 brick machine is main machine for autoclaved brick production line. The production line of autoclaved brick plant with hydraulic full automatic dys850 brick machine: The massive lime crushing, grinding with stone breadcrumbs, fly ash/lime-sand after respectively storage, after respectively metering, mixing with water, digestion, wheel grinding machine crushes the mixture, and then sent to dys430 automatic hydraulic brick making machine, forcing molding.Automatic setting machine put the finished-blocks into autoclave car, within the autoclaves for maintenance by ferry vehicle, after out from autoclave kettle, the finished brick will be sent to finished product yard, store 10 days before sold. Empty autoclaved car after cleaning to return automatic brick machine for next turn. 1. Main equipments are in nude package, the easily lost, damaged, damped, broken ones will be packed in wood crate or composite board crate. 2. We will also satisfy what kind of package style customers need in particular situation, such as the plastic shrink bag.
Provide the heat-treated boron and carbon steel Provide thickness of 16-60mm end bits and double-bevel cutting edge Provide ripper shank with point and protector Provide original equipment manufacture Provide customized services
