LED Bulbs Product Description : A good replacement, for already exsisting GLS, bulbs, It comes in various, wattage- 7W, 9W, 12W Etc Product origin : Made by Surya Roshni Ltd MOQ : 500 units Key features : 1. Saves energy 2. High brightness 3. Lasts upto 25000 hrs
Product parameters and certification Safety approvals:CQC/UL/VDE Approval standardGB/T3667,UL810,EN60252 Climatic category25/70/21,25/85/21,40/70/21,40/85/21 Rated voltage150VAC~600VAC(50-60Hz) Capacitance range1uf~80uf Capacitance tolerance+_5%(J),+_10%(K),+10%(U),-5%(U) Testing voltage Between terminals2*Un(VAC)/5s Between terminals and case2*Un+1000(VAC)/5s(>=2000VAC) Insulation Resistance(20) Between terminals>=2000MΩ,UF(500VDC,5s) Tangent of loss angle(20)
Product parameters and certificationï Safety approvals:CQC/UL/VDE Approval standardGB/T3667,UL810,EN60252 Climatic category25/70/21,25/85/21,40/70/21,40/85/21 Rated voltage150VAC~600VAC(50-60Hz) Capacitance range1uf~80uf Capacitance tolerance+_5%(J),+_10%(K),+10%(U),-5%(U) Testing voltage Between terminals2*Un(VAC)/5s Between terminals and case2*Un+1000(VAC)/5s(>=2000VAC) Insulation Resistance(20) Between terminals>=2000MΩ,UF(500VDC,5s) Tangent of loss angle(20)
Product parameters and certification Safety approvals:CQC/UL/VDE/TUV/CL Approval standardGB/T3667,UL810,EN60252 Climatic category25/70/21,25/85/21,40/70/21,40/85/21 Rated voltage150VAC~600VAC(50-60Hz) Capacitance range3uf~100uf Capacitance tolerance+_5%(J),+_10%(K),+10%(U),-5%(U) Testing voltage Between terminals2*Un(VAC)/5s Between terminals and case2*Un+1000(VAC)/5s(>=2000VAC) Insulation Resistance(20) Between terminals>=2000MΩ,UF(500VDC,5s) Tangent of loss angle(20)
Product parameters and certification Safety approvals:CQC/UL/VDE/TUV/CE Approval standardGB/T3667,UL810,EN60252-1 Climatic category25/70/21,25/85/21 Rated voltage250VAC~500VAC(50-60Hz) Capacitance range0.1uf~35uf Capacitance tolerance+_5%(J),+_10%(K) Testing voltage: Between terminals2*Un(VAC)/3s(CQC,VDE,TUV),1.5*Un(VAC)/3s(UL) Between terminals and case2*Un+1000(VAC)/3s(>=2000VAC) Insulation Resistance(20)between terminals and case>=5000/C(100VDC,3s) Tangent of loss angle(20)
Materials Titanium Grade 2 Equivalents: Werkstoff 3.7035 / UNS R50400 Henghongtitan is a supplier of Titanium Grade 2 products: Pipe (seamless and welded in random lengths and cut to size) Fittings (BW and forged fittings) Flanges (ANSI, DIN, EN, JIS) Bar (round, square and hexagonal in random lengths and cut to size) Forgings (Discs, Rings and forgings according to drawing) Plate (Full plates and cut to size) Applications Titanium Grade 2: Titanium Grade 2 is a commercially pure Titanium (CP) and is the most commonly used type of Titanium for industrial applications. Titanium Grade 2 is used extensively for sea water piping, reactor vessels and heat exchangers in the Petrochemical, Oil & Gas and Marine Industries. This is partly due to its low density and corrosion resistance and can be easily welded, hot and cold worked and machined. Chemical analysis Titanium Grade 2: Carbon - 0,08% max. Nitrogen - 0,03% max. Oxygen - 0,25% max. Hydrogen - 0,015% max. Iron - 0,3% max. Titanium - balance Density Titanium Grade 2: 4,50 Titanium Grade 2 ASTM standards: Bar/Billet - B348 Forgings/Flanges - B381 Seamless Tubing - B338 Welded Tubing - B338 Seamless Pipe - B861 Welded Pipe - B862 Plate - B265 Butt-weld fittings - B363
1.Material:Gr2 Gr7 Gr9 Gr12 2.Standard:ASTM B338 3.Size(mm):OD8.0*T(1.0-1.5)*L 4.Application: Industrial Use 1.Specifications: Item name ASTM B338 titanium tube for heat exchanger Standard ASTM B338/B337/B861 Material Gr1,Gr2,Gr3,Gr4,Gr7,G9,Gr12,Gr23 Diameter 3-250mm Length max9500mm Certificate ISO 9001, EN10204 3.2 Certificate Packaging Plywood case lined with foam or as per clients requirements Payment T/T in advance or Irrevocable L/C at sight MOQ 10Kg Lead time Within 3~20 days 2. Allowable Deviation of Outer Diameter (mm) Outer Diameter Allowable Deviation Outer Diameter Allowable Deviation 3~10 ±0.15 >50~80 ±0.65 >10~30 ±0.30 >80~100 ±0.75 >30~50 ±0.50 >100 ±0.85 3. Allowable Deviation of Wall Thickness is not more than±10% of the Nominal WT. 4. Allowable Deviation of Length(mm): L30~110 4 6. Used area: Heat exchangers and condensers All kinds of corrosive fluid transmission pipeline system Titanium bicycle tubes, automobile exhaust pipe Offshore aquaculture 7. OEM and customersâ?? designs are acceptable Nickel(Ni), Zirconium(Zr), Niobium(Nb) etc 8. Final product test: Ultrasonic test, Eddy current test, Hydraulic test, Bend test, Flaring test and so on. Some information to products: -Processing technique: seamless -The diameter of tube is more than 219mm and the max length is 12000mm -Own mature technology and professional workers -Brilliant quality, perfect service, reasonable price offered -Seamless titanium tube can be used in many different areas
Standard:ASTM B337,ASTM SB338,ASTM B861 Material:Pure titanium or alloy titanium. Applications:For heater exchanger,condenser etc. Features:Low density,high specific strength,high corrosion resistance,good thermal stability and excellent thermal conductivity etc. Quality and test: Tests and inspections ensure the materials meet destructive and non-destructive test according to industry and customer specifications.
1)Speicification Range: OD: 1.5mm------500mm WT: 0.15mm------20mm Length: Less than 15m 2)Standard and Materials: ASTM B337-----Gr. 1, Gr. 2, Gr. 3, Gr. 7, Gr. 9, Gr. 11, Gr. 18 ASTM B338-----Gr. 1, Gr. 2, Gr. 3, Gr. 7, Gr. 9, Gr. 13, Gr. 14 DIN17861-----Ti1, Ti2, Ti3, Ti1Pd, Ti2Pd, Ti3Pd, TiNi0.8Mo0.3, TiAl6V4, TiAl3V2.5 3)Final product test: Ultrasonic test, Eddy current test, Hydraulic test, Bent test, Flaring test and so on. 4)The titanium tube's characters: A. Low density but High strength(the strength is 3 double than stainless steel tubes, 1.5 doubles than Aluminum tubes) B. Good corrosion C. Good heat resistance property D. Good Heat transfer performance E. Good chemical resistance to low temperature performance F. Tensile strength is close to its yield strength
Specification 0.05*200mm Surface Bright Processing Rolled MOQ 1kg Features: 1. Low Density and High Specification Strength 2. Excellent Corrosion Resistance 3. Good Resistance to Effect of Heat 4. Excellent Bearing to Cryogenics Property 5. Nonmagnetic and Non-toxic 6. Good Thermal Properties 7. Low Modulus of Elasticity Chemical component / Mechanical Property Chemical Composition Grade UNS DIN O N C H Fe Element content (weight %, max.) Gr1 R50250 3.7025 0.18 0.03 0.08 0.015 0.2 Gr2 R50400 3.7035 0.25 0.03 0.08 0.015 0.3 Gr5 R56400 3.7164/5 0.2 0.05 0.08 0.015 0.4 Al 5.5-6.75 V 3.5-4.5
Density:4.50 g/cm3 Melting point: 1941 K (1668 â??) Boiling point: 3560 K (3287 â??) Discovered: Titanium was discovered by the Reverend William Gregor in 1791. The pure metal was prepared in 1910 by Matthew Hunter, who heated titanium (IV) chloride together with sodium in a steel bomb. Titanium is named after the Titans, the sons of the Earth goddess in Greek mythology. Application: Titanium met is used as an alloying agent with metals including aluminum, iron, molybdenum and manganese. Alloys of titanium are mainly used in aerospace, aircraft and engines where strong, lightweight, temperature-resistant materials are needed. As it is resistant to seawater, titanium is used for hulls of ships, propeller shafts and other structures exposed to the sea. Titanium is also used in joint replacement implants, such as the ball-and-socket hip joint. Titanium is used in several everyday products such as drill bits, bicycles, golf clubs, watches and laptop computers. Available Material: GR.1, GR.2, GR.3, GR.4, GR.5, GR.7, GR.9, GR.12 Type Thickness Width Length Standard Gr1 0.3-30mm
HenghongTitan is a leading supplier of quality 6AL-4V Titanium Sheet, 6AL-4V Titanium Plate, 6AL-4V Titanium Round Bar, 6AL-4V Grade 5 Titanium Sheet, 6AL-4V Grade 5 Titanium Plate, 6AL-4V Grade 5 Titanium Bar. 6AL-4V, TITANIUM GRADE 5: Also known as Ti6Al4V, Ti-6Al-4V, Ti 6-4 or Titanium 6Al-4V Alloy, is the most commonly used alloy. It is significantly stronger than commercially pure titanium while having the same stiffness and thermal properties. Among its many advantages, it is heat treatable. This grade is an excellent combination of strength, corrosion resistance, weld and fabricability. In consequence, its uses are numerous such as for military aircraft or turbines. Titanium 6Al-4V Applications: Alloy 6AL-4V is used extensively in Aerospace, Medical, Marine, and Chemical Processing. It is used for connecting rods in internal combustion engines. Titanium 6Al-4V Specifications: UNS R56400, Grade 5 alloy, Werkstoff 3.7164, Werkstoff 3.7165, EN 3.7164, EN 3.7165 Titanium 6Al-4V Available Forms: Titanium 6AL-4V Sheet, Titanium 6AL-4V Bar, Titanium 6AL-4V Plate Titanium 6AL-4V Sheet, Titanium 6AL-4V Plate
Material:Gr1,Gr2,Gr4,Gr5,Gr7,Gr9,Gr12,Gr23 Specification:ASTM B265,ASTM F67/F136,AMS4911 Thk:0.5-60mm Size: Thickness(0.5mm-0.7mm)*Widthâ?¤1000mm*Lengthâ?¤2500mm Thickness(0.8mm-4.0mm)*Widthâ?¤1500mm*Lengthâ?¤3000mm Thickness(5.0mm-50mm)*Widthâ?¤2600mm*Lengthâ?¤12000mm Thickness(60mm-100mm)*Widthâ?¤2600mm*Lengthâ?¤4000mm Application:Industry,medical material for surgical implant,civil,aviation and so on
1. Grades: Gr1, Gr2, Gr3, Gr5, Gr7, Gr9, Gr11, Gr12, Gr23 or as order 2. Standard: ASTM B348, ASTM F136, ASTM F67, AMS 4928, ISO 9001-2008,SGS test 3. Specification of titanium bars: DiaÃ?Length0.8-270Ã?100-5000 (mm) 4. The usage of various Titanium bars // detailed description: (1). Gr 1 can be used in the drawing parts for its good elongation and excellent corrosion-resistance. (2). Gr2 is used most widely in the commercially pure titanium (3). Gr 3 is almost used in pressure,vessel. (4). Gr 4 can be used in some fittings parts and fastening pieces, but for complex shape need 300 degree Celsius to form. (5). Alloy Gr 5(Ti-6Al-4V) widely used in the titanium alloys because of its comprehensive mechanical and chemical properties. (6). Alloy Gr 7 add little palladium in cp titanium and it has the most excellent corrosion-resistance,of course it costs higher. (7). Alloy Gr 9(Ti-3Al-2.5V) is the most widely used in the golf clubs and bicycle girders. (8). Alloy Gr 23, ELI(extra low interstitial),can be used in the medical appliance. 5. Related documents will be provided when delivery. 6. International Quality Management System ISO 9001:2008 7. The third party test is accept
Tolerance: H8 or H9 Surface: Bright ASTM F136 / ASTM B348 / AMS 4928/ AMS 4965 The titanium rods of our company produces have the following advantages: 1. Offer third-party inspection reporting. 2. Short delivery time. Semi-finished products of the above designations have a consistent stock. Products will be finished in 3 days to 20 days as soon as an order is placed. 3. Price Advantage: Our products start from titanium sponge, and do not go through any intermediate processes, so we can provide a competitive price. General knowledge about titanium: 1. Atomic weight: 47.90 2. Density: 4.51, light 3. Nonmagnetic 4. Melting point: 1668°C±4°C Titanium Merits: 1. Titanium (titanium alloy) is a strong metal with low density. It has high tensile strength, and the tenacity (tensile-to-density ratio) of titanium is almost the highest among that of all metal materials between -253°C to 600°C. 2. Excellent resistance to acid, alkali, and marine corrosion. 3. Nonmagnetic, low linear expansibility Usages: 1. Aircraft manufacturing 2. Naval construction 3. Used for saltwater desalination, heat exchangers, reaction towers, distillers, washing towers, hybriders, valves, tubes, pumps, pipelines, electrolysis electrodes, electrobath containers and anode superstructures for industries involved in petrochemistry, fiber, pulp, fertilizer, acid and alkali, sodium, chlorine, electrochemistry, and so on. 4. Metallurgy industry Corrosion-resistant material for smelting nickel and cobalt, titanium,zinc. Deoxidizing agent and alloy material for steel manufacturing. 5. Health and hygiene Materials for making medical apparatus and instruments for orthopedic surgery.
1.Grade: Gr1, Gr2, Gr3, Gr4, Gr5, Gr6, Gr7, Gr9, Gr12, Gr23 2.Standard: ASTM B348 ASTM F4928 ASTM F67 ASTM F136 3.Condition: R or M or Y 4.Specification:Diameter:6mm---350mm 5.Length: 300mm---6000mm 6.Tolerance:H7---H13 7.Product type:Ti round bar,Ti square bar,Ti fat bat,Ti hexagonal bar 8.MOQ:1PC 9.Density:4.51g/cm 10.Material:pure titanium and titanium alloy
Standard: ASTM A213 /ASME SA 213, ASTM A269/ASME SA269 , A312, A511, A789, A790, A376, EN 10216-5, EN 10297,DIN 17456, DIN 17458, GOST 9941, GOST 9940, JIS G3446 JIS G3447 JISG3448 JIS G3459 JIS G3463 JIS G 3468 Material: TP304/304L/304H, 316/316L, 321/321H, 317/317L, 347/347H, 309S, 310S,S31803,S32205, S2570,S32760,S32304, 904L SUS304TP SUS304LTP SUS304HTP SUS316TP SUS316LTP SUS316HTP, SUS321TP, SUS321HTP, SUS347TP, SUS347HTP, SUS310STP SUS317TP, SUS890LTP EN1.4301, 1.4306, 1.4948, 1.4401, 1.4404, 1.4571, 1.4541, 1.4833, 1.4878, 1.4550, 1.4462, 1.4438, 1.4845. Nominal Dia: 1/2 "to 32" NB for seamless pipe Schedules: 5S, 10S, 40S, 80S, 10, 20, 30...120, 140, 160, XXS All dimensions are in accordance with ANSI B36.19 and ANSI B36.10 Size Range for tubing: OD:1/4" (6.25mm) to 8" (203mm), WT 0.02" (0.5mm) to 0.5"(12mm) Length: 30 m(Max) or as your requirement Process: Cold drawn, Cold rolled, Precision Rolled for Seamless Pipe or Tube Finish: Annealed & pickled, bright annealing, polished Ends: Beveled or plain end, square cut, burr free ,Plastic Cap at Both end Packing: Bare packing/bundle packing with woven bag/wooden or steel frame crate packing/plastic cap protection at the both sides of tubes and suitably protected for sea-worthy delivery or as requested
Specification: Seamless:O.D 1.5mm---450mm WT 0.15mm---55mm Weld: O.D 6.5mm---2000mm WT 0.5mm---40mm Standard: ASTM A312ã??ASTM A213ã??ASTM A269ã??ASTM A511 ASTM A789ã??ASTM A790 JIS3463ã??JIS3459ã?? DIN2462ã??DIN17458ã??DIN17456 Material: 304(0Cr18Ni9)/304L(00Cr19Ni10) 321(1Cr18Ni9Ti)/321H(0Cr18Ni10Ti) 310S(0Cr25Ni20)/347H(0Cr19Ni11Nb)/2205(S31803) 316(0Cr18Ni12Mo2)/316L(00Cr17Ni14Mo2)/316Ti(0Cr18Ni12Mo2Ti) 317L(00Cr19Ni13Mo3) TP410 TP420 etc.
Features: 1) Commodity: seamless and welded austenitic stainless steel pipes 2) Process method: cold drawn / cold pilgered 3) Surface finish: annealed / cold pilgered 4) Material: TP304, TP304L, TP310 / S, TP316L, TP316 / 316L dual grade, TP317L, TP321, TP347 5) Standards: ASTM (ASME) SA / A312 / M /A213/A269/A789/A790/A270 6) Size: a) NPS: 1/8" to 10" b) Schedule: 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S, according to ANSI B36.19/36.10 c) O.D.: 0.405" to 10" d) W.T.: 0.049" to 1.125" 7) Length: max. 13 meters 8) Delivery conditions: annealed and pickled 9) Applications: for fluid and gas transport; structural and machining applications
1) Voltage: 110/220-240V 2) Power: 1000W 3) Stainless steel cover 4) Temperature control 5) Cover with light indicator 6) Non-Stick Cooking Surface
