Feedstock liquid gas, heavy end diesel blendstock, light end, dry pyrolysis gasoline dpg pygas, light naphtha, raffinate c6 non aromatic, raffinate 1 2 c4, reformate, butadiene, c3cut, c5 cut naphtha, mtbe condensate, cracked fuel oil cfo, aromatics, para xylene px, cg aromatic, hydrotreated naphtha htn, benzene, mixed xylene mx, styrene monomer sm, ortho xylene ox, heavy aromatic, base chemicals, methanol, mono ethylene glycol meg, ethylene dichloride edc, toluene di isocyanate tdi, sulphur, pta, vinyl chloride monomer, bisphenol a, acetic acid, polymer, hdpe, ldpe, lldpe, pp, pvc, pet, sbrpbr, abs, gpps hips, poly carbonate pc, fertilizer, ammonia, urea.
Sulphuric acid 98% min, hydrochloric acid, white dextrin/ cationic , tarch/modified starch, castor oil & derivatives , turkey red oil (tro) , liquid glucose food grade, malt extract liquid and powder, sorbitol 70% noc bp/usp grade, pdcb ( para dichloror benzen), caustic soda flakes and prills fortified rosins, cationic dry strength resin for paper, alkyl ketene dimer wax emulsion, surface sizing agent for paper, yellow dextrin/white dextrin water treatment chemicals, benzalkonium chloride( bkc)80% & 50% biocide, aluminium sulphate ferric/non ferric, poly aluminium chloride calcium hypo chloride,phosphonates (atmp/dtpmpa), ferric chloride meko , paint driers, mining and drilling products,xanthates (sipx, pipx, pax, pibx, pex, ), alcium chloride prills 97 and powder.
Phenols and ketonesphenol, mibk polyurethanepolyurethane (pu), propylene oxide (po), tdi, soft foam polyether, hard foam polyether, high resilience polyether, elastomeric, polyether, mdi, 1,4 butanediol (bdo), resinbisphenol a, epichlorohydrin, epoxy resin, intermediates rubber additives, flame retardants, lignin, accelerators (antioxidants), plasticsolycarbonate (pc), pp, engineering plastics, glass fiber, olefinsethylene, propylene, butadiene, isobutene, pure benzene, styrene alcoholsoctanol, isopropanol, ethanol, diethylene glycol, propylene glycol, n propanol, acidsacrylic acid, butyl acrylate, mma, chemical fibresacrylonitrile, polyester staple fiber, polyester filament, plasticizersbutyl alcohol, phthalic anhydride, dotp.
Rubber accelerator dpg Chemical name:diphenyl guanidine Molecular formula:c13h13n3 Cas no:102-06-7 Specification: Appearance Gray-white powder Initial m.P. Oc 144.0 Heating loss 0.40 Ash 0.40 Residues on sieve(150m), % 0.10 Properties:grayish-white powder. No taste, no poison. Densiy is 1.08-1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in ccl4; insoluble in water and gasoline. Application:used as a secondary accelerator with thiazoles and sulphenamides in nr and sbr compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. Dpg can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process Packing: 25kg in kraft paper bag with pe bag inside, or 25kg in plastic woven bag with pe bag inside, or as customers request. Storage:keep in a cool, well-ventilated place. The shelf life is 2 years. Notes: the products could be oil coated powder, as per customers request.
Particle Activated Bleaching Earth(clay) Appearance: The product is divided into two types:water-resistant natural particles and extruded short columns. Products is used for the refining of olefin extractant and aviation kerosene in benzene extraction unit, as well as catalyst for condensation and polymerization. The products particle size be divited into 8-20mesh,8-60mesh,20-60mesh,50-100mesh,according to customer demand. also widely to the oil industry,chemicla industry,daily chemical industry as decolorrant and as the remover of impurities as alkene and carbonyls composite etc It is characterized by good adsorption,base exchange and compressive strength. a)Name of product: Particle Activated Bleaching Earth(clay) b)Price of product: USD330-430perMT FOB Dalian port,China C)Product origin: China d)Key Spesifiction/specia Feaders: The product is divided into two types:water-resistant natural particles and extruded short columns. The particle size be divited into 8-20mesh,8-60mesh,20-60mesh,50-100mesh,according to customer demand. It is characterized by good adsorption,base exchange and compressive strength Payment Term:T/T or L//C,Delivery Time:Shipment with 10 working days. e)H.S.:3802900090 f)Mininum order: 20feet container g) Packing detail: Paching:Jumbo woven bag of 1000kg/woven bags/kraft paper of 25kg or ccording to customer requirements.Store in a ventilated ,cool and dry place.
1,2,3-Benzotriazole(BTA) CAS NO.: 95-14-7 HS CODE: 2933990090 Chemical formula: C6H5N3 Molecular weight: 119.13 Structural formula: Properties: Pure product is white needle crystal, Melting point96-99°C, boiling point:204°C(15mm mercury column),slightly soluble in water, soluble in organic solvents such as alcohol, benzene, toluene, chloroform. Appearance :White crystal or sheet, granular, needle-like, powdery Purity(%) :â?¥99.5 Melting point(°C): 96-99 Water content(%):â?¤0.1 Ash content(%) â?¤0.05 PH value:5.5-6.5 USE: Mainly used in the metal's(silver,lead,nickel,zinc,copper) antirust and corrosion moderating, widely used in antirust oil, copper and alloy copper's moderating corrosion, water circulation treatment, antifogging agent,macromolecule stabilizer,plant growth regulator, lubricating oil additive, ultraviolet absorber etc.. This product also can cooperate with many kinds of dirt prevention and germs killing,especially and household detergent to the corrosion. Packing: 20kg woven bag or on the clients' requirements. Storage : Stored in draughty, dry place. Do not put it together.
Other names: 2-Propenoic acid, 2-methyl-3-phenyl-; Cinnamic acid, α-methyl-; 2-Methyl-3-phenyl-2-propenoic acid CAS No.:1199-77-5 Molecular formula: C10H10O2 Molecular weight:162.188 g/mol Molar mass:162.06808 g/mol Melting point:79-81 centigrade Boiling point:288 centigrade Flash point:382.00 °F Refractive index:1.6000 (estimate) Properties:white crystalline powder, insoluble in water, soluble in organic solvents such as ethanol and benzene. Purity : greater-or-equal99% Packaging :25Kg / bucket Storage method:Keep the storage sealed and stored in a cool, dry place, ensuring good ventilation or exhaust in the workplace Usage :Pharmaceutical intermediates, generally used in organic synthesis. Alpha-methyl cinnamaldehyde is a versatile fragrance commonly used in the fragrance of cosmetics, soaps, foods, etc. The Alpha-methyl streptopropane obtained by the further reaction thereof is used as a synthetic essence and also has a very good aroma. At the same time, α-methylcinnamaldehyde is also an important intermediate for the synthesis of the therapeutic drug epalrestat. As the number of diabetic patients increases, the demand for the drug increases, and the demand for intermediates also increases, and there is an urgent need to improve the process to improve quality.
Othernames:y-phenylpropanol;phenylpropanol;livonal;3-phenyl-1-propanol; 3-phenylpropanolalcohol;(3-Hydroxypropyl)benzene;3-Benzenepropanol CAS No.:122-97-4 Molecular formula:C9H12O Molecular weight: 136.19 Molar mass:126.32 Melting point: 18 °C(lit.) Boiling point: 119-121 °C12 mm Hg(lit.) Flash point:109 degree C Refractive index:1.5271 Properties: 45.65 Purity:99% Packaging: 200kg blue barrel Storage method:dry and cold Usage: Commonly used in medicine and perfume synthesis. In the pharmaceutical industry, it is an intermediate of prednisone, a central skeletal muscle relaxant. This product has a sweet floral aroma and sweet candied aroma. After dilution, it has a fresh and pleasant melon and fruit aroma. Natural products exist in strawberries, fungal balm, benzoin balm, tea leaves, cinnamon leaf oil, etc. China's GB2760-86 stipulates that it is a food flavor that is temporarily allowed to be used. GB 2760-1996 stipulates that it is a food flavor that is temporarily allowed to be used. It is mainly used to prepare nut flavors such as peach, apricot, plum, watermelon, plum, strawberry and walnut, hazel.
English name:alpha-Methylcinnamic acid Other names: 2-Propenoic acid, 2-methyl-3-phenyl-; Cinnamic acid, α-methyl-; 2-Methyl-3-phenyl-2-propenoic acid CAS No.:1199-77-5 Molecular formula: C10H10O2 Molecular weight:162.188 g/mol Molar mass:162.06808 g/mol Melting point:79-81 centigrade Boiling point:288 centigrade Flash point:382.00 °F Refractive index:1.6000 (estimate) Properties:white crystalline powder, insoluble in water, soluble in organic solvents such as ethanol and benzene. Purity : greater-or-equal99% Packaging :25Kg / bucket Storage method:Keep the storage sealed and stored in a cool, dry place, ensuring good ventilation or exhaust in the workplace Usage :Pharmaceutical intermediates, generally used in organic synthesis. Alpha-methyl cinnamaldehyde is a versatile fragrance commonly used in the fragrance of cosmetics, soaps, foods, etc. The Alpha-methyl streptopropane obtained by the further reaction thereof is used as a synthetic essence and also has a very good aroma. At the same time, α-methylcinnamaldehyde is also an important intermediate for the synthesis of the therapeutic drug epalrestat. As the number of diabetic patients increases, the demand for the drug increases, and the demand for intermediates also increases, and there is an urgent need to improve the process to improve quality.
Product name: Cinnamic Acid Synonyms: trans-Cinnamic acid; trans-3-Phenyl-2-propenoic acid; 3-Phenylpropenoic acid; Cinnamylic acid; 2-Propenoic acid, 3-phenyl-, (2E)-; 3-Phenylacrylic acid; 3-Phenylacrylic acid CAS NO.: 140-10-3 Melting point: 133 degrees Celsius Boiling point: 300 degrees Celsius Density: 1.248 Refractive index: 1.5049 Flash point: >230 degrees Fahrenheit Storage temp.: Store at RT. Solubility: 0.4g/l PH: 3-4 (0.4g/l, H2O, 20 degrees Celsius) Form: White Crystalline Powder Content: 99% Packaging: 25kg kraft paper bag Storage method: pay attention to the fire source, especially to avoid sunlight, and store it in a cool place. Solubility: Soluble in ethanol, methanol, petroleum ether, chloroform, soluble in benzene, ether, acetone, glacial acetic acid, carbon disulfide and oil, insoluble in cold water.
Chemical Name:Zinc diethyl dithiocarbamate Molecular Formula:C10H20N2S4Zn Molecular Weight: 361.93 CAS NO:14324-55-1 EINECS NO.: 238-270-9 Specification: Item Powder Oiled powder Granule Appearance (visual inspection) white powder(Granule) Initial M.P. oC� 174.0 174.0 174.0 heating loss %� 0.40 0.40 0.40 Zinc content % 17.5-19.0 17.2-18.7 17.2-18.7 Residues on sieve(150μm), % � 0.10 0.10 Residues on sieve(63μm), % � 0.50 0.50 Oil content, % \ 1.0-2.0 Granule diameter, mm \ \ 1.5-2.5 Properties:White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in alcohol, insoluble in gasoline. Application:ZDEC is used as primary or secondary accelerator for NR, SBR, IIR or EPDM; also used for natural rubbers or synthetic latex; as anti-oxidant for rubber-based adhesives. Packing:25kg in kraft paper bag with PE bag inside. Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
Phthalic Anhydride (PA) White scaly or Crystalline powder, Molecular formula C8H403, Molecular weight 148.12, Melting point 131.1l , Boiling point 284.5 , Flash point 151 (close), 165 (open), Spontaneous combustion point 584 , Density (Solid) 1.527g / cm3, insoluble in water, soluble in water, alcohol, ether, benzene and most organic solvents. Phthalic anhydride is a cyclic anhydride, is an important chemical raw material, especially for plasticizer manufacturing. Dibutyl phthalate, Dioctyl phthalate are important plasticizers. Phthalic anhydride and polyols (such as glycerol, pentaerythritol) can generate polyarylate resin in condensation way, used in paint industry; if an unsaturated acid with ethylene glycol happening condensation, the resulting chemicals is unsaturated polyester resin, for the manufacturing of insulating paint and glass fiber reinforced plastics . Phthalic anhydride is a raw material of benzoic acid, terephthalic acid, also used in pharmaceutical synthesis. Top gradeFirst gradeQualified product Appearancewhite scaly or Crystalline powderwhite scaly or Crystalline powder with other colors Melting Chroma, Chroma2050100 Thermal stability Chroma, Chroma50150 Sulfuric acid Chroma, Chroma40100150 Crystallization point130.5130.3130.0 Purity, % 99.599.599.5 Mass fraction of free acid, % 0.200.300.50
Chemical Name:N-Cyclohexyl-2-benzothiazole sulfenamide Molecular Formula:C13H16N2S2 Molecular Weight: 264.41 CAS NO:95-33-0 EINECS NO.: 202-411-2 Specification: Appearance Gray-white powder Gray -white granular Initial M.P. oC� 98.0 98.0 heating loss %� 0.30 0.30 Ash%� 0.30 0.30 Residues on sieve(150μm), % � 0.10 Properties:Gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. M.P.: 98oC above. Soluble in benzene, boluene, chloroform, CS2, CH2Cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water, gasoline, acid / alkali with lower concentration Application:CBS has excellent scorching property, high curing rate, high modulus of vulcanized rubbers, wide range of application. It is a sulfenamide accelerator with the highest activity in EPDM. Packing:25kg in kraft paper bag with PE bag inside. Storage:Stored in cool, dry and draughty place; avoid direct sunlight; protect against moisture or high temperature. The validity is 2 years.
Dibenzothiazole disulfide Cas no: 120-78-5 Specification: no. Itemunitspecification 1appearance light-yellow powder 2initial m. P. (min)c162.0 3loss on drying (max)%0.40 4ash (max)%0.50 5residues on 63um sieve (max)%0.50 6oil content (*)%0; 1.0--2.0 Properties: a little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: given flat, moderately fast cures in nr and sr. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than mbt. Storage: keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 20kg bag.
Rubber accelerator tmtd Specification: Chemical name:tetramethyl thiuram disulfide Cas no: 137-26-8 Specification: no.Itemunitspecification 1appearance-white powder 2initial m.P. (min)c142.0 3loss on drying (max)%0.40 4ash (max)%0.30 5residue on 150m sieve (max)%0.10 Properties:no odor and poison. Irritating to the skin and the respiratory tract. Specific gravity: 1.38--1.44. Soluble in chloroform, acetone, benzene; hardly soluble in carbon tetrachloride, ethyl alcohol & insoluble in water or gasoline. Application:can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and ev cure systems. Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for epdm. May be used as a retarder in the vulcanisation of polychloroprene rubber with etu. Storage:keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Product Nameï¼? Antioxidant 168 Chemical Nameï¼? Tris-(2,4-di-tert-butyl-phenyl)-phosphite Molecular Formulaï¼? C42H63O3P Molecular Weightï¼? 646.94 CAS No.ï¼? 31570-04-4 HS No.ï¼? 2924299090 EC No.: 250-709-6 Chemical structureï¼? Production Properties: This product is white spherical particle. It is soluble in benzene, toluene, chloroform, cyclohexane and other organic solvents, insoluble in water, alcohol and other polar solvents; Slightly soluble in esters. This product is odorless and tasteless. It has low toxicity, good thermal stability and excellent hydrolysis resistance performance. Specificationsï¼? Item Specification Appearance white spherical particles Melting Point,â?? 183.0-187.0 Volatile,% â?¤ 0.20 Solubility Clear Light Transmittance 425nm ï¼? % â?¥ 98.0 500nm ï¼? % â?¥ 98.0 Acid valueï¼?(KOH)mg/g â?¤ 0.30 Assay,% â?¥ 99.0 2,4-Di-tert-butylphenol ï¼?% â?¤ 0.20 Anti-hydrolyzeï¼?90â??in waterï¼?14hï¼? qualified
Product Name: Antioxidant 1010 Place of Origin: Panjin City,Liaoning Province Chemical Name: Pentaerythrite Tetra-[β-�3�5-di-tert-butyl-4-hydroxyphenyl�-propionate] Molecular Formula� C73H108O12 Molecular Weight� 1177.65 CAS No.� 6683-19-8 HS No.� 2924299090 EC No.: 229-722-6 Chemical Structure: Execution standard� Q/LJ.C010-2010.Company standard of Liaoning Jiakai Refined Chemicals Co. , Ltd. Production Properties: This product is white spherical particle.It is soluble in benzene, acetone and chloroform; Slightly soluble in ethanol, but insoluble in water; It is low volatile, odorless and tasteless; the color will change into green with prolonged illumination. Advantages: 1.The product is white spherical particle,it has no dust or pollution to the encironment of production or usage , no side effect on operating staff. 2.With good fluidity, it is easy to add and measure;it can not block during production or usage so that it can help to improve the efficiency of primary product processing. 3.The product has low volatile components so that it cannot produce bubbles and fisheye when used. It can help to improve the quality of primary products.
Application: In the process of Rubber Compounding they can act as tackifier, reinforcer, extender and processing oil. Specification: Grades/Properties PR-T1100 Testing Methods Appearance Granule Eyeballing Softening Point °C 100 ±3 GB/T4507 (Ring &Ball) Color(Ga.) 3-5# ASTM D-1544 Acid Value (KOHmg/g) �0.5 GB2895 Melt Viscosity (200 °C) cps �230 ASTM D-3236 Flash Point °C Test if need GB261/GB3536 Solubility in Benzene Clear Bromine Value (gBr/100g) 20-100 Package Packed in 25kgs paper bag, pp bag or paper and pp compounding bags;17MT without pallets or 14.5MT with pallets for 1*20 FCL.Also can use 750kgs container sack,15MT with pallets for 1*20 FCL with the type of HR-RT5101; 19MT without pallets or 16MT with pallets for 1*20 FCL.Also can use 800kgs container sack,16MT with pallets for 1*20 FCL. Storage & Defence They are non-hazardous product,It should be stored in dry and cool place with fire fighting facilities.Far away from fire.sunshine, moisture and pollution.
Products Infomation: Viton Tubing Known for its resistance to oils and chemicals, this remarkable material retains its good mechanical and chemical resistance properties at extremely high temperatures better than any other known elastomer. Viton is also a standout material in its resistance to weather-related aging and ozone. In fact, samples weathered in direct sunlight showed little or no change in properties or appearance after 13 years of exposure. Viton's fluid resistance far exceeds that of most other synthetic rubbers. It is resistant to hydrocarbons such as benzene, carbon tetrachloride, toluene, and xylene — fluids that normally act as solvents on rubber, disintegrating the material; leading to tubing failure. Engineers looking for exceptional resistance to petroleum-based fuels, oils, lubricants, and mineral acids at elevated temperatures will often turn to Viton, because most other thermoplastics cannot meet the necessary resistance levels. Usage: widely used for all kinds of strong acid and alkali, steam, hot air, hot oil and other liquid transportation and packing, also used in work environment harsh coat of wire. Customer sizes avaliable upon request .
English name: gelsemine; spiro[3, 5, 8-ethanylylidene-1h-pyrano[3, 4-c]pyridine-10, 3'-[3h]indol]-2'(1'h)-one, 5-ethenyl-3, 4, 4a, 5, 6, 7, 8, 8a-octahydro-7-methyl-, (3r, 3's, 4ar, 5s, 8s, 8as, 9s)- Cas registry number: 509-15-9 Molecular formula: c20 h22 n2 o2 Molecular weight: 322.40 Purity: hplc more than 98% Appearance: white neddle crystal powder Solubility: soluble in benzene, chloroform, ethyl ether, ethanol and acetone, hardly soluble in water. Melting point (experimental)value: 178 degrees centigrade Boiling point (predicted)value: 493.4 more or less 45.0 degrees centigrade | condition: press: 760 torr Density (predicted)value: 1.33 more or less 0.1 g/cm3 | condition: temp: 20 degrees centigrade press: 760 torr Pka (predicted)value: 13.10 more or less 0.40 | condition: most acidic temp: 25 degrees centigrade Botanic source: root of gelsemium elegans (gardn. Et champ.) benth. Pharmacological effect: exciting central nervous, but poisonus. Storage: 2-8 degrees centigrade, keep container tightly in a dry place, out of light.