Aviation Fuel Suppliers and Manufacturers

For pharmaceutical intermediates 2-Cyanophenol Product name 2-Cyanophenol CAS NO.: 611-20-1 MF: C7H5NO Structural type: Properties: Grayish white to light brown powder.Items Specification Appearance White or off white powder Salicylnitrile content, % 98.0 Salicylamide content,% 0.5 water content,% 0.5

1. Chopped basalt fiber Basalt fiber is a kind of inorganic fiber material. Chopped basalt fiber is an inorganic mineral fiber with a length of less than 50mm and can be evenly dispersed in cement concrete. 2. Characteristics of chopped basalt fibers (1) The naturalness of raw materials. Because the raw material for producing continuous basalt fiber depends on the natural volcanic extrusive rock, there are no ingredients harmful to human health except that it is inherently high in chemical stability and thermal stability. (2) Comprehensive performance. Basalt fiber is acid resistant and alkali resistant. It is both low temperature and high temperature resistant. It is insulated and insulated by heat and electricity. Its tensile strength is higher than that of large tow carbon fiber. Its elongation at break is even better than that of small tow carbon fibers. It has high compressive strength, shear strength and adaptability to aging, and has good comprehensive properties in harsh environment. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of steel fiber and polyester fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with asphalt concrete, cement concrete and mortar. The newly mixed basalt fiber concrete has stable volume, good workability and durability, and has superior high temperature resistance, anti-seepage, crack resistance and impact resistance.

1. Basalt short fiber - a new material to replace steel fiber. Basalt short fiber is an inorganic mineral fiber with a length of less than 50mm, which can be evenly dispersed in cement concrete. 2. Characteristics of basalt short fiber (1) the specific gravity of steel fiber is 7.8 and that of cement concrete is 2.5. After mixing, the specific gravity of steel fiber is higher than that of cement, and the cement will sink and have poor dispersion. The specific gravity of basalt short fiber is 2.6, which is basically equivalent to that of cement concrete. After mixing, it does not sink, has good dispersion, is degradable, and is green. The road surface will not be as hard as steel fiber, resulting in car driving noise.. (2) Basalt staple fiber is a real "multifunctional" fiber. Acid and alkali resistance (especially alkali resistance, fully applicable to cement concrete), low and high temperature resistance, insulation and sound insulation. The tensile strength is three times that of steel fiber. The corrosion resistance of basalt fiber is better than that of steel fiber. The compressive strength is 20% higher than that of steel fiber, which is suitable for harsh environment. It has excellent comprehensive performance. (3) Low cost. The price of basalt fiber used in cement concrete is significantly lower than that of 50% steel fiber. (4) Natural compatibility. Basalt fiber is a typical silicate fiber, which is easy to disperse when mixed with cement concrete and mortar. Fresh basalt fiber concrete has stable volume, good workability and durability, and has excellent high temperature resistance, impermeability, crack resistance and impact resistance.

Basalt Fiber Series Fabric 1. Production: basalt fiber fabric is made of continuous basalt fiber textile yarn through warping, weaving and coating. 2. Weaving methods according to requirements: unidirectional cloth, plain cloth, twill cloth and grid cloth. 2. Application: reinforced mesh cloth, fireproof cloth, fishing rod cloth, luggage decoration cloth, electrical insulation cloth, bulletproof cloth, etc. 3. Packaging: 100M / roll (or customized as required). 4. Performance: high strength, high temperature resistance, good electrical insulation, non hygroscopic, acid and alkali corrosion resistance.High temperature resistance 1000 �° C 5. Specification and model: bfw16 * 20-100 (120) BFW: basalt fiber fabric;Completely replace carbon fiber sheet building reinforcement 16 * 20: the warp and weft density of yarn is 16 and 20 pieces / cm respectively; 100: the width of the fabric is 100 cm; (120): the mass per unit area of fabric is 120 g / m2. BFNP5*5-200(160) BFNP: basalt fiber mesh cloth (coated and shaped); 5 * 5: the longitude and latitude mesh size of the cloth surface is 5 and 5mm; 200: the width of the grid is 200 cm; (160): the weight of grid cloth per unit area is 160g / m2.

Produced by Chongqing Hesheng Longgang Technology Co., Ltd. (manufacturer) Basalt fiber reinforcement (new material to replace reinforcement) Product Description: basalt fiber reinforced bar (BFRP) is a new composite material formed by pultrusion process. It is made of basalt fiber as reinforcement, resin, filler and curing agent. Now it has been widely used in construction, highway and bridge constructionã?? Basalt fiber reinforcement can completely replace ordinary steel reinforcement and deformed steel; Compared with ordinary reinforcement, it has strong advantages: (see Annex for technical parameters) 1. The cost is the same as that of ordinary reinforcement; 2. The strength is 200% of the ordinary reinforcement with the same specification and diameter; The tensile strength reaches 1100mpap; The reinforcement is only 450MPa, 3. Basalt fiber reinforcement, especially with high acid, alkali and corrosion resistance, is a kind of electrical insulator that will never rust. 4. Basalt fiber reinforced bar, which is non-magnetic. It has high tolerance to the moisture concentration in cement mortar and the penetration and diffusion of carbon dioxide, and can prevent the corrosion of concrete structure in harsh environment, so as to improve the durability of buildings and bridges. 5. The specific gravity of basalt fiber reinforcement is 2.1g/cm3; The specific gravity of steel and reinforcement is 7.85/cm3; The diameter weight of the same specification is 370% lighter than that of steel reinforcement, and the strength is 200% of that of steel reinforcement. 6. The physical properties of basalt fiber reinforcement are higher than that of steel reinforcement, and the cost is the same as that of steel reinforcement, which is of epoch-making significance to replace steel reinforcementã??

The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient. Basalt fiber roving is a new material to replace glass fiber and carbon fiber

Jet Fuel A1 is a specialized type of kerosene designed for use in aircraft powered by gas-turbine engines. It meets stringent international specifications, ensuring optimal performance and safety for aviation applications. Primary Characteristics: Appearance: Clear to straw-colored liquid. Odor: Characteristic petroleum or kerosene odor. Density: Typically around 0.80 kg/l at 15�°C. Flash Point: Minimum of 38�°C (100�°F). Freezing Point: Maximum of -47�°C (-53�°F). Specifications: Jet Fuel A1 adheres to the stringent international standards set by organizations like ASTM (American Society for Testing and Materials) and DEF STAN (UK's Defence Standard). Applications: Civil Aviation: Preferred fuel for commercial airlines and most civil aircraft. Military: While some military aircraft use Jet Fuel A1, others might utilize specialized fuel blends. Advantages: Stability: Resistant to thermal breakdown, ensuring safe operations in high-temperature environments like jet engines. Purity: Contains minimal contaminants, reducing the risk of engine deposits. Low Freezing Point: Suitable for high-altitude flying where temperatures can be extremely cold.

L/C ,DLC, SBLC payment is accepted, NO upfront, pre-payment. Minimum Order Quantity is 100k/mt if spot. We are one of the most precise on non-sanctioned supply due to strict requests of our clients. We are in direct colloboration with reputable sellers,resellers,retailers,manufacturers and also well known refineries within our portfolio. Both as buyer and seller according to the necessarities in our partnerships. Aviation Jet Fuel is commonly referred to as JP54.Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.

We ANA COMPANY are direct authorized suppliers of petroleum products such as Class 54 and Class A1 jet fuel, D2 Diesel, Virgin D6, LCO, AGO, BITUMEN, JP54, D6, MAZUT, LNG, LPG, ESPO, EN590, JETA1, JETFUEL, UREA 46%, GASOLINE, GAS-OIL and other petroleum products. CIF, FOB, TTO and TTV ORIGIN ; KAZAKHSTAN, OMAN, KYRGISTAN. basis you or your buyer are interested and have accepted the terms, you should send an official ICPO as soon as possible to close the deal. We also have a reputable tank warehouse available to buyers and sellers worldwide to provide warehousing services for all types of petroleum products and FOB Spot transactions. Our warehouse terminals are available in Houston, the port of Rotterdam in the Netherlands and enable the safe transport of goods to any port in the world. Please contact us via the channels below for further information.