With strong industrial experience, we make sure that the packaging is done as per the stated norms, by this; the products that we deliver are absolutely safe from the getting damaged. We are situated in Johannesburg(South Africa) and our well-developed network assists us in meeting the exact requirements of the clients.
High Carbon, Low Moisture & Low Volatile Anthracite Coal. Origin:USA We can supply 50k - 60K MT Per Month on FOB basis. Typical Quality: Vol. (Dry). 4.5 to 6% Ash (Dry). 9.5 to 11% Fixed Carbon 82.5 to 86% Sulfur (Dry). 0.75% BTU /lb. (Dry) 13,600 Moisture (AR). 0.3% Size: 4.75 to 89 mm . If interested in Anthracite coal ,please advise to buyer size requirements and we shall follow up with more information along with COA.
Ningxia Huiheng activated carbon Sales Co. Ltd. Anthracite under the conditions of isolated air, heated to 950-1050 DEG C, after drying, pyrolysis, melting, bonding, solidification, shrinkage and other stages and then made coke, this process is called high temperature coking (high temperature carbonization). Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. In addition to a large number of coke used in iron smelting and non-ferrous metal smelting (metallurgical coke), but also for casting, chemical, calcium carbide and iron alloy, the quality requirements are different. Due to its high mechanical strength, porous structure, good adsorption performance, strong ability to cut pollution, fast filtration speed, long service life and so on. The utility model is suitable for domestic water and industrial water treatment devices. 1.High mechanical strength, broken rate and wear rate of less than 2% (percent by mass). 2. Fixed carbon is greater than 80%, mud content is less than 1.5, the use of long cycle. 3. Product appearance of good gloss, moisture is less than 2.5%, porosity greater than 75%, filtration speed. 4. Chemical stability, non-toxic substances. In the general acidic, alkaline, neutral water are not dissolved. 5. Particles uniform, large gap, low resistance, porous structure is reasonable, good adsorption performance, strong ability to intercept sewage.
Ningxia biyuan activated carbon co., ltd. Sells carbon additive for sale anthracite coal for metallurgy carbon additive carbon, which is finished by series production process. The appearance of black, granular, with developed pores, good adsorption properties, high strength, economic advantages, product features and application range: high fixed carbon content, low sulfur content, stable oil effect, high carbon absorption rate, degree of graphitization the best is to increase the nucleation of molten iron, which is mainly used for smelting cast steel and cast iron. Ningxia biyuan activated carbon co., ltd. Is a professional manufacturer and has about eight years of different filter media production and domestic historical trade. Now we are committed to developing our international trade. We adhere to the principle of "integrity management, quality service". Our employees are professional and sincere, and our prices are fair. Look forward to working with you.
Dear colleagues! our company "lat", llc is engaged in wholesale supplies of coal anthracite. At the moment we can offer you coal of the following brands: Coal products of dry enrichment Fractions(mm): 25-100, 13-25, 6-13, 0-6, 0-100. Heat of combustion: 7300-8400, min 7090, min 7010, min 6860 Ash content, %: no more 9, 0, no more 12, no more 12, no more 19, 6, 12-18 Moisture contents, %: no more 6, 0, no more 7, 0, no more 8, 0, no more 8, 0, no more 8, 0 And also the production of wet enrichment: Fractions(mm): 25-100, 13-25, 6-13 mm Ash content, %: 8, 0, 8, 0-10, 0, no more 11 Our products will undergo examination and will receive certificates of international standards immediately before shipment from the port in the city of rostov-on-don, russian federation. Inspection services will be implemented by sgs. Terms of payment: 100% prepayment or revolver prepaid for each shipped lot. Minimal lot: 500 tons. Terms of delivery: fob, port rostov-on-don (azov sea). * possible delivery to brest-central station (station code 1300007)
Anthracite coal, its main raw material is unique high quality anthracite, with characteristic of low ash and low sulfur.Gas Calcined Anthracite Coal, Carbon additive has two main uses, namely as the fuel and additive. When being used as the carbon additive of steel-smelting, and casting. Besides, it is used extensively in water filtration and in water treatment because of its excellent filtration properties. Anthracite coal is a top quality coal that consists of hard, durable coal particles that come in various sizes. Anthracite is used along with silica sand (dual media system) or with silica sand and filter rock (mixed media system) or by itself (mono media system). Application Undergoing a series of strict processing procedures, the anthracite coal produced by our company is widely used in the water treatment of chemical industry, metallurgy, pyroelectricity, pharmacy, paper-making, printing and dyeing and food industry. Specification: 1-3mm, 1-4mm, 1-10mm, 1-12mm, 1-15mm, 4-12mm Advantages 1.Particle uniformity with great gloss;high mechanical strength; 2.Perfect wear resistance and long life cycle; 3. Non-toxic and no secondary pollution. 4.Stable chemical performance; insoluble in acid, neutral or alkaline water; 5.High adsorption and faster Filtration 6.Good Separation Characteristics 7.Savings water and power in washing.
“ASH” – culm (fraction 0-6 mm) “AS” – pea-anthracite (fraction 6 -13 mm) “AM” – small anthracite (fraction 13 – 25 mm) “AK” – anthracite fist (fraction 50 – 100 mm) “AKO” – nut coal (fraction 25 – 100 mm) All kinds of coal in high content of fixed carbon (91-98%), low content of moisture, sulphur, volatile matter and high specific heat of burning. Anthracite burns quickly without smoke or flame, has high heat emission, is noncoking. It has high density of organic matter (1500-1700 kg/m3) and high electroconductivity. Hardness according to Mohs scale is 2,0 - 2,5.
Anthracite coals Brand name: ash (ã�â�ã�â¨) Size: 0-6 Ash (a, %): 16-19 Moisture (w, %): 7.8 Sulphur (s, %): 1.0 - 1.5 Calorific (kkal/ hr) : 6000 - 6300 Vm (%): 3.5 Delivery: in bulk Price fob: nikolayev or ilichevsk, ukraine: usd 118.00 per metric tonn. Min order 25, 000 mts (try less), in bulk.
Specifications: Sl.No Parameters Guaranteed Limit (1) Total Moisture < 5% (2) Proximate analysis Volatile matter 9- 12% Ash 4-6% Inherent moisture < 2 % (3) Ash Fusion temperature Initial deformation temperature Deg. Celcius min. 1200 Hemispherical temperature Deg. Celcius min. 1340 Flow temperature Deg. Celcius min. 1360 (4) Gross Calorific Value Kcal/kg 7850-8200 (5) Hard Grove Grindability Index (HGI) 76 (6) Sulphur 0.2 to 0.5 (7) Oxygen 1.86% (8) Phosphorus 0.05-0.1 (9) Alkali (K2O+Na2O) As on Ash basis 0.42% & 0.88% (10) Size 30 to 80 mm (+) 80 mm (+) 100 mm (11) Fixed carbon 82-88%. 5000 MT to 15000 MT.
Product Description Using calcined anthracite coal carburizing agent and cast iron using carburizing agent steel, and other materials are also useful for adding to the carburant carburant is applied, steelmaking, iron carbon materials. High quality carburizing agent is essential to producing high quality steel auxiliary additives. Usage: For 1-5 T furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. which can make carbon additive fully absorbed. For greater than 5 T furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
We are Manufacturers & Exporter of Anthracite . Crushed anthracite coal makes an excellent medium density filtration media. Used in various water filtration systems & pressure filters, we provide excellent quality hydro anthracite for use as a filter media in water treatment systems. Our anthracite coal has high carbon content and low soluble impurities and is also suitable for various industrial manufacturing processes. We deal in 2 types of Anthracite coal. â?¢ Anthracite Coal â?¢ Premium Hydro Anthracite (Fixed Carbon 90%) Filtration Anthracite is generally available in the below sizes, though we can also manufacture in different sizes depending on the requirement. We can supply in small as well as in bulk quantity. â?¢ 8 â?? 16 Mesh â?¢ 4 - 8 Mesh
1), High purity - Control the consistency of raw material from the mine resource. - Introduce automatic whole-process equipment to ensure product consistency. 2), Good performance - Increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - Increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3), Fine classification - Various product category, to provide customized carbon raising scheme 4), Cost-saving - Reduce the usage amount of iron, increase scrap consumption, and save raw material cost. For 0-5 T furnace use: While a small amount molten iron in the furnace Or with some molten iron remained. add the carbon additive one-time Then add the other material Which can make carbon additive fully absorbed. For greater than 5 T furnace Mix proper carbon additive with charging material as suggested first, And then along with the increase of furnace charge down into the furnace inside gradually. That is, before the molten metal rising up to about 2/3 height of furnace All carbon additive shall be added It guarantees sufficient melting absorbing time before molten metal out, and improves the absorption of carbon.
Product properties 1high purity - control the consistency of raw material from the mine resource. - introduce automatic whole-process equipment to ensure product consistency. 2 good performance - increase globular graphite amount in the nodular cast iron significantly to promote the graphitization; - increase the graphite crystal nucleus of molten iron, refine graphite in the matrix for more uniform distribution; 3fine classification - various product category, to provide customized carbon raising scheme 4cost-saving - reduce the usage amount of iron, increase scrap consumption, and save raw material cost. How to use 1for 1-5 t furnace: - while a small amount molten iron in the furnace, - or with some molten iron remained, add the carbon additive one-time, - then add the other material. Which can make carbon additive fully absorbed. 2for greater than 5 t furnace: - mix proper carbon additive with charging material as suggested first, - and then along with the increase of charging material gradually, - that is, before the molten metal rising up to about 2/3 height of furnace, - all carbon additive shall be added. It guarantees sufficient melting & absorbing time before molten metal out, and improves the absorption of carbon.
Carbon Additive also called Calcined anthracite Coal, Gas Calcined Anthracite Coal, Carbon Raiser,Recarburizer,etc. The main raw material of our Carbon Additive is Ningxia unique high quality Taixi anthracite, with characteristic of low ash andlow sulfur. Carbon additive has two main usage, fuel and additive. When being used as the carbon additive of steel-smelting, and casting, the fixed carbon may achieve above 95%. Best quality Taixi anthracite as raw materials through high temperature calcined at 800-1200 â?? by the DC electric calciner with results in eliminating the moisture and volatile matter from Anthracite efficiently, improving the density and the electric conductivity and strengtheningthe mechanical strength and anti-oxidation, It has good characteristics with low ash, low resistivity, low carbon and high density. It is the best material for high quality carbon products, it is used as carbon additive in steel industry or fuel.
we are offering high quality Anthracite Coal that is used as a fuel in various industries. Offered coal is processed by making use of advanced techniques in compliance with the defined international industry standards. We test this coal on different parameters of quality to ensure its purity. This Anthracite Coal is extensively used in different industries like chemical, oil, power, thermal & gas, cement, steel, etc. Features: High calorific value Eco-friendliness Optimum purity Long shelf life Anthracite Coal We "Shree Sai Enterprise" is involved in supplying of Metallurgical Grade Anthracite Coal in India.The Anthracite Coal from trusted vendors it has low sulphur and phosphorus contents due to which "Shree Sai Enterprise" has carved a niche for itself as the preferred supply source of coal by leading Ferro Alloys manufactures & Other manufacturers in India. It is generally used in Rolling mills, paper mills and some specific type of foundries to manufacture the different type of products Anthracite Coal finds use as a reductant in Ferro Alloys, Smelters, Steel Plants and Pellet Plants etc. The Low Grade Coal on the other hand, has been successfully used in Cement Kilns, Sponge Iron Plants and Power Plants. It also makes an ideal blend with high volatile matter thermal coal.
G-high calcined anthracite is produced when anthracite is calcined under the temperature of 1240¡ãc in vertical shaft furnaces. G-high calcined anthracite is mainly used in electric steel ovens, water filtering, rust removal in shipbuilding and production of carbon material. Specifications: Gh-cac-1 Fc(fixed carbon) 95% min, ash 4.0% max, vm(volatile matter) 1.0% max, s(sulphur)0.3% max, moisture 1.0% max Gh-cac-2 Fc(fixed carbon) 93% min, ash 5.5% max, vm(volatile matter) 1.5% max, s(sulphur) 0.3% max, moisture 1.0% max Gh-cac-3 Fc(fixed carbon) 90% min, ash 8.0% max, vm(volatile matter) 2.0% max, s(sulphur 0.5% max, moisture 1.0% max Size 1-3mm, 1-4mm, 1-5mm, 4-10mm, or at customers'option. At customers'option