Anionic polyacrylamide Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type. Application introduction PAM series products contain affinity radical and they can dissolve in water easily and play the role of flocculation, filtering-assist, increasing adherence, reducing resistance, coherence, reinforcing and rheologic regulation and can be used extensively. Flocculation property can be used for recovering solid substance, treating various industrial sewage, domestic sewage and purifying water, assisting filtering, treatment of tail coal as well as well-drilling slurry material etc. With the rheologic regulation function PAM can thicken water recover driving agent for oil field to reform ground section, enhance adoption ratio. It can make up fracturing solution to fracture the stratum which is difficult to drill and it also can make up well-drilling solution which can reduce friction and resistance, accelerate drilling speed, improve drilling depth. With the property of adherence and reinforcing of PAM, it can be used for paper-making industry to enhance staying rate of filling material, speed size filterability and white water sediment in the paper and then coagulate to increase the strength of the paper. PAM can be used with polyvinyl alcohol as textile size, this can improve textile process and enhance the property of textile. Usage When use PAM series products, first make up dilute solution, usually 0.01%-0.1%,thus it is easy to mix with treated substance to get the best result. When make up dilute solution, try best to use water that is neutral or doesnf+t contain metallic salt. When make up solution, usually the temperature is between 50-60fª. When used as paper-making staying-assist agent, density couldnf+t be too high, other-wise the paper size will appear flocculation, usually it is between 100-300 PPM. When used as flocculation agent it is necessary to select type and size of PAM series products according to PH value of treated substance. =+ Anionic PAM is suitable for higher density, inorganic suspension substance with positive charge and PH value is neutral of basic solution with thick suspension particles 1mm-10mm. Non-ionic PAM is suitable for separating mixed organic and inorganic suspension, the solution is neutral or acid. Cationic PAM is suitable for suspension solution with negative charge and containing organic substance.
Anionic Polyacrylamide CAS 9003-05-8 Anionic Pam, Polyacrylamide Features: Appearance: White granule Molecular weight: 5-22 million minimum Granule: 18-80 mesh Solid content: 88% minimum Hydrolyzing degree: 10-20%,20-30%or30-40% Dissolving time: Half an hour-one hour insoluble: 0.5% maximum Monomer free: 0.05% maximum. Stong sea-worthy packing. Packed in the kraft paper with inner plastic bag with each bag containg 25 kgs.
Specification: It is extensively used in fields such as petroleum, water treatment, paper making, mining and metallurgy, building material, textile, food processing, medicine and pharmaceuticals, and agriculture and forestry, etc. It has functions of flocculation, thickening, drag-reduction, gelation, agglomeration, agglomeration, and scale inhibition, etc. 1 appearance:white granule 2 molecular weight:5-22 million minimum 3 granule:20-100 mesh 4 solid content:88% minimum 5 hydrolyzing degree:10-20%, 20-30% or30-40% 6 dissolving time: less than one hour (normal degree) 7 insoluble:0.5% maximum 8 monomer free:0.05% maximum 25kg paper-plastic composite bag, or following your demand .
Anion polyacrylamide series are high polymerization & water soluble high molecular polymer, it can be used in the petroleum, mineral separation, coal washing, metallurgy, chemical industry, papermaking, textile, sugar making, drug, environment protection, building material and agriculture. Technical index :(company standard:q/ajc002-2006) Trademark molecular weight(million) degree of hydrolysis %solid %available ph residual monomer content% A85** 20-30(adjustable) 35-45(adjustable) 89 5-14 0.05 A75** 18-26(adjustable) 30-40(adjustable) A65** 15-25(adjustable) 25-35(adjustable) A55** 10-20(adjustable) 15-30(adjustable) A45** 8-20(adjustable) 10-25(adjustable) A35** 5-16(adjustable) 6-20(adjustable) A25** 5-15(adjustable) 6-15(adjustable) Uses Oil displacement agent for the tertiary oil recovery The bore mud material of well drilling Industrial waste water treatment Drinking water treatment Auxiliary of papermaking industry Clearing agent of sugar juice in the sugar making industry Additives and adhesive of aquatic feed 25kg paper-plastic composite bag, or following your demand. Its powder can adsorb the moisture and become the block matter, thus it should be kept in dry, cool and ventilating place. .
Anionic Polyacrylamide: It is the white powder. The APAM with the molecular weight of 4,000,000-26,000,000 has good water solubility, and it can be dissolved in water by arbitrary proportion but not in organic solvents. It has the characteristics of high-polymer electrolyte in the neutral and alkaline medium, and it is sensitive to the electrolyte salt. And it can be cross-linked into insoluble gel with the high valence metal ions. Use: (1) Industrial waste water treatment: For the neutral or alkaline waste water with pH value of 7-14, large suspended particles and ions of positive charge, it has the best treating effect, such as the waste water from iron industry, electroplating factory, metallurgical industry, coal washing, etc.. (2) Drinking water treatment: When the drinking water still does not meet the standard after the treatment of the precipitation and filtering, then the APAM can be used as the flocculant. Its dosage is 2%-5% of that of the inorganic flocculants, but the effect of former is dozens of times of that of latter. (3) It can be used for the recycling of the loss of brewers' grains in the alcohol plant and starch in the starch factory. (4) It can be used as the water block agent in the oil field, and also the oil-displacing agent during the tertiary recovery. (5) It can be applied in the paper-making industry. It can be used as the dispersant, retention aid, etc. in the long fiber paper-making, and also the flocculant for the waste water from the paper-making. Effective pH value:7-14 Package:25kg/pack
Item anionic Model bya9236 Appearance white granule powder Solid content ( Molecular weight¡ê¡§million¡ê Degree of hydrolysis¡ê¡ Insoluble matter¡ê¡§ Solution time¡ê¡§min Residual monomer¡ê, Effictive ph value 5-14 25kg paper-plastic composite bag
AppearanceWhite powder Solid Content Molecular Weight 25million Degree of lon% Low Medium high Dissolving time Chemicals PAM will be packaged in inner plastic bags, and further in plastic woven bags with each bag containing 25Kg, it according to your requirements packaging
anionic polyacrylamide Product features anionic polyacrylamide series product is easily soluble in water and nearly insoluble in benzene, diethyl ether and acetone. It is widely used in oil extraction, mineral separation, coal washing, metallurgy, chemical, paper making, textile, sugar making, medical, construction material and agricultural industry. Technical index anionic polyacrylamide index Mode molecular appearance water PH application solid solution rate Min weight(million) solubility range content % residual content % monomer% 7102 10-12 white 10-15 5-14 â?¥89 â?¤60 â?¤0.05 particle powder 7136 14-16 - 25-30 5-14 â?¥89 â?¤60 â?¤0.05 7166 15-18 - 25-30 5-14 â?¥89 â?¤60 â?¤0.05 7186 17-20 - 25-30 5-14 â?¥89 â?¤60 â?¤0.05 Main uses Oil-displacing agent for tertiary oil recovery Drilling fluid material Industrial waste water treating Drinking water treatment Papermaking additive Juice clarifying agent in sugar making industry Aquatic feed additive and binder
Easyfloc Anionic Polyacrylamide, it is anionic flocculant, polymer, also said anionic polyelectrolyte, it is high-molecular polymer and has such properties as flocculability, thickening, shear, resistance diminishing, and dispersion. There are active genes in the molecules. After absorbing the surface, the substance can change the status of surface and will generate hydrogen bond after interaction and absorption with many substances. In the process of water treatment, it can bridge the absorbed particles and thus enable several and even dozens of particles to connect together and lead the cementation particles to conglomerate into large floccules, so that the sedimentation for the particles in the suspension liquid can be accelerated. The product is capable of speeding solution clarification and improving filtration and other effects. It is widely used for municipal and all kinds of industrial wastewater treatment, oil drilling, papermaking, textile, EOR and DRA(DRAG REDUCING AGENT), mineral processing, construction bored pile, soil stabilization, incense making, sludge thickening and dewatering, and others. As a professional Anionic Polyacrylamide supplier and manufacturer, Easyclean Chem has been supplying quality coagulants and flocculants to 30 countries close to 10 years.
Name:PAM Anionic Polyacrylamide 1.CAS NO 9003-05-8 HS Code 3906901000 2.EINECS No 201-173-7 3.MF [CH2=CHCONH2]n 4.appearance white crystal powder 5.Specification: Polyacriylamide Anionic PAM 5-8 million Molecular weight:5-8 million Solid content:Solid content Free monomer:0.025% max Dissolving time :1h max Water Insolubles:0.3% max Hydrolyzing degree:20~30% Size:20-100mesh 6.Application: (1) used for drinking water purification, water purification, municipal sewage sludge, municipal solid waste and industrial effluent; (2) oil field exploration and development, geology, water conservancy,coal exploration. (3) paper-making industry for the clarification of liquid caustic soda, fiber dispersing agent, can improve the beating, the filler retention agents, paper strengthening agent, can be used to improve the treatment rate and the white water recovery; (4) used in textile, carpet industry, sizing, quick-setting cement, synthetic resin coating. Photosensitive polymers, adhesives, dispersing agent, as well as agricultural soil gel, slurry stabilizers, soil amendments; (5) the sugar syrup for the industry to clarify the agent Advantage: 1. Manufacturer of PAM Polyacrylamide 2. 10 years experience in export 3. Free sample 4. Best quaity best price 5. Quickly delivery
Nd clay in drilling fluid. Dispersant In the drilling mud treatment, this product can improve the lubricity and stability of the mud to reduce the water loss, prevent sticking effectively, increase drilling efficiency. Blocking agent The product can generate cross linking under the effect of al3+, fe 3+, ca2+ and other ions, a part of high molecular compound is changed from linear shape into body shapes. The product is not water-soluble, and can be adsorbed on the borehole to block ground layer gaps and to prevent the leakage of drilling fluid. Lubricant The product can be absorbed on the surface of metal or clay particles to form liquid film to change friction on the solid surface into liquid frication, thereby lubricating drill bits and drills, lowering the mud cake frication coefficient, and reducing underground accidents. Fluid loss additive The hydrolysis degree is higher, the hydration group on the molecular chain is more, the hydration is better, and it changes from flocculant into fluid loss additive. Drilling mud should be treated to keep cake 25kg paper plastic bag
Polyacrylamide (PAM)is a kind of water soluble polymer, has unique effect to increase the viscosity of water or to promote the flocculation of particles present in water, it can also reduce the frictional resistance between the liquid. According to the different ion characteristics, PAM has three types: Anionic PAM, Cationic PAM and Nonionic PAM. It is widely used in many fields like Water Treatment, Oil Exploration, Sludge Dewatering, Paper Making, Textile, Sugar Making, Coal washing and Incense Making, etc.
Chemicals, anionic polyacrylamide (APAM), cationic polyarylamide (CPAM), polyacrylamide, PAM.
Polyacrylamide, PAM, polyelectrolyte, flocculant, coagulant, polyaluminum chloride, pac, anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide, trisodium phosphate, zinc chloride, super absorbent polymer, SAP.
Cationic polyacrylamide, anionic polyacrylamide, non-ionic polyacrylamide, zwitterionic polyacrylamide.
Isothiazolinone, CMIT, MIT, MIT, methyl isothiazolinone, BIT, benzoisthiazolinone, oit, octyl isothiazolinone, PHMB, glutaraldehyde, DBNPA, bronopol, TCMTB, DBNE, carbohydrazide, ZPT, 2-phenoxyethanol, methylparaben, iodopropynyl butylcarbamate (ipbc), imidazolidinyl urea, allantoin, methylene dithiocyanate (MBT), anionic polyacrylamide, nonionic polyacrylamide, cationic polyacrylamide.