1) 1 Series Pure Aluminum Panel The commonly used code of Pure Aluminum panel series has: 1050, 1060 and 1100. Pure Aluminum panel Series is the most aluminum content in all aluminum panel series, purity can reach 99%. Because it is not contain other technology, so the production process relatively single, price will relatively cheaper than other aluminum panel series. Also it is the most conventional use series in industry nowadays. Most of circulation series in the market is 1050 and 1060. 2) 2 Series Aluminum Alloy Panel 3) Representative is 2A16 (LY16) and 2A06 (LY6). The features of 2*** aluminum alloy panel series is the hardness is higher than other aluminum panel series, itâ??s because it has 3-5% copper content, much higher than other aluminum series. So that 2*** series normally used as aviation aluminum material, not frequently use in common industry. 3) 3 Series Aluminum Alloy Panel 4) Representative is 3003, 3004 and 3A21. The main components of 3*** series aluminum alloy panel is manganese element, it contains 1-1.5% manganese element in aluminum alloy panel, so the advantage of this series is it has a good Anti-rust function. Conventional used in wet environment like: air conditioning, refrigerator and vehicle bottom. Although price is higher than 1*** series, but it still commonly use in Alloy series. 4) 4 Series Aluminum Alloy Panel Representative is 4A01. The main components of 4*** series aluminum alloy panel is silicon content, it contains 4.5-6% silicon content in aluminum alloy panel. Conventional used in building materials, mechanical components, forgoing materials and welding materials because its low melting point and good corrosion resistance. 5) 5 Series Aluminum Alloy Panel Representative is 5052, 5005, 5083 and 5A05. 5*** Series belongs to one of the most common use aluminum alloy panel series, mainly element is Mg, magnesium content is 3-5%, so it is also called: Aluminum-magnesium Alloy. The features of 5*** series is: low density, high tensile strength and high elongation. Aluminum-magnesium Alloyâ??s height will lower than other series when in the same area, so it is very common use in aviation such as aircraft fuel tank. It also widely use in regular industry. The processing technology is continuous casting and rolling, which belongs to the hot-rolled aluminum sheet series so it can be used for deep oxidation processing. In China, the 5*** series aluminum panel is one of the mature aluminum panel series, so the effect of making brush will very good. 6) 6 series Aluminum Alloy Panel Representative is 6061 and 6063, mainly element is Mg and Si, so it both have the advantage of 4*** series and 5*** series. 7) 7 Series Aluminum Alloy Panel Representative is 7075, mainly element is Zn, belongs to aviation series.
Technology: Aluminum Extrusion Normal Anodizing thickness: 8-12 micro Normal Power Coating thickness: 60-100 micro Material: Aluminium Alloy 6063, 6063A, 6060, 6061,6005 Temper available: T4, T5, T6, etc. Characteristic: 1, electrophoretic coating can be fully mechanized, automated, not only reduce the labor intensity, but also greatly improve the labor productivity, suitable for a large number of pipeline operations. 2, electrophoretic coating high rate of lysis in the water completely dissolved or emulsified, prepared into the bath viscosity is very low, it is easy to penetrate into the bag-like structure and the gap, especially for the special-shaped conductive material surface coating Installed. 3, the electrophoresis bath has a high conductivity, the coating ions in the electric field under the action of rapid swimming, in the coated surface is neutralized after the formation of electrical neutral wet paint film, with the wet film thickening resistance increased large, the amount of paint particles deposited gradually become smaller, thus forming a uniform and delicate coating film. 4, the use of high paint, up to 95% or even 100%. Due to the low solid content of the bath, the viscosity is small, the coating is brought out less paint, especially the application of ultrafiltration technology, the implementation of the coating process closed cycle, the paint recovery rate is high. 5, the coating of anti-corrosion ability, electrophoretic coating due to the role of the film in the electric field evenly, so the use of electrophoretic coating method can make the workpiece cavity, weld, edge corrosion resistance significantly improved. 6, electrophoretic coating solution is low, one is conducive to environmental protection, the other is the production of good security.
- High durability with aluminum surface coated with NANO technology - anti-dust and minimize water retention, as well as any impact of the environment. - Thickness range from 2mm to 7mm - Safe with fireproof material inside - Flexible, high bending, and also ensure the hardness to meet the specific requirements of each project - Rich in color, diversified in types of patterns with many types of wood, stone texture helps to replace natural materials. - Easy to install and install under all conditions
At seven panel we use superior pvdf paint of international pvdf Aluminum composite panel. The paint goes through duplex or triplex Coating or high temperature baking to form 25-35 um thick cured film On the surface of the aluminum panel featuring maintenance free design, Great corrosion and weather resistance, and excellent self cleaning and Adhesive properties, the pvdf aluminum composite panel ensures the Building facade maintains brightness and beauty for 10-15 years. 1. Thickness: 2mm, 3m
Products: Alubond/ Aluminum composite panel, Alubond, Aluminum Composite Materials, ACP Panel /ACM Material: 1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting. 2, Core: nontoxic polyethylene. low denisty 3, The back side: aluminum alloy sheet coated with polyester resin primar painting. Specification: 1, Standard size(widthxLength) : 1,220 x 2,440mm 2, Aluminum composite panel thickness:2, 3, 4, 5 mm. 3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm 4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested 5,Nonstandard sizes are available according to customer's requirements. Woooden pallet.
Material: 1, The front side: aluminum alloy sheet coated with fluor-carbon resin (PVDF) or polyester resin (PE) roasting painting. 2, Core: nontoxic polyethylene. low denisty 3, The back side: aluminum alloy sheet coated with polyester resin primar painting. Specification: 1, Standard size(widthxLength) : 1,220 x 2,440mm 2, Aluminum composite panel thickness:2, 3, 4, 5 mm. 3, Aluminum alloy sheet thickness: 0.1, 0.12, 0.15, 0.2, 0.3, 0.4 and 0.5mm 4, Special Width:1,000,1,250, 1,270, 1,350 and 1,500mm1,550mm, etc Length:1,000mm, 2440mm, 3,050, 3,200mm,max 6000mm , as requested 5, Nonstandard sizes are available according to customer's requirements. Wooden pallet.
1. Corrosivity Resistance The high fluorine content of surface fluorine-carbon spraying KYNAR500 resin can effectively resist the erosion of acid rain, air pollution and ultraviolet ray erosion. 2. Self Cleaning Because the special molecular structure of KYNAR500 in Fluorine-carbon coating rests no dust on the surface at all, it tends to be clean. 3. High Strength The high-quality, antirust Aluminium adopted is of high strength. The welding process on the openings greatly improves the stiffness of Aluminium panel and guarantees the resistance of curtain wall against wind. vibration, rainwater leaking, air invasion, thunder, shok and etc. 4. Product Characteristics The Aluminium panels produced by our company use 1100H24, 3003H24, 5005H24 single-layer Aluminium alloy board as baseplates, and the thickness varies from 1.0mm to 5.0mm. 5. The metal panel consists of veneer, reinforcing rib and hanger. Thermal insulation mineral wool could be added on the back of the panel if required, and the hanger could be bent from veneer or be mounted on the veneer additionally. 6. Advantages of Aluminium Curtain Wallboard Light, good rigidity and good strength. Good abrasion resistance and good corrosivity resistance. Easy to process and free to process plane arch, spherical face and other complex geometry. Rich colors, good decorating effects. Difficult to be stained and easy to clean and maintain. Convenient and swift Installation and Construction. Retractable, environment friendly. Strong export woodern boxes.
Alucobest aluminum composite panel is a new decorative material used ever increasingly by developers, designers and architects world wide for various applications. The advantages of using this material over conventional material like stone, tiles and paint are far too many. Alucobest aluminum composite panel also known to many as sandwich panel consists of a polyethylene core sandwiched between two aluminum sheets. These panels are very versatile and can be used in many applications. The entire panel consists of 3 main layers. The top aluminum sheet is coated with either polyester or PVDF paint. The core is either normal polyethylene based or a fr (fire-resistant) core which is specially treated for fire resistance. The bottom aluminum sheet comes in either mill finish or if customers require we can provide a thin layer of polyester paint coat with (6~8um) backside paint
1. Aluminum composite panel Dimensions: 1). Total Thickness: 3mm, 4mm, 5mm, 6mm, 8mm 2). Aluminum foil thickness: 0.15mm, 0.21mm, 0.3mm, 0.4mm, 0.5mm 3). Widths: Standard width of Aluminum composite panel: 1220mm Maximum width of Aluminum composite panel: 2000mm 4). Lengths: Standard length: 2440mm 5). Standard size: 1220 * 2440mm Customized size is available upon request 6). Surface Coating: PVDF, Polyester coating. 2. Aluminum composite panel Raw materials: 1)USA PPG and Sweden Berger fluorocarbon coating 2)High quality aluminum alloy foil of AA3003 and AA5005 3)American DuPont macromolecule sticking film 4)Core material: Fireproof polyethylene or virgin polyethylene or recycle polyethylene (PE) 3. Aluminum composite panel Color: Silver, bright silver, metallic champagne, champagne, copper, ivory, pearl white, pink, metallic grey, violet, ocean blue, jewelry blue, coffee, orange, green, Indian red, stone pattern, crisscross silver, woven + silver, lambency silver, zebra pattern silver, hammer stamp, etc... (Other special colors are also available) 4. MOQ: 1, 000 square meters for each color. 5. Package: Wooden crate 6. Delivery terms: FOB Shanghai 7. Delivery date: Within 15 days after receiving the 30% down payment 8. Payment: T/T with 30% deposit of total amount and 70% balance by T/T before shipping, L/C at sight 9. Certificates: SGS, DIN, RoHS, CE and Intertek 10. Aluminum composite panel performances 1) High formability and stability 2) Diversity of brilliant colours and excellent weather resistance 3) Individual design and simple processing 4) Low weight and large panel sizes. 11. ACP Application: 1) Wall cladding 2) Roof edging 3) Shop front 4) Signs 5) Interior design 6) Cladding of columns / supports. MOQ: 1, 000 square meters for each color. Package: Wooden crate.
Chensheng series aluminum composite panel contain five large categories of interior wallboard, facade panel, wood panel, granite veins board and fireproof board. Chensheng aluminum composite panel adopted anti-rust alloy aluminum plate and high strength polyethylene core board of superior quality. External coating mode of panel is polyester resin or presently internationally most advanced polyester resin paintings dressing , it can stand the test of various kinds of powerful weather and keep its superior quality. Standard size: 1220(width) *2440(length) *3(thickness)mm 1220(width) *2440(length) *4(thickness)mm Special size: Thickness: 2mm, 5mm, 6mm Width: 1000mm, 1250mm, 1550mm Maximum length:6000mm. ACP application: Building exterior curtain walls Decoration of interior walls, display platforms Renovation and reconstruction of old buildings Billboard, signboards and advertisement boards Industrial materials and bodies of automobiles Balcony, fence, indoor compartments. In pallet/wooden case.
Cool goal panel is composed of a polyethylene (pe) core between two aluminum sheets, and coated with polyester resin or extra-durable PVDF (fluorocarbon) resin as a composite structure with excellent character such as fire proof, water proof, heat-insulated, sound-insulated and resistance against corrosion, pollution and wear. Standard size: 1220 (width) x2440 (length) x3 (thickness) mm 1220 (width) x2440 (length) x4 (thickness) mm Standard color: 30 kinds Special size: Thickness: 2mm, 5mm, 6mm Width: 1000mm, 1250mm, 1550mm Maximum length: not more than 6000mm. Application: --> wall curtain, cladding and facade --> roof edges and parapet wall --> dado, separation wall and partition --> advertising plate, showroom and shop front signing --> column covers and beam wraps.
1product structure: 1) protect film 2)coating-basic level(pvdf or polyester) 3)primer 4)aluminum panel 5) macromolecule adhesive 6)polyethylene 7)macromolecule adhesive 8)aluminum panel 9)service coating 2feature 1)multiple colors optional for you 2)innocuous and fireproof 3)light in weight , suitable for highrise position 4)extremely high compound fastness 5)sound proof and shockproof 6)tempetature adaptability 7)weathering resistance of finishing coat 8)it can be sculpted at will Aluminum sheet: 3003 h16 3application Exterior wall curtain, the important project is decorated, the Outer wall of the old building is renovated, the board of the tunnel, wall in The subway, lift room sign, billboard , signboards, kitchen cabinets, eaves, galleries, balconies , partitions, telephone booths, vehicle bodies, yachts, and industrial usage 1. In wooden pallet or in bulk 2.Transporting by container 3. According to your request.
Aluminum sheet thickness: 1)0.50*0.50mm 2)0.45*0.45mm 3)0.40*0.40mm 4)0.35*0.35mm 5)0.30*0.30mm 6)0.21*0.21mm 7)0.18*0.18mm 8)0.15*0.15mm 9)0.12*0.12mm 10)0.08*0.08mm Procduct structure composed: 1) Protective film 2) Coating-basic level(pvdf or polyester) 3) Ground coating 4) Aluminum alloy sheet 5) Macromolecule adhesive 6) Polyethylene 7) Macromolecule adhesive 8) Aluminum alloy sheet 9) Ground coating Material: Front side: aluminium roll-coated with pvdf íííí core: anti-toxic low density polyethylene Rear side: aluminium coated with chrome or polyester Pvdf: polyvinylidene fluoride of ynar500 Coating layer: íípet and fc Total thicknessú¦ 3mm. , 4mm., 1mm (standard)ú+ 2mm, 5mm, 6mm(as require) Widthú¦ 1220mm, 1250mm (standard)ú+1270mm, 1500mm, 1550mm(as require) Lengthú¦ 2440mmú¿standardú¬ú+ any as you require Non-standard sizes
Standard Specifications : Thickness : 4mm (4,5,6mm available) Width : 1020, 1250, 1575mm Length : 2000-6000mm (By request) Aluminum Skins : 0.5x0.5mm PE Core : 3.0mm including Bonding Agent (In case of Total 4.0mm thick). Standard Wooden Packing.