Aluminium Suppliers and Manufacturers

Non-LME Registered Electrolytic Copper Cathode Grade A Cu purity: 99.99% minimum Size: 914mm X 914mm X 12mm / (36â?? X 36â?? X 0.5) Weight of each sheet: 125kgs +/- 2% Net weight of each pallet: 2M/T +/- 2% Minimum weight of each container: �± 20 M/T Gross weight of each container: �± 22.2 M/T ELEMENTS VALUE ELEMENTS VALUE COPPER Cu (min %) 99.99% SILICA (SI/ppm) 0.3 IRON (Fe/ppm) 2 COBALT (CO/ppm) 0.2 SULPHUR (S/ppm) 4 ARSENIC (AS/ppm) 0.1 OXYGEN (O2/ppm) Nil BISMUTH (BI/ppm) 0.1 ARGENT (AG/ppm) 10 MANGANESE (MN/ppm) 0.1 LEAD (PB/ppm) 0.2 TELEURIUM (TE/ppm) 0.05 NICKEL (NI/ppm) 0.2 ALUMINIUM (AL/ppm) 0.5 SELENIUM (SE/ppm) 0.3 MAGNESIUM (MG/ppm) 0.4 ANTIMONY (SB/ppm) 0.1

Lumbo Sacral Belt Product Code: MB-01 Description Specifically designed with two aluminium stays on the back side which are parallel to the spine and four strips. These stays are contoured like the natural curve in the back. The stays can be re-shaped for the finer fittings and completely immobilizes the lumber and sacral regions effectively. This helps in maintaining inward curve while doing all the activities. It is useful in Lumbosacral Spondylolysis, Degenerative Disc Disaease and Induce Spontaneous maintenance of corrective posture and Back Pain.

Dynamic Cock-up Splint Product Code: WB-06 Description Dynamic Cock-up Splint with Aluminium Dynamic Cock up splint provides firm immobilzation for patient comfort, can also be moulded to fit the contour of the forearm and hand, degree of dorsiflexion can be changed by bending , velcro straps ensure firm fitting. It provide th perfect wrist immobilization with a malleable splint. Excerciser and a splint, improves muscle tone. It effectively helps in immobilizing the wrist without restricting the movement of the fingers.

Dual Head Pediatric Stethoscope Product Code: MED D13 Description Features: Light Weight aluminium sand anodized chest piece High Acoustic Sensitivity PVC U shaped Tube available in all colours Soft sealing ear knobs with Metal bush Chrome-plated headset and Comfortably angled Chrome plated Metal ring

100% OPEN&SHORT&MISS WIRE TEST CONDUCTOR RESISTANCE: 0.5FT-7FT CONDUCTOR RESISTANCE:2 Ohm/PCS 14FT-50FT CONDUCTOR RESISTANCE:3 Ohm/PCS TEST INSTRUMENT:CCL-W-IO064 INSULATION RESISTANCE: 5M Ohm(MIN) HI-POT:300V DC Application: RJ45 Connectors. The shielding layer made of aluminium foil allows to minimize crosstalk and interference with the external environment

We are operate in the supply of Aluminum UBC, Aluminium Ingot, Zinc Ingot, Copper Cathode, Copper Rod, Copper Wire, Aluminum scrap, Zinc Ingot, HMS 1 & 2, AC/ Fridge Scrap, Engines Scrap, Battery Scrap, PVC Scrap, HDPE, LDPE and other Metal scrap from wide range extraction materials. We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.

We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titinium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochroniumproducts, ferromanganese products; non-ferro metal products, i.e. stibium ingot, silicon-calcium, siliconmanganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. item value Place of Origin Turkey Brand Name HMS 1&2 Model Number Tur ISRI 200-206 Type HMS Scrap Composition Ferrous Steel Scrap Application Melting HMS Type HMS1 & 2 Product name HMS 1&2 Heavy Melting Scrap Material Used Rail Scrap, HMS1-2, Rail Road Wheels Material #1 Heavy Metal, Plate and Structural Grade ISRI 200-206 Color Black, Painted, or Galvanized Description Consist of Steel Scrap and Wrought Iron Quality Clean Features Free from mud, dust, non ferrous, excessive rust, other impurities Minimum Density 55 lbs. per cubic ft Dimensions 12" max on any direction

We engage in metal materials, metal products, steel products, i.e. ferrosilicon, titanium iron, silicon ferrozirconium, ferrovanadium, ferrowolfranium, mg-ferrosilicon-rare-earth alloy, ferromolybdenum, ferrochromium products, ferromanganese products; non-ferrous metal products, i.e. stibium ingot, silicon-calcium, silicon manganese, zinc-alum alloy, zinc ingot, lead ingot, chrome powder, magnesium ingot, aluminium ingot/ coil/ can/ scrap, copper ingot/wire/ sheet/ scrap, Plastic and Polymer Scrap, Plastic Raw Material Granules, Rubber Scrap, Paper Scrap, etc. Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% HMS 1 / 2 STEEL METAL SCRAP FOR SELL: Iron Scrap HMS1 & 2 C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15%

Hydrofluoric acid It is a sulution of hrdrogen fluride in water,It is a precursor to almost all fluorine compounds, including pharmaceuticals such as fluoxetine (Prozac), diverse materials such as PTFE (Teflon), and elementalfluorine itself. It is a colourless solution that is highly corrosive, capable of dissolving many materials, especiallyoxides. Its ability to dissolve glass has been known since the 17th century, even before Carl Wilhelm Scheele prepared it in large quantities in 1771.[2] Because of its high reactivity toward glass and moderate reactivity toward many metals, hydrofluoric acid is usually stored in plastic containers (although PTFE is slightly permeable to it). Hydrogen fluoride gas is an acute poison that may immediately and permanently damage lungs and the corneas of the eyes.Aqueous hydrofluoric acid is a contact-poison with the potential for deep, initially painless burns and ensuing tissue death. By interfering with body calcium metabolism, the concentrated acid may also cause systemic toxicity and eventualcardiac arrest and fatality, after contact with as little as 160 cm2 (25 square inches) of skin. Application: 1.Oil refining In a standard oil refinery process known as alkylation, isobutane is alkylated with low-molecular-weight alkenes (primarily a mixture of propylene and butylene) in the presence of the strong acid catalyst derived from hydrofluoric acid. 2.Production of organofluorine compounds The principal use of hydrofluoric acid is in organofluorine chemistry. Many organofluorine compounds are prepared using HF as the fluorine source, including Teflon, fluoropolymers, fluorocarbons, and refrigerants such as freon. 3.Production of fluorides Most high-volume inorganic fluoride compounds are prepared from hydrofluoric acid. Foremost are Na3AlF6, cryolite, and AlF3, aluminium trifluoride. A molten mixture of these solids serves as a high-temperature solvent for the production of metallic aluminium. Given concerns about fluorides in the environment, alternative technologies are being sought. Other inorganic fluorides prepared from hydrofluoric acid include sodium fluoride and uranium hexafluoride. 4.Etchant and cleaning agent In metalworking, hydrofluoric acid is used as a pickling agent to remove oxides and other impurities from stainless and carbon steels because of its limited ability to dissolve steel.It is used in the semiconductor industry as a major component of Wright Etch and buffered oxide etch, which are used to clean silicon wafers. In a similar manner it is also used to etch glass by reacting with silicon dioxide to form gaseous or water-soluble silicon fluorides. 5.Niche applications Because of its ability to dissolve (most) oxides and silicates, hydrofluoric acid is useful for dissolving rock samples (usually powdered) prior to analysis. In similar manner, this acid is used in acid macerations to extract organic fossils from silicate rocks.